Premiere will not import any of the recommended Caption formats

I have so far used qt.txt files to add open captions to my video projects.
I would like to work with captions within Premiere Pro and have watched Adobe's video on how to do it.
Recommended formats are .scc but several others are supposedly supported.
I have tried to import .scc files and various flavors of xml files and adobe caption files.
None of them are recognized as valid formats in my application.
Do I need a plugin that is not installed? Or enable something or another? or why would I not be able to import the files?
Thank you on beforehand.
Gus

ggaarde2 wrote:
By the way I am using CS6
That would be the problem. Closed Captioning support was completely overhauled in CC 7.0. Previously, support for captions was very limited. The workflow was simply to select a sequence in the Project panel, go to Sequence>Closed Captioning>Attach. You could then enable display of the captions in the Program Monitor, but you could not edit the caption content or control timing in any way.

Similar Messages

Lightroom 3 will not import any images

[I replied to another thread, but it doesn't seem to be coming up at the top of the post list when I update my information, so I'm reposting in the hopes that someone will notice and offer some helpful advice, as this is rapidly becoming infuriating.]
I'm running LR3 on Mac OS 10.6.4.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter and Lightroom 2. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 continues to import just fine.
Anyone have any suggestions?

OK, I _think_ I have the cause & cure.
Cause:
Canon says the software [firmware?] bundled with the Canon Rebel XT "is not fully compatible with the latest version of OSX." I can continue to automatically bring up iPhoto or use ImageCapture, in any case. Thanks, but I want LR3. Canon recommended that I set the controls in ImageCapture to specify opening LR3 when a camera is detected. I did, but it was doing this before, so I saw no difference. Also, I'm not sure it was doing it reliably, before or after this change.
This software incompatibility might explain why the Canon Rebel XT was not loading into LR3, but would not explain why it was not recognized by the Finder to add to the Devices list. The Canon wouldn't get added to the Devices list in OSX 10.4.11, either.
ImageCapture could easily see the images on the camera, and could copy them to a HD without difficulty. But it's not LR3, and nothing convinced the Finder to add the camera to the Devices.
Cure:
What I did find, eventually, as a method for persuading LR3 to import properly is this:
I set ImageCapture to open itself when it recognizes a camera.
I jack in the camera, and ImageCapture opens.
THEN I open LR3. It comes up with the present images in the library.
I _click_ on the Import button (lower left), OR use the keyboard command (cmd-shift-I). It opens the import display, _with_ the images from the camera.
I set the LR3 import settings as I want them - I Copy the files, change file names, presets, etc. as desired. (I make a habit not to erase the camera files, until all is said and done, and the camera is disconnected from the computer.)
I click the Import button, and it does!
SUCCESS!
If I have it open ImageCapture first, that seems to persuade LR3 that images are on the camera.
Sometimes iPhoto accomplishes the same end, but I'd rather not launch that - subsidiary issues.
I went through this sequence a number of times, starting from neither software open. I tried different sequences - LR3 then ImageCapture, camera first or last, etc. The above sequence worked reliably; the others' responses confused me.
Those of you with similar Canon uploading problems, see if this helps any. If you don't have ImageCapture, try it with iPhoto instead. Just open it first.
sandrift71, does this answer your original question & resolve the problem for you?
Message text clarified - edited by: Jay_Warner

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Aperture 3.2 will not import any older libraries.

Aperture 3.2 will not import any older libraries. Is there any way to get around this. I have 20 plus computers (students) running the older version and have upgraded mine just to see how good Lion is. Unfortunately, mine is where we gather all of the projects from the other computers so now we are stuck.
TIA

This does work but adds another step to the process.
Back in version 1 or 2 (before the "Add or Merge" dialog box) adding librarys was much easier. I could grab multiple libraries and drop them on Aperture and then leave for awhile and let them get imported. Now I can only do it one at a time because the dialog box often appears and delays everything. Is there anyway to default Aperture to ALWAYS ADD?

Lightroom 4.1 will not import video from the Olympus OM-D EM-5

Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.

Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
http://forums.adobe.com/message/4882852#4882852
SUGGESTION:
Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

Please help CS 4.2 will not import ANY video file

I've been working for days to get this fixed. Everything installs fine software wise and I am using a
Matrox RTX2 for capture/playback but Prem CS4.2 will not import any video file type.
My system is up to spec.
I've seen this problem discussed but none of the (many) suggested solutions have helped.
I've uninstalled and re-installed the OS and clean install multiple times and still I get "file format not supported" with EVERY file type.
Please help!
Brian

Brian,
Welcome to the forum.
When issues occur with Matrox cards, updating its drivers often fix things.
If you create a non-Matrox Project, can you then Import AV files?
Good luck,
Hunt

IMovie 11 will not play any of the projects I have created over the past several months. It will play iMovie events. Anyone else having this problem? Please help - Thanks

Movie 11 will not play any of the projects I have created over the past several months. It will play iMovie events. Anyone else having this problem? Please help - Thanks

Thanks for the suggestion...
I just got back from the Apple Store for the second visit with the Mac Genius to try to resolve the problem.
First visit we trashed the iMovie 11 application and reinstalled iMovie and ran a software update. Upon relaunching we were pleased that all projects and events ran perfectly from both the HD and the Drobo.
After lugging my 27" iMac back home and restarting it the same problem appeared. I returned to the Apple store for a second visit. This time I left the iMac at the store overnight. The apple service guys were able to duplicate the problem and wiped my hard drive. There appears to be a bug with iMovie 11 (not confirmed) and an elevated report was submitted to Apple engineers.
I am leaving my "old" projects and events on the external drive unless I need to import them. I am not going to restore from back up and will use a "clean" version of iMovie11. No guarantees the problem won't come back. This issue consumed a TON of my time.... hopefully Apple can fix iMove11.

Had to restore ipod now it will not sync any of the apps that we have downloaded

Ipod was locked with password daughter forgot, had to restore ipod, now ipod will not sync any of the apps that we downloaded from itunes. Anyone know why???

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.

HT4314 I have an IPhone an IPad1 and and IPod. The game center on the IPod will not show any of the games. Can anyone help with this?

I have an IPod touch 4.2 and the game center is not showing any of the games. My Ipad1 and IPhone are running from the same account and both work great. Any suggestions how I might solve this? Thank u

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

HT4623 My iphone 4 will not open any attachments. the software says it is up to date

My i phone 4 will not open any attachments

What are the attachements? The iPhone may not be capable of opening them.

Premiere Pro CS3 Will Not Import Any Files

I connected my Motorola DVR to my PC (Windows XP SP2) with HD content passing through a Firewire 1394 connection. I opened a new Premiere Pro CS3 (Master Collection) file and accidentally selected capture. The computer immediately went to blue screen. After rebooting I cannot import any files into new or old Premiere Pro projects. It appears I compromised the software when I accidentally hit the capture button. Encore works fine so I am assuming the problem is only with Premiere Pro. Is there any way of reinstalling only Premiere Pro from the CS3 Master Collection disc set without having to reinstall the entire suite of programs?

You may be better off installing the whole suite again.

Photoshop CC will not import any video files when I try Video Frame to Layers and New Video Layer from File

Specifically I'm trying to import a .MOV I made in Quicktime. The file opens up everywhere else so it's not an issue with the file being corrupted. The error message I get from CC is
"Could not complete command _____________ because the video file could not be opened."
As far as I know I didn't save the .MOV with any permissions, but then again I have very limitted understanding of Quicktime. Originally the file was a .GIF that I converted to an .MOV because I wanted to edit the GIF using the video timeline instead of the animation timeline.
Thanks for the help.
Also, as an aside since I know a lot of Adobe employees are on here, the animation timeline is pretty crummy, there should be a way that you can open a .GIF into the video timeline as a video layer.

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

I have just installed prem elements 9 onto a new PC and it will not open any of the old projects

When I try to open any of the previous projects or any video file it comes up with the error message that the file format is not supported or the codex missing,. the same file will open OK on the old PC. This probems occurs for all video formats.

Without more information I can't say for sure, but:
1) You'll need to ensure you have the latest version of Quicktime installed in order to work with the MTS files from your Canon. Then start a new project and set it up for Full AVCHD video. When you do this the program will automatically install the necessary codecs.
2) As for the AVI, it could be an MJPEG AVI, which is an iffy file to edit in Premiere Elements. Sometimes it works and sometimes it doesn't. Installing the software that came with the camera can help.

Compressor will not import any file. Anybody have an idea? It was working fine 2 weeks ago.

Compressor will not let me import any type of file. I can not export a sequence from Final Cut through Compressor either. Anyone else have this problem or have a soulution. It was working 2 weeks ago.

.. but my history window does not fuction.
It makes sense that past history is gone as it is blown out as part of the compressor repair process.
Or, do you mean Compressor does not keep track of current projects added to the que (aka history)?
x

Iphoto will not import any photos from my 3GS

Hi all, Until now, every time I connect my iphone to my imac (3 year old intel imac), the automatically photos and videos have been loaded and then asked if I want to save them into Iphoto 08.
But now this does not happen any more, it seems that Iphoto do not see my Iphone. Neither I can see the Iphone in the Finder program either.
I have also tried Preview and import from there but Finder can not see my Iphone either.
Any help are aprecciated.
Best regards
Tom

wjosten!!!!!!!!
Holy macaroni!!!
Now it is just OK, I just deleted 5 pics received from emails, and woila..
Thanks a lot, you saved the evening and the hole season for me,
this issue have occupied far too much of my thinking lately, wondering if the iphone had water ingress in the docking part and so on , actually I was afraid I had to send it for repair...
Thank you Sir! You are genious!!!!
How can I make this up to you, send me your adress and I will send you a bottle of red wine directly from Norway!
I love my Iphone. What a device.
Tom

Premiere will not import any of the recommended Caption formats

Similar Messages

Maybe you are looking for