Premiere was working very well...and this week it will not even get off the boot up screen. Help?
Premiere was working very well...and this week it will not even get off the boot up screen. Help? I can log in on my laptop and it works fine but now it will not boot up on my desktop
Moving this discussion to the Premiere Pro forum.
The Coach what version of Premiere are you using? Which operating system are you using? Do you receive any specific errors when you try to open Premiere?
Similar Messages
-
my xtreme tong-its seems corrupted...before it was working very well, but for several games played it stop working, i tried remove and re-install it but nothing happens. Can you please tell me what to do in fixing this particular game.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I have latest firefox on my desktop and laptop, was working very well since threee years. Sudenlly has stop working both on my desktop and laptop. please help me.
Hello becky81464
If you were able to load websites until you updated Firefox, your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) is likely preventing Firefox from connecting to the Internet, see [http://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet firewalls]
see also : [https://support.mozilla.org/en-US/kb/configure-windows-firewall-allow-firefox-access Configure Windows Firewall to allow Firefox access to the Internet ]
thank you -
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the programHi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda. -
I have already installed Window-7 in my Mac (64 bit). When I downloaded window support software I every time saw network error option on my screen. But network working very well and I can brows webpage. Will someone suggest me support for OSx Lion .
If I remember right there "may" be a problem if you have a proxie settings enabled.
System Preferences/ Network/ Advanced/ Proxies. Can't remember which one or if it was an issue in 10.7 or 10.6. Just make sure their all unchecked and try again.
You might try a search in these forums for more information. Different fix's for different issue's.
Sorry I can't help more......... -
i buy my ipod touch like 6 months ago it was working very well but yesterday it is not connecting to the internet when i am connect to my internet it said unable to connect can you please tell me plz help me
Do other devices successfully connect to the router?
Does the iPod successfully connect to other networks/routers?
Does the iPod show wifi bands in the upper left?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on the router
- Resetting networksettings: Settings>General>Reset>Reet Network Setting
- The troubleshooting here
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
My Ipad works very well by itself but it's not recognized by Win 7 neither Itunes of my PC and my PC's wife.
The Ipad of my wife is well recognized on my PC which means my PC is OK.
I restored everything of my IPAD but when I connected it to Itunes of my PC nothing happened.
What does that mean and what to do ?See if this link helps: http://www.apple.com/support/ipad/assistant/itunes/
-
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.
-
Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts? -
After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.
Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally. -
I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!
Try:
HT2519 Pre-ordered album, it says...: Apple Support Communities -
my iphone 4 will not get off the apple logo screen.
I've been trying to rest it for several hours with no luck.
It also doesn't do anything when plugged into my mac,
itunes will not recognize it at all.
what should i do?
thank you !Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button, for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then click the Restore button of iTunes.
-
I use aperature 3. For the past 2 days, I have been unable to open the aperature application. The icon does not even bounce in the dock. I keep my aperature library on a 2 tb external hard drive. I have never had this problem. Any thoughts? Thanks
For the past 2 days, I have been unable to open the aperature application.
What happened directly before this started? Have you updated software, installed something new, imported new images? Run any applications to clean the mac?
And what is your Aperture version and MacOS X version? Is your profile signature still current (MacBook Pro, Mac OS X (10.7.2), i just upgraded to lion)?
Have you checked, if Aperture is still installed in your Applications folder? Does it start, if you click it directly in Applications and not from the Dock? Does Aperture start, if you click it while holding down the ⌥-key and select a different aperture library not on your 2 TB drive?
Regards
Léonie
Maybe you are looking for
-
How to calculate a number of calendar days from a start date (e.g. 60 days from 3/10/2012)
How to calculate a number of calendar days from a start date (e.g. 60 days from 3/10/2012)
-
Does itunes work with windows 8.1
my itunes wont work since i updated to windows 8.1 is there something i need to do so that itunes will recongize my ipod
-
Resume from Screen Saver Issues
Hey All, Well...migrated from Leopard to Snow Leopard with minimal issues but In Leopard, after waking from screen saver, a box would prompt for a password. I've gotten SL to do this, but there is no way to switch user. I have multiple users and i'm
-
Getting Runtime Error on SAP CRM system TSV_ILLEGAL_REFERENCE
Runtime Errors TSV_ILLEGAL_REFERENCE Date and Time 07.03.2011 13:05:08 Short text The reference to an internal table is destroyed. What happened? Error in the ABAP Application Program The curre
-
Lightroom 4.1 will not import video from the Olympus OM-D EM-5
Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.