Preparing to configure windows message
Hi. My Toshiba Satellite laptop is stuck with the message "Praparing to configure Windows - Don't turn off your computer". How do I fix it??
Sounds like you were either in the shutdown or powering up phase after a Windows update that required a restart. I would do a hard reset by holding down the power button for 8 seconds or so or until the computer shuts completely down. Wait a few seconds and turn the Power back on.
Just go with the flow when it powers back up. It may do so normally or it may immediately try to install the updates again and if it does, let it try and see what happens.
If you ever come back here again for any help, please include your complete model and OS info as in my examples below and explain your situation thoroughly.
Good Luck!
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit
Similar Messages
-
TX2Z with Windows 7 stuck on "Preparing fo configure Windows"
Hi,
New here and have the TX2Z for just 2 weeks. Boot up the laptop this morning and screen is stuck with this message of "Preparing to configure Windows. Do not turn off computer" . I though tried pressing ctrl + alt + del but nothing.
Thanks in advance for the helpsatellite laptop l745d-s4320 Psk16u - 009001
Satellite L745D-S4230 (PSK16U-009001)
when opening my laptop it is always stuck on starting windows screem ( the screen with windows logo )
You need to reach the recovery environment.
What are the system recovery options in Windows 7?
When you get there, try a Startup Repair. Sometimes it takes several tries.
If that doesn't work, do a System Restore.
And there are other things to try as well.
-Jerry -
Windows small business Server 2011 standard took long time to log (preparing to configure windows)
Hi,
I have Hp DL380G7 with 2011 SBS
it took very long time to log to the desktop when ever i restart the server.
now
i shutdown the server, then start it again since 2 hours , till now it show me
(preparing to configure windows) Do not turn off your computer.
what should be done and what should i consider so i do not face such problem later
thank youHi fatem,
Before going further, would you please let me confirm something more?
Can you remember which operation had been done, then this issue occurred firstly? Installed some updates or any other operation?
When this issue occurred, please check if you can ping and RDP to this SBS 2011 standard.
On current situation, it’s hard to say the root cause of this issue. I suggest that you can restart the SBS
2011 standard in Safe Mode with Networking and check if this issue still persists.
If more details you can find, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Preparing to configure windows please do not turn off windows server 2008 r2
Preparing to configure windows
Please do not turn of your computer.
We see this skin a long time (3 Hours) but server not start. If we remove LAN cable on the server then the server automatic run but exchange server all services not run automatic and user can't connect to the Exchange 2010 SP3.
Md. Ramin HossainHi,
This problem occurs when the Windows Modules Installer Service was stuck during stopping or starting.
Checkou the below link for article on similar problem,
http://www.petenetlive.com/KB/Article/0000657.htm
Regards,
Gopi
JiJi
Technologies -
Preparing to configure Windows... for 13 hours now
I reinstalled Windows 7 for reasons that could be explained in an entirely separate thread.
Anyway, Windows 7 is stuck on the "stage 3 of 3 Preparing to configure Windows" screen and has been since late last afternoon. So for a good 13 hours.
I'm not supposed to turn the computer off...
So do I wait until the world comes to an end or do I have other options?
Yes, this is happening after running MS Update after the reinstall.
We really don't have this kind of time to waste.This was a GREAT tip. I only waited about 15 minutes before using Google to find this answer. Once I pressed
Crtl+Alt+Del to log in, there was an additional update to be done. It proceeded as it should have, and all is well. Thank you for saving me alot of time and frustration.
Smihlen -
Ocassional slow start up with Preparing Windows message
I have a new Toshiba C855D Satellite laptop that came with Windows 8.
On about three ocassions now, when I turn on the computer to boot up, it takes a lot longer than usual... then eventually it shows the message "Preparing Windows." After that happens I get on and see my front page/start screen almost empty like it's in a default state with just Toshiba icon and some other few things.
I sign out and resign onto my user name and everything is back to normal.
I think the last thing I did prior to this last incident happening was using Windows Update, then shutting down after it was updated/installed. Could this be related?
What is causing these two issues (long boot time with Preparing Windows message, then the having to sign out and sign back in to access my regular start screen/desktop,etc?
Thanks for the help.Satellite C855D-S5116
So this is an out of the ordinary problem and not some Windows update/Win 8 issue?
We don't know. But a new machine should just work. I returned a Windows 8 machine to Best Buy recently for problems very much like you described.
You don't need another drive. Restore the machine this way.
Settings > Change PC settings > General tab > Remove everything and reinstall Windows
-Jerry -
Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu -
"Failure configuring Windows updates. Reverting changes" - Post-reboot status 0x800f0922
Server 2012 [6.2.9200] Standard Core
VMWare VM running in BIOS mode (*not* UEFI)
It is a production Read-Only Domain Controller. DC functionality is currently unaffected. Replication and diag all show 'green'
We have an internal WSUS server and there are currently 8 pending updates:
Security Update for Windows Server 2012 (KB2853587)
Security Update for Windows Server 2012 (KB2923392)
Security Update for Windows Server 2012 (KB2973501)
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
Update for Windows Server 2012 (KB2995387)
Security Update for Windows Server 2012 (KB3000061)
Update for Windows Server 2012 (KB3000988)
Regardless of whether I install them all at once or go through them one by one, upon reboot, I get the error message ""Failure configuring Windows updates. Reverting changes". This box has previously had updates applied successfully however
the last successful update was prior to installing the ADDS role and promoting it to a RODC.
ReportingEvents.log
{A94C6378-4107-430E-9B9D-76088CE63CFF} 2014-10-17 09:30:16:165-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
{ED5CABD7-8DB0-4C53-AFD1-E292BB5A8198} 2014-10-17 09:30:16:165-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
{559FBACF-6FCB-4540-A999-A566C128FEAF} 2014-10-17 09:35:31:851-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
{0C901AA0-07A7-4540-8A12-39F30770E2D5} 2014-10-17 09:35:40:665-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 0 (null) Success Content Download Download succeeded.
{2B0E6215-61FA-4A5E-9C61-3926CA038D4C} 2014-10-17 09:35:42:256-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 0 (null) Success Content Download Download succeeded.
{200D0802-2103-42D7-B827-D8D030CD088F} 2014-10-17 09:35:45:953-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 0 (null) Success Content Download Download succeeded.
{BAE97C9F-94AB-4E09-8388-471B101153C3} 2014-10-17 09:35:48:418-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 0 (null) Success Content Download Download succeeded.
{DD2DDC26-4878-4341-A624-6554B0265CB9} 2014-10-17 09:35:50:493-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 0 (null) Success Content Download Download succeeded.
{A6036EBE-D66E-4840-B6C8-409F036106BC} 2014-10-17 09:35:56:405-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 0 (null) Success Content Download Download succeeded.
{62F5A078-93F6-45FE-934F-E4F443E6BE69} 2014-10-17 09:35:57:029-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 0 (null) Success Content Download Download succeeded.
{CFAE64D9-FFCA-49A7-911D-134F7307D308} 2014-10-17 09:36:01:897-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 0 (null) Success Content Download Download succeeded.
{A3ADCF16-5037-493E-BB35-D9CB373DAA3D} 2014-10-17 09:36:03:831-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 240005 (null) Success Content Install Installation pending.
{178EA9C2-BF23-4219-946A-66DA592F88D9} 2014-10-17 09:36:04:642-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 240005 (null) Success Content Install Installation pending.
{15D42F71-652C-4D52-92F5-BD5453AC9E5E} 2014-10-17 09:36:06:171-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 240005 (null) Success Content Install Installation pending.
{09EA6B96-82E0-4E60-9927-E05905FAEFEA} 2014-10-17 09:36:07:793-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 240005 (null) Success Content Install Installation pending.
{42CEC48F-3F9D-461A-8E27-C906775E8828} 2014-10-17 09:36:09:868-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 240005 (null) Success Content Install Installation pending.
{8726869B-6485-4754-BAD6-6F4B475F46B4} 2014-10-17 09:36:15:999-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 240005 (null) Success Content Install Installation pending.
{409A3494-2A03-4F15-825D-1D41371DC87F} 2014-10-17 09:36:19:322-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 240005 (null) Success Content Install Installation pending.
{52965D52-2DB3-4E88-9481-4D3D59AD52D5} 2014-10-17 09:36:26:810-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 240005 (null) Success Content Install Installation pending.
{F43E4A5F-E53C-4554-A905-A1B41EE024E0} 2014-10-17 09:40:24:927-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Update for Windows Server 2012 (KB3000988).
{B7504C25-377E-4FB2-83DD-6B8EF50AA081} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB3000061).
{0B2C14FB-5000-4BFD-A06B-73AB944D7297} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Update for Windows Server 2012 (KB2995387).
{8FDB7384-BD2B-4B29-9A12-02075A4B0A55} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577).
{AB2869B9-963E-445B-BC05-655B1D007912} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042).
{70C10EF0-4C29-4333-9DB3-F9F6A24E33F2} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2973501).
{AE7088FF-7517-46DE-ABB5-873A0B8B8B09} 2014-10-17 09:40:24:957-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2923392).
{3577AE7C-A861-43B6-A7B4-65383F6148F3} 2014-10-17 09:40:24:973-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2853587).
{FE35AF71-70B3-4637-AED1-F2F9CBF2B282} 2014-10-17 10:08:14:141-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
{CBD02322-EA98-4C5C-8DD2-137FFAC595B7} 2014-10-17 10:08:14:141-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
I have taken the following steps based on research without success:
Restarted the box - try again
Complete shutdown - try again
verified with my VMWare admins that there is no 'Secure Boot' or similar option set on the VM
Shutdown wuauserv, renamed SoftwareDistribution, started the service back up, reattempt
installed, but did not enable/configure, BitLocker Drive Encryption feature
sfc /scannow - no errors found
dism /online /cleanup-image /checkhealth and /scanhealth - neither found any issues
verified that the 'System Reserved Partition' is the correct size (350MB) and has free space (115MB)
deactivated the OS license, reactivated the OS license - no change
Pointed to the MS Windows Update servers instead of local WSUS
I have a little flexibility in how I repair this box. Given that DC functionality is unaffected and that this specific DC is not used heavily I want to try to repair it rather than wipe it out and rebuild it. I have not yet attempted to run updates on our
other, non-Read-Only DCs. If I run in to the same problem on them, I won't have as much leeway so I want to try to come up with a repair process if needed. I also have some concern regarding my ability to demote it from it's DC role given its current state.
There is nothing to indicate that that would also be a problem, but I would prefer to get it in working order before attempting a demotion.
Any help and insight would be greatly appreciated.
Full WindowsUpdate.log to follow due to post size restrictions.
Justin Cervero - MS Enterprise Admin - Appalachian State UniversityPre-Reboot WindowsUpdate.log
Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
Misc = Process: C:\Windows\system32\svchost.exe
Misc = Module: c:\windows\system32\wuaueng.dll
Service *************
Service ** START ** Service: Service startup
Service *********
Agent * WU client version 7.8.9200.17099
Agent * Base directory: C:\Windows\SoftwareDistribution
Agent * Access type: No proxy
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
Agent * Network state: Connected
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
DtaStor Data store successfully created
Agent *********** Agent: Initializing global settings cache ***********
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
Agent * WSUS server: http://wsusserver
Agent * WSUS status server: http://wsusserver
Agent * Target group: Systems
Agent * Windows Update access disabled: No
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
WuTask WuTaskManager delay initialize completed successfully..
Report CWERReporter::Init succeeded
Agent *********** Agent: Initializing Windows Update Agent ***********
DnldMgr Download manager restoring 0 downloads
AU ########### AU: Initializing Automatic Updates ###########
AU AIR Mode is disabled
AU # Policy Driven Provider: http://wsusserver
AU # Detection frequency: 22
AU # Target group: Systems
AU # Approval type: Pre-install notify (Policy)
AU # Auto-install minor updates: No (User preference)
AU # Will interact with non-admins (Non-admins are elevated (Policy))
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
AU AU finished delayed initialization
Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
Misc = Process: C:\Windows\System32\cscript.exe
Misc = Module: C:\Windows\System32\wuapi.dll
COMAPI -------------
COMAPI -- START -- COMAPI: Init Search [ClientId = <NULL>]
COMAPI ---------
COMAPI -------------
COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
COMAPI ---------
Report *********** Report: Initializing static reporting data ***********
Report * OS Version = 6.2.9200.0.0.131344
Report * OS Product Type = 0x00000007
Report * Computer Brand = VMware, Inc.
Report * Computer Model = VMware Virtual Platform
Report * Platform Role = 1
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
Report * Bios Revision = 6.00
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
Report * Bios Release Date = 2013-07-30T00:00:00
Report * Bios Sku Number unavailable.
Report * Bios Vendor = Phoenix Technologies LTD
Report * Bios Family unavailable.
Report * Bios Major Release = 4
Report * Bios Minor Release = 6
Report * Locale ID = 1033
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
Agent *************
Agent ** START ** Agent: Finding updates [CallerId = ]
Agent *********
Agent * Online = Yes; Ignore download priority = No
Agent * Criteria = "IsInstalled=0 and Type='Software'"
Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
Agent * Search Scope = {Machine}
Agent * Caller SID for Applicability: S-1-5-21-3125904992-2106718063-2989486192-100700
EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
PT +++++++++++ PT: Synchronizing server updates +++++++++++
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
PT WARNING: Cached cookie has expired or new PID is available
EP Got WSUS SimpleTargeting URL: "http://wsusserver"
PT Initializing simple targeting cookie, clientId = 5cb617c5-4bcc-44a6-a8bc-6f5d116a9dc3, target group = Systems, DNS name = rodcserver
PT Server URL = http://wsusserver/SimpleAuthWebService/SimpleAuth.asmx
Driver WARNING: No system hardware ids found
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
Agent * Added update {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202 to search result
Agent * Added update {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201 to search result
Agent * Added update {2346EB42-185C-49CC-9856-190C294FE502}.202 to search result
Agent * Added update {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202 to search result
Agent * Added update {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203 to search result
Agent * Added update {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200 to search result
Agent * Added update {DF82A201-7E54-420E-A08C-3281F731C3D7}.202 to search result
Agent * Added update {957ACF74-78FB-4045-91E5-A8714DD0915F}.200 to search result
Agent * Found 8 updates and 73 categories in search; evaluated appl. rules of 693 out of 1048 deployed entities
Agent Reporting status event with 8 installable, 92 installed, 0 installed pending, 0 failed and 0 downloaded updates
Agent *********
Agent ** END ** Agent: Finding updates [CallerId = ]
Agent *************
Report REPORT EVENT: {A4CA39D6-71D6-48DB-B678-7A793B95B2A0} 2014-10-16 21:01:20:736-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
Report REPORT EVENT: {3F841CDC-22AC-4A45-8A6A-C426A1CA65C9} 2014-10-16 21:01:20:736-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
Report CWERReporter finishing event handling. (00000000)
COMAPI - Updates found = 8
COMAPI ---------
COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
COMAPI -------------
COMAPI -------------
COMAPI -- START -- COMAPI: Download [ClientId = <NULL>]
COMAPI ---------
COMAPI - Forced: No; Download priority: 3; Network Cost Policy: 0
COMAPI - Updates in request: 8
COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
COMAPI <<-- SUBMITTED -- COMAPI: Download [ClientId = <NULL>]
DnldMgr *********** DnldMgr: Begin Downloading Updates [CallerId = ] ***********
DnldMgr * Call ID = {BD88591F-3074-490D-8D97-2D2018AA40F0}
DnldMgr * Priority = 3, NetworkCostPolicy = 0, Interactive = 1, Owner is system = 0, Explicit proxy = 1, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
DnldMgr * Updates to download = 8
Agent * Title = Security Update for Windows Server 2012 (KB2853587)
Agent * UpdateId = {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202
Agent * Bundles 1 updates:
Agent * {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
Agent * Title = Security Update for Windows Server 2012 (KB2923392)
Agent * UpdateId = {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201
Agent * Bundles 1 updates:
Agent * {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
Agent * Title = Security Update for Windows Server 2012 (KB2973501)
Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
Agent * Bundles 1 updates:
Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
Agent * UpdateId = {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202
Agent * Bundles 1 updates:
Agent * {5CFECF17-2661-4D81-9211-6B85CF760867}.202
Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
Agent * UpdateId = {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203
Agent * Bundles 1 updates:
Agent * {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
Agent * Title = Update for Windows Server 2012 (KB2995387)
Agent * UpdateId = {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200
Agent * Bundles 1 updates:
Agent * {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
Agent * Title = Security Update for Windows Server 2012 (KB3000061)
Agent * UpdateId = {DF82A201-7E54-420E-A08C-3281F731C3D7}.202
Agent * Bundles 1 updates:
Agent * {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
Agent * Title = Update for Windows Server 2012 (KB3000988)
Agent * UpdateId = {957ACF74-78FB-4045-91E5-A8714DD0915F}.200
Agent * Bundles 1 updates:
Agent * {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
DnldMgr No locked revisions found for update CD2A752F-FF51-46A5-8134-54DD0AE32D2A; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update CD2A752F-FF51-46A5-8134-54DD0AE32D2A to the lock revision cache.
DnldMgr No locked revisions found for update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE to the lock revision cache.
DnldMgr No locked revisions found for update 4193EAE0-AE33-4774-B479-D9660D15E5F2; locking the user-specified revision.
DnldMgr Adding revision ID 201 for update 4193EAE0-AE33-4774-B479-D9660D15E5F2 to the lock revision cache.
DnldMgr No locked revisions found for update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6; locking the user-specified revision.
DnldMgr Adding revision ID 201 for update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 to the lock revision cache.
DnldMgr No locked revisions found for update 2346EB42-185C-49CC-9856-190C294FE502; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update 2346EB42-185C-49CC-9856-190C294FE502 to the lock revision cache.
DnldMgr No locked revisions found for update 041EDA5D-FF28-450B-AA8C-557161884100; locking the user-specified revision.
DnldMgr Adding revision ID 201 for update 041EDA5D-FF28-450B-AA8C-557161884100 to the lock revision cache.
DnldMgr No locked revisions found for update 8001616A-1D31-4D17-B3DC-861E3CE0C3E3; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update 8001616A-1D31-4D17-B3DC-861E3CE0C3E3 to the lock revision cache.
DnldMgr No locked revisions found for update 5CFECF17-2661-4D81-9211-6B85CF760867; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update 5CFECF17-2661-4D81-9211-6B85CF760867 to the lock revision cache.
DnldMgr No locked revisions found for update C822D00A-FEC3-4B65-8F63-6E6BEA292944; locking the user-specified revision.
DnldMgr Adding revision ID 203 for update C822D00A-FEC3-4B65-8F63-6E6BEA292944 to the lock revision cache.
DnldMgr No locked revisions found for update 0D796BFF-1B7A-41D0-9E20-D7087F570410; locking the user-specified revision.
DnldMgr Adding revision ID 201 for update 0D796BFF-1B7A-41D0-9E20-D7087F570410 to the lock revision cache.
DnldMgr No locked revisions found for update FD33CBA9-736E-4E42-8FC6-91F5534670C6; locking the user-specified revision.
DnldMgr Adding revision ID 200 for update FD33CBA9-736E-4E42-8FC6-91F5534670C6 to the lock revision cache.
DnldMgr No locked revisions found for update D5D6C690-7BCA-441B-9319-3278EB1E55AE; locking the user-specified revision.
DnldMgr Adding revision ID 200 for update D5D6C690-7BCA-441B-9319-3278EB1E55AE to the lock revision cache.
DnldMgr No locked revisions found for update DF82A201-7E54-420E-A08C-3281F731C3D7; locking the user-specified revision.
DnldMgr Adding revision ID 202 for update DF82A201-7E54-420E-A08C-3281F731C3D7 to the lock revision cache.
DnldMgr No locked revisions found for update E396BB10-86E0-4C7D-8E26-8B864103FE74; locking the user-specified revision.
DnldMgr Adding revision ID 201 for update E396BB10-86E0-4C7D-8E26-8B864103FE74 to the lock revision cache.
DnldMgr No locked revisions found for update 957ACF74-78FB-4045-91E5-A8714DD0915F; locking the user-specified revision.
DnldMgr Adding revision ID 200 for update 957ACF74-78FB-4045-91E5-A8714DD0915F to the lock revision cache.
DnldMgr No locked revisions found for update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908; locking the user-specified revision.
DnldMgr Adding revision ID 200 for update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 to the lock revision cache.
EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
PT +++++++++++ PT: Synchronizing file locations +++++++++++
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
Handler Generating request for CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE in sandbox C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2853587-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {B74E24AD-0BC1-4F12-8562-2EACC741B4B3}
DnldMgr * Downloading from http://wsusserver/Content/DD/E5743ACAD2AEFCD99979F1680501AD9D120A0BDD.cab to C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530\windows8-rt-kb2853587-x64.cab (full file).
DnldMgr *********
DnldMgr ** END ** DnldMgr: Begin Downloading Updates [CallerId = ]
DnldMgr *************
DnldMgr BITS job {B74E24AD-0BC1-4F12-8562-2EACC741B4B3} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530\windows8-rt-kb2853587-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 58979, bytes transferred = 58979
DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
Handler Generating request for CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE in sandbox C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
Handler Generating request for CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 in sandbox C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2923392-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {810D170F-D6E6-494B-98F9-6EA8EAAFB70C}
DnldMgr * Downloading from http://wsusserver/Content/56/2CAD1BFE488CF3B0EB93F48400A542CB72965056.cab to C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7\windows8-rt-kb2923392-x64.cab (full file).
DnldMgr BITS job {810D170F-D6E6-494B-98F9-6EA8EAAFB70C} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7\windows8-rt-kb2923392-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 500177, bytes transferred = 500177
DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
Handler Generating request for CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 in sandbox C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2973501-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {5D9BAB80-C055-4BB5-A445-58D78D37D7AA}
DnldMgr * Downloading from http://wsusserver/Content/D3/05BDA5A7A88A70739E71C166263CC40C45A2ADD3.cab to C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de\windows8-rt-kb2973501-x64.cab (full file).
DnldMgr BITS job {5D9BAB80-C055-4BB5-A445-58D78D37D7AA} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de\windows8-rt-kb2973501-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 8580759, bytes transferred = 8580759
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {5CFECF17-2661-4D81-9211-6B85CF760867}.202
Handler Generating request for CBS update 5CFECF17-2661-4D81-9211-6B85CF760867 in sandbox C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2978042-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {717CEFF6-05A0-4E81-83EC-DD900B1D675E}
DnldMgr * Downloading from http://wsusserver/Content/8B/E6C82EE971D152ADB9DEC1906EA9D53D7638328B.cab to C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4\windows8-rt-kb2978042-x64.cab (full file).
DnldMgr BITS job {717CEFF6-05A0-4E81-83EC-DD900B1D675E} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4\windows8-rt-kb2978042-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 2951091, bytes transferred = 2951091
DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {5CFECF17-2661-4D81-9211-6B85CF760867}.202
Handler Generating request for CBS update 5CFECF17-2661-4D81-9211-6B85CF760867 in sandbox C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
Handler Generating request for CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410 in sandbox C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2979577-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {F801B6AB-04F3-4783-8E64-C5E816022C6A}
DnldMgr * Downloading from http://wsusserver/Content/DE/02C29E96F798623EDDB7ADDA4C53C80C705455DE.cab to C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57\windows8-rt-kb2979577-x64.cab (full file).
DnldMgr BITS job {F801B6AB-04F3-4783-8E64-C5E816022C6A} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57\windows8-rt-kb2979577-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 969469, bytes transferred = 969469
DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
Handler Generating request for CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410 in sandbox C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
Handler Generating request for CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE in sandbox C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb2995387-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {4E0BFB47-4E72-418A-AB0E-8F342AE5DB56}
DnldMgr * Downloading from http://wsusserver/Content/A9/6CB3E80BD08277A99B0A11D90DD2081B34B82BA9.cab to C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75\windows8-rt-kb2995387-x64.cab (full file).
Report REPORT EVENT: {C61B89A2-C92F-45C0-9955-E07145849911} 2014-10-16 21:01:32:874-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {9DB84D85-ED5E-47EF-B397-16AD39A03D70} 2014-10-16 21:01:32:998-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {E0940842-C059-4B40-BE78-27E063853CB1} 2014-10-16 21:01:33:342-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {30E65A27-7451-48DE-839E-83CA4E1A6927} 2014-10-16 21:01:33:544-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {95C04AD5-642D-4002-9CB5-8B4231C46837} 2014-10-16 21:01:33:700-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 0 (null) Success Content Download Download succeeded.
Report CWERReporter finishing event handling. (00000000)
DnldMgr BITS job {4E0BFB47-4E72-418A-AB0E-8F342AE5DB56} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75\windows8-rt-kb2995387-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 20260063, bytes transferred = 20260063
DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
Handler Generating request for CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE in sandbox C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
Handler Generating request for CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74 in sandbox C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb3000061-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {E47CFB47-5B8F-4A37-B639-0C2386F033FA}
DnldMgr * Downloading from http://wsusserver/Content/2B/30A068C8F4A986FB1DA95E6C16A8376927D6332B.cab to C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432\windows8-rt-kb3000061-x64.cab (full file).
DnldMgr BITS job {E47CFB47-5B8F-4A37-B639-0C2386F033FA} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432\windows8-rt-kb3000061-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 2323339, bytes transferred = 2323339
DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
Handler Generating request for CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74 in sandbox C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
DnldMgr * All files for update were already downloaded and are valid.
DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
Handler Generating request for CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 in sandbox C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsStart
Handler Adding windows8-rt-kb3000988-x64.cab (entire file) to request list.
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
DnldMgr * BITS job initialized, JobId = {C51DECC8-58EF-45BA-A4E0-1849221356A6}
DnldMgr * Downloading from http://wsusserver/Content/1D/CA446010058397415CCD8CDC80C2B9F1AA04C11D.cab to C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e\windows8-rt-kb3000988-x64.cab (full file).
DnldMgr BITS job {C51DECC8-58EF-45BA-A4E0-1849221356A6} completed successfully
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e\windows8-rt-kb3000988-x64.cab with dwProvFlags 0x00000080:
Misc Microsoft signed: Yes
DnldMgr Download job bytes total = 9959275, bytes transferred = 9959275
DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
DnldMgr * Queueing update for download handler request generation.
DnldMgr Generating download request for update {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
Handler Generating request for CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 in sandbox C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e
Handler Selecting self-contained because update has express payload but server doesn't support it.
Handler Selected payload type is ptSelfContained
Handler Detected download state is dsHavePackage
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
DnldMgr * All files for update were already downloaded and are valid.
COMAPI >>-- RESUMED -- COMAPI: Download [ClientId = <NULL>]
COMAPI - Download call complete (succeeded = 8, succeeded with errors = 0, failed = 0, unaccounted = 0)
COMAPI ---------
COMAPI -- END -- COMAPI: Download [ClientId = <NULL>]
COMAPI -------------
COMAPI -------------
COMAPI -- START -- COMAPI: Install [ClientId = <NULL>]
COMAPI ---------
COMAPI - Allow source prompts: Yes; Forced: No; Force quiet: No; Attempt close apps if necessary: No
COMAPI - Updates in request: 8
COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
Agent Beginning install of conventional work item
COMAPI - Updates to install = 8
COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = <NULL>]
Agent *************
Agent ** START ** Agent: Installing updates [CallerId = ]
Agent *********
Agent * Updates to install = 8
Agent * Title = Security Update for Windows Server 2012 (KB2853587)
Agent * UpdateId = {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202
Agent * Bundles 1 updates:
Agent * {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
Agent * Title = Security Update for Windows Server 2012 (KB2923392)
Agent * UpdateId = {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201
Agent * Bundles 1 updates:
Agent * {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
Agent * Title = Security Update for Windows Server 2012 (KB2973501)
Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
Agent * Bundles 1 updates:
Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
Agent * UpdateId = {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202
Agent * Bundles 1 updates:
Agent * {5CFECF17-2661-4D81-9211-6B85CF760867}.202
Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
Agent * UpdateId = {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203
Agent * Bundles 1 updates:
Agent * {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
Agent * Title = Update for Windows Server 2012 (KB2995387)
Agent * UpdateId = {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200
Agent * Bundles 1 updates:
Agent * {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
Agent * Title = Security Update for Windows Server 2012 (KB3000061)
Agent * UpdateId = {DF82A201-7E54-420E-A08C-3281F731C3D7}.202
Agent * Bundles 1 updates:
Agent * {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
Agent * Title = Update for Windows Server 2012 (KB3000988)
Agent * UpdateId = {957ACF74-78FB-4045-91E5-A8714DD0915F}.200
Agent * Bundles 1 updates:
Agent * {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
Handler Attempting to create remote handler process as myuser in session 2
DnldMgr Preparing update for install, updateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202.
Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
Misc = Process: C:\Windows\system32\wuauclt.exe
Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE
Handler CBS session identity: 30402981_3864500492
Handler CBS package identity: Package_for_KB2853587~31bf3856ad364e35~amd64~~6.2.1.1
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\c21818e00e3275900ed08a1e2ff5db7f\windows8-rt-kb2853587-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\c21818e00e3275900ed08a1e2ff5db7f\inst
Handler Requesting post-reboot reporting for package Package_for_KB2853587~31bf3856ad364e35~amd64~~6.2.1.1.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6
Handler CBS session identity: 30402981_3878852909
Handler CBS package identity: Package_for_KB2923392~31bf3856ad364e35~amd64~~6.2.1.1
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\e5fa293e91f546a672ac78699659796b\windows8-rt-kb2923392-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\e5fa293e91f546a672ac78699659796b\inst
Report REPORT EVENT: {4E21F200-6A83-4346-804A-1A4F34A308DE} 2014-10-16 21:01:34:356-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {A506EF29-8D86-44D8-80A8-BD4C49FBD6D5} 2014-10-16 21:01:34:527-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {B24BAB44-6287-4C91-87B3-A1A3B135A5AE} 2014-10-16 21:01:34:855-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 0 (null) Success Content Download Download succeeded.
Report REPORT EVENT: {ABA9513E-9FDF-4195-9061-D886BAB2F448} 2014-10-16 21:01:37:476-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB2923392~31bf3856ad364e35~amd64~~6.2.1.1.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 041EDA5D-FF28-450B-AA8C-557161884100
Handler CBS session identity: 30402981_3898977768
Handler CBS package identity: Package_for_KB2973501~31bf3856ad364e35~amd64~~6.2.1.4
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\85932643c90c0498263f0303ff003e2d\windows8-rt-kb2973501-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\85932643c90c0498263f0303ff003e2d\inst
Report REPORT EVENT: {54547F34-7356-49A5-BE8F-384636863D8F} 2014-10-16 21:01:39:473-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB2973501~31bf3856ad364e35~amd64~~6.2.1.4.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 5CFECF17-2661-4D81-9211-6B85CF760867
Handler CBS session identity: 30402981_3996325907
Handler CBS package identity: Package_for_KB2978042~31bf3856ad364e35~amd64~~6.2.1.0
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\66f978e263d5de45076a28c052dd7777\windows8-rt-kb2978042-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\66f978e263d5de45076a28c052dd7777\inst
Handler Requesting post-reboot reporting for package Package_for_KB2978042~31bf3856ad364e35~amd64~~6.2.1.0.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410
Handler CBS session identity: 30402981_4035015583
Handler CBS package identity: Package_for_KB2979577~31bf3856ad364e35~amd64~~6.2.1.1
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\3e28b9501903e8c5723f4b8e55d15df8\windows8-rt-kb2979577-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\3e28b9501903e8c5723f4b8e55d15df8\inst
Report REPORT EVENT: {0EA6046F-846C-4C19-93EA-AB0E71B76F52} 2014-10-16 21:01:49:207-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 240005 (null) Success Content Install Installation pending.
Report REPORT EVENT: {E0203371-F1E3-4FE2-8D7A-7DED17BE48F1} 2014-10-16 21:01:53:092-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB2979577~31bf3856ad364e35~amd64~~6.2.1.1.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE
Handler CBS session identity: 30402981_4075265308
Handler CBS package identity: Package_for_KB2995387~31bf3856ad364e35~amd64~~6.2.1.2
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\5c380797af1ae165bf813d087411c52a\windows8-rt-kb2995387-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\5c380797af1ae165bf813d087411c52a\inst
Report REPORT EVENT: {3F463EB9-DA95-46B4-9FA0-AEA26AFE9AC7} 2014-10-16 21:01:57:101-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB2995387~31bf3856ad364e35~amd64~~6.2.1.2.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74
Handler CBS session identity: 30402981_4242192660
Handler CBS package identity: Package_for_KB3000061~31bf3856ad364e35~amd64~~6.2.1.2
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\792e73d5df6aed16fbb300b8eb82dd6e\windows8-rt-kb3000061-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\792e73d5df6aed16fbb300b8eb82dd6e\inst
Report REPORT EVENT: {2EBB3A05-7213-40EC-B38E-209493B8019D} 2014-10-16 21:02:13:810-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB3000061~31bf3856ad364e35~amd64~~6.2.1.2.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
DnldMgr Preparing update for install, updateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200.
Handler :::::::::::::
Handler :: START :: Handler: CBS Install
Handler :::::::::
Handler Starting install of CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908
Handler CBS session identity: 30402982_579441
Handler CBS package identity: Package_for_KB3000988~31bf3856ad364e35~amd64~~6.2.1.1
Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\a7c10dd1ff9315f43981eefa8c4fa1c7\windows8-rt-kb3000988-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\a7c10dd1ff9315f43981eefa8c4fa1c7\inst
Report REPORT EVENT: {1C3D36EC-A8EA-4D6A-9919-A3975E5AD2F4} 2014-10-16 21:02:19:130-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
Handler Requesting post-reboot reporting for package Package_for_KB3000988~31bf3856ad364e35~amd64~~6.2.1.1.
Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
Handler :::::::::
Handler :: END :: Handler: CBS Install
Handler :::::::::::::
AU Preventing expiration of polled reporting events until next restart
RebootNotify UpdateRebootRequiredNotification, set reboot grace timeout reg value SecurityUpdatesRebootRequiredNotificationTime to 2014-10-20 01:02:33
Agent *********
Agent ** END ** Agent: Installing updates [CallerId = ]
Agent *************
COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = <NULL>]
COMAPI - Install call complete (succeeded = 8, succeeded with errors = 0, failed = 0, unaccounted = 0)
COMAPI - Reboot required = Yes
COMAPI ---------
COMAPI -- END -- COMAPI: Install [ClientId = <NULL>]
COMAPI -------------
Report REPORT EVENT: {3080CEFC-A045-48BA-A639-1D323FE053B8} 2014-10-16 21:02:33:077-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 240005 (null) Success Content Install Installation pending.
Report CWERReporter finishing event handling. (00000000)
EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
PT WARNING: Cached cookie has expired or new PID is available
EP Got WSUS SimpleTargeting URL: "http://wsusserver"
PT Initializing simple targeting cookie, clientId = 5cb617c5-4bcc-44a6-a8bc-6f5d116a9dc3, target group = Systems, DNS name = rodcserver
PT Server URL = http://wsusserver/SimpleAuthWebService/SimpleAuth.asmx
EP Got WSUS Reporting URL: "http://wsusserver/ReportingWebService/ReportingWebService.asmx"
Report Uploading 18 events using cached cookie, reporting URL = http://wsusserver/ReportingWebService/ReportingWebService.asmx
Report Reporter successfully uploaded 18 events.
Shutdwn Checking to see whether install at shutdown is appropriate
Shutdwn user declined update at shutdown
AU AU initiates service shutdown
AU ########### AU: Uninitializing Automatic Updates ###########
WuTask Uninit WU Task Manager
Agent Sending shutdown notification to client
Report CWERReporter finishing event handling. (00000000)
Service *********
Service ** END ** Service: Service exit [Exit code = 0x240001]
Service *************
Justin Cervero - MS Enterprise Admin - Appalachian State University -
Getting error while preparing to send sharing message
I have seen many people post up about this same error, however I am going to share some details in the troubleshooting I have performed.
Environment: Exchange 2013. Cloud hosted. Internet connectivity using any number of clients. Mostly OWA, but a few Outlook 2010 and Outlook 2013.
1. User A with Outlook 2010 or Outlook 2013 right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User B in the Global Address List and click "Send." An error window pop-up states "Error while
preparing to send sharing message." User A is able to click on Calendar Permissions and add User B to the correct permissions. User A with OWA is able to right click on the calendar and click "Share Calendar" and it will send the message, no
errors.
2. User B with Outlook 2010 or Outlook 2013 on the same computer that User A was trying to do this from right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User A in the Global Address List and click "Send".
No errors and the message goes through fine. It works correctly with OWA as well.
I have seen people put up "autodiscover" and "permissions" or other things. This is obviously not a permission issue because the same thing that can be accomplished in OWA can't be accomplished in Outlook. It isn't an autodiscover issue
because the same thing that one person can accomplish on a computer/Outlook, another cannot. This is the same error that I have seen since the time of Outlook 2007 and have yet to see a valid solution.
Thanks,
DonHi Don,
Hope it is the solution:
You can't share your calendar in Outlook 2007
http://support.microsoft.com/kb/2836889
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Can't install Win 8 updates - Failure Configuring Windows
Win 8, 32bit
There is no way I can go through an update I keep getting a "failed "message after attempting installation. On reboot the comp hangs when trying to configure and I have to reboot which ultimately gives the message "failure configuring windows update, reverting
changes, do not turn off your computer. I also tried to install multiple updates manually and I get the same problem every single time.
My Win 8 install was an upgrade from Win7.
I'm really stuck and would appreciate your help.Arturo
ArturoHi,
Also you can try these tests:
1
Download and install the System Update Readiness tool: http://support.microsoft.com/kb/947821
2 Reset Windows Update components:
http://support.microsoft.com/kb/971058
Hope that helps.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support -
How to Configure Windows NT Mail on Alert Manager - System - Option
Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja. -
As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread. -
How do I get callback or windows messaging Events working on a 6534 card do pattern output?
Hi,
I am working on a fast track project and I am trying unsuccesfully to get my buffered output to work. I have 827 different size buffers of data that I need to output to a digital output. I need to wait until each buffer is output, then call some other functions before outputing the next buffer.
Although I only want to set one bit on and off I have i16 buffers that contains my data. I have based my program on the 6523SingleBufferedOutput NI-DAQ example. However I do not want to poll the number of buffer elements remaining, I want to use the NI-DAQ event message to tell my code when the DIG_Block_Out function is complete. This appears to be message type 2. I am basing the ev
ent code from another example in the Function Reference Manual. I have tried both a callback and an window message, but neither function is ever called. I am not sure if the problem is to do with the event configuration or the DO not completing. It does look like only part of my data is being output, however I tried with message type to send a message after n scans and it did not call my functions either.
I can send code to anyone who is willing to help. Help would be really be appreciated as I am behind now on my project,
Thanks,
DavidHere is the code
CImagePipeline::CImagePipeline(CGilbertDlg* pGilbertDlg, CSettings* pPrintSettings, CFloydFile* pDataFile) :
m_pGilbertDlg(pGilbertDlg), m_pPrintSettings(pPrintSettings), m_pImageFile(pDataFile), m_nPgTB(0), m_nReqInt(0),
iRetVal(0), iDevice(1), iGroup (1), iGroupSize (2), iPort (0), iDir (1)
, iPgConfig (1), iReqSource (0), iExtGate (0), iStartTrigON (1), iStartTrigOFF (0)
, iStartPol (0), iStopTrig (0), iStopPol (0), ulPtsAfterStopTrig (0), ulPattern (0)
, ulPatternMask (0), iResource (11), ulRemaining (1), ulAlignIndex (0), iIgnoreWarning (0)
, iYieldON (1), iDBModeON (1), iDBModeOFF(0), iOldDataStop(1), iPartialTransfer(0), lTimeout(180)
, m_nStatus(0), iStatus(0), ulCount(0), ulBufferSize(0)
CalculateTimebase();
Cleanup();
CleanupNIDAQEvents();
ReformatPipelineData();
m_nStatus = Configure();
iStatus = SetupNIDAQEvents();
if (iStatus != 0)
iRetVal = NIDAQErrorHandler(iStatus, "SetupNIDAQEvents",
iIgnoreWarning);
//##ModelId=3D496BB30271
CImagePipeline::~CImagePipeline()
CleanupNIDAQEvents();
Cleanup();
i16 CImagePipeline:etupNIDAQEvents()
// declare/initialize local variables
short iErr = 0,
iDevCode = 0,
iTimeBase = 0;
static short
ipBuffer[1000] = {0};
unsigned short
uSampInterval = 0;
unsigned long
ulCount = 1000;
char cpChanStr[5] = {0};
* INITIALIZE DAQ Device (optional)
iErr = Init_DA_Brds(iDevice, &iDevCode);
CHECK_RETURN_CONDITION(iErr);
* CONFIGURE DAQ Event
// setup channel string for DAQ Event
wsprintf(cpChanStr, "DOGRP%-d\0", iGroup);
// call Config_DAQ_Event_Message
iErr = Config_DAQ_Event_Message(iDevice,
(i16) 1, // add message
cpChanStr, // channel string
(i16) 1,// daq event type
(i32) 1,// DAQTrigVal0
(i32) 0,// DAQTrigVal1
(u32) 0,// trigSkipCount
(u32) 0,// preTrigScans
(u32) 0,// postTrigScans
m_pGilbertDlg->m_hWnd,// handle
(i16) WM_NIDAQ_MSG,// message
(u32) NULL);// callbackAddr
CHECK_RETURN_CONDITION(iErr);
iErr = Config_DAQ_Event_Message(iDevice,
(i16) 1, // add message
cpChanStr, // channel string
(i16) 2,// daq event type
(i32) 0,// DAQTrigVal0
(i32) 0,// DAQTrigVal1
(u32) 0,// trigSkipCount
(u32) 0,// preTrigScans
(u32) 0,// postTrigScans
NULL,// handle
(i16) NULL,// message
(u32) &mycallback);// callbackAddr
CHECK_RETURN_CONDITION(iErr);
return 0;
// FUNCTION: CleanupNIDAQEvents
// CHANGE THIS AS NECESSARY
void CImagePipeline::CleanupNIDAQEvents()
* Stop async operation
DAQ_Clear(iDevice);
* CLEAR all DAQ Events!
Config_DAQ_Event_Message(iDevice,
(i16) 0,
(i16) 2,
(i32) 0,
(i32) 0,
(u32) 0,
(u32) 0,
(u32) 0,
NULL,
(i16) NULL,
(u32) NULL);
void mycallback(short handle, short msg, unsigned short wParam, unsigned long lParam)
short doneFlag = (wParam & 0xFF00) >> 8;
if (doneFlag)
if (!SetEvent(CGilbertDlg::m_hTrackDone))
DWORD dwErrorCode = GetLastError();
void CImagePipeline::GenerateSingleTrackData(int trackNum)
static i16 piBuffer[400] = {0};
u32 ulCount = 200;
iStatus = NIDAQMakeBuffer(piBuffer, ulCount, WFM_DATA_I16);
if (iStatus == 0)
m_nStatus = Configure();
ulBufferSize = ulCount * 2;
iStatus = Align_DMA_Buffer(iDevice, iResource, piBuffer,
ulCount, ulBufferSize, &ulAlignIndex);
iRetVal = NIDAQErrorHandler(iStatus, "Align_DMA_Buffer",
iIgnoreWarning);
/* Start the pattern generation output of 100 "items" upon the
digital start trigger. */
iStatus = DIG_Block_Out(iDevice, iGroup, piBuffer, ulCount+1);
iRetVal = NIDAQErrorHandler(iStatus, "DIG_Block_Out",
iIgnoreWarning);
else {
AfxMessageBox(" The buffer was not made correctly. Check the parameters for NIDAQMakeBuffer.");
short CImagePipeline::Configure()
short status = 0;
iStatus = DIG_Grp_Config(iDevice, iGroup, iGroupSize, iPort,
iDir);
if (iStatus != 0)
iRetVal = NIDAQErrorHandler(iStatus, "DIG_Grp_Config",
iIgnoreWarning);
status = iStatus;
/* Configure internally timed pattern generation with timebase
m_nPgTB, interval m_nReqInt, and no external gating. */
iStatus = DIG_Block_PG_Config(iDevice, iGroup, iPgConfig,
iReqSource, m_nPgTB, m_nReqInt, iExtGate);
if (iStatus != 0)
iRetVal = NIDAQErrorHandler(iStatus, "DIG_Block_PG_Config",
iIgnoreWarning);
status = iStatus;
/* Configure for digital start trigger. */
iStatus = DIG_Trigger_Config(iDevice, iGroup, iStartTrigOFF,
iStartPol, iStopTrig, iStopPol, ulPtsAfterStopTrig, ulPattern,
ulPatternMask);
if (iStatus != 0)
iRetVal = NIDAQErrorHandler(iStatus, "DIG_Trigger_Config",
iIgnoreWarning);
status = iStatus;
return status;
int CImagePipeline::Cleanup()
/* CLEANUP - Don't check for errors on purpose. */
/* Set trigger mode to initial state. */
iStatus = DIG_Trigger_Config(iDevice, iGroup, iStartTrigOFF,
iStartPol, iStopTrig, iStopPol, ulPtsAfterStopTrig, ulPattern,
ulPatternMask);
/* Clear the block operation. */
iStatus = DIG_Block_Clear(iDevice, iGroup);
/* Unconfigure group. */
iStatus = DIG_Grp_Config(iDevice, iGroup, 0, 0, 0);
int numTracks = m_pImageFile->m_FileHeader.get_NumTracks();
for (int trackNum = 0; trackNum < numTracks; trackNum++)// loop through all tracks
if (m_vTrackData.size()>0)
if (m_vTrackData.at(trackNum))
delete m_vTrackData.at(trackNum);
return iStatus;
void CImagePipeline::CleanupNIDAQEvents()
* Stop async operation
DAQ_Clear(iDevice);
* CLEAR all DAQ Events!
Config_DAQ_Event_Message(iDevice,
(i16) 0,
(i16) 2,
(i32) 0,
(i32) 0,
(u32) 0,
(u32) 0,
(u32) 0,
NULL,
(i16) NULL,
(u32) NULL); -
Problem in configuring windows in FPM
Need Suggestions to configure windows with message types with FPM
Hi,
Reas this document u will have a nice idea about FPM.
[All abt FPM|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0a2b7c2-1598-2e10-45bc-c556df3b9576]
Karthik.R -
Windows Messaging+ App behind a proxy
What is the URL for the web service for the Windows Messaging+ app? Im behind a proxy and it always fails to connect. There is no option under settings for defining a proxy.
Verizon Wireless Customer Support wrote:
... Since the error is only happening at work, it sounds like something on your work's network that is causing this error. ...
Yes, Greg said
Other applications such as Spotify, Dropbox,
etc. work only when I configure them to use a specific proxy server. The
Message+ desktop application doesn't seem to allow the user to specify a
proxy server anywhere in the settings.
All he's asking is if the desktop app has an option to set for a proxy server or a way to workaround it....
Maybe you are looking for
-
How to override a method in an inner class of the super class
I have a rather horribly written class, which I need to adapt. I could simply do this if I could override a method in one of it's inner classes. My plan then was to extend the original class, and override the method in question. But here I am struggl
-
Can't execute net use with CF9
On our win 2003 dev server we cfexecute a batch file which in turn calls another batch file, CONNECT.COM which temporarily connects to each of our production servers so that we can copy new files over to production using BeyondCompare. This has been
-
Error occured in the source system
hi experts, can you plz how to resolve this error incorrect doc type ZSBB003 in the ALE defination of the source system. system response error when sending data to bi.
-
Hi All, Can any one let me know how to build fieldcat for ALV using OOPS. thanks. Khan
-
hi, in alv's using fuction modules how to add pushbuttons in application tool bar?