Prepare the drool cloths! New Mac Pro will make Aperture SCREEEAAAAMMMM!!!

Shipping TODAY
New Mac Pro
1.6 -2.1 faster than current PPC Quad
2.6 Ghz dual DuoCore
256 MB ram
Superdrive
$2499
All quad, up to 3ghz
Up to 16 GB memory
Up to 2 TB SATA internal storage with FOUR internal drive bays
4 PCI Express slots
Graphics up to radeon x1900 or FX4500
HOLY SMOKES!!!

Looks like a nice machine.
Bit dissapointed with the graphics options though - in the PC world you can get dual on one card Nvidia 7950GX2 cards which would absolutely destroy anything you can get for this machine.
I wonder if you could just buy a Radeon 1900XTX card and pop it in, if it would use the same drivers as the XT card.
On the memory front does anyone know if it NEEDS ECC RAM? ECC ram is hideously expensive and I'd really want 4gb for aperture.
CPU looks great and is actually very well priced, the Xeon's are very expensive chips.
notice also the tech specs for the screens have increased, and prices dropped.

Similar Messages

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

My new Mac Pro will not recognize my old Canon video camera

My new Mac Pro will not recognize my old Canon video camera

We've used the 400 to 800 firewire cables with limited success in the past...dropped frames was the main problem. Only used them until the Sonnet FireWire PCIe Card came in to allow a 400 firewire.

Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad. What's up?? How do I correct? This is after upgrading to iOS6 and Mountain Lion.

Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad. What's up?? How do I correct? This is after upgrading to iOS6 and Mountain Lion.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Looking to run autodesk inventor on a new mac pro* will it work?

Looking to run autodesk inventor on a new mac pro* using boot camp and windows.
Will it work or am I waiting my time?

As an alternative, though not an ideal FCS box, the Intel iMacs should be fine, and should fit into the same budget range as the MacBooks.
For serious FCP work, I wouldn't recommend an iMac, but for the purposes you've outlined, it should be acceptable, for the most part.
EDIT: My comment above is in reply to your comment about school purchases, not your original post about carrying around two laptops.

New Mac Pro: Will I need to toss out my esata RAID systems?

Can't wait to buy the new MacPro. However, I have 3 RAID systems, hooked up to ESATA RAID controllers. Will I be able to use these with the new mac pro? is there like a thunderbolt-estata raid converter?

There are several ThunderBolt to eSATA boxes avaiable:
http://eshop.macsales.com/item/Lacie/9000186/
This converts to ExpressCard34, then you add an eSATA expresscard to it:
http://eshop.macsales.com/item/Sonnet%20Technologies/ECHOPROE34/
http://eshop.macsales.com/item/Sonnet%20Technologies/SATAIIE1PE34/
This one is not quite available, but some online resellers are taking orders:
http://www.sonnettech.com/product/echo15thunderboltdock.html

Just bought new Mac Pro, will I be able to install my PPC apps?

Hello,
Just ordered a new Mac Pro Dual 2.0 online today. After reading a lot of posts on here, I'm wondering if I made the right decision and should have bought a Dual G5 Quad instead. Will my PPC apps install at all on the new Mac and will they run? I do a lot of audio work and I'm already noticing that there is a pretty long wait with the UB updates. Not really looking forward toward the hassle of updating everything all over again...Do you think the MP was a better investment than a refurbished G5 Quad? I assume I'll be able to install Logic Pro from my 7.0 DVD's and then upgrade to 7.2 or does it not work this way? I'm hoping that the upgrade to Logic 7.2 is not a paid upgrade. Since I just bought online yesterday, do you think they'd let me cancel before shipping?
Shane

PPC applications will run on Intel Macs through the Rosetta emulator. You will see a speed hit, however. Rosetta runs about 30 percent slower than native apps due to the emulation hit. The exception will be Java applications. Java applications that use the JNI libraries need to be converted to universal binaries in order to run on an Intel Mac. The other exception will be applications that require plug-ins and/or startupitems or install special frameworks. These will need to be universal binaries or they simply won't work on an Intel Mac.
If possible you will want to upgrade your PPC apps to their universal binary versions if such versions are available.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.

Has Apple provided any information about when a new Mac Pro will debut?

Has apple provided and indication of when a new Mac Pro might debut?

Thank you. The A in Apple is for ambiguity.

"Best" configuration for new Mac Pro used for Aperture?

I'm getting ready to order a new Mac Pro and would like to configure it to optimize Aperture performance.
On CPUs - I have found no benchmarks which show whether Aperture would benefit from 2 quad core processors versus 1. Does anyone know of any benchmarks or have any experience using a single quad core? I don't want to spend $500 on a 2nd processor if Aperture can't use it.
On Graphics cards - I was sold on the GForce 8800, due to it's supposed blazing speed for gaming and it's larger on board memory. However, after reading the following review http://www.barefeats.com/harper10.html , these guys seem to imply that applications such as Aperture actually run faster with the standard Radeon 2600 video card! If anyone has any experience or opinions on this review, I'd love to hear them!
On memory - I know from experience that Aperture will use all of the physical memory you make available to it. I plan on ordering the standard 2GB from Apple, then adding 8GB from 3rd party for total of 10MB.
Any help would be greatly appreciated.

I can only say that when faced with the same decision last month, I went with a 2.8 8-core/8800GT/10gb RAM/library stored on 2nd internal drive setup and am completely satisfied with Aperture's speed. Beyond satisfied, really, borderline thrilled to be honest. No beach balls, perfectly responsive adjustment sliders, smooth and quick scrolling through images (even with Quick Preview mode turned off). Aperture 2 definitely takes advantage of all 8 cores - I have MenuMeters installed and can watch its CPU usage across all 8 cores. Exporting, for example, is fast and uses all cores for background processing.
I have seen a couple small anomalies though...when moving photos around in a light table, I get some odd flashing artifacts on the right side of screen that could be graphics card related. Visually annoying but it doesn't affect performance. I'm also seeing some weird behavior with keywords not appearing in Tooltips and in the Viewer, but it's intermittent and is most likely a software bug and not my hardware setup.

2013 new Mac Pro will not boot up from and external hard drive

New 2013 MAC PRO running Yosemite will not not see a bootable external hard drive when starting up using option key? Same External hard drive will boot up on 2013 Mac Book Pro running Yosemite.

Reading between tea leaves sometimes leaves some things to imagination.
You used SuperDuper latest version that was recently upgraded for Yosemite on a laptop running 10.10 (or even 10.9.3+) that is in a X-brand USB3 drive enclosure, not bus powered btw, moved it to the nMP and plugged it into a direct port, not going through a hub (monitors have hubs of course and there is only one real bus+controller on the nMP that ALL USB3 travels through.
Thunderbolt and self-powered would be nice but they cost a bit more.
I have read where Carbon Copy Cloner (now v 4.x) worked where others failed. I use to use both but have used CCC since its inception and use back in 10.2.2 forward along with SD! for a few years based on comments here.
Drivers missing? someone compared system extensions and found the ones needed for say the nMP are not there? how about running a 10.10.1 combo update and see if that changes - we USE to be able to apply updates to a system that we were not booted from, very handy (could update a sparse disk image of a system that way, one created with CCC).
WD Passports seem popular with laptop users, but they come here to this forum complaining that it doesn't work, disappears off the bus (spins down goes to sleep, acts like a green drive acts).

Looking to buy a new mac pro will there be a i7 version?

I have an iMac 24" and looking to get a mac Pro as my needs have changed.
I have compared an iMac and 2.66GHz Quad-Core Intel Xeon "Nehalem" processor ( two (friends) side by side and I have to say there is nothing in it, my initial thoughts were the Imac has better graphics and seems faster using Photoshop and final cut.
Does anyone know if they will make a i7 version (non xeon) and if the price will drop as the Mac pro seems to be so very expensive since the introduction of the i7 Imac in the region of £800 I'd say.

http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
No, Mac Pro = Xeon, and there is quad 3.3GHz BTO $1200 extra.
You were looking at 2009 Mac Pro? sounds like 2006-7 model possibly.
Whether you need more hard drives and memory then an iMac Core i5 is up to you.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
http://www.barefeats.com/imi7.html

New Mac Pro will not start

Hi,
After doing the last update from apple my Mac Pro (late 2013) won't start up.
I installed the update this morning and every thing was working fine. After (ironically enough playing watch dogs) my Mac Pro went to sleep and never woke up. I have fanatically tried everything in my capacity to make it go on again without any result.
The lights in the back goes on but there is no chime or fan noise from the mac. The screens does not go on either.
I have tried to unplug the screens and tried every configuration possible with screens and without. Keyboard and no keyboard.
But the only result I get is the ligths in the back going up, and then down again...
I need help!

I think it is plugged in since the OP said "The lights in the back goes on"
Ho Lee MACkeral wrote:
Have you unplugged the Mac Pro?
You may also wnat to try zapping the PRAM and reset the SMC.

What's the status of new Mac Pros and CC 2014?

I've read some horror stories on this forum about new MacPros not being much faster with Pr CC or CC 2014. Since Pr accounts for about 80% of my income, I'm not inclined to spend $10K for a system with no net gain in speed, and an increase in problems and downtime.
I realize part of the problems may be with Mavericks and third party drivers; but if the whole system doesn't work well together, it's a no-go, and that many users don't come to the forums if their systems are working great. But, if the outlook is encouraging, I might start planning to upgrade from my trusty ol' MacPro3,1 and Quadro 4000, which running 10.8.5 has been more or less a dream, with a few bumps along the way (most if not all of which have been solved by Mark and Kevin from Adobe here. Thanks, guys!)

I appreciate that Sony Raw (.mxf) was fixed in 7.2. However, despite the update saying it contained additional Raw fixes, it still seems that Sony Raw (.dngs) are not being handled correctly by Adobe.
Is there any estimate on when this might be available?
Thank you,
Ted

Premiere Pro CC and the New Mac Pro (2014)

I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
1. Is this true?; and
2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
My new Mac Pro will have the following configuration:
3.5GHz 6-core with 12MB of L3 cache
32GB (4x8GB) of 1866MHz DDR3 ECC
1TB PCIe-based flash storage
Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading. I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
Enviado desde mi iPhone
El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
Re: Premiere Pro CC and the New Mac Pro (2014)
created by BanksMeador in Premiere Pro - View the full discussion
I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
I get similar playback performance to what I experienced on my 09 Mac Pro tower.
Any insights on getting better playback performance in this scenario would be greatly appreciated.
Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Looking for Thunderbolt 2 RAID Array options that can match the new Mac Pro's quietness -- or at least come close!

Maybe it is too early to talk about anything beyond the Pegasus2 Series (http://www.promise.com/promotion_page/promotion_page.aspx?region=en-global&rsn=1 00) when it comes to Tunderbolt 2 storage options. Looking for something on the order of 8 to 12 usable TB of redundant storage or possibly a JBOD option of 4 bays. This is coming close but I do not think it is Thunderbolt 2 (http://www.g-technology.com/products/g-raid-thunderbolt).
Either way -- looking for users experience not only on usable Thunderbolt 2 solutions but more importantly noisiness. I want to upgrade my existing Mac Pro to one of the new ones and I have found the old one to be nearly unnoticable in a quiet desktop environment. Would love to find the same peace and quiet when migrating to the new form factor that is going to need external storage to match what I have been used to inside the old Mac Pro.

Not your quiet storage, but then I would put it in a cool closet or small room off to the side :-)
http://www.macgurus.com/store/Item/ARC8050 ( I was assuming but maybe not, that it would support RAID6 which is always preferable for larger arrays. Seems to have most features you want for 8 drives). MacGurus "Burly" are never quiet but they are rugged and well tested.
Migrating storage will be a concern. I don't like the noise from my older SATA OWC dual-drive metal enclosure though suppose to be 'acceptable' unless they have improved the fans they are out for me.
OWC for Thunderbolt products.
Helios enclosure (the new dual-slot Helios PCIe chassis)
… moving various hard drives into Thunderbolt cases
USB3 hard drive enclosure.
For those without eSATA enclosures, a simple eSATA to USB3 adapter might do the trick.
USB3 is plenty fast to house two hard drives.
OWC Mercury Elite Pro Dual.
Available now starting at about $430.
review of the OWC Mercury Elite Pro Dual.
Some upcoming new TB2 enclosures:
http://www.sonnettech.com/product/thunderbolt/index.html
http://gigaom.com/2013/12/21/the-technology-gap-between-the-old-and-new-mac-pro- could-cost-you-a-mini/

Prepare the drool cloths! New Mac Pro will make Aperture SCREEEAAAAMMMM!!!

Similar Messages

Maybe you are looking for