Prepare-Move-Request - membership not updated

Hi,
At executing Prepare Move Request, I get problems with updating security group membership(2 security groups in the following screenshot). Updating distribution group membership is OK(1 distribution group in the following screenshot).
The distribution group and the security groups were previously manually created at target forest.
The question is:
Does "PrepareMoveRequest" update only distribution group membership?
Thanks in advance!

Hi Lynn-Li,
The problem remains the same.
The test mailbox account (source forest) is member of 3 security groups (1 universal, 1 global, 1 domain local) and 3 distribution groups (1 universal, 1 global, 1 domain local). The security groups were manually created at target forest with same
name,type and scope. At target forest the distribution groups are universal.
In the following screenshot the membership of distribution groups are updated, but the mermbership of security groups are not updated.
The questions are:
Is the above problem with security groups membership the normal behavior with Prepare-MoveRequest script?
Thanks in advance!

Similar Messages

  • GR quantity for movement type 101 not updated in PCA

    Hi,
    Does anyone have an idea why quantity is not updated in GLPCA-MSL for 101 movement type?. It has updated in FI (BSEG-MENGE) but not in PCA (GLPCA-MSL).
    Appreciate prompt response.
    Thanks,
    Rashmi

    Hi
       With note 834458 a statement for activity RMWE was introduced but removed again with note 962731 as this caused double quantities in PCA. Please read these 2 notes and check the coding in your system.
    regards
    Waman

  • Process inst cat cons_1 documented goods movement in cor3 not updated

    Dear Gurus, i have sent the cons_1 process inst cat to pi sheet and then send the related process message using co54. in order withdrawn qty is updated, but documented goods movement is not updated. please advise what should be done in order to update the documented goods movement in cor3?

    Hi,
    Check in CO54 whether all your messages are successfully sent or not . Ensure there are no errors as shown below..Check and revert...
    Thanks
    Kumar

  • OU based Device Collection Membership not updated frequently

    Hi,
    I have create  one OU based device Collection and  checked Used incremental updates for this collection  under Membership rules but whenever any Computer object moved form this OU to another OU than such Device is not removed
    from same OU based Device Collection... the Collection membership change is not happening properly even after i did update membership of that OU based device collection..
    My requirement is whenever any Computer object added or removed in/from any OU in AD than  the membership of corresponding OU based device collection should up updated within 5-10 minutes  how i can do this .
    To achieve this I done below configuration but its membership of the collection not updated... please guide..
    Shailendra Dev

    To add to Jorgen, note, there is going to be more to it than just AD discovery.
    What exactly does your query look like?
    Exactly how often is both your Hardware inventory and Heartbeat discovery set to? Do you have SW inventory enabled?
    Just to get thing out there IMO the requirement updated within 5-10 minutes is nuts.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • AD Group membership not updating in Sharepoint Foundation when adding Active Directory group to Sharepoint group

    I have Sharepoint Foundation installed with the latest CU updates.  It is running on a VMware box (Windows Server 2008 R2 Standard) with its backend on a SQL Server 2008 R2 vmware box.  The farm account is a domain user and has been given all appropriate
    replication rights, etc to active directory.
    Everything seems to be working fine except for security integrated with AD groups.  When I go to edit permissions I can add individual AD users just fine and remove them just fine and their access is taken away right away or given to them right away.
     I can also find AD groups in the people picker and add them to the site. When I add new groups to AD, they are found immediately within Sharepoint, and when I delete groups from AD, they are taken out of the people picker right away.  Now comes
    the weird part.  When I add an AD group to the site, all users currently within that AD group are given access to the Sharepoint Site.  This works for the first time only.  Now when I add or remove users from the AD groups, it does not update
    in SharePoint.  For example, I have an AD testuser1 in the AD Group "All Users".  testuser1 does not have access to SharePoint.  So I add  the AD group to the Sharepoint group "Visitors".  testuser1 now has read access to the sharepoint
    site.  Now, I remove testuser1 from the AD group, but testuser 1 still has access to the site even though he is not part of the AD group, nor does he have any individual permissions to the site.  Now, I add testuser2 to the ad group.  testuser2
    does not have access to the site, even though he is part of the ad group.
    It seems that the only time AD group security is working for me is when I first initially add the AD group to the site.  From then on, it's like sharepoint is caching the members of the group and not updating any new adds or deletes from the groups.
     Any ideas?  I am lost on where to go from here as I have tried everything from clearing cache files, rebooting servers, iisresets....

    I think I have at least cornered the problem, but am not 100% sure yet that it is the correct answer.  I think it could be 1 of the following 2 scenarios.
    Scenario 1:  We have 3 web applications setup on our web server ports 80 - Our sharepoint Web app, 2020 - Our My Site Web App, 2040 - Our Search Web app.  We are using host headers (http://sharepoint.***.com) instead of a server name.  So
    we setup our access mappings (Central Admin -> Application Management -> Configure Alternate access mappings) to use the host header (http://sharepoint.***.com) as the default mapping and the server name as the intranet access mapping.  By
    setting the default access mapping to host headers, i noticed that Sharepoint automatically assumes that all web apps are on port 80.  You can see this by going to (Central Admin -> Manage Web Applications).  The port listed all 3 web apps on
    port 80.  So I think when I was doing a profile sync and using mysites, it was messing with my AD security because of this.  What I did was the following.  I went to Central Admin -> Manage Service Applications -> [Name of your user profile
    service] -> Setup my sites.  I made sure that my preferred search center had the correct port number on it (mine originally had no port number), that my my site host had a port (again no port number originally), as well as the personal site location.
     I then saved this.
    Scenario 2:  Our user profile sync had 2 BDC connections that were corrupt and throwing errors.  I rebuilt the connections, remapped them to the proper user profile property.
    I did both of these scenarios above around the same time.  I then restarted all my servers, and at last the AD Group security is now functioning appropriately.  I have done multiple IIS resets and server restarts.  The issue has only reappeared
    once.  After restarting the machine again, we were back to the AD groups functioning correctly.  Because we had the issue reappear once after doing the above, I still do not feel 100% sure that either one of the above corrected the issue completely.
    As long as we are up and running currently, I am moving on to other tasks with this project.  My only concern that it will break again and I will have to revisit it is when we restart the servers....which is never fun.  I will update as I find
    a "true" answer to this issue....  Let me know if any of the above helped you or if you find something I may not have thought of.

  • Catalog group membership not updating

    Hi,
    I am experiencing a problem with my catalog groups. I have just created a new catalog group and added a user account as a member and also removed that user account from another group by logging in as administrator in answers and using settings - manage presentation catalog groups and users.
    If i now log in as that user the membership hasn't updated and when I click on My Account for that user it still shows as a member of the old group and not the new one.
    My security for users is done through LDAP and in Tools - Options in Admin console on the repository tab I have the LDAP Cache refresh interval set to 1 minutes.
    I know if I restart the presentation services that it will work ok but I don't want to have to do that as I have users using the system.
    Any advice would be appreciated.
    Thanks
    Patricia

    hi,
    you can try to set in the instanceconfig.xml
    the tags
    --->
    <CacheMaxExpireMinutes>2</CacheMaxExpireMinutes>
    <CacheMinExpireMinutes>1</CacheMinExpireMinutes>
    <CacheMinUserExpireMinutes>1</CacheMinUserExpireMinutes>
    <ClientSessionExpireMinutes>10</ClientSessionExpireMinutes>
    <SearchIDExpireMinutes>9</SearchIDExpireMinutes>
    <---
    they control the cache of the browser
    check administrator guide for more informations
    --check in other pc or check with an other browser at the same
    i hope i helped....
    http://greekoraclebi.blogspot.com/
    Edited by: eejimkos on Jul 15, 2009 4:52 AM
    Edited by: eejimkos on Jul 15, 2009 5:01 AM

  • Prepare Move Request Overrides target user data overwritelocalobject

    Hi all, I'm migrating from Exchange 2010 email between two different forests.
    The two forests are Windows Server 2008 R2.
    The two forests have the same users, and these are in production.
    In migration, I need to migrate all mail alias forest users and permissions origin shared calendars.
    When I run Prepare-MoveRequest.ps1, and put-overwritelocalobject, I target the user overwrites user data.
    I overwrite data as zip code, description ...
    If I do not put overwritelocalobject, I migrated user aliases.
    How I can migrate mailboxes and aliases calendars permissions without overwriting other user data target?
    regards
    Microsoft Certified IT Professional Server Administrator

    have you figured this out yet?
    as I am doing a similar task,
    however as of the lates CU fro 2013, I am using the prepare-moverequest.ps1 from, it states that you have to use
    -uselocalobject & -overwritelocalobject.
    however it returns everything fine, but when I go into AD I do not see any MSExch things set for this user, they are all blank.
    I migrated users with ADMT first, then ran the prepare.
    If I delete the user from the new environment, & then re-create them with prepare, then run ADMT all works fine.
    the issue I have is with the users I did ADMT first, when I try a move I get either a legacyDN error or a ObjectGUid error......
    would be nice if M$ could get their stuff together & get things working correctly.

  • LT movie viewer does not update from consecutive renders

    Working on a project I created an intro with LT using some of the Live Fonts. I did a "Render Movie..." to see the results. Noticed I had a spelling error so I went back and changed the typo, saved, and then did "Render Movie.." again. When it displayed the results the original movie with the typo played back.
    Suspecting some type of cache issue, I opened up Quicktime and selected the rendered movie and sure enough, the change had actually been made correctly, it is just that the viewer in Live Type, I suspect, is not picking up the change and playing a cached version of the first edit.
    Is there something I'm missing in a preferences setup or is this yet another "Feature" of which us users would call a bug?

    - The iPad 1 can only go to iOS 5.1.1
    For video problem try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Group membership on AD-bound server is not updating correctly

    I have a 10.6.4 server that is bound to AD with Win2008 domain controllers. I am seeing group membership not update properly on this OS X server. If I type "id -p username" I don't get a full list of groups the user is a member of. If I launch Workgroup Manager, all of the groups are listed. I am using the box as a Subversion server and need the group updates to propagate from AD for Apache authentication to work correctly. Any ideas as to why the propagation is not happening? Is there a way I can flush whatever cache might be causing an issue? Can the group membership list be "refreshed"?

    Yes, we are using Initialization Blocks to update the User Groups. Our USER_PERMISSION table has Login, Company_ID, Roles, etc columns in it. The Initialization Block will query on this Table and the query has a where clause in it and the Where clause "where company_id=(select substr(':USER', 0, (instr(':USER', '.')) - 1) from dual) and upper(login)=upper((select substr(':USER', (instr(':USER', '.')) + 1) from dual))) and dw_delete_date is null" from which it will get the roles for each user. And YES, the Caching is turned off for this initialization block.
    And I should try deleting the user folders, but my company has a very strict policy so I should do that in DEv, then QA and in PRD. Hope this works, but I am still not convinced why this is happening. We cannot keep on deleting the user folders in future if this happens again.

  • Goods movement document not updating

    Hi Gurus,
    I have created the order with component and external services did the goods issues and service acceptance but while checking in Menu bar of order>Extras>Document for order---->Goods movements no movement document is updared.Pls guide  me why the movement document is not updating,I am sure about the goods issue and service acceptance because Actual cost is coming..
    Thanks,
    Kumar

    Hi,
    For better chances of response, better to post this in MM forum of R/3.
    Thanks - Pawan

  • Problem clearing a move request

    Hi,
    I've got a simple Exchange 2010 setup running along a 2007 insallations.
    I have 2 DC's both running 2008 but not R2.
    My issue is, I have moved a couple of users using the local move request. One of them I delete the move request as soon as it had been completed (the icon changed back to the one without the little green arrow), but the other gives me an error message of
    Microsoft Exchange Error
    Action 'Clear Move Request' could not be performed on object 'Enid Dalton'.
    A User
    Failed
    Error:
    Couldn't find a move request that corresponds to the specified identity 'home.local/Top Level/2nd Level A/A User.
    The user exists and has not been moved within the OU structure.
    In a real world situation, this would then stop me from moving the user again. Obviously this doesn't happen every day, but a user could move offices for a short period of time and wish to move the mailbox to a local server.
    Any idea's ?
    Thanks in advance
    Phil
    Remember : Experience is something you don't get until just after you need it.

    When migrating from 2007 or 2010 to 2013 Exchange, if the account was deleted before the move request was cleared, or it was put into a different OU, you can force clear the move request as follows:
    Get-MailboxDatabase|%{Get-MoveRequestStatistics-MoveRequestQueue
    $_.Name}
    |SortPercentComplete|MailboxIdentity,ExchangeGuid,RequestQueue,StatusDetail
    Remove-MoveRequest-MailboxGuid
    $MbxGuid-MoveRequestQueue
    $MoveReQ-Verbose

  • PSA still not updated to target!

    Hi All,
      I see some weird thing in PSA. I dont know why all PSA's since last June..still says not updated to TARGET which is still in RED request.
    Whereas I can see my PSA request with RED MARK...although my data is updated in TARGET..
    Anyone has an idea why??

    Hi,
    If load to data target is successful, then PSA load Status will be turned as green (tick mark) for column request updated. In some cases, if request is not updated to data target or any error in loading to data target. Then request updated column will be displayed with red exclamation mark.
    Please reconcile your data target against PSA level periodic loads.
    Thanks,
    Manikandan Dhanakoti
    Edited by: Manikandan D on Jan 17, 2012 10:44 AM

  • Not updating GR reversal

    Dear Experts,
    I have made a PO against sales order. Goods movement and Confirmations have been done (partial).
    When I go to Documented goods movement, the total GR value is showing 16 Tonnes which is actual (after considering the 101 and 102 movements), but in the production order general data tab, the delivered quantity is 21 tonnes.
    The GR is reversed against the production order.
    Why the goods movement quantities are not updating in the production order?
    There is no record in COGI and CO1P also.
    Pls guide me what could be the mistake and how to address this issue.
    Regards,
    Rohit Chauhan.
    Edited by: Rohit Chauhan on Feb 9, 2009 6:50 AM

    Hi,
    The GR is done Manually using T Code MB31. The reversals are done through MB31 only. In OPKA, 102 movement is included.
    All the corresponding documents are in the system for goods movement. But still the quantity is not getting updated in production order.
    I ran the same scenario in sandbox, the quantity is getting updated in PO. Even when I am not cancelling the confirmation and doing the GR reversal using MB31.
    What can be the problem? What else should I check.
    Regards,
    Rohit.

  • The request has not yet been updated into the data targets.

    Request successfully loaded into PSA - start further update
    Diagnosis
    The request has as data target "only PSA". It arrived there successfully.
    System Response
    The request has not yet been updated into the data targets.
    Procedure
    You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
    I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
    Thanks & Regards,
    Praveen Yagnamurthy.

    Hi Praveen,
    Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
    Hope it helps!
    Regards,
    Pavan

  • Can not update request in data target

    Hi,
    We have a process chain for master data (10 parallel) loads.  One of the load
    failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
    When I checked the InfoPackage
    (a) update: full load
    (b) it has data selection
    (c) processing :PSA and then to data targets
    (d) Data targets: update in all data targets for which active rules exist.
    But I do not see any list of data targets here.
    Can some one please suggest me how do I correct this load failure.
    Thanks

    Hi Wondewossen, NS and Nagesh,
    Thanks for the information. I am in support, and the developer is
    not here now.
    I have checked Header tab in the monitor, in this there
    is a update symbol and infosource name and an -->
    but after arrow there is nothing.
    when I click on this I get a message
    "No active update rules exist".
    Can you please advice me how to I correct this.
    Thanks

Maybe you are looking for