Prepare new test from Production
How to Clone JDEdwards Enterprise One from Production to Test. Which document to follow. Please advice as this is very urgent.
Thanks.
I see you posted in both sections in the JD Edwards World category. Again, there is a separate forum for JD Edwards Enterprise One. If you go back to Forum Home and scroll down below the JD Edwards World category, you will find the JD Edwards Enterprise One category. That would be the better place to post this question (technically there is a good amount of difference between World and Enterprise One).
John Dickey
Similar Messages
-
Use Grid to Refresh test from production or Using Grid for Cloning
Is there a specific area of grid OEM specifically for database refreshing or cloning? We are about to do refresh of test from production and this has been brought up. We usu ally do either the copy datafiles+create control file or exp(dp)/imp(dp)
Is there an OEM click-click-click way to do this?
Thanks
MNYes you can create clone of Database from Production to Test using OEM.
regards
Pravin -
I want to setup a test database from production rman copy. I have an rman level 0 backup with no catalog. I looked at the duplicate rman command, but that requires to have a dblink to the prod system. I dont' have that and can't.
Given that I do I create a test database with a different db name from the production rman level 0 copy?
Please suggest.Thanks but the doc has the following assumptions.
1. db name is same on the restored host.(But I want to have db name test and should be the copy of db prod)
How do I restore to a different name than the source db name and also without the db link connection?
Thanks for your help. -
Database restore to test from production
Hi,
I am having 500+ GB database running in AIX with ASM. creating disk backups using rman and moving to Test server.. i like to know the commands for restore and recovery from disk to ASM in test server:
Prod server : ASM on AIX single instance
rman database backup to disk (SID : PROD)
ftp to test serverTest server: ASM on AIX single instance
clean up exiting database (SID : TEST)
rman restore and recover command from disk The rman command i am using for backup is :
run
allocate channel backup_disk1 type disk;
allocate channel backup_disk2 type disk;
allocate channel backup_disk3 type disk;
sql "ALTER SYSTEM ARCHIVE LOG CURRENT";
backup
format='<path>/Sml_full_bck_%Y%M%D_%d_%s_%p.dbf'
database
plus archivelog
filesperset=1;
backup
format='<path>/Tp_cntl_%Y%M%D_%d_%s_%p.ctl'
current controlfile;
#sql "alter system switch logfile";
release channel backup_disk1;
release channel backup_disk2;
release channel backup_disk3;
What would be ideal command for restore....we have some issues with network....need to ftp manually after taking backup..i am looking around for the restore command like
run
allocate channel t1 type disk;
restore database from '/<path>' to '+DATA';
recover database;
release channel t1;
just want some clarifications on syntax especially from disk backup restore to ASM disk groups and recover from there.. -
Best wasy to move OC4J from Production to Test MidTier
I've read the documents but I am still lost on the best way to move a OC4J instance to another MidTier
I have 3 separate OC4J instances that are deployed for 3 separate divisions that contain different apps.
What is the easiest way to move them to a different MidTier in a different environment. (in my case same OS,portal 10.1.2 just slightly different layout)
I have worked though the create a test from production and have my test up and running. I just need to deploy the production apps to the test environment. Both have separate MidTiers, Infrastures and database.
I know I can manually recreate OC$J instance names and then manually recreate the apps from the .ear files but is there a easier faster way to do this?
ThanksHi,
It's not a simple move, it's an upgrade...
So perhaps transportable tablespace can help you (export from 10gR1 and import into 10gR2 should be work).
Read the following doc for more info and sample :
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10825/dp_export.htm#i1006840
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10739/tspaces.htm#sthref1231
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#BEHFFDCD
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1267
Or export your db in dump file, on the new server, precreate your db as well, and import like for an upgrade :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#sthref67
Nicolas.
Message was edited by:
N. Gasparotto -
Operating level snapshot to prepare a test setup from a production database
Hi ,
Can any one explain the detaild process about Operating level snapshot to prepare a test setup from a production database
Thank YouHi;
Can any one explain the detaild process about Operating level snapshot to prepare a test setup from a production databaseMainly; We are using IBM disk and our disk team take snapshot of disk and we can work on those snapshot than storage team again revert back system orginal state.
As you can see its performed by storage team contact wiht your vendor.
If you dont have storage team than I suggest see my below post:
http://heliosguneserol.wordpress.com/2011/12/08/11g-snapshot-standby-for-real-time-testing/
Regard
Helios -
Transfering data from Production to QA for testing
Hi all,
We're doing support pack testing on our systems but unfortunatly the data in QA is very old so we'd like to transfer new data to test with.
After looking around it looks like we need to do Profile copy, is that all what I need? Or should we do a whole backup/restore DB from Production to QA?
Do I need any other 3rd part tool?
Do I need to do only a copy data or do I need to change some configurations? Like Source System,Central System, Instance confugration?
Thank you much!Hi samer,
If you want to transfer data only ( without configuration ) between systems, then you need Third party.
and as far as I know, there is two options :
a) a full client copy, which system admins are reluctant to do on a weekly basis
b) a third party product like EPI-USE, Arinso Transfer tool. It works fine for master data, Payroll and Time Data but for OM data, it is a distaster. But at least, I can download pernr at will, when troubleshooting.
Hope this helps,
Regards
Anup. -
I have restored from file backup an ADAM instance onto our QA server that was backedup from a production ADAM instance.
The instance functions fine except that for stuff like FSMO roles, it still thinks its connected to the production ADAM instance.
How can I completely disconnect and cut off this restored instance from production?
I never want this replica to ever replicate with produciton again.
This should be a standalone QA ADAM instance for testing only.
The only thing I might want to do is add another QA ADAM server for this instance to replicate with.
Thanks.Hi,
When install a new ADAM instance, you have the option to replicate from another ADAM instance. After that, you can configure/delete site and replication information to prevent replication. Please refer to the following article.
Administering replication and configuration sets
http://technet.microsoft.com/en-us/library/cc783192(WS.10).aspx
Manage Replication, Sites, and Configuration Sets
http://technet.microsoft.com/en-us/library/cc786365(WS.10).aspx
Also, other articles are very helpful, please read them to get more information.
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights. -
Transfer content of BO XI 3.1 from production to test
Hi all!
I have separate production system BO XI R3.1 FP 1.3 and a test system BO XI R3.1 FP 1.7.
After a crash I tried to use the import wizard to move the content of production to test. When I create a biar file with the Import Wizard under 1.3, this file is not recogized within Import Wizard 1.7.
Is there another way to copy all items within the BO XI server?
I tried with the Live Cycle Manager - but failed, as not all objects can be choosen for transfer.
Can I use the repository database from production and copy it to test? How can I change then the CMS server settings?
ciao HakanSo here the solution:
1. Open CCM
2. Stop Server Intelligence Agent (SIA)
3. Open Properties -> Configuration -> Specify
4. Copy from existing Datasource (Prod) to new Datasource (will be overwritten/Test)
5. Check change Clustername to define the new clustername
6. close
7. Open CCM
8. Add new Server Intelligence Agent (last option - don't recreate)
9. Provide "Name and Port" : SIA2 port: 6410 -> on second register port: 6400
10. Define Datasource (Test) - be aware of your production environment had auditing enabled you need the specify also an audtition database in Test too.
11. Start the new entry within CCM for SIA2
12. If everthing was okay, delete the existing node within CMC Website
13. in CCM delete the obsolete entry for SIA - if not possible you need to hack the registry entries for services under Windows /currentcontrolset .. service is listed as BO120SIASIA
I have my test still running, but if anything changes I will post them here. -
How to create a new connection from SAPGUI to Test drive?
Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh -
hi Friends ,i need a suggestion from you on how to
insert data to all tables on a Database "A " on Test server
Select data from all tables on a Database "A" on Production Server
where id=123
Database A is same with Structures on Test and Production also all Tables will have Id column in common.
The purpose of this insert is ,as we all know Production has the latest data and i need to push to test server on request for particular ID only ( may be weekly once or twice a week )
I have a linked server setup name "LINQ"
Example for one table is below , like wise i need a script which does for 154 tables.
Insert into ABC( id, name)---insert to test server
Select Id, name from LINQ.ProdSerevrname.databasename.ABC where id = 123
Please help me ..
ThanksWhy not use export import wizard for this if you've read access to production?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Database refresh from production to test database
Dear All,
i want to refresh data on test database using production database.Test and production database has same backend structure.
i am using following steps.Please correct if i am wrong any where.
1)Take Full export from producion database
2)DROP SCHEMA ON test database.SKIP schema like sys,system and other oracle schemas.
3)do full import on test database.
is this correct way to refresh the data on other enviornmet.
Thanks.
rajeshuser12071799 wrote:
Dear All,
i want to refresh data on test database using production database.Test and production database has same backend structure.
i am using following steps.Please correct if i am wrong any where.
1)Take Full export from producion database
2)DROP SCHEMA ON test database.SKIP schema like sys,system and other oracle schemas.
3)do full import on test database.
is this correct way to refresh the data on other enviornmet.
Hi,
You can do one correction here :
Instead of taking full export backup , take export of only those schemas which you want to refresh.
You can use datapump to make it faster.
For improving speed please check
http://www.dba-oracle.com/oracle_tips_load_speed.htm
Regards
Rajesh -
Database refresh from production to test -how to clean existing test env
All,
My environment is
Both Production and Test databases are in two node RAC environment
Oracle version - 10.2.0.4.0
OS - RHEL5
Production database size 80GB
We need to refresh the test environment from production database. Complete objects, data etc should be refreshed.
We have a datapump export from production environment. With this export dump from production environment, I need to import into test environment.
So far, I have imported with this kind of dump to the fresh database only.
Now, we have already objects, data sitting in the test environment. How to clean the existing test environment and refresh the production datapump export dump.
I thought of dropping all the tablespaces in test (other than system,sysaux, undo and temp). But not able to drop few tablespaces, it is telling that index is available in other tablespaces, dependency errors etc.
Which is the best method to clean the existing test database. Management is not interested in dropping the test database and recreating it.I understand that you are Newbie , let give me simple steps.
Follow the steps on testing envi.
1. Drop only Application users that you want to refresh from Prod(Do NOT drop users system,sysaux.. or tablespaces)
2. Create the users that you dropped.
3. using import or import data pump import the data.
In case you want to import user"A" data to "B" use REMAP_SCHEMA option.
See the below link for data pump export/import with examples.
http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html
Hope this helps.
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
Click here for [How to add and remove OCR|http://oracleracexpert.blogspot.com/2009/09/how-to-add-and-remove-ocr-oracle.html]
Click here in [ Making decisions and migrating your databases |http://oracleracexpert.blogspot.com/2009/08/download-sql-developer-migration.html]
Click here to lean [ Static parameters change in SPFILE and PFILE|http://oracleracexpert.blogspot.com/2009/09/how-to-change-static-parameters-in.html]
Edited by: Satishbabu Gunukula on Sep 14, 2009 5:09 PM
Edited by: Satishbabu Gunukula on Sep 18, 2009 10:35 AM -
Missing datafile after cloing oracle EBS from production to test
Good Day
I have done a restore from the production system to the test system some time ago . Today I got an error on my test system saying ORA-00376: file 375 cannot be read at this time . After checking I found that the file seems to be missing on the test environment .
SQL > select file_name from dba_data_files where file_id=375 ;
/gldb11i/devdb/9.2.0/dbs/MISSING00375
So I got the name from production and since the file seems to be avilabe in test I did the rename as follows :
SQL> alter database rename file '/gldb11i/devdb/9.2.0/dbs/MISSING00375' to '/gld
b11i/oradevd/oradata/dev/gld16.dbf' ;
Database altered.
But when I tryed to recover the file I got the error .
SQL> recover datafile '/gldb11i/oradevd/oradata/dev/gld16.dbf'
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 375: '/gldb11i/oradevd/oradata/dev/gld16.dbf'
ORA-01122: database file 375 failed verification check
ORA-01110: data file 375: '/gldb11i/oradevd/oradata/dev/gld16.dbf'
ORA-01206: file is not part of this database - wrong database id
Ofcourse that is becuse my test dataabse was renamed from production name fmprod to test name fmdev .
Is there any way to recover the file ? . I have all the archive logs avilable . Can nid change the database id in the file if it is only one file ?
Why did I not get any errors when I was doing the post cloneing process ?
Please note my databse is versio 9.2.0.6
Many thanks to all1. Use Transportable feature to transport the remaining datafile from production to test.
How can I do that without stopping production or making it read only .
2. Reclone only that tabespace from Production to test.
How , I used the oracle provided scripts for the cloning process ie . adcfgclone.pl
3. Depending on the size of data contents, manually drop and recreate the tablespace in test, export contents from Production, import into test.
I am worried about the data consistancy . Will the database be consistant it I do that there might be tables on other tablespaces related to this tablespace
Thanks -
Links from tests to production classes
Our source tree has two top-level branches: one for test and the other for production classes. The package (subdirectory) structure is identical in both branches. This is, I believe a fairly common arrangement. However, it creates a problem with Javadoc that I haven't been able to solve. I want to build documentation collections separately for the two branches, so that the test and production classes aren't commingled. If I do this, I get warnings about @link references not being found wherever the documentation of a test class links to the documentation of a production class, even though they are in the same package. I've tried various solutions: "-link"ing to the production documentation, including both branches of the source tree in the source path and naming the test classes (rather than the packages) on the command line, etc. Nothing gives me the results I want.
Given how common (I believe) this organization is--to the extent that it's supported by some IDEs--I'm surprised I can't get Javadoc to do what I want. Am I missing something, or is this really not possible?I've tried that. It doesn't work.I assume you have the sources for one package split across two source locations. Have just tried this under Windows with jdk 1.5.0_06 and 1.4.2_10 and they both seem to allow this.
Created this class file in src1\p1\Reg.java
package p1;
public class Reg {
* Does something
public void doit(){
System.println("done it");
}And created this class file in src2\p1\Reg2.java
package p1;
public class Reg2 extends Reg {
* The main
public static void main(String[] args){
new Reg2().doit();
}And then ran the command:
javadoc -sourcepath "./src1;./src2" p1I get one set of documentation that includes both classes with links between them, but no errors.
Maybe you are looking for
-
Hp pavilion tx2110us drivers for windows 7
hello, i have a hp pavilion tx2110us entertainment notebook (tablet). i recently upgraded from vista home to windows ultimate. i have a few issues with this. i would be very happy if someone could help me here. 1. the tablet buttons (on the side of t
-
Problem in loading the library through Servlet
Hello, When i wrote an application which accesses my java component that has native methods and it loads the library that has the implementation of these methods, it works perfectly fine. But now when i am trying to access the same component through
-
May I Safely Delete My Older Version of Microsoft Office?
I recently installed Mavericks on my MacBook Pro. Mavericks does not support Microsoft Office 2004 for Mac, which I was using before installing Mavericks. Therefore, I have purchased and installed Microsoft Office 2011 for Mac. In "Applications" i
-
Never had a problem updating Adobe Flash Player over the last maybe 10 times, It downloads to 50% and then bottoms out with a (general install error) message. So the I uninstalled and tried to re-install to no avail. I don't know if I updated si
-
There is a problem with Firefox (38.0) about browser
When I load Firefox (38.0) it only displays 2 boxes no text 1 black and 1 white. But it acts normal when I use it in safe mode. But it gets really annoying when you have to shift + double click at the same time I use Windows 7 AdBlocker(Addon)