PREMIRE EL, 11. NEED HELP WITH DROPPING CLIP. SO FAR 3 1/2 HOURS. :(

i HAVE A LARGE VIDEO CLIP THAT IS IN VIDEO/AUDIO #2. I CAN NOT DRAG AND DROP IT INTO VIDEO/AUDIO #1 IN BETWEEN CLIPS. I HAVE TRIED EVERYTHING. PLEASE HELP ME. BARB

barbe1957
Without seeing your Timeline structure, I offer this thought for now. If you want to post a screenshot of the track situation, that would be helpful.
Why can you not drag and drop the large clip from Video/Audio 2 Video/Audio 1 - messes up the existing Timeline or just will not move or something else?
Select the group of clips that are now in the place where you want the Video/Audio 2 material to be. Then drag the selection as a group out of the way.
Drag in the Video/Audio 2 material to Video/Audio 1. Move the previously moved group back to wherever you want it.
What is the duration of this large Video/Audio 2 clip?
We will be watching for your follow up in the morning.
Thanks.
ATR
Add On...Typically as you hold down the Alt key of the computer main keyboard as you add a clip to an existing Timeline to avoid disturbing it.

Similar Messages

Need help with drop down list in parameters

Hi All,
I have the following data set:
DEPT1     DEPT2     DEPT3 DEPT4
Commissioner's Office     Finance     Accounting     Accounts Payable
Commissioner's Office     Finance     Accounting     Fiscal Analysis & Repo
Commissioner's Office     Finance     Accounting
Commissioner's Office     Planning,Asset Mgt     Asset Management     Inventory & Tracking
Commissioner's Office     Planning,Asset Mgt     Asset Management     Mobility & Congestion
Commissioner's Office     Planning,Asset Mgt     Asset Management     Roadway Safety
Commissioner's Office     Planning,Asset Mgt     Asset Management
Commissioner's Office     DesignProj Mgt & Tec     Bridge Dsgn Insp Hyd
In plus i have four parameters with searchlight options, the problem is when i select "Finance" from DEPT2 and in the next selection level i'm seeing all the departments "Accounting,Asset Management and Bridge Dsgn Insp Hyd" insted of just "Accounting". What i want is if i select a department in DEPT2, in the next drop down list(DEPT3) i want to see only the departement corresponding to the one i selected in dept2. Please need help.
Thanks

Hi
First of all you need to be using Discoverer 10g or 11g Plus not 9.0.4. Assuming you have the right version you need to present the parameters in the correct order. You can change the order on the parameters screen by selecting Tools | Parameters from the toolbar. You then use the Move Up and Move Down buttons to place them in the right order so that DEPT1 is offered first, followed by DEPT2, then DEPT3 and then DEPT4.
Next, you need to check the radion button on the bottom of the right-hand side that allows linking of parameters then you make DEPT2 dependent upon DEPT1, with DEPT3 dependent upon DEPT2 and so on.
While this works without hierarchies it works best when you have a hierarchy in place and even better when there is a composite index on the 4 items.
Best wishes
Michael

Flash Newbie needs help with Movie Clips/Action Scripting

Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
Caroline

Each layer has a blank keyframe before and after each
movieclip. Each movie clip is at a different frame. Even with the
blank keyframes added, the second video starts to play and then the
first video begins to play. Same happens if I click on the third
button. Third plays, and starts 1st and 2nd shortly thereafter. Is
there an action script I can put in that will tell the timeline
that, when a button is clicked, no matter where the movieclip is,
it will stop and start the newly selected movieclip?

I need help with drop down lists

I have a form that does not have lots of space and I want to use drop down lists to fill in specific information that describes site conditions. The problem I have is that the drop down list is only set up for a single line and that is not enough space for what I want in the drop down list. In other words, I have items that are several sentences. I have seen some descriptions of creating a drop down list that then fills in a text box that has multiple lines. Unfortunately, that is not an ideal solution for me. I just want the drop down list to select a single phrase. Here is an example of what I want to be able to select in the drop down.
The water heater spilled flue gases in excess of 5 minutes under worst case conditions. The combusiton testing was completed with in 30 days of the invoice submittal.
The form does not allow me to create a field that goes all the way across the page so it needs to look something like this:
The water heater spilled flue gases in excess of 5 minutes
under worst case conditions. The combusiton testing was
completed with in 30 days of the invoice submittal.
Any help is greatly appriciated.

Thanks for responding.
I have three items that are very similar in length and text for each drop down. There are 9 drop downs right now. I am using the drop downs to fill in a form that is used by several people and I want to keep things as simple as possible. Associated with the drop down already is a check box. When the check box is checked, it fills in a text box with a score (1 point, 5 points, etc). That score then tallys for a total with all the other scores in another text box. Using a drop box to fill in a text box is just getting to busy and than I have to distinguish each drop down item so it is clear which text you are selecting.

Need help with drop down menu

Hi guys,
I'm using div's for the main navigation of my site and want to create a drop down for the first two buttons. All the tutorials I have seen have been for using unordered lists but I need to use divs for this navigation set (long story!).
Can anyone help me get them set up please? Ideally I would like the drop downs to fade in but it's not essential. I take it I need to create an absolutely positioned div where I want my drop downs to appear, is that correct? - but then where do I go from there?
If you click here for my test site.
Thank you very much and I hope to hear from you.
SM

Hi Ken,
Thank you for the reply.
I had the main nav as an unordered list to begin with but for some reason I didn't find them as easily controllable as the div's i.e. setting widths and heights etc. as I wanted each button to have a set width, instead of just having text with padding. Originally I had the button divides set as border left and right strokes but for some reason they weren't adding up, I think because of the padding I had on them. I know you can set these with unordered lists but opted for divs in the end!
Hope that helps.
Thanks again,
SM

Need help with Drop Down Menu _ URGENT!!

Hello -
I'm new to Dreamweaver. I actually have an old version
(Dreamweaver MX 2004).
I'm updating a website for work and this needs to be done as
soon as possible so I'd appreciate if anyone can be so kind as to
shed light on ANYTHING. =/
This is what I need:
I need a drop down menu; when a selection is chosen, I need
information regarding that selection to appear on the bottom of the
page. (I am working off an Excel sheet - it has list of service
descriptions along w/ the unit price, frequency & other fields.
So If I chose "database hosting" off the drop down list,
information would be generated (ie. it's corresponding unit price,
frequencies, etc.)
I've attached an example of a code but I cannot use that code
(which has JavaScript) to tweak what I need exactly.
I am VERY new to this so if anybody can help be out I would
GREATLY appreciate it.
Thanks!!

>I buy all their stuff as it
> is excellent.
Double Ditto!
Walt
"Paul Gillard" <[email protected]> wrote in
message
news:gedcoi$d65$[email protected]..
> Hi
> To be honest, the very best thing you can do is to get
hold of a DW
> extension
> from
http://www.projectseven.com
and then you will be able to have a
> completely
> editable 'easy to implement' drop-down menu system! I
buy all their stuff
> as it
> is excellent.
>
> Cheers
> Paul
>

Need help with Drop down cells on IPAD Numbers

Hy everyone:
Im new in this forum and Im not god writing, so sorry for my english.
I have a question about using Drop down cells on Numbers in the IPAD version. In Numbers I normally can use drop down cell but some days ago i bought the IPAD and Iwork suit, and i import some numbers documents that I have done. When I tried to drop the menu of a cell I could not.
I would like to know is their is a way to see this type of menus on IPAD Numbers.
Thanks for the attention. And I will be grateful for your answers

I don't think drop down selection is supported in iPad numbers. If you would like to see this functionality added, peas make a suggestion at http://www.apple.com/feedback
Thanks
Jason

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Need help with a button

Hello,
I need help with a button. I created a button and set it up
so that when you click and hold it, the button becomes lighter in
color (I used Alpha). I want the button to stay this light color
after i release the click. Right now it goes back to the normal
color when I release the click. Can somone help we this?
Thanks!

rpofclt wrote:
> Hello,
>
> I need help with a button. I created a button and set it
up so that when you
> click and hold it, the button becomes lighter in color
(I used Alpha). I want
> the button to stay this light color after i release the
click. Right now it
> goes back to the normal color when I release the click.
Can somone help we
> this?
you can't use the button itself if you want to maintain the
DOWN state after
release as button automatically resets itself once the mouse
lives the HIT zone.
Use movie clip instead and on press simply send it to a frame
where there
is DOWN state like image.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Need help with a recordset

I need some help with a recordset that selects a series of
vehicle makes that then show models when a make is selected. The
problem is when I select the make it shows a list of models like it
should, some of the make lists have five models and some have ten
or more. What I need help with is how to limit the list to just the
models and not include the "null" values. This makes my drop down
list have large empty spaces at the end of the options listed. The
query is as follows:
SELECT *
FROM saa.vehicle_make
WHERE make = '#FORM.select_make#'
Question # 2:
What can I add to this recordset so that I can search on just
the make alone without the model included. The submit includes both
of the make and model lists so that makes it tough to break up.
Here is the recordset:
SELECT make
FROM saa.vehicle_make
ORDER BY make ASC
Thanks
Shane

Sorry I guess I wasn't being clear. The lists work fine with
the present recordsets but I was trying to clean them up just a
little. I am using a table in mysql instead of an array for ease of
maintenance due to the high number of makes and models I am working
with.
For question number one I was looking for sql that allows me
to only show the models in the table for each make no matter how
many are in the row. Currently when I use the existing recordset I
get a long list of blank spaces as it is returning the "null"
fields also. I would like it to just show the models and stop at
the first null field.
For the second question I wanted to be able to submit the
form with just the make listed if someone wanted to see all Hondas
lets say. Not I have to select the make also so it limits the
return.
Thanks for all of the input
Shane
Here is the code I am using for the two dependent select
boxes:
<p align="center">Vehicle Search by
Make/Model</p>

<cfif isDefined('form.select_make')>
<cfset page.select_make = form.select_make>
</cfif>
<cfoutput>
<form name="DropDown" method="post">

<cfquery name="get_make" datasource="saa">
SELECT make FROM saa.vehicle_make ORDER BY make ASC
</cfquery>


<p align="center">Model:<select name="select_make"
required="yes" onchange="this.form.submit()">
<option>Select Make</option>

<cfloop query="get_make">
<option value="#make#" <cfif
isDefined('form.select_make')><cfif form.select_make eq
"#make#">selected</cfif></cfif>>#make#</option>
</cfloop>
</select></p>

<cfif isDefined('form.select_make')>

<cfquery name="get_model" datasource="saa">
SELECT * FROM saa.vehicle_make WHERE make =
'#FORM.select_make#'
</cfquery>

</cfif>
</form>
</cfoutput>
<cfoutput>
<form action="buyerModelSearchresults.cfm"
method="POST">
<p align="center">Model: <select name="model"
required="yes">
<option>Select Model</option>

<cfloop query="get_model">
<option value="#model1#">#model1#</option>
<option value="#model2#">#model2#</option>
<option value="#model3#">#model3#</option>
<option value="#model4#">#model4#</option>
<option value="#model5#">#model5#</option>
<option value="#model6#">#model6#</option>
<option value="#model7#">#model7#</option>
<option value="#model8#">#model8#</option>
<option value="#model9#">#model9#</option>
<option value="#model10#">#model10#</option>
<option value="#model11#">#model11#</option>
<option value="#model12#">#model12#</option>
<option value="#model13#">#model13#</option>
<option value="#model14#">#model14#</option>
<option value="#model15#">#model15#</option>
<option value="#model16#">#model16#</option>
<option value="#model17#">#model17#</option>
<option value="#model18#">#model18#</option>
<option value="#model19#">#model19#</option>
<option value="#model20#">#model20#</option>
<option value="#model21#">#model21#</option>
<option value="#model22#">#model22#</option>
<option value="#model23#">#model23#</option>
<option value="#model24#">#model24#</option>
<option value="#model25#">#model25#</option>
</cfloop>
</select>
</p>
<p align="center">Search by Make/Model:</p>
<p align="center"><input type="submit" name="Submit"
value="Submit"></p>
</form>
</cfoutput>

Need Help With D&D Program

Hi, I'm not sure if I'm allowed to post questions on this forum but I can't find anywhere to talk to helpful people about programming.
I'm making a dnd interface for JComponents. So far I've made a simple program that has a Component that can be lifted from a container and braught to the glass pane then later moved to anywhere on the screen and dropped into the container below it. Here's where my problems come:
1) Rite now my 'Movable Component' is a JPanel which is just colored in. I want to either take a Graphic2d from a JComponent/Component and draw it on the JPanel or change the JPanel to the component I want to paint and disable the component.
The problem with getting the Graphics2d is that if the component isn't on the screen it doesn't make a graphic object. I tried messing with the ui delicate and overriding parental methods for paintComponent, repaint, and that repaintChildren(forget name) but I haven't had luck getting a good graphics object. I was thinking of, at the beginning of running the program, putting 1 of each component onto the screen for a second then removing it but I'd rather not. I'd also like to change the graphics dynamicly if someone stretches the component there dropping and what not.
The problem with disabling is that it changes some of the visual features of Components. I want to be able to update the Component myself to change how it looks and I don't want disabling to gray out components.
I mainly just dont want the components to do any of there normal fuctions. This is for a page builder, by the way.
Another problem I'm having is that mouseMotionListener is allowing me to select 2 components that are on top of one another when there edges are near each other. I don't know if theres a fix to this other than changing the Java Class.
My next problem is a drop layout manager, but I'm doing pretty good with that rite now. It'll problem just move components out of the way of the falling component.
One last thing I need help with is that I don't want the object that's being carried to go across the menu bar and certain areas. When I'm having the object being carried I have it braught up to the glass pane which allows it to move anywhere. Does anyone have any idea how I could prevent the component from being over the menu bars and other objects? I might have to make 1 panel is the movable area that can then be broken down into the 'component bank', 'building page' and whatever else I'm gonna need.
This is all just test code to get together for when I make the real program but I need to make sure it'll be possible without a lot of hacking of code.
Sorry for the length. Thanks for any help you can give.

The trick to making viewable components that have no behaviour, is to render them onto an image of some sort (eg a BufferedImage). You can then display the Image on a JLabel that can be dragged around the desktop.
Here is a piece of code that does the component rendering for you. This particular example uses a fixed component size, but you can modify that as you choose of course...public class JComponentImage
     private static GraphicsConfiguration gConfig;
     private static Dimension compSize = new Dimension(80, 22);
     private static Image image = null;
     public static Image getImage(Class objectClass)
          if (gConfig == null)
               GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
               GraphicsDevice gDevice = gEnv.getDefaultScreenDevice();
               gConfig = gDevice.getDefaultConfiguration();
          image = gConfig.createCompatibleImage(compSize.width, compSize.height);
          JComponent jc = (JComponent) ObjectFactory.instantiate(objectClass);
          jc.setSize(compSize);
          Graphics g = image.getGraphics();
          g.setColor(Color.LIGHT_GRAY);
          g.fillRect(0, 0, compSize.width, compSize.height);
          g.setColor(Color.BLACK);
          jc.paint(g);
          return image;
}And here is the class that makes the dragable JLabel using the class above...public class Dragable extends JLabel
     private static DragSource dragSource = DragSource.getDefaultDragSource();
     private static DragGestureListener dgl = new DragMoveGestureListener();
     private static TransferHandler th = new ObjectTransferHandler();
     private Class compClass;
     private Image image;
     Dragable(Class compClass)
          this.compClass = compClass;
          image = JComponentImage.getImage(compClass);
          setIcon(new ImageIcon(image));
          setTransferHandler(th);
          dragSource.createDefaultDragGestureRecognizer(this,
                                                      DnDConstants.ACTION_COPY,
                                                      dgl);
     public Class getCompClass()
          return compClass;
}Oh and here is ObjectFactory which simply instantiates Objects of a given class and sets their text to their classname (very crudely)...public class ObjectFactory
     public static Object instantiate(Class objectClass)
          Object o = null;
          try
               o = objectClass.newInstance();
          catch (Exception e)
               System.out.println("ObjectFactory#instantiate: " + e);
          String name = objectClass.getName();
          int lastDot = name.lastIndexOf('.');
          name = name.substring(lastDot + 1);
          if (o instanceof JLabel)
               ((JLabel)o).setText(name);
          if (o instanceof JButton)
               ((JButton)o).setText(name);
          if (o instanceof JTextComponent)
               ((JTextComponent)o).setText(name);
          return o;
}Two more classes required by this codepublic class ObjectTransferHandler extends TransferHandler {
     private static DataFlavor df;
      * Constructor for ObjectTransferHandler.
     public ObjectTransferHandler() {
          super();
          try {
               df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
          } catch (ClassNotFoundException e) {
               Debug.trace(e.toString());
     public Transferable createTransferable(JComponent jC) {
          Transferable t = null;
          try {
               t = new ObjectTransferable(((Dragable) jC).getCompClass());
          } catch (Exception e) {
               Debug.trace(e.toString());
          return t;
     public int getSourceActions(JComponent c) {
          return DnDConstants.ACTION_MOVE;
     public boolean canImport(JComponent comp, DataFlavor[] flavors) {
          if (!(comp instanceof Dragable) && flavors[0].equals(df))
               return true;
          return false;
     public boolean importData(JComponent comp, Transferable t) {
          JComponent c = null;
          try {
               c = (JComponent) t.getTransferData(df);
          } catch (Exception e) {
               Debug.trace(e.toString());
          comp.add(c);
          comp.validate();
          return true;
public class ObjectTransferable implements Transferable {
     private static DataFlavor df = null;
     private Class objectClass;
     ObjectTransferable(Class objectClass) {
          try {
               df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
          } catch (ClassNotFoundException e) {
               System.out.println("ObjectTransferable: " + e);
          this.objectClass = objectClass;
      * @see java.awt.datatransfer.Transferable#getTransferDataFlavors()
     public DataFlavor[] getTransferDataFlavors() {
          return new DataFlavor[] { df };
      * @see java.awt.datatransfer.Transferable#isDataFlavorSupported(DataFlavor)
     public boolean isDataFlavorSupported(DataFlavor testDF) {
          return testDF.equals(df);
      * @see java.awt.datatransfer.Transferable#getTransferData(DataFlavor)
     public Object getTransferData(DataFlavor arg0)
          throws UnsupportedFlavorException, IOException {
          return ObjectFactory.instantiate(objectClass);
}And of course the test class:public class DragAndDropTest extends JFrame
     JPanel leftPanel = new JPanel();
     JPanel rightPanel = new JPanel();
     Container contentPane = getContentPane();
     Dragable dragableJLabel;
     Dragable dragableJButton;
     Dragable dragableJTextField;
     Dragable dragableJTextArea;
      * Constructor DragAndDropTest.
      * @param title
     public DragAndDropTest(String title)
          super(title);
          dragableJLabel = new Dragable(JLabel.class);
          dragableJButton = new Dragable(JButton.class);
          dragableJTextField = new Dragable(JTextField.class);
          dragableJTextArea = new Dragable(JTextArea.class);
          leftPanel.setBorder(new EtchedBorder());
          BoxLayout boxLay = new BoxLayout(leftPanel, BoxLayout.Y_AXIS);
          leftPanel.setLayout(boxLay);
          leftPanel.add(dragableJLabel);
          leftPanel.add(dragableJButton);
          leftPanel.add(dragableJTextField);
          leftPanel.add(dragableJTextArea);
          rightPanel.setPreferredSize(new Dimension(500,500));
          rightPanel.setBorder(new EtchedBorder());
          rightPanel.setTransferHandler(new ObjectTransferHandler());
          contentPane.setLayout(new BorderLayout());
          contentPane.add(leftPanel, "West");
          contentPane.add(rightPanel, "Center");
     public static void main(String[] args)
          JFrame frame = new DragAndDropTest("Drag and Drop Test");
          frame.pack();
          frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          frame.setVisible(true);
}I wrote this code some time ago, so it won't be perfect but hopefully will give you some good ideas.
Regards,
Tim

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

PREMIRE EL, 11. NEED HELP WITH DROPPING CLIP. SO FAR 3 1/2 HOURS. :(

Similar Messages

Maybe you are looking for