Preorders, reservations and walkins, the numbers don't lie. All good!!!!

With all the worry and frustration I've been reading, i started thinking about the numbers behind the preorders and reservation. When you lay out the facts, it really sounds a whole lot better and you should feel comfortable after reading this.
Apple said they sold 600000 preorders, there are say 250 Apple stores worldwide according to the Apple site. Lets say each store was allotted 2500 reserved and 2500 walk ins ( high but just follow the logic), thats 5000 per store x 250 stores = 1250000. Thats a total of 1850000. Now all the reports I've read on the net were saying that apple was producing 3000000 per month. Just say they only were in production for 2 months which is unlikely, thats still 6 million phones available on launch day and we figured we only need 1.85 just to fulfill our preorders, reserved and walk In's.
This is why I feel comfortable knowing I have a phone on the 24th. I reserved mine for pickup @ my local Apple store because I have to work and will not be home to sign. I will try and go before work, but if i can't will be going after.

Depends on the production schedule, but I think they will get new shipments at least weekly if not sooner, so not bad i would say. The problem is the sell out rate. Tell you what i did with the iPad, any big city Apple store I called was sold out, so I looked for the smallest populated area and found one. I drove about 25 extra miles, but it was well worth it.
Good luck.

Similar Messages

  • Unable to Reserve and Approve the Scheduled Releases in 11.5.10.2 version

    Hi All,
    We are newly implementing the Planned PO’s for our client. Now we are successfully reserve and approve the Planned PO’s using the Position Hierarchy but when we try to reserve and the approve the scheduled releases using the same Position Hierarchy here the Approve button is frozen, but from Tools we are able to check the funds.
    EX: A, B, C are in the position Hierarchy
    1. A is forwarding the document to B
    2. B is able to open the Scheduled document from the Notifications but here when he try’s to reserve and approve the document here the Approve button is Frozen.
    Note: if B is approving the document from Notifications the document is sending to the next manager and he is able to approve the document but in action history for reserve it’s showing the ‘C’ name instead of ‘B’.
    Can any one help me on this issue ASAP?
    Regards,
    Kevin.
    Edited by: kevin329 on Jun 8, 2009 2:30 AM

    Hi,
    Performing your action plan by copying all the files from AU_TOP to my local machine and then try to open the INVIDITM.fmb but still the same problem.
    Is this the problem of forms version or some thing else?
    Because I am able to able the POXPOEPO.fmb( Purchase Order form ) in the same version and do the customization as per requirement.
    Could you please suggest any other alternative solution?
    Thanks
    Ashutosh Chowdhary

  • Bt hub 4 does the hub reserve and limit the amoun...

    quick question....when connecting multiple computers to the hub(1 wired,3 wireless),does the hub reserve and limit the amount of bandwidth to each computer??
    thanks 
    karl

    There is no bandwidth control, but Ethernet connections tend to get priority.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Am having problems emptying my trash. Takes forever and then the contents don't delete. What must i do?

    a) Am having problems emptying my trash.
    Takes forever and then the contents don't delete.
    What must i do? My trash box is full and it's affecting my operating system?
    b) Does the items in trash slow down my operating system?

    Abu,
    There may be something going on with your ownership if the Trash if the files aren't deleting. OK, let's try this:
    Launch Terminal (found in Applications>Utilities folder). At the $ prompt, type (or paste):
    ls -la
    and hit Return. In the right hand column, you should see .Trash listed and to the left, you will see the "owners" name (in my case, clintondyches). If the owners name shows as root then the following will fix the problem. At the same $ prompt enter
    sudo chown yourusername .Trash
    (replace yourusername with your actual user name - such as mine being clintondyches).
    At the prompt $ again, type or paste:
    ls -la
    If this was successful, you should see yourusername instead of root.
    You should be in business now. You should have ownership of .Trash and be able to empty your Trash, drag items to it and empty it, etc.
    Call back and let me know...
    Clinton

  • I updated my Iphone4 and had the m.calendar app with all of my daily temperatures saved, since the update after even after synching the iphone to itunes I have lost months of tracking I am devastated!! can anyone help get it back

    I updated my Iphone4 and had the m.calendar app with all of my daily temperatures saved, since the update after even after synching the iphone to itunes I have lost months of tracking I am devastated!! can anyone help get it back

    I don't understand this answer. What do you mean " your contacts should be in whatever program/service you have selected to sync."? The address book is created on the phone not in Itunes or any other program/service. When Itunes says backing up phone I have to assume it backs up everything on the phone. Most of what's on my phone does not come out of itunes. I download apps directly on the phone. When the software updates it does not bring those apps back. I have to go into the appstore and install them all over again. Itunes music library syncs with whatever is on the device your linked up to BUT the phone book just dissappears after you update the phone. There is no way to save it anywhere else.

  • How can I resize and reposition the Date Created window for All windows?

    When setting view options for a finder window set to list view, I cannot get column resizing or positioning to hold. When making those changes, the option for "All Windows" automatically shifts to "This window only" and it then does not hold.
    How can I resize and reposition the Date Created column for All WIndows?

    Hi Harmz,
    Try dragging this file to the Îesktop & reboot...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist

  • When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

    When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

    many thanks.
    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • How can I select an area of a picture (larger than one pixel) and find the average RGB values of all the pixels contained inside the area?

    I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/

    With the selection you could do a copy paste and use the histogram of the new layer set the histogram source to selected layer.  The eye dropper sample size may also to get the average  of a square area around a point.

  • HT4587 em.  Now they say an error has occured.  The network has timed out.  I have rebuilt it and reconfigured the units, done hard resets.  What can I do now?

    My 2 airport express units have worked until now.  I only play Itunes on them and have reconfigured them, done hard resets on the expresses and the extreme, built new networks and started all over.  when I can finally see them in airport utility and make sure they are connected to my network I still can't play them in itunes.  I can select them, but the error message is that the network connection timed out.  Used to work just fine.  Its gotta be a setting, but I can't figure it out.  I tried to change the channels, but it isn't very intuitive.  Airport Extreme is channel 11, one of the Airport Express' is channel 1, and the other is 50 something.  (I can't pull it up in airport utility, even though it shows green light and appears on my ipad. 

    Disable your firewall/security software, then try again.

  • Copy array and sort the numbers in the new array

    Hi!
    I have an array containing some digits where some of the digits are zeros. I want to copy the digits to another array but the zeros (well, I actually want to copy the zeros as well but I want to have them in the end of the new array).
    I suppose I need an if-statement that checks if the old array contains any zeros and in that if-statement copy the content to the new array and put the zeros in the end.
    This is my code so far and I don�t know how to go on from here:
    int[] new_array = new int[array.length];
              for (int i = 0; i < array.length; i++)
                   if (array[i] > 0)
                        new_array[i] = array;
                        new_array = array;
                   System.out.print(new_array[i] + " ");

    Roxxor wrote:
    I think I know how to do it but only if I can catch the digits bigger than zero.
    My code below just checks if there are positive digits and if there are, the whole old array is copied to the new one.Yes. Don't do that, you can see it's wrong.
    So my problem is that I don�t know how to catch the digits bigger than zero and copy them. Is there any built in java keyword that catches signs, number etc?
    if (array>=0)
         new_array[i] = array[i];
         new_array = array;
    Yes, there is such a keyword. And you are already using it correctly in your code. You are already testing if the array entry is bigger than zero. Your only problem is, you don't know what to do when it is. But now you've been given two hints about what to do.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • TS3367 When I answer my FaceTime for some reason the video shows up sideways.How do I fix this and turning the IPad don't fix it

    When I answered my FaceTime the video picture went sideways and half the size.Turning it does not help and the people on the other side say I show up in a very small box.How do I fix this?

    Understanding the Side Switch
    http://support.apple.com/kb/ht4085

  • I got trouble reading a line and breaking the numbers up

    Hi. I am trying to read a text file with sample data such as:
    1 435 345345 3 43535
    and so fourth. Basiclly is a line containing many numbers. How can i read them as individual integers? I can't find a source on the web that explain a method to solve this problem.. I used the bufferReader and the readline method but i am stuck on what to do next so i can read them as indivudal integers. Can anyone help me out please?
    Thank you.

    Once you've got a String with readLine, use String.split or a StringTokenizer to split the String into individual tokens.
    Then, call Integer.parseInt or Double.parseDouble on those tokens.

  • I have had a iPod touch 4 on iOS 5.0.1 32gb and whenever I plug my apple earbuds with remote and mic the  /- buttons don't work

    I don't know why but the remote volume buttons wont work on my iPod. When I got it it was on running on  4.3.4 an it worked perfect but no it wont. Please help

    Try the standard fixes to rule out a sftware problem:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If still a problem then an appointment at the Genius Bar of an Apple store is in order.

  • I have 2 apple ID one of the emails i used was hacked into a while back and now the password don't work to open that particular account in order for me to update my apps ? how do i get round this problem

    further to the outline in the description above - i cant play a dvd on my mac book it keeps spitting it out ?

    Maybe some help here:
    http://www.apple.com/support/appleid
    http://www.apple.com/support/mac/app-store
    https://iforgot.apple.com/password/verify/appleid
    http://support.apple.com/kb/HE57
    Sorry forgot the disk part.
    You may have a dirty lens on the optical reader, you can try a DVD/CD cleang disk (available at most places that sell DVD/CD players, some canned moisture free compressed air, or a buisness card wrapped in a micro fiber cloth to try to wipe the lens clean.
    Hope this helps

  • I upgraded to 4.o and added the fireFTP which I use all the time and it does not work. How can I get this to work?

    Upgraded to 4.0, added fire FTP and all of my settings carried over. Now it just sits there and tries to connect. It does not connect. What needs to be done?

    Hi vbaio, So far so good. Iran Malware antibytes and Spybot search and destroy after updating them both for the latest updates and so far not one of the pop ups .It is mid afternoon here in Australia and tonight will be the biggest test. I will advise you if it starts up again.Spybot actually I think who came up with the actual bug before I did the scans may have solved the problem.These programs are free here. Tweedle. Thanks again

Maybe you are looking for