PREPAYMENT

Dear MM consultants,
I need to pay to vendor before goods receipt.
For this purpose i selected prepayment option A or C  in Vendor master ( Payment transaction )
I craeted a PO and try to do MIRO
System thros error as No PO suitable item foud, also i am not able to see prepayment field in header screen.
Request ur help
Thanks
A.Gururajan

hi
Follow the below mentioned steps for Advance Payment against the PO / Contract;
1. F-47 - Create Down Payment Request (Here in selection screen specify all the necessary details (Doc Type - KA) and press enter, on this screen specify amount to be paid in advance and also specify the PO Document and line item and SAVE)
2. F-48 - Down Payment Entry w.r.t. Down Payment Request No
3. F-54 - Down Payment Clearing
At the time of MIRO, it will pop-up that advance payment is done to this vendor against this PO.
Also take help of your FI Consultant if required.
Note: - Prerequisite for Advance Payment: - Go to FS00, and check Filed Status Group for Vendor Reconciliation Account, then go to OBC4, check the Filed Status Group, what you have maintained for the Vendor reconciliation account. Here go To Material management segment and put optional entry for the field of Purchase Order and save.
When payment is done then it passes following entry;
Vendor Account - Dr
Bank Account - Cr
And at the time of IR, it will pass following entry;
Vendor Account - Cr
GR/IR Clearing A/c - Dr
So now the difference remained in Vendor Account (Check in FBL1N) after these 2 transactions should be payed extra or to be charged back to Vendor, you have to decide manually and accordingly raise Credit Memo to Vendor and adjust the payment.
hope it clears
regards
kunal

Similar Messages

  • To get the invoice number of amount applied in view prepayment applications

    hi all
    In AP abc Manager-Invoices--when we give invoice number in the invoice number field we get to see supplier name etc in the same Invoices Form there is a
    tab called General from which we can get Amount Paid ,
    Similarly there is a tab called View Prepayment Applications ,when clicked on this tab we can see Amount Applied and invoice number corresponding to that amount applied
    KIndly help me from which table or view this invoice number can be obtained
    i got amount applied from the view AP_UNAPPLY_PREPAYS_V,but i cant find the invoice number.
    kindly guide
    thanking in advance
    Edited by: makdutakdu on Dec 19, 2011 11:29 AM

    Thanks Robin,
    i was able to get a work around for this. For the time being i am using the following code snippet, i will try using the one u sent an will see if this works too.
    // create nodeinfo object for the node that table will bind to
    final IWDNodeInfo nodeinfo = wdThis.wdGetContext().node<NODENAME>().getNodeInfo() ;
    //get the structure of the node
    final IStructure struct = nodeinfo.getStructureType() ;
    Iterator iter = nodeinfo.iterateAttributes() ;
    if (null != struct)
    totalFields = struct.getNumberOfFields();
    else
    for ( Iterator i = nodeinfo.iterateAttributes(); i.hasNext(); i.next() )
              totalFields++;
    for(count = 1; count <= totalFields; count++)
         fieldName = nodeinfo.getStructureType().getField(count).getName();

  • How to import the 'PREPAYMENT' type invoices in R11i

    Hi,
    We are on 11.5.10.2, Patch Set Level AP.O
    I am looking for an automated solution to import the AP Invoices of type 'PREPAYMENT'. The process throws up an error saying that the invoice type is not valid, even though 'PREPAYMENT' is in the Invoice Type Lookup.
    Couple of solution pointers were advising to build a customization, by taking the code of AP INVOICE IMPORT and other related programs, but the effort to develop and maintain the customization is not worth the business need, as there will be only 20 - 30 Prepayments every month and business users can create them manually. Thus we would like to explore the option using the standard interface to import prepayments in 11i.
    According to the following note, it is not possible to import prepayment invoices in 11i:
    Note 430493.1 - Unable To Import Prepayment Type Invoices.
    But if we are importing a standard invoice and if we have available prepayment to that supplier, then we will be able to apply it in import process (
    Note 1280716.1 - How To Apply a Prepayment to an Invoice During Payables Open Interface Import)
    Note that the feature has been implemented in R12 (see Note 460572.1)
    Thanks,
    Jayaram.

    Hi
    I have had the same issue in the past and resolved it using a customisation.
    It is a tiny customisation, in the standard program, the invoice types for standard invoice and credit memo are hardcoded. All you need to do is add 'PREPAYMENT' to this list and the custom version will work (assuming you take a copy of the standard as your starting point)
    Regards

  • Need interface tables in payables for  invoices of type prepayment

    hi all i am doing conversion in payables for invoices of type prepayments
    the table which i am using are
    AP_INVOICES_INTERFACE
    AP_INVOICE_LINES_INTERFACE
    can any one help me by giving correct interface tables

    Hi,
    As far as I know, you can't import prepayments through AP Open Interface: it only supports importing invoice types 'STANDARD' and 'CREDIT'. One alternative would be importing them as standard invoices and, after loading them into AP, change invoice_type_lookup_code to PREPAYMENT.
    Hope it helps,
    Ketter Ohnes

  • Vendor Master- Prepayment field on Payment Transaction Accounting

    This field under Invoice verification tab has 4 options- one of which is - leave blank/ space and this will prevent the system from posting Prepayment against this vendor.
    I have left this field blank yet I can post Down payment against this vendor using F-47 and F-48- what am I missing? Does the term Prepayment term means something dofferent than Down payment?
    Need help to understand this
    Thanks
    Raj

    hey
    u have to set vendor pay ment block thru fk02 for vendor and company code combivnation.
    there is a subscreen called automatic payment transaction in which there is payment block option is there u have to select that
    there are blocking keys are there wich can be controlled by OB27 keys are having description like..
    eg ..free for payment, skip for accountm,lock for payment,payment request etc.
    please chk that in yours case.
    KAustubh

  • Multiple Prepayment for a single Assignment or specific Assignment Set

    Hi Everyone
    I am working in Payroll Department, and I had a difficulties of running more than one prepayment for the same. We need sometime to pay for an employee a specific element like "Official Assignment Compensation" before the end of the month and we use Quick-pay by select specific element. then I use Prepayment. In the end of the Month, when I do run to the remaining elements it had no problem. but when I do re-prepayment it return to the first prepayment the quick-pay run not the payroll run.
    I appreciate if anyone can explain how to do more than one prepayment for a single employee in a single period.

    Thanks alot ysaadeh
    I did managed to do it by doing the following steps:
    - Quick Pay for a single employee
    - Pre-Payment for this Quick Pay
    - Bank Transfer Report - which shows the Employee No, Employee Name, Employee Bank Name and Ban Account Numbers and Amount for the Quick Pay
    Then
    - Payroll Run @ the end of the Month
    - Pre-Payment for Payroll Run
    - Bank Transfer Report ..
    It worked fine. But I notice one thing. When I do pre-payment for Payroll - the second pre-payment, Bank Transfer Report only take the Data from the last Pre-Payment.
    I cannot do the Bank Report for the Quick Pay After Running the Payroll Pre-Payment ..
    Is there some way I can use Bank Report for these Both Pre-Payment
    and Is there a way I can use Quick-Pay for a set of Employees - An assignment Set .
    Thanks again and appreciate you feedback.
    Regards

  • Creative Cloud prepay

    I am currently paying monthly for Adobe Creative Cloud. As a student with financial instability, I hate monthly payments, and I was thrilled to see that there is now a prepay option. The only problem is that it is a limited offer. My Creative Cloud Subscription ends in about a month and I want to take the prepay option. I am just worried that the prepay option will be gone when the time for my renewal comes around. Am I able to purchase Creative Cloud with the prepay option now, and then have that membership activate when my current subscription runs out?

    Your present CC ends on June 22nd 2014, the offer that you have mentioned is limited time offer(As you have mentioned it)(Membership plans: Pricing and subscriptions | Adobe Creative Cloud)
    The best option would be buy the limited time offer now & cancel the present subscription.You can use the present subscription till June 22nd.Then you just need to sign out & sign back in of the CC Desktop app to activate the new yearly CC.
    Regards
    Rajshree

  • Automatic clearing of a vendor prepayment

    Hi,
    I am trying to do the following :
    - post a PO
    - post a GR
    - post a down payment or prepayment
    - get it paid through F110
    - post MIRO
    - pay remainder of the invoice through F110
    I found 2 ways of working :
    1) through down payment request process.  BUT this is not what I am looking for as there is no automatic clearing between final invoice and down payment.  This has to be cleared manually.
    2) In Logistics Invoice verification, there is a possibility to use a "prepayment".  This involves a few customizing settings in LIV under "prepayment", and has to be also configured on the vendor master record.  This way of working produces an invoice, related to the original PO, but with no link to the PO items.  When posting this invoice (transaction MIRA), the prepayment document should be automatically created ...  Unfortunately, I do not succeed in getting this prepayment working !!!!
    Does anyone know about this ?
    Or any other idea if using another process ?  Billing plan possibility ?
    Many thanks !
    Danielle

    Use t.code for F-44 for clearing openitems..There you can  enter PO at line item level
    u can give PO as reference to process Invoice which is gateway for Payment
    Regards

  • Journal Creation for Prepayment PO

    Hi,
    We have the below requirement in 11i:
    We create a accrual PO for one year for rent ( eg - PO for a rent of Rs.12000 for the period Apr 2010- Apr 2011 ). Every month we run reports to fetch details about 'Partially paid' and 'Fully Unpaid' POs , extract the data to an excel sheet. We create Prepayment POs after analysing these reports. Considering the above example, I would now create a prepayment PO for Rs.9000 as we have paid 3 months rent. Then we track the information on an excel again and use WEB ADI to create Journals.Is there a way to automatically create journals from the prepayment POs created?
    Please let me know if you need more information.
    thanks.
    S.Sriram

    Hi ,
    TR split can happen if the delivery date and shipping point for the item is different from other item. Generally used splitting criteria's are...
    i) VLTYP - storage type
    ii) VLPLA - source bin
    iii) VLBER - storage Section
    Hence please maintain different criteria as mentioned above and TR split can happen. Thanking you.

  • Prepayment request and final invoice

    Can anyone help with a question about posting payments to a prepayment request and then reconciling the final invoice. We create a sales order and then a prepayment request for 100% of the sales order. The customer then pays for the goods. We put in the payment under the incoming payment screen against the prepayment invoice. This then closes the prepayment request.
    We then ship the goods to the customer creating a delivery note from the sales order. Then we create a final invoice for the customer. All OK so far I think. Then the help page tells me to go again to the incoming payment screen, select the business partner and then select the prepayment invoice and the final invoice and all will be OK. BUT we cannot add the incoming payment because we get a message " Confirmation amount must be > zero".
    What are we doing wrong. We have tried to do a standard reconciliation in the banking module, but this leaves a double posting amount in the VAT account.

    By Pre Payment I believe you are referring to Down Payment Invoice.  After you have processed an Incoming Payment for the Downpayment invoice there is no need to go to the Incoming Payment again to reconcile the downpayment.
    You would link the downpayment from the AR Invoice itself.  Please read this document https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000738282007E
    Suda

  • How to clear Prepayment  account in the subledger

    A prepayment amount of 1000 was paid to a supplier for the last month of the service contract using the profoma invioce. When the invoice for the last month was received it was 800. Now we have over paid the supplier by 200. when the refund is received, how do I clear the subledger with the difference?
    Please assist

    This is what I found in Oracle documentation-
    To record a prepayment refund:
    1.     In the Invoices window, enter an invoice in the amount of the refund from the supplier. Enter Standard for the type. Enter a description on the invoice to indicate that you are retiring a prepayment. Create an invoice distribution for the amount of the refund and debit your Cash account or an accounts receivable account. Credit the accounts payable liability account as always.
    Approve the invoice.
    2.     Choose the Actions button to navigate to the Invoice Actions window. Select the Apply/Unapply Prepayment check box and choose OK.
    Select the prepayment to which you want to apply the refund. Enter the refund amount in the Amount To Apply field. Optionally change the GL Date, which is the accounting date for the reversing prepayment distributions that Payables creates when you apply a prepayment. If you want to see more information on a prepayment, select it and choose the Invoice Overview button.
    If you want to approve the new prepayment distributions that the application will create and the Allow Online Approval Payables option is enabled, select Approve. If the Allow Online Approval Payables option is not enabled, you can submit Payables Approval from the Submit Request window.
    If you want to print a Prepayment Remittance Advice for the supplier, select Print.
    3.     Choose the Apply/Unapply button to apply the prepayment amount to the invoice you entered for the refund and to save your work.
    This fully retires the prepayment and reduces the amount remaining on the invoice to 0. Payables automatically enters a reversing distribution on the prepayment to credit the prepayment account. This credit balances the debit you entered on the invoice (Step 1) to the Cash account.

  • INVOICE에 PREPAYMENT를 APPLY한 후의 DATA FLOW

    제품 : FIN_AP
    작성날짜 : 2004-05-19
    INVOICE에 PREPAYMENT를 APPLY한 후의 DATA FLOW
    ========================================
    PURPOSE
    Invoice에 Prepayment를 Apply한 후의 Data변화에 대해서
    간략하게 설명합니다.
    Explanation
    승인 및 Accounting처리가 끝난 Invoice에 대해서 Prepayment를 Apply하게되면,
    승인상태는 "Need reapproval"이고, Accounted상태는 "Partial"로 바뀌게 됩니다.
    그 후에 Approve작업 및 Accounting작업을 하면,
    다시 "Approved"와 "Yes"로 바뀌게 되고, 그 후에 Prepayment unapply하게되면,
    다시 상태는 "Need Reapproval"과 "Partial"로 바뀝니다.
    Table level에서는 Accounting전까지는 송장 Main table, 즉,
    AP_INVOICES_ALL, AP_INVOICE_DISTRIBUTIONS_ALL, AP_PAYMENT_SCHEDULES_ALL 등의
    특정 column값들만 변하게 되고, Accounting생성작업이 실행되면,
    Event와 AP_AE_HEADERS_ALL, AP_AE_LINES_ALL table등에 각각의 Event data가
    발생하게 됩니다.
    즉, Invoice, Prepayment Apply, Prepayment unapply 등과 같은 Event data가 발생합니다.

  • Prepayment invoice matched to PO going on receiving hold

    Hi everybody,
    I want to know why a prepayment invoice will go on a receiving hold in oracle AP when matched to an unreceived PO. Outside of manually releasing the hold and making the payment is there some other set up that allows ONLY prepayment invoices not to go on a receiving hold whether they have been received or not. (This is in 11i)
    All responses highly appreciated!
    Thanks!!

    Hi ,
    Kindly check the option in the Invoice tab for this particular supplier site..the match option would have been set to Receipt ..Change this to PO and no 2 uncheck the option hold unmatched Invoice.
    Hope this will resolve your issue.
    Regards,
    Ramaa

  • Does anyone know if I can use verizon on a phone that used to be active on walmart's straight talk plan? I would like to use verizon prepay service.

    Does anyone know if I can use verizon prepay service on a phone that used to be on walmart's straight talk plan? It is not active at all right now.

    Prepaid Bring Your Own Device (BYOD) Program FAQs | Verizon Wireless
    Specifically #5.
    Set Your Location

  • How to get Prepayment in Oracle Payable R12

    HI 2 ALL
    Anybodyknow that how to fetch applied prepayment in oracle payable r12.
    My actual requirement is to get following information
    PO# CHECK# PRE-PAYMENT DATE
    Regards ,
    Zulqarnain

    plz see Re: AP Prepayments

Maybe you are looking for