PreP crashes when rendering preview on timeline

Hi,
I'm using CS3. PrePro crashes when I try to render a preview on the timeline. It was working fine, then a few days ago it started doing what I described. I was almost done with the project when this started happening. I'm still able to make an AVI of the sequences,...but of course that is not a solution. Any suggestions on how to fix?
Thanks for your help,
Mary

First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the 15 questions at the end of that link... for question #1 you may use the FREE http://www.headbands.com/gspot/

Similar Messages

Premiere Pro will crash when rendering part of timeline and cancelling - common issue?

There have been times where my timeline was red- so I chose part of the timeline, hit enter to render, and then realized it was going to take too long so I cancelled out. However, every single time (when I hit cancel, not "x"), it will tell me that Premiere Pro crashed and close the program. Can anyone replicate this? Is this a known issue? I didnt see it reported anywhere. It is not random. I can anticipate it happening every time I do that.

None at all. It's the strangest thing. There are times where I will start a render, not realizing how long it will take, change my mind, and try to cancel and it happens. I may just need to resort to reinstall the application if I can if no one else is experiencing the same issue.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

InDesign CC crash when launch preview

indesign cc crash when launch preview on FolioBuilder, what is the problem?

ID crash when lunched preview of buttom and action

Crashes when rendering /Realtek drivr problem

hi,
love 6.5 then 7 but Pro is driving me potty... My system keeps crashing when rendering and also - or maybe becaused of?! - I keep getting 'can't playback audio / audio inputs are deactivated / adobe default sound drivers are in half duplex mode'. Are these problems linked? I've built up a large project - if I reinstall Pro will I lose it? I know I can't open it in 7.0 - pity! All help appreciated thankyou.
Ps ram is not a problem. I'm on vista.

Try this:
Support:kb402308 Realtek HD Audio
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

AE CS4 crashes when rendering

Since the last update to version 9.0.3.8 dva 2.0.0.161039 crashes when rendering.

I have AE 9.0.3, using a windows Intel Core i7-2600 Processor (8M Cache, 3.40 GHz) 4GB RAM.
It a very simple project, with version 9.0.2 to and are already' succeeded in renderind and after the upgrade to 9.0.3 fails more to do, after a good start and fast after a while begins to slow down until total blockade.
Sorry but I do not speak English and it's difficult to explain. Do you understand Italian?

Why does pre pro cc crash when rendering?

Why does my pre pro cc crash when rendering? It has done this repeatedly

There can be a LOT of reasons. You'll need to start investigating and eliminating variables.
Start by turning GPU acceleration off if it's turned on, and go from there.

After effects crashes when rendering error: (-209)(512)

after effects crashes when rendering , can anyone help me??
after effects error: ..\..\OpenCv\src\video\optflowbm.cpp:103: error: (-209)
(512)
( 25 :: 241 )

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

After Effects crashes when rendering to H264

Hi,
On one of my computers, After Effects Crashes when rendering to H264. It always chrashes when doing the last frame of a clip. I think its when muxxing the m4a and the m4v together...
Does anyone have a solution? maybe there is some odd codec trash going on?
Thanks in advance!

10.Rick Gerard,
Nov 22, 2012 6:07 AM in reply to espedg
Report
In every version of AE that has been capable of exporting h.264 the quality has been significantly lower than exporting with an app that gives you the option of multi-pass rendering. This has always been true for MPEG codecs that use inter frame (temporal) compression. You just can't get the same quality without multi pass compression. This goes back to the first use of MPEG streams.
AE CS6 may have H.264 encoding broken internally, but any pro has never used AE to render highly compressed delivery codecs because AE was never designed to be the right tool for the job.

Speed Grade Crashes when rendering

SpeedGrade crashes on me when I try to render graded footage to an h.264 file. I have tried both mts footage from the canon xh-a1 that has been converted to quicktime as well as footage straight out of the 5D Mark 2. I can grade the footage, but every time I try to render the footage I get, 100% render completion and then SpeedGrade crashes. Also no file is ever created from the output. Very Frustrating. Any thoughts on what could be the problem.
Thanks

I have been using the English version and It crashes all the same.
Date: Tue, 29 May 2012 09:33:59 -0600
From: [email protected]
To: [email protected]
Subject: Speed Grade Crashes when rendering
    Re: Speed Grade Crashes when rendering
    created by Dennis Weinmann in SpeedGrade - View the full discussion
Thank you for sending the crash report. This is a known issue and only affects Italian builds. We have isolated this and working on a fix. Please stay tuned and use an English version of SpeedGrade in the meantime. Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4447743#4447743
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4447743#4447743. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in SpeedGrade by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

PremeierePro CC crash when rendering - not enough memory

I´m on working with a 90 minute project and when trying to render PP CC crash.
PremeierePro CC crash when rendering. It says not enough memory. I´m on a MacBookPro Retina:
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.1 (13B42)

Kevin said "Update the drivers for both your video cards" so it seems he knows more than I do about Mac's
Read below about some problems/fixes for dual cards
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Lightroom crashes when rendering Develop preview under Vista 64-bit

I'm running Windows Vista Ultimate 64-bit and Lightroom 1.1 crashes every time I click the "Develop" pane. My images are DNG files without the original RAW embedded.
Lightroom ONLY crashes when I load an image in Develop. If I open Develop without any image selected, it's fine (no image is displayed). I can zoom in to 100% in Library and it works fine. Exporting images to JPG works fine. Editing photos in the Library pane is fine. The crash data is:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 1.1.0.0
Application Timestamp: 4677e8e1
Fault Module Name: MFC80U.DLL
Fault Module Version: 8.0.50727.163
Fault Module Timestamp: 4484afec
Exception Code: c0000005
Exception Offset: 0002511c
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
I've uninstalled LR 1.1 and reinstalled and it does the same thing. When I uninstall LR 1.1 and the install LR 1.0 (the previous version) Develop does open, but it doesn't render the images correctly - it looks like it misinterprets the white balance by about 1,500k degrees (very ugly), but Library shows the correct image/white-balance.
I've updated my nVidia 7900 graphics drivers to the latest version, appropriate to my OS and architecture. I've disabled XMP creation and Adobe Photo Downloader, as well as all other running applications (Antivirus, spyware, itunes, etc).
This USED to work fine in Vista and I did not make any significant changes, but I expect it's an issue with WindowsUpdate causing an incompatibility. I can't roll-back to my Vista state when it worked a month ago (that's another Vista frustration).
Anyway advice or comments would be GREATLY appreciated since this is an integral part of my professional workflow. I own a legitimate, licensed copy of both Lightroom and Vista, yet neither company is willing to talk to me unless I pay them money, which I think is complete extortion, but I digress.
Thanks in advance for your help.

Has anyone got a resolution on this? I have the same issue. Lightroom crashes when I click develop and the develop module begins to render the image. Clicking develop with no image selected allows the develop module to load however selecting develop on the menu bar and choosing either previous photo or next photo causes lightroom to crash while rendering an image.
I have a 64 bit capable HP XW8400 workstation with 2 dual core Xeon processors, 4 GB RAM, and a nVidia FX 4400 graphics card. This video card was put in as a test. the original video card was an nVidia quadra NVS something. When I ran the NVS card I used the drivers certified for Adobe CS2. I am running 32 bit Windows XP SP2 with all current updates. I do not have any MS office components installed on this system.
I read of some troubles around the Realtek HD audio driver and some Adobe applications (not Lightroom). Since I have this sound device I disabled it and removed the drivers...still crashes.
I also disabled the Intel VT in the system bios (I believe this is required to run 64 bit XP or Vista)... no change. Also disabled the NX feature...no change.
I also loaded VMware workstation 6.0 and installed Lightroom in a 32bit Windows XP SP2 VM. In the VM Lightroom works perfectly on the same machine...just not as snappy...
This stinks...Lightroom works perfectly on my poky laptop.

Muse theme template onegenius.muse keeps crashing when entering Preview mode

I downloaded the Muse theme template onegenius.muse and it consistently crashes when put into preview mode. I have updated Adobe Air as well as the most up to date Muse version. Here's the interesting piece, now - This does not happen with any of the previous muse websites I have worked on. Just this template I downloaded from muse-themes.com. Here is the direct link to that template: http://www.muse-themes.com/products/onegenius What are my next steps? I have "saved as", relinked assets...everything I could think of! Any suggestions would be appreciated.

AE 2014.2 crash when switching preview panel with Matrox

I newly bought a pc with Matrox M9138 card, and using it for professional use. All works fine, except for Adobe After Effects CC 2014.2: it simply crashes when switching between the Preview-panel and Render-Cue panel.
When I look in AE preferences under Video-preview > Mercury transmit doesn't even show that there is a Matrox-card. The only option there is Adobe DV. So, I guess AE doesn't find and even makes use of my Matrox card.
Technical info:
Windows Version: 8.1
Processor: Intel Core i7-4790 CPU, 3.6 GHz
RAM: 16GB
Type: 64bits
Matrox M9138 LP PCIex16
Driver version 2.4.3.2 (4.4.3.2) for Win 8-64bit
Adobe CC After effects 2014.2
After Efects error: "Crash in progress. Last logged message was: <816><ae.blitpipe><2> Making New Context"
First I installed the Matrox driver, and then Adobe CC, but After effects crashed when switching between preview-panel and render-cue-panel (No Matrox recognition in AE preferences > Mercury transmit)
Now I did it in other order:
- I removed Adobe CC (AE included) and all parts
- Did extra checkup removal with Adobe CC cleaner
- Removed the Matrox driver
- Restarted PC
- Reinstalled Adobe CC with AE
- Reinstalled Matrox Driver
- Restarted PC
- matrox fully installed and working perfectly (no errors in Display Adapters info).
But still, After effects crashed (Still no Matrox recognition in AE preferences > Mercury transmit)
I contacted Matrox technical support, and as I suspected, they say they haven't had this problem before and all works fine.
Typical...
Does someone has an idea what the problem would be?
Help or info would be very appreciated.

Solution:
My graphics card did not supported the "Mercury Playback Engine GPU Acceleration (Open CL)". You can change it into "Mercury Playback Engine Software Only" in your Project Settings.
But this is in the wrong place in my opinion. Why not in "Edit/Preferences"? I could've changed it by myself but I did not find the menu.
Thanks Michaela from the Adobe Support Chat!

Crashes when building previews

LR keeps crashing when I try to rebuild previews. I had an issue before where I didn't see any thumbnails in the "all photographs" view, and to fix that I created a new catalog. I was able to rebuild previews for several external discs, but one disc kept crashing LR. So I installed that disc internally in my Mac Pro. Still kept crashing on build previews. Then I transferred all the files to a brand new hard drive, still inside my Mac. Whenver I rebuild the previews, the scan completes, and then I get the spinning beach ball, and then crash.
I do have a bunch of crash reports if that helps.
I'm running LR 2.7 on a Mac Pro with OSX 10.6.3. 5GB memory. I've repaired disk permissions on startup disk, and ran DiskWarrior on startup disk as well as the discs that house my photos. I've also run Techtool. In the past I've had issues with LR crashing when building Web galleries.
I would really appreciate suggestions--I've been wresting with this for days and it's very frustrating. Thanks!

More trouble: there's a catalog I can't import. I keep getting an "unkown error." And when I start the import, I'm getting strange previews with backwards text (I'm pretty sure it's instructing me to take hallucinogenic drugs) see below.

PreP crashes when rendering preview on timeline

Similar Messages

Maybe you are looking for