Premiere will not play back audio in sequence

I am using Premiere CC to edit Pro Res 422 in a sequence using the ARRI Cinema 23.976 sequence preset. My rough cut sequence has lost all audio playback. I can play audio from the source, and in other sequences in the same project but this sequence specifically is not giving my ANY playback. In audio hardware, I have set output to built-in output and made sure that my system is set to the same thing as well. When I click into channel properties, right click>Modify Channel I see 4 audio tracks set to Source Channel 1, 2, 3, 4. All are set as "Ch.1" under Channel in track.

I do not think this is the case. At the very end of the timeline the audio starts playing on the last few clips. I am checking auto-saves as well and it seems like each one has a point where audio randomly cuts off.

Similar Messages

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

I downloaded an album from i tunes, but it will not play back correctly,
it starts a track and then stops randomly and jumps to the next track
and then does the same thing ad ainfinitum! What to do??

Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

Hi Def video is jumpy and will not play back smoothly in FCPX

I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference. I need help?

FYI...
There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
If this option doesn't show up, make sure to install those codecs I recommendad earlier...
ProApps QuickTime Codecs v1.0.1
http://support.apple.com/kb/DL1396

I have a album purchased on itunes downloaded to my iphone that will not play back, what can I do?

I have a album that was purchased from itunes downloaded on my iphone that will not play back, any suggestions?

You can replace the back glass or get a case. There are many iPhone repair centers... Google for one. You can also try the Apple store... I've heard they will replace the back for about $30.

Video will not play, yet audio does.

Like the header says, all of a sudden I go to work on a project I've never had trouble with and the video will not play; it is frozen wherever the cursor is. Yet the audio does play. I've tried clearing cache, clearing premiere cache, gone all over the internet to try and find an answer, of course India is closed right now, so no help there, not that they really give it anyway. So I'm asking if anyone might have experienced this one and figured it out despite Adobe. I'm on a PC with Windows 8 and terabytes and terabytes of storage; plenty of space left on disc, too. As I said; this has never been even a hint of a problem Just started up today. This even beats most Adobe "beta testing" problems they heap on us unsuspecting sheep. So I'm completely flummoxed. A prize to whoever knows what's up with this! It's a new one on me... Thanks in advance to whichever genius knows the answer! :-)
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

OK, I found the answer by myself and wish to share it with those having the same issue. It turns out that the saved workspace can corrupt allowing audio to play, while video remains frozen. The fix is to change the workspace. Go to WINDOW, after creating a new style workspace and save the new workspace. Problem fixed. Also, if there are already a number of other saved workspaces that involve video you can simply change to that one and it will be fixed. Delete the corrupt workspace. That's it! This was discovered through a simple process of elimination which proves that bugs really can surface anywhere for no intuitive reason. Hope this helps you!

I-DVD created DVD will not play back on i-Mac 27"

The i-DVD Tutorial says "When you have burned your DVD, you will have your own DVD that can be played in any DVD Player or any DVD-EQUIPPED COMPUTER"
Unfortunately I do not find this to be so, and I would like to know why, please. The DVD created is in UDF form. It plays back perfectly in my Liteon Player via the TV. It will play on my Windows PC via either WMP or Nero, BUT IT WILL NOT PLAY on my i-Mac, neither by Quick Time nor DVD Player. I get the message "not in a form recognised." Goodness! It was created on the i-Mac, via i-DVD !!
All my software is up-to-date of course.
Can anyone tell me WHY?

There are a variety of reasons why a burned DVD will not be recognized by a DVD player.
I'm interested to hear you say that you burned the disk with iDVD and yet the disk does not playback on the same computer that created the disk. If you put a standard purchased video DVD into the computer does it playback? If it does not then I would focus your attention on the Computer / DVD drive itself and not iDVD.
Things to try:
1.) Make sure the DVD disks you are using are compatible with your computer's optical drive. If you use a disk that is not supported by your computer's SuperDrive you may get inconsistent burn results. You can find out what types and speeds of disks your computer supports by going here and looking for the "SuperDrive" section under your model of computer: http://support.apple.com/specs/
2.) Older drives / players may not be able to read newer types of burnable media. Use DVD-R disks that list a lower speed. Burnable media comes with numbering on the original packaging that indicates the speed of the disk (Usually 1x,2x,3x, etc.). The lower the number the more compatible the disk will be with more DVD players.
3.) Try different brands of media. I personally try to stick with media made by companies with a long history of making recordable media.
4.) Lower the burn speed in iDVD:
iDVD > Preferences > Advanced > Preferred DVD Burning Speed
-- The lower the number you choose the more compatible the resulting disk will be with more DVD players. It will also increase the amount of time it takes to burn the disk.
Hope that helps

Internal speakers will not play, only audio choice is "digital out".

15 inch MacBook Pro. Internal speakers will not play. Output to headphone plug did work. Now I cannot insert headphones into socket, it seems to be too shallow. There is no red glow as mentioned in other posts. I had the red glow issue on an older MacBook and resolved it by inserting toothpick into socket and triggered switch. I have used command, option, r and p reset. Ideas?

That is what I thought as well. I am not able to check the same headphone jack I was using earlier today, but other 3.5 mil jacks dont fit. I will try again with the same one used earlier.
Would this also cause my internal speakers to not be recognized? I had a issue similar to this with my old macbook and was able to resolve it by flipping a switch in the output socket. Something to try? I would also assume that a bent contact or switch is not something an average joe could fix.
Thanks for your quick responses.
--David

IDVD burns disc but they will not play back on same computer

Prior to this latest update of iDVD, I had ZERO problems with burned iDVDs. Now I can create and burn a disc in iDVD 6.0.3 but my computer refuses to recognize it as a playable disc. I put it in the drive and it spins and spins and after around 10 mins a screen pops up and says that it is a blank. But when I play it on a standard DVD player, it works fine. I recently updated Quicktime to the latest version. Something is wrong. Ah, for the days when you could call Apple about anything and they had the highest rated tech support in the world, now it can be really tough to get an answer. Can anyone give me some thoughts? Thanks, Reed

I have the same problem. iDVD disks that I burn on my G5 will play on G4's, my PC, and all consumer DVD players that I have tried them in. But they will not play on my G5 that created them, and they never have. The disk just spins for a few seconds and then ejects. It never gets recognized and never mounts. There is no error message. I regularly distribute my DVD's to 20+ people, and the disks play on all of their players, though I don't know if anyone tried to play one of my DVD's in a G5.
I use DVD-R disks, and have tried burning at slower speeds (4x)from a disk image using Disk Utility, but the disk still won't play on my G5. On the other hand, my G5 will play iDVD disks that I have burned on a G4, and it will play commercial DVD disks.
I have seen posts from other users who have complained about this problem. I have never seen a fix or a suggested solution that worked. It would be great if you have seen something on this, or have some suggestions, that might lead to a resolution. Otherwise, I can live with it.

New image sequence will not play back in real time.

I built a image sequence of 300 stills (jpegs) and when I ask it to build it at 30fps I can't get quicktime to play it back at that speed. I can barely get the software to play back at .25fps. I just bought the software to assemble consecutive stills from my DSLR and after spending 2 hours on the phone with apple I found out they offer no support for windows users.Is there another software out there that anyone could recommend that edits together stills to form a movie. Any Help is appreciated.

Premiere is showing multiple drivers, including an old Creative ASIO driver... but I ran a cleaner last year to remove it (not sure why Premiere is still listing this??). I also have a Matrox MXO2 LE Max installed, which I believe installs an audio driver as well.
I'm not sure what you mean by "check with system default"? There is nothing in the Premiere audio hardware preferences that mentions a "default" of any kind.
Again, this makes absolutely no sense as I've not had any issues for years and worked on this last night... turn on computer today and suddenly it won't play audio in Premiere?!
Anyway, in my audio hardware preferences:
- I have always had Adobe Desktop Audio set to Premiere Pro WDM Sound. The dropdown list there gives me the options of: Premiere Pro WDM Sound, Xonar Essence ST ASIO 64 (my audio card), Creative ASIO, Matrox ASIO Driver for Premiere Pro.
- Map Output for has always been set to Adobe Desktop Audio (Matrox Player is my other choice).
- Even when selecting Premiere Pro WDM Sound, it always displays the Speakers below as "Speakers (ASUS Xonar Essence ST Audio Device)"
One further note (not sure if it helps)... as I said, Premiere is showing the audio levels, but if I look at the Windows desktop sound it doesn't show any levels (it normally does). And again... sound is working in every single other program I've tried... INCLUDING Adobe Audition (which has some of the same settings showing as Premiere does!).
So this is definitely an issue within Premiere... I just don't know what else to do. Thanks for assisting!
Greg

DVD Studio Pro not playing back audio of asset converted from FCP via compressor.

I exported project via compressor:
File Extension: m2v
Estimated file size: 4.34 GB
Video Encoder
    Format: M2V
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV
    Crop: None
    Frame rate: 29.97
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 3.6 (Mbps)
    2 Pass VBR enabled
        Maximum data rate: 7.5 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 15, Structure: IBBP
    DVD Studio Pro meta-data enabled
This took about 7.5 hours. I exported the audio separately as AC3. Finder plays it sound & pictures. Quicktime plays the video. DVD Studio Pro, when I drag the assets (video, audio) to the timeline editor, so I can play it in the viewer, it plays the audio the video is black. No setting in view or any other setting will get it to play the video. This project is due to ship today and I don't want to re import it if I don't have to.
I exported this project before the MPEG2 export as a Qicktime with .mov suffix. This plays alright, but there is artifacting around motion. I think this is due to low VBR, but don't know. Can ayone help?
Dix Moser
[email protected]
FCP Studio
PowerMac 1.8G 3G mem 250G HD
750 G ext. Firewire drive (where media is stored)

If I may chime in...
I'm a little confused on the "what plays what" part, but all that really matters is what DVDSP sees/plays.
I've worked on a system like yours and what I'd recommend is:
1. NEVER export via Compressor. It's just ungodly slow on anything less than a Quad. Export a self contained QuickTime Movie using the first export option and use that to feed Compressor.
2. Segment your output into manageable clips (I like 15-20 minutes) both to perfect the encoding and so you aren't re-encoding the whole show if something goes sour. It will all play fine as long as it's all in the same DVDSP timeline.
From what you describe, I'm thinking you're on an early version of Compressor that had A-Pack as the AC-3 encoder. This is no biggie, I mention it mostly to verify. Early Compressor was good too.
Make maybe a 5 minute piece to tune up. Just export as normal, then into Compressor. Your encoding values seem about right. Get the AV pair into DVDSP and it should play. I'm guessing that part of your problem is that the processor is fighting to handle the project size. Build the test clip project and look at it in DVD Player to view what would have been burned. If all looks OK, go for it. If not, bring back the results for discussion. This should be a snap, it's just a really big project. Keep your head up, I had a friend do a 225-minute disk on his G5...

Garage Band Not Playing Back Audio

Hi folks,
I've had an issue with GarageBand pop up. I've checked around, but have found no solution to this.
I've been working for the last two days on a song, opening and closing the app a fair bit depending on what's going on. About an hour ago, I decided to hit the option to play the track through the finder to save me opening if I want to listen over it.
After doing that and opening the app again since, audio is only playing back from two of the tracks. The sound level bars are moving in the rest, but nothing else is happening. I've checked the sound levels and all, but nothing is changing.
Has anyone else encountered this? Please tell me it's recoverable!
Many thanks.
Message was edited by: Malakym

You, my friend, are a savior. Thank you!
Not sure why that would have caused the issue as I've never hit that before, but hey, doesn't matter now.
Thanks!

Video will not play but audio does

I transfered some .mov files from my friends mac and tried playing it on my pc. It plays the audio but not the video on Quicktime. I tried using the VLC player and it says some thing about "icod." I tried many converters but they all failed.

Load one of the videos into QuickTime Player, open the Movie Inspector (from the Window menu), and post the information shown in the Format section. That will provide some important information for diagnosing the issue and suggesting what to do.
Regards.

I just downloaded the new firefox and now my worldwinner site will not play the audio because of a missing file?

It will not let me play the bejeweled 2 game with sound the new version of firefox disabled my sound?? Please help?????

Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
* FirefoxButton -> add-ons
** see [[Find and install add-ons to add features to Firefox]]
** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
* also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html

Premiere will not play back audio in sequence

Similar Messages

Maybe you are looking for