Premiere - weird playback issue with GPU accel on, doesn't do it with GPU accel off

Here's the sequence how it looks when paused:
Here's what it looks like as soon as I hit play:
I had changed the origins of each of the 4 video tracks to 0,0 and then positioned them, it almost appears like using CUDA it ignores the origins of the 4 tracks.... if I turn off GPU acceleration, plays fine.
Any ideas?

You need to ask in http://forums.adobe.com/community/premiere/content
When you go there (don't reply here) you need to add a LOT more information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Weird Playback Issue...

I have this weird playback issue with iTunes for Windows. I am using Vista and I think the cause of the problem is that I am using MacDrive to access my OS X partition. But anyways, on with the problem. So the problem is that when I play a song, the song will play for like 5 seconds and then it will just go the next song. This song will do the same thing, and so-on and so-forth. Then, during this time, my Mac formatted hard drive is unavailable while iTunes is running. In "My Computer" the drive is there, but when I try to open it, Explorer freezes. Then, when I exit iTunes, it doesn't really exit. It still shows up in the task manager and when I try to end the process, it just plain doesn't end. I have to restart my computer to gain full use of it again. After the restart I can access my Mac disks, but once I start iTunes and try to play a song, I get the same thing again. And in case thats not weird enough, I can play the MP3's in WMP fine, and they will also play in iTunes fine if I actually open them, rather than just select them from my library. If I go to file open and select a song on my Mac drive, it will play fine, but then once I try to play a song from my library, I get caught in that vicious cycle. Anyone else had this problem or anything? Thanks. Also, is there an alternative program to Mac Drive that will allow me to read HFS partitions?

Post more about your situation... what format is the video, and where are you storing the video files? i.e., on a disk other than your startup disk? The adobe install is likely not the problem... I run adobe software along side FCS on about 75 workstations, and don't see issues like you describe.
Wavy? not accurate? what are you talking about?
Jerry

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

[bug?] playback issues with QT browser plugin, any workarounds?

I've noticed a playback issue with media files using the quicktime plugin (currently v7.1.3) with Firefox 1.5.0.x and now Firefox 2.0 on Windows XP (SP2):
Description:
When I open a media file in a separate tab or window, audio playback cuts out when I switch focus away from the tab or window (i.e. when it runs in the background). When I put the tab/window in the foreground again, playing resumes.
Reproducible: Always
Steps to Reproduce:
1. Open an mp3 file with quicktime plugin in a new tab
2. Switch focus to some other tab or firefox window
Expected Results:
Audio playback should continue in the background.
Actual Results:
Audio playback cuts out and resumes once you click on the tab containing the plugin or if you hover over it with the cursor. The cutting and resuming out doesn't happen right away but after a short delay, suggesting that it might have something to do with thread prioritization.
The file is completely buffered by quicktime, this is not about connection speed or bandwidth issues.
Opening the link to the same file with right-click->Open Link in External Application works well.
Someone else has filed a bug report against Firefox about this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=339449
I wouldn't be surprised if this turns out not to be an issue with Gecko but with QuickTime.
Can other users confirm this on XP? Is this a known QuickTime bug? Are there fixes or workarounds?
Windows XP

Yeah I had that thought as well but no joy. It works for the player but it doesn't solve my plugin problem. It really seems to be something about prioritizing, the way the audio cuts in and out - notice how it takes a few fractions of a second before a process loses its CPU cycles when you click away from it? You can observe this with System Monitor on the Mac or Linux or process explorer on XP. That's how the audio is cutting out and back in. I still think it's probably a bug/'feature' either with Gecko, the Firefox browser engine, or with the QT plugin..

LEAD Codec for MotionJPEG-Premiere Elements Playback Issues

There are several reports online (here and elsewhere) recommending installing LEAD Codec for MotionJPEG-Premiere Elements Playback Issues. Most, if not all, of the feedback is that it works and is only $10 USA dollars.
Today I went in search of that codec at LEAD Technologies and could not find a $10 LEAD Codec.
http://www.leadtools.com/SDK/Multimedia/Multimedia-MCMP-MJPEG-codec.htm
Instead, I found a bunch of kits priced at way over $100.00.
From the chat service at that web site, I discovered that the LEAD codec is no longer sold separately. In order to get that codec, you would have to buy the Multimedia SDF Kit (priced $595.00).
Any workaround suggestions
OR
pay the $595.00 to get the LEAD Codec
OR
go the file conversion route for the MotionJPEG?
ATR

ATR,
Great news!
On the PrPro forum, it's been 100% for MainConcept, and 99% for Morgan. One user could not get the Morgan to work on his/her system, but that could well have been OE on that poster's part. Still, those are not bad odds, and the 'cost" of the Morgan is better...
Just glad that it worked for you.
Good luck,
Hunt

Bluetooth headphones playback issues with iOS 6

Has anyone been experiencing some playback issues with the latest iOS 6 and Bluetooth headphones?
A few weeks ago, I bought a pair of Sony's MDR-1RBT Bluetooth headphones and ever since I updated my iOS devices (4S & iPad 2), playback of tracks has been lagging for the first few seconds. Whenever I choose a song on my iPhone or iPad's player, I just can't hear its first 3~10 seconds. I've contacted Sony about this issue and they bluntly replied that it's Apple's issue, but when I contacted Apple, they referred me to their Bluetooth connectivity site. In other words, my problem still hasn't been solved.
Could anyone help me solve this frustrating issue?
Thanks.

https://us.en.kb.sony.com/app/answers/detail/a_id/37416/c/65,66/p/40940,41713,70 251/

Zen - AAC: Playback issue with long songs (± 15 min.)

Hi,
I made some tests with AAC Itunes plus files, and I've experiencing playback issue with long songs (when it's about 5 minutes or longer, like the second movement of Beethoven's third).
During?playback, there is random artifacts added, never at the same place.
I cleaned up my Zen 6 Gb and even formated it, and the problem still occurs. The latest firmware is installed.
Is this issue has already been reported?
Thanks.

The Zen does in fact support AAC playback, but it's tricky--I've been dealing with this issue for a while, and I think it's finally solved. First of all, when you say "skipping," do you mean that the track skips ahead further into the same track, or does it skip to the next song with an error message like "There was an error with the audio file"? My problem was with the latter. There are a few possible solutions:
. Delete the erroneous track from your Zen, then re-transfer; in my experience, this corrects the problem, although sometimes it takes a couple of tries.
2. Make sure your AAC file is in iTunes Plus format (you can choose it in the ripping options in iTunes).
3. If you haven't already done so, upgrade to Windows 7. This means upgrading to WMP2, which recognizes AAC files and can transfer them to your Zen. It also means you can download a version of Creative Centrale (from the Creative Support site) specifically for the Zen, which replaces the Zen Media Explorer and Creative Mediasource, and which seems to handle AAC transfers much better (so far, I haven't noticed any of the playback errors, but you never know!). By the way, WMP2 and Creative Centrale will also transfer album art easily to the Zen.
Hope this is helpful.

I am having issues with being kicked off the internet intermittently. ATT says its not an issue with their service. Does anyone have an idea?

I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?

Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price

Weird 4k playback issue with Open CL

So I am in premiere CC 2014 and just installed an AMD r9 280 3 gb card. When I hit play on my 4k timline 1/4 res my CPU goes to 100% with terrible playback like 3 fps. The GPU at this point is idle doing nothing at all. Then If I let it play for about 5- 10 seconds suddenly the gpu kicks out of idle to about 50 percent usage and my cpu usage drops to around 50 percent usage. When that happens I get perfect playback. So it looks to me that at the begging of play back the GPU is not helping but then kicking in later. I should also note that if I turn off open CL and just use the CPU I can playback 1/4 res perfectly smooth. Also the footage is on a raid so I am not trying to run this off a single drive. Any ideas what is going on? I was on a 550 ti earlier and did not have this issue with cuda. I just found this 280 open box for 179 so I figured I would give open CL a go and upgrade my gpu.
System specs
AMD FX 8350 4.0 ghz
32 Gb Ram
R9 280 3gb
win 7 64 bit
Premiere CC 2014
8.0.0
Edit: I also would like to add I am gonna test it in premier CC now to see if the issue is a 2014 bug.
Edit: Only happens in 2014. Interestingly enough CPU usage still goes to 100 percent in CC and the GPU does some work but playback is flawless.

Hi Jim,
Thnaks for your feedback.
Here is a link to download some footage : WeTransfer
But you know, I done some test this morning. If I put my footage on my SSD system or on my NAS with RAID 5, no trouble with playback.
But if I let my footage on my Raid 1 Media volume (mirroring), the problem still be here... I think it could be the disk speed... What do u think about that ?

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

Premiere Pro CS6 Issues with AJA and Black Magic

Has anyone had any issues outputting via AJA and Black Magic cards?
I have 3 Macs using Black Magic Intesnsity Pro HDMI cards and 1 Mac using an AJA IO Express. On all the machines, i get weird audio issues intermitantly. I press play, no audio comes out. I stop, press play again, no audio comes out but the PP VU meter is registering. I stop, and press play again, and i hear distortion coming from my speakers, i stop and play again, and everything is fine. These issues are consitantly happening, but not necisarily in that order. I also get out of sync audio, then stop and press play again, and its all good.
I fell as though i have narrowed it down to being between PP and the IO cards, because if i turn the cards off in PP, my audio is fine everytime.
I have the propper Premiere Pro drivers (for AJA) and all the latest firmware and drivers for black magic. I am playing Quicktime media, usually Apple Pro Res hq or 444. IO and data rate with same codecs works perfectly in FCP. I have also tried using media that is local as opposed to on our server.
Has anyone had issues with this? Is this a known bug with in PP? Will it ever get fixed???
Thanks.

I have expereinced this issue on my Mac Pro right before I switched to a PC.
Call AJA Support. They are there to help you!

Video playback issue with 3rd gen iPod Touch

Hi all,
I just recently discovered an issue with my iPod touch 3rd generation video playback. The issue just reared its head today and I have no idea what I could've done to cause it. It's a small issue but frustrating enough to cause a problem.
If I watch a video normally (by opening up the Videos section and picking it), it'll play through to the end, then start over again, then stop. This only happens if I choose videos randomly, and doesn't happen if I play videos in a playlist.
What could be the issue?

I'll second that. I've been having the same problem since the last software update

A weird installer issue with xcode

This is a new macbookpro i bought only a few weeks ago. I installed xcode on it, then removed it due to the fact that i needed to put some really huge hd video files, which needed all the hard disk space i could muster. After moving the videos from my mbp to my external hd, i tried to install xcode again. However, xcode's mpkg won't open, no matter how many times i open it with installer. Other mpkgs and pkgs work fine. What's the problem?

Hi rhonnywhoop, and welcome to the Dev Forum!
rhonnywhoop wrote:
I installed xcode on it, then removed it ... i tried to install xcode again.
There's no such thing as a weird issue with Xcode after an uninstall-install again cycle. Almost anything can go wrong and weird is the rule, not the exception. But yes, most of the strange problems show up after the installation (e.g., Xcode won't open, Xcode starts up but gcc always fails, Interface builder won't read nib files, etc., etc.). If I needed disk space for a video, I'd probably get another drive before I'd uninstall Xcode, but then I use Xcode all the time. Plus it's too late for that advice, so I'll try my best to point you in the right direction.
A few questions:
1) Was there any message when the mpkg failed to open? Please post any such message for us;
2) Did you install from the DVD that came with your MacBook, or did you download a dmg from the Mac or iPhone Dev Center? If you haven't tried downloading the latest Xcode version yet, that might be worth trying;
3) Did you uninstall from Terminal, using the command given in the Xcode doc (e.g. /Developer/"About Xcode Tools.pdf"? If not, how did you uninstall the prior Dev Tools?
4) Is any entry made in one of your logs at the time of the failure? E.g., open Console.app (in /Applications/Utilities) and look for the most recent entries in install.log and system.log. If you find anything like that, please post it for us;
5) Have you tried any additional cleanup besides the recommended uninstall (question 3, above)? Based on case histories in this and other forums, the most powerful trick is to rename /Developer (e.g. to /OldDev). Other tips will be found by searching on terms like "uninstall" or "clean" in this forum.
In general, we can assume that since your previous installation was successful, the game is to restore your system to its past condition. This may seem like a no-brainer, but it might help to rule out irrelevant conditions as you try one thing after another. In fact, some developers have cleaned up by re-installing the entire system (needless to say, be sure to try restarting your system before resorting to anything that drastic!). On the other hand, some developers have reported that installing a more recent version of the Dev Tools (if any), can clean up a problem when repeated installs of the same system fail.
I hope something above will lead you to a solution. Several other developers who regularly contribute to this forum know much more than I do about installation problems. For example, if etresoft joins this thread, be sure to follow his instructions completely and before any others.
\- Ray

Premiere Elements 7 issue with track 1

I just recently switched to premier elements 7. When I first switched it was fine, but now when I bring video into the timeline it always creates new Tracks and will not allow me to put it into Track 1. No idea why this is happening and it's not the end of the world, except when things are put in automatically they are put onto Track 1, and I can't even move my video from Track 2 to Track 1. My computer is Vista home premium. Any help would be appreciated!

Hmm. I see that this is a dual-format cam that will also record in MPEG2.
How are you getting this MPEG into your computer? Are you using Premiere Elements' Media Downloader to pull it off your hard drive?
Also, for this video you should be using the project preset for hard drive or DVD camcorders.
I'm not an expert on these dual-format camcorders, so there could be an issue with it using 5.1 audio, if it is for those MPEG. That could lead to the problems you're describing.

Is anyone having playback issues with PPro CC 7.0.1?

Using the same computer and working on the same project, we're experiencing playback that often hangs at cut points. We had no problem playing back on the previous version of CC. Happening on multiple machines in our production studio.

Processor 2.8 GHz Quad-Core Intel Xeon
Memory 20 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Software OS X 10.8.4
One effect is used on one clip (gaussian blur), everything is rendered, no third party hardware.
Various types of media. .MTS from a Canon C100, 5D Mark III and II, Nikon D700 and DV footage. But again, this all worked fine before the latest update on CC.
Now that I've watched the piece a few times through, it seems to have issues with the Canon C100 footage most explicitly.

Premiere - weird playback issue with GPU accel on, doesn't do it with GPU accel off

Similar Messages

Maybe you are looking for