Prepairing Video for Display....

Does anyone know how to turn this feature off. Everytime I move anything on the sequence this dialog box appears saying "Prepairing Video for Display" and it seems to disable everything until it is done.
Number 1 how can I turn it off and 2 why does this happen.
Any info on this would be fantastic.
Thank you for the advice and help in advance.

Do you, by chance, have many long, complex sequences open?
I ask because the textbook reason for getting this message involves FCP's (default) behavior of loading all open sequences - and by that I mean all the 'renderable' information like motion effects, filters, multilayer compositing - into RAM in order to power the image displayed in your Canvas.
This may not be feasible if you need your Canvas window, but a quick workaround (especially if you're simply moving stuff around and not making creative decisions) is to turn Caps Lock on.
Or is this not an applicable scenario?

Similar Messages

Can anyone say what makes "preparing video for display" take more time?

i searched old threads. the topic has been raised before but there didn't seem to be any satisfying answer... i have noticed that when i have 3 or more active video tracks and i move a shot on the timeline, i get the "preparing video for display" message. it takes about 20 second to display, which is a long time to wait for every little adjustment i try to make... and i'm not using more than 5 tracks (which doesn't seem like that much either...)
i am using FCP 5.0.4. my whole project is 5mb and the sequence is 4 minutes long. got some effects but nothing major at this point. i'm worried it'll get much worse as i add effects and layers.
does anyone know what may be causing this or how can i make this process faster?
is it something that can be adjusted in the settings?
it doesn't seem normal. i've never seen anything like this in AVID...
thanks...

I'm at a loss at this point.
2 things...exactly what version of QT are you running? (may/may not make a difference)
Then, here are a couple of links for ways to trash preferences. Since you're on FCP 5.0.4, you should be good with the Anders Holck FCP Rescue 5.
Caveat...once you've trashed your preferences you'll need to reset them...might want to make notes of how they're set now.
If you use FCP Rescue 5, it will enable you to create a backup of your new prefs after they've been reset, then if you ever need to trash prefs again, you simply use the 'Restore' feature to get them back the way you want them quickly.
http://fcprescue.andersholck.com/
http://www.digitalrebellion.com/pref_man.htm
http://www.fcpbook.com/Misc1.html
Hope that helps,
K

Need help with rendering my files..."preparing video for display."

I don't know if I sent something to the trash folder from Final Cut, but for some reason all of my files in the timeline are unrendered, and every time I render them a message appears saying that it is "preparing video for display," and then they are unrendered again. What is this? Did I send something to the trash folder that keeps doing this? Is it a settings mode? Does it have to do with the space on my drives?

I'm having the same problems.
A friend of mine told me to trash the render files and re-render my whole project. He finds it some times gets rid of some of the glitches when you render along the way in steps.
I trashed the render files and of course the project says I need to re-render which I do. I can save the project, close it, and when it opens I get the "preparing video for display". Once that's done it has nothing rendered at all.
So I re-render, and its fine. I tab to another window and then back and it gives me the same message, completes and all my stuff is un-rendered.
So now I have a project that every time I render it can't save it or somehow it deletes the render files if I tab out of the program.

"Preparing video for display"

I've been working on a project for a month for a convention, and made 7 videos for it. Everything worked fine, as long as I was using ProRes footage.
The convention is done, and I'm trying to make a DVD of the proceedings. I've got an hour long timeline, and adding PPT slides that I converted to PNG on V2. Every time I slide a clip on V2, I get the "Preparing video for display" message, and I have to endure a 15 second wait.
So, I'm wondering if it's PNG, or whether it's simply that my project has gotten too big and unwieldy.

That's usually a sign that your graphics card is not keeping up.
How many sequences do you have open in FCP?
Are you displaying Audio Waveforms? Thumbnails?
What size are the PNGs?

"Preparing video for display" ****!! Project get's stuck before opening completely

I've been working in this project for almost two years. Now, I'm doing the subtitles in Final cut from Spanish to English for almost two months now, almost half way through the movie so I get a lot of renders done everyday. Since last Week my projects get stuck at "Preparing video for display". I usually go to the Autosave Vault, for some reason one of the project open, and I start working again from the hour or two of work I lost. But, whenever the projects get's to Autorender, the same message displays again, and the damned beachball appears and all goes to ****. I can't get anywork done, I've lost a lot of hours worth of work and I'm facing a deadline. I've tried trashing the preferences, but nothing. So before I drive my car into a tree i wanted to at least submit the question, to you.
Clues:
FCPR0 6.05
MACBOOK PRO WITH 4GB MEMOMRY
LION BUT RUNNING ON IT WITH SNOWLEOPARD ROSETTA.
Best to all of you.

My guts are saying that you've a bit of an unstable installation going on, causing the instability... the fix is to perform a clean install and try working with that. You can build a new startup disk on a firewire drive or on another internal drive or partition, leaving your current startup disk alone... safest way to test this hypothesis... I'd also not install Lion if you're going to run FCP 6. Best setup for FCP 6 is likely Leopard or Snow Leopard. In reality it can be argued that the version of FCP that you are running will run the best on the OS it was written for in the first place. Which, for FCP 6, is likely 10.5.x.
Here's a list of what is known to be a stable setup with every version of FCP: http://www.digitalrebellion.net/blog/posts/recommended_quicktime_and_mac_os_conf igurations_for_final_cut_pro.html
Jerry

Preparing video for display - forever

Everything has been working fine, but then I downloaded two plugins – Fx Factory and Sugar Fx MAgimoto. I have since deleted them, but no change in fcp.
Now when I try to open ANY fcp document all it says is "Reading Project... preparing video for display."
I have a 2.66 Ghz i7 with 4gb ram, FCP 7. Neither my files, nor my projects are big. What is going on?? Of course this would happen when I'm under deadline.
Thanks for any help you can offer.

In addition, try repairing permissions and trashing preferences.
Russ

'Preparing Video for Display' causing render problems

I have a DV-Pal sequence, with a few crops, burn effects and transition, so I've got a lock and render everything, but every time I do about 3 mins later a dialogue box pops up stating 'Preparing Video for Display' with a little percentage bar. Once it's 'Prepared Video for Display' (whatever that means??) all my rendered effects revert back to an unrendered state.
Has this happened to anyone else and how can I stop it?
Much Thanks, Matt

Quit Final Cut Pro. Go to your Render Files folder and trash the contents of the sub-folder there that has the same name as your project.
Next step:
Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. If you have further problems, the backup can be recalled and you can continue working.
Re-open your project and render again.

Preparing Video for display message

So starting within the last three days I have been having issues with a 'Preparing video for display' message/progress bar coming up whenever I move clips in a timeline, the same message that usually only comes up when a project is being loaded for the first time. This was never something I have had to deal with before, and each time it happens I have a three to five second delay for it to do whatever it is that it is doing. (It adds up.) Is this something that is supposed to happen or can I (please) make it stop somehow.
Thanks for the help.
.ryan.

Im running with 1 1/2 gigs RAM right now, cutting in FCP 5.0.4
There are usually between 2-5 layers of video in play, but never more than two at once (no overlays or mattes, just straight cuts right now.)
Maybe it is just the project is getting too large for the RAM i have, and I need to buy more. I was hoping to avoid this as I have spent pretty much everything I have, but if it saves me bursting a capillary, I'll do it.

FCP freezes at 'Preparing video for display'

Hi
I am experiencing a problem opening 2 of the fcp projects I've been working on in the last week. When opening everything seems to work fine, I see all the sequences opening, but when the 'preparing video for display' window appears it stays forever and I have to forcequit the application.
Opening FCP without existing projectfile works fine. Also opening different older projects. Just the 2 recent projects are experiencing this problem. I still worked on them yesterday night and didn't do anything strange after.
Also the Autosave Vault files are having the same problem.
I've been trying to delete preference files but nothing works.
Who can help me fixing this urgent problem. It would cost me days of work to redo the edit. And the frustrating thing is that I can already see them appearing but not touch them!
Thanks a lot
Aaike
FCP 7.0.2
OSX 10.5.8

Dear Luca, thanks for your answer. Just before you wrote, all of sudden, after trying many times, one of the projects opened.
I will see what happens in the next hours and write again when the same problem comes back.
Cheers
Aaike

Crashing during 'Preparing Video for Display'

I have an hour long, fully edited project that we have been cutting on a dual G4 with 6.0.4.
We now want to bring it over to our 8 core with 6.0.4 for color grading and motion, but every time we open the project it chrashes FCP during the open process when 'preparing video for display'
if we go open it back up on the G4 it is fine.
any thoughts?

Found the solution. It must be a PPC > Intel thing.
On the PPC, open the project and close all sequences except a blank one. SAVE.
Open on Intel, SAVE AS new project file, then reopen.
Should work now when you open up a sequence.

How to stop "Preparing Video for Display"

I've used FCP for countless projects but haven't ever tried to put hundreds of stills into the timeline for a final result that looks like what free software packages produce for consumer camera stills. I have a number of questions related to achieving this result, but I'll start with this.
The 'preparing for display' message comes up when I move chunks of pictures around. It freezes all activity until it's done (rendering?), and usually the action that led to it is a minor thing that still needs further manipulation. Would it help to reduce the resolution of the stills? How do I do that all at once? There are too many to treat individually.
Thanks for letting me know how to stop getting my process hijacked!
It is really slowing me down, and I'm on deadline.
With much appreciation,
Roxane

Still images are NOT video. FCP has to translate each image into a format that will play as video.
This process happens on the fly and as the numbers of images go up, the amount of time and system resources required to accomplish this also increase in a linear way.
There are a couple of things you can do at the system level.
1. make sure you have your RT playback set to Unlimited.
2. in System settings, increase your stills cache. By default it is around 10% of FCP's RAM. If you have 4GB or more in the machine, your RAM available to FCP should be set at 100% and you may want to bump up the stills cache to 50% (or more if the project is mostly stills). Do not raise it to 100% as you have to leave some free ram for the program.
Along with what Russ has suggested, you should get better performance. You need to be realistic though. FCP is a video editor, not a slideshow generater. If the work is a slideshow, there are better tools.
Have fun.
x

Can a Keynote presentation be made so it runs by itself when converted to YouTube video for display on a website?

I would like to have it run scripted to the music & narration so it flows like a slideshow/movie from start to finish, about 10 - 15 minutes by itself with no need for the viewer to do anything. I plan on making it a YouTube video and it will be on a page on my client's website. I am trying to hack Keynote into a multimedia authoring tool like Adobe Director which is another tool I am thinking of using. Is anyone else using Keynote for multimedia authoring rather than just speaker slide support (PowerPoint)?

in Keynote: Share > Send To > YouTube
Keynote is a very useful, basic level authoring application, it should not be compared to Director which is the industry leader in professional interactive authoring. You can learn the basics if Keynote in an hour, Director will take a few months.

When preparing video for Media Browser share it quits

I've been video taping class discussions on a Panasonic camcorder, and bringing them into Imovie. Most of the movies are around an hour+ and take up all but a bit of the dvd. Had no problems, and then I did one, where I inadvertently hadn't change the wide screen default to regular size, so redid it, and in the Share> media browser, it re processed it but when I made a few changes and set it up to reprocess to put on IDVD somewhere along the way it just popped the whole computer and went blank and shut off. FORTUNATELY, Mac came back up and program doesn't seem to be damaged, altho I wouldn't know if it was, it just continued to work.
So, I dumped that project and redid it, and it processed fine and I put it in IDVD and burned it.
I went on to do 5 more, editing, and now I'm at the point of Share>Media browse for IDVD processing of all of them, and the first one I did, it blanked out the IMac again. So I tried a 26 min one....and it did the same thing.
Has this happened to anyone else and what should I do? Should I refresh the IMovie in case it has a glitch in there now? thanks
PS I did notice that when it's working, on an hour IMovie, it will say "this will take about an hour...."
when it doesn't work it usually starts our with "this will take about 2 hours"
This is IMovie in the ILife 09 version

I fully understand that rendering isn't conducive, but this is the trade-off that you're experiencing.
When clips are moved or composited, FCP has to prepare that video for display in the Canvas. If you're working in Unlimited RT - as most of us are - then you're asking FCP to work harder at doing just that. And, unlike Motion, FCP doesn't use the GPU whole-hog, so it's easy to max that resource out quickly with large images.
The only real way to prevent this from happening when you're moving clips is to toggle Caps Lock on, disabling rendering. I don't think this is particular conducive to most workflows either (especially if you're compositing), but if all you need to do is resequence existing elements, it might work for you.
The other possibility is to use lower-resolution proxy images but that, like everything else, isn't really an answer...

Which MacBook Pros are safe to buy used and not recalled for video graphics/display failure (due to overheating)?

I've had some bad luck with MacBook Pros lately. I bought a 2010 model but it was effectively a Total Loss because of a vehicle accident. From searching with Google, people have reported logic board failures. Who knows if mine would've failed, too.
Then I bought an older 2009 MacBook Pro and that eventually failed due to the graphics chip failure. There was a recall on it but the problem occured JUST after the recall period expired. I don't have a microwave solder lying around or a proper setup to fix the problem myself.
Now, I im in the market for a used MacBook Pro, as a gift (I can't afford a new one right now) (with the luck I have, I'm basically done with them but the person wants one).
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures. I don't get it. I understand paying for the name, but the name also has to have reliability and you don't hear about video graphics failures from some of the more well known PC manufacturers..just saying.
I'd strongly prefer to not purchase any retina models, if at all possible. I want a mechanical SATA HDD and an optical drive. I oppose proprietary components -- as I understand it, the retina models make it nearly impossible to upgrade.
Which used MacBook Pros are safe for purchase? In other words, which ones do not have recalls or are susceptible to video graphics/display failures? I don't want to put the money down for one, only to hear it kicked the bucket and it needs service and is out of warranty.
Thank you for your time.

WindowsGreaterThanUnix wrote:
I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures.
I have an early 2011 MBP and have haad zero problems since it was new.

Recommendations for a C# video framework for displaying/transcoding/webcam capture

Basically what I need is:
Something that will let me write a C# program where a user can select a video input (typically a webcam or TV tuner card, but possibly a file), then the program will open the device, transcode to a certain format, spit out this data to a stream, which I
can read and either put into a file or send out over a socket or whatever.
At the moment I'm using VLC media player which has a feature that will play a video to a UDP endpoint (my program), which picks up the packets and sticks them together in a buffer. This is fine for the development phase but I can't use this for my final
product, also for displaying the stream I'm doing the same thing...VLC media player. (my program is a networking application which streams live video in case you're wondering).
So basically I need a replacement for VLC media player in the form of a library that can
1) Read from file/webcam/card and provide me with a transcoded stream
2) Decode this stream on the other end and display it and play the sound (should also be tolerable to some gaps in the stream)
I know this question has probably been asked a million times before but I'd like to hear people's recommendations

Hi Noel,
Could you help
provide a specific question? I think your issue is out of our support.
This forum is to discuss problems of C# code development.
By the way , if you have some voice about
C# video framework, please post your advice
here.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Prepairing Video for Display....

Similar Messages

Maybe you are looking for