Prepend a 1 to a number in CID

When I want to call a long distance number back that is in the Caller ID list, it always says I must dial a '1' first. Is there a way, I can set the phone up to always prepend a '1' to the number. Our cell phones do this with no problem.
Thanks,
Bemax

Bemax wrote:
When I want to call a long distance number back that is in the Caller ID list, it always says I must dial a '1' first. Is there a way, I can set the phone up to always prepend a '1' to the number. Our cell phones do this with no problem.
Thanks,
Bemax
I really like your idea. What is the point of the redial or return call feature if it always tells you to dial 1 first? The system would need to know if the number was long distance from your local exchange. Not all customers have unlimited long distance on their voice plan. I believe most cell systems are now nationwide.
Add your idea here, and have people vote for it.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/idb-p/ideas.

Similar Messages

Support for Skype Number Calling ID Australia

Hi there
So I was wondering if there will be any support for skype number calling id in the future in australia. It is quite frustrating not having any support for ksype calling id in australia. Was wondering when support will become availible. I'm sure many of you are also feeling my pain. You pay enough for the number so you should be able to have the number as the out going caller id.
Thanks.

When will we be able to use the Skype supplied number for CID (Caller ID) in Australia?
I've been trying to get a straight answer for this for over 3 years. The closest I had was that the system can only verify the owner of a number by sending an SMS to it. Well, if Skype supplies the number in the first place they already have me validated!
Given that a mobile number can be used in Australia already why can't the Skype number be put into place?
Can a moderator or support staff please comment here?
Thank you. Daymo.

Number for skype support

I need a phone number for skype customer support.

When will we be able to use the Skype supplied number for CID (Caller ID) in Australia?
I've been trying to get a straight answer for this for over 3 years. The closest I had was that the system can only verify the owner of a number by sending an SMS to it. Well, if Skype supplies the number in the first place they already have me validated!
Given that a mobile number can be used in Australia already why can't the Skype number be put into place?
Can a moderator or support staff please comment here?
Thank you. Daymo.

Error while executing the procedure

Hi,
I tried the following example it's compiled but while executing giving the errors
create or replace PROCEDURE createRZGSet (
        rNm IN VARCHAR2,
        rDsc IN VARCHAR2,
        rId OUT NUMBER
    ) IS
        cId INTEGER;
    BEGIN
        cId := 1;
        SELECT q_id.NEXTVAL
          INTO rId
          FROM DUAL;
        INSERT INTO t_set (rid,
r_nm,
r_dsc,
o_id,
flag)        VALUES (rId,rNm,rDsc,cid,'P');
    END;
/The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /
execute createRZGSet('myp','miyapur',optval);
ERROR at line 4:
ORA-06550: line 4, column 10:
PLS-00103: Encountered the symbol "CREATERZGSet" when expecting one
of the following:
:= . ( @ % ; immediate
The symbol ":=" was substituted for "CREATERZGSet" to continue.could you please hint me in this error..
thanx

The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /remove the execute key word. it belongs to SQL Plus. in pl/sql you can just give the procedure name thats enought.
SQL> declare
2   optval number;
3 begin
4   createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /

SELECT Fails for a WITHIN clause if the xml element have a DASH

I am using a context index on a CLOB Column and one of my records is like this.
?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cid-spf xmlns="java:com.verid.ident">
<tran-id>1020022445889</tran-id>
<tran-time>1187984936000</tran-time>
<mode>3</mode>
<spoofer>
<name/>
<ph>
<number>12106337000</number>
</ph>
</spoofer>
<spfd>
<name/>
<ph>
<number>13173708869</number>
</ph>
</spfd>
<st-time>1187984936000</st-time>
<dest-number>12106878012</dest-number>
</cid-spf>
When I run a query
SELECT * FROM identity_event
WHERE contains (identityeventdata,'1187812924000 WITHIN ST-TIME')>0
All my other xml elements works just fine.
I get this error.
[1]: (Error): ORA-12801: error signaled in parallel query server P003, instance maralpinor03.trogdor.com:maralpin3 (3) ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: Oracle Text error: DRG-50901: text query parser syntax error on line 1, column 24

The dash or hyphen (-) has special meaning to Oracle text. It means MINUS. Any time that you want Oracle Text to treat such a special character as regular text, you need to escape it, either by putting a backslash (\) in front of each special character or by enclosing a whole word or phrase within curly brackets ({}). Please see the demonstration below.
SCOTT@10gXE> CREATE TABLE identity_event
2    (identityeventdata CLOB)
3 /
Table created.
SCOTT@10gXE> INSERT INTO identity_event VALUES
2 ('<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
3 <cid-spf xmlns="java:com.verid.ident">
4 <tran-id>1020022445889</tran-id>
5 <tran-time>1187984936000</tran-time>
6 <mode>3</mode>
7 <spoofer>
8 <name/>
9 <ph>
10 <number>12106337000</number>
11 </ph>
12 </spoofer>
13 <spfd>
14 <name/>
15 <ph>
16 <number>13173708869</number>
17 </ph>
18 </spfd>
19 <st-time>1187984936000</st-time>
20 <dest-number>12106878012</dest-number>
21 </cid-spf>')
22 /
1 row created.
SCOTT@10gXE> CREATE INDEX your_index ON identity_event (identityeventdata)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4    ('FILTER        CTXSYS.NULL_FILTER
5       SECTION GROUP CTXSYS.AUTO_SECTION_GROUP')
6 /
Index created.
SCOTT@10gXE> -- wrong:
SCOTT@10gXE> SELECT * FROM identity_event
2 WHERE contains (identityeventdata,'1187812924000 WITHIN ST-TIME')>0
3 /
SELECT * FROM identity_event
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-20000: Oracle Text error:
DRG-50901: text query parser syntax error on line 1, column 24
SCOTT@10gXE> -- correct:
SCOTT@10gXE> SELECT * FROM identity_event
2 WHERE contains (identityeventdata,'1187984936000 WITHIN {ST-TIME}')>0
3 /
IDENTITYEVENTDATA
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cid-spf xmlns="java:com.verid.ident">
<tran-id>1020022445889</tran-id>
<tran-time>1187984936000</tran-time>
<mode>3</mode>
<spoofer>
<name/>
<ph>
<number>12106337000</number>
</ph>
</spoofer>
<spfd>
<name/>
<ph>
<number>13173708869</number>
</ph>
</spfd>
<st-time>1187984936000</st-time>
<dest-number>12106878012</dest-number>
</cid-spf>
SCOTT@10gXE> SELECT * FROM identity_event
2 WHERE contains (identityeventdata,'1187984936000 WITHIN ST\-TIME')>0
3 /
IDENTITYEVENTDATA
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cid-spf xmlns="java:com.verid.ident">
<tran-id>1020022445889</tran-id>
<tran-time>1187984936000</tran-time>
<mode>3</mode>
<spoofer>
<name/>
<ph>
<number>12106337000</number>
</ph>
</spoofer>
<spfd>
<name/>
<ph>
<number>13173708869</number>
</ph>
</spfd>
<st-time>1187984936000</st-time>
<dest-number>12106878012</dest-number>
</cid-spf>
SCOTT@10gXE>

O/R mapping and datastore identity

Hi all,
we are currently trying to map an existing database schema to JDO. We have
not been able to map "correctly" to the existing schema in two
different cases. Any input that you may have to us on this is highly
appreciated.
Inheritance with indicators
In one part of the model, we use a single character indicator to
distinguish between which concrete class is to be instantiated. We
thus have a table A with columns:
type varchar2(1)
id number(10)
Other tables relate to this table. Some tables can only relate to some
types. To ensure that the relational model
expresses the correct constraints about which objects can relate to
one another, all our foreign keys include both the type and the
id. Still, the id is taken from a sequence and should be considered
datastore identity.
When mapping this to Kodo JDO, we cannot make (type,id) the primary
key and have datastore identity. We have had to compromise and use
just the id as the primary key (which is in fact unique "by
convention"). This in turn means that we cannot use (type,id) as the
reference from other tables (e.g. B), since a lookup from A to B then
includes the A table in the SQL fired just to get the correct type.
Are we missing something here? I would assume that this would be a
normal problem if using datastore identity and flat inheritance
mapping. And in fact, Kodo must know the value of the type for any A
object, since it has the instance and can simply relate the class to
the type through the metadata (however, this only partly solves the
problem). Is there a workaround we can use? Can we extend the primary
key/reference support to support this ourselves?
Sub-objects
In another part of our model, we have a table C where each record can
have a number of records in a table D:
C:
id number(10)
D:
id number(10)
Cid number(10) (references C.id)
In the database, the primary key for D is (id, Cid). id is drawn from
a sequence and is thus unique "by convention". Other tables relate to
D through (id, Cid), thus we will need a unique index on this.
Again, we have had to make id the primary key of D and let all
relations to it only join on the id field when doing the mapping.
We are reluctant to introduce new indexes in the database since this
will be harmful to our import performance.
Is there a workaround for this, or are we simply not doing this
correctly??

Inheritance with indicators
---------------------------If the type column is part of the primary key, I would suggest using application
identity. You can use extensions like sequence-assigned to still have the id
value auto-assigned.
Sub-objects
-----------Again, I would use application identity.

Is list partition and hash partition one and the same

I am creating table with partition with the commands
CREATE TABLE ABD (ENO NUMBER(5),CID NUMBER(3),ENAME VARCHAR2(10))
PARTITION BY LIST (ENO)
(PARTITION P1 VALUES (123),
PARTITION P2 VALUES (143),
PARTITION CLIENT_ID VALUES (746))
ALTER TABLE ABD
ADD PARTITION CLIENT_756 VALUES (756)
but when i describe the table script it is showing like this
CREATE TABLE ABD (
ENO NUMBER (5),
ENAME VARCHAR2 (10),
CID NUMBER (3) )
PARTITION BY HASH (ENO)
PARTITIONS 4
STORE IN ( USERS,USERS,USERS,
USERS);
actually i am creating list partition but it is showing hash partition why is it so?

when i describe the table script it is showing like thisHow do you describe it, and which version are you on ?
TEST@db102 SQL> CREATE TABLE ABD (ENO NUMBER(5),CID NUMBER(3),ENAME VARCHAR2(10))
2 PARTITION BY LIST (ENO)
3 (PARTITION P1 VALUES (123),
4 PARTITION P2 VALUES (143),
5* PARTITION CLIENT_ID VALUES (746))
TEST@db102 SQL> /
Table created.
TEST@db102 SQL> ALTER TABLE ABD
2* ADD PARTITION CLIENT_756 VALUES (756)
TEST@db102 SQL> /
Table altered.
TEST@db102 SQL> select dbms_metadata.get_ddl('TABLE','ABD','TEST') from dual;
DBMS_METADATA.GET_DDL('TABLE','ABD','TEST')
CREATE TABLE "TEST"."ABD"
   (    "ENO" NUMBER(5,0),
        "CID" NUMBER(3,0),
        "ENAME" VARCHAR2(10)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
PARTITION BY LIST ("ENO")
(PARTITION "P1" VALUES (123)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" NOCOMPRESS ,
PARTITION "P2" VALUES (143)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" NOCOMPRESS ,
PARTITION "CLIENT_ID" VALUES (746)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" NOCOMPRESS ,
PARTITION "CLIENT_756" VALUES (756)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" NOCOMPRESS )
TEST@db102 SQL>

Got my BlackBerry Pearl bluetooth*ed* to my computer for internet usage!

entered in some settings and now i have wireless internet everywhere I go!

1. Go back to the link I provided previously and download the Modem Script for the BlackBerry 8100, It will download as a txt. file. Once you download it delete the file extension and move in into modem scripts in your library.
2. Make sure your BB is paired with your computer. You will have to go open up bluetooth preferences and either setup, or configure your existing settings for your BB. When you run the setup wizard again it will ask you if you want to use the modem services for the phone. Select the GPRS setting. On the next screen it will ask you to find the modem script for it locate the modem script, which is what you downloaded in step 1.
3. On the BB go to option/advanced options/tcp/ and under the APN settings enter "wap.voicestream.com" leave username and password blank.
4. Open up dial-up the networking preference on the mac. Make sure you have selected to configure the bluetooth network. under the PPP tab enter "guest" for username and password. For Dial Up Number or CID string (same box) enter "wap.voicestream.com". make sure the bluetooth is turned on both the computer and phone.
5. Open up the Internet connect app on the mac and connect.
I hope i didn't miss anything.
Hope this helps.

How to tell Oracle to use spindles efficiently?

I am creating an Oracle database on a server that has multiple disks and is running a RAID set. How do I tell Oracle to use all the disk spindles efficently by striping the data across all disks on the server?
Thank you!

I'm not using 8.0.5 anymore; I'm using 8.1.7, so I can't test
any theories on what will work in 8.0.5, but I believe I
remember that the "PRAGMA RESTRICT_REFERENCES (WNDS);" was only
required for packaged functions. Can you compile your function
all by itself, outside of the package, and just call it from
some procedure within the package? I think that would eliminate
the conflict between WNDS and DBMS_SQL.PARSE. I did a little
testing and the following seemed to work:
CREATE OR REPLACE FUNCTION GetMaxNum
(nTable IN VARCHAR2,
   year   IN NUMBER)
RETURN     NUMBER
IS
cid        INTEGER;
rows       INTEGER;
n          NUMBER (6);
BEGIN
cid := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE (cid,
      'SELECT    MAX (numero)'
|| ' FROM ' || nTable
|| ' WHERE     TO_NUMBER(TO_CHAR(date_,''YYYY''))='
              || year,
DBMS_SQL.NATIVE);
DBMS_SQL.DEFINE_COLUMN (cid, 1, n);
rows := DBMS_SQL.EXECUTE_AND_FETCH (cid, FALSE);
IF rows > 0
THEN
    DBMS_SQL.COLUMN_VALUE (cid, 1, n);
ELSE
    n := 0;
END IF;
DBMS_SQL.CLOSE_CURSOR (cid);
RETURN n;
EXCEPTION
WHEN OTHERS THEN
    DBMS_SQL.CLOSE_CURSOR (cid);
RAISE;
END GetMaxNum;
CREATE OR REPLACE PACKAGE GetMaxNumber_pkg
AS
PROCEDURE GetMaxNumber
    (nTable IN VARCHAR2,
     year   IN NUMBER);
END GetMaxNumber_pkg;
CREATE OR REPLACE PACKAGE BODY GetMaxNumber_pkg
AS
PROCEDURE GetMaxNumber
    (nTable IN VARCHAR2,
     year   IN NUMBER)
IS
    n          NUMBER (6);
BEGIN
    SELECT GetMaxNum (nTable, year)
    INTO   n
    FROM   dual;
END GetMaxNumber;
END GetMaxNumber_pkg;

Can't "prepend" a phone number from a text, document or website?

When the Pre recognizes a phone number in a text message, e-mail, document or website, it allows you to click on the number to call it. Great so far. Unfortunately, once you do so, and completely arbitrarily, the phone won't let you make any edits of any kind to the phone number except to add or delete from the end of the number. Every phone I've ever had has allowed me to "prepend" a number (to, for example, add an area code). More to the point, there is simply no good reason for the Pre to prevent me from making whatever edits I want to the number. I should be fully able to hold down the orange key and move the cursor anywhere that I want within the number and then make edits, just like I can when I enter a number manually. Unfortunately, for no apparent good reason, the phone allows no edits of any sort to any number I've clicked on from another source.
Can anybody suggest a workaround, or do is this just one of those bizarre "what were they thinking" type things I have to live with?
Post relates to: Pre p100eww (Sprint)

Yeah, and I can also copy and paste the number instead of just clicking on it, but both solutions completely and entirely defeat the whole purpose and convenience of being able to simply click on a number in another source to dial it. I don't want to have to add numbers I'm going to be calling only once to contacts just to make small changes before I dial them, and then have to delete them from contacts when I'm done. There is a reason that users can simply click on phone numbers in documents and texts to dial them, and that is convenience. Not being able to make simple edits kills off some of that convenience. Workarounds like adding to contacts or cutting and pasting kill almost all of it.

CUCM 8.6 Call Forwarding to External Number Issue

Hello,
Call forwarding worked without problems, we could forward our phones to external numbers and everything was ok, when somebody called to my phone, I could got the call to my cell phone.
But now when I forward my phone to external number and try to call to my phone I get busy trigger.
We didn't change configuration or install any update.
I think its my ISP-s problem, to whom we have SIP Trunk.
I don't understand log file, so can you tell what is the problem?
Here is log:
057729XXXX is called party, cell phone number
original calling party number is 240XXXXX, but it is forwarded to 2484XXX
INVITE sip:2484XXX@ISP-IP:5060 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
From: <sip:057729XXXX@MY-CUCM>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 0383266432-0000065536-0000191815-2219117834
Session-Expires: 1800
P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
Contact: <sip:057729XXXX@MY-CUCM-IP:5060>
Max-Forwards: 68
Content-Type: application/sdp
Content-Length: 215
v=0
o=CiscoSystemsCCM-SIP 4052091 1 IN IP4 MY-CUCM-IP
s=SIP Call
c=IN IP4 MY-CUCM-IP
t=0 0
m=audio 29790 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
|2,100,56,1.173711429^MY-CUCM-IP^MTP_3
17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 2|2,100,56,1.173711429^MY-CUCM-IP^MTP_3
17:34:18.526 |EnvProcessUdpHandler::fireSignal - SEND: index = 2, handler = 0xb2d59c98|*^*^*
17:34:18.526 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP-IP:5060|*^*^*
17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1172, ISP-IP:5060)|*^*^*
17:34:18.536 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
17:34:18.536 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
17:34:18.536 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 358 from ISP-IP:[5060]:
[12623361,NET]
SIP/2.0 100 Trying
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
Server: CISCO-SBC/2.x
Content-Length: 0
|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/ccsip_spi_get_msg_type returned: 2 for event 1|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Transport/0x0/context=(nil)|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Transport/0x0/gConnTab=0xf484290, addr=ISP-IP, port=5060, connid=2, transport=UDP|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/Return existing connection for port 5060 connId 2|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/Checking Invite Dialog|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0xb1b50c90/INVITE response with no RSEQ - disable IS_REL1XX|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_TRYING value=500 retries=3|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/States/0xb1b50c90/0xb1b50c90 : State change from (STATE_SENT_INVITE, SUBSTATE_NONE) to (STATE_RECD_PROCEEDING, SUBSTATE_PROCEEDING_PROCEEDING)|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
17:34:18.561 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
17:34:18.561 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
17:34:18.561 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 396 from ISP-IP:[5060]:
[12623362,NET]
SIP/2.0 403 Forbidden
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
Server: CISCO-SBC/2.x
Content-Length: 0
Contact: <sip:ISP-IP:5060>
[12623363,NET]
ACK sip:2484XXX@ISP-IP:5060 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Length: 0
INVITE sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 0383266432-0000065536-0000191816-2219117834
Session-Expires: 1800
P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
Contact: <sip:057729XXXX@MY-CUCM-IP:5062>
Max-Forwards: 68
Content-Type: application/sdp
Content-Length: 215
v=0
o=CiscoSystemsCCM-SIP 4052092 1 IN IP4 MY-CUCM-IP
s=SIP Call
c=IN IP4 MY-CUCM-IP
t=0 0
m=audio 29792 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
|2,100,56,1.173711431^MY-CUCM-IP^MTP_3
17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 0|2,100,56,1.173711431^MY-CUCM-IP^MTP_3
17:34:18.567 |EnvProcessUdpHandler::fireSignal - SEND: index = 0, handler = 0xa6b4d7c0|*^*^*
17:34:18.567 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP's-Other-IP:5062|*^*^*
17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1177, ISP's-Other-IP:5062)|*^*^*
17:34:18.569 |EnvProcessUdpHandler::handle_input - handle = 335|*^*^*
17:34:18.569 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 0|*^*^*
17:34:18.569 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 394 from ISP's-Other-IP:[5062]:
[12623365,NET]
SIP/2.0 100 trying -- your call is important to us
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
Server: kamailio (3.3.1 (x86_64/linux))
Content-Length: 0
17:34:18.587 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 375 from ISP's-Other-IP:[5062]:
[12623366,NET]
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
CSeq: 101 INVITE
Reason: Q.850;cause=0;text="unknown"
Content-Length: 0
|2,100,230,1.4901099^ISP's-Other-IP^*
[12623367,NET]
ACK sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Length: 0

SIP/2.0 403 Forbidden error
If your router is sending a SIP/2.0 403 Forbidden error to the SIP server you are registered to, there is a good chance your router is blocking the incoming call due to the toll-faud prevention feature that was added to IOS version 15.1(2)T.
How to Identify if TOLLFRAUD_APP is Blocking Your Call
If the TOLLFRAUD_APP is rejecting the call, it generates a Q.850       disconnect cause value of 21, which represents ‘Call Rejected’. The       debug voip ccapi inout command can be run to       identify the cause value.
Additionally, voice iec syslog can be       enabled to further verify if the call failure is a result of the toll-fraud       prevention. This configuration, which is often handy to troubleshoot the origin       of failure from a gateway perspective, will print out that the call is being       rejected due to toll call fraud. The CCAPI and Voice IEC output is demonstrated       in this debug output:
%VOICE_IEC-3-GW: Application Framework Core: Internal Error (Toll fraud call rejected):
IEC=1.1.228.3.31.0 on callID 3 GUID=F146D6B0539C11DF800CA596C4C2D7EF
000183: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallSetContext:
   Context=0x49EC9978
000184: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 3 with tag 1002 to app "_ManagedAppProcess_TOLLFRAUD_APP"
000185: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallDisconnect:
   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
The Q.850 disconnect value that is returned for blocked calls can also       be changed from the default of 21 with this command:
voice service voip
ip address trusted call-block cause
How to Return to Pre-15.1(2)T Behavior
Source IP Address Trust List
There are three ways to return to the previous behavior of voice       gateways before this trusted address toll-fraud prevention feature was       implemented. All of these configurations require that you are already running       15.1(2)T in order for you to make the configuration change.
Explicitly enable those source IP addresses from which you would like           to add to the trusted list for legitimate VoIP calls. Up to 100 entries can be           defined. This below configuration accepts calls from those host           203.0.113.100/32, as well as from the network 192.0.2.0/24. Call setups from           all other hosts are rejected. This is the recommended method from a voice           security perspective.
voice service voip
ip address trusted list
ipv4 203.0.113.100 255.255.255.255
ipv4 192.0.2.0 255.255.255.0
Configure the router to accept incoming call setups from all source           IP addresses.
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
Disable the toll-fraud prevention application completely.
voice service voip
no ip address trusted authenticate
Two-Stage Dialing
If two-stage dialing is required, the following can be configured to       return behavior to match previous releases.
For inbound ISDN calls:
voice service pots
no direct-inward-dial isdn
For inbound FXO calls:
voice-port
secondary dialtone

Report Region incrementing ID number by 1 using Javascript

I have a report that pulls file names and id numbers from a table and displays them on the page.
I have set the 'id' column, which is a number type field in the table, to be a link to a javascript url that uses that number to delete the file from the table in question.
Whenever the javascript call passes the ID number to the function, it seem to round the number off - somtimes increasing the value by one and sometimes decreasing the value of the number.
My link on the report uses this syntax;
javascript:delFile(#ID#);
and the delFile function is as follows:
function delFile(cid){
var auth = $v('P52_AUTH');
if (auth.indexOf('D')>=0 || auth.indexOf('A')>=0) {
window.open('f?p=&APP_ID.:119:&SESSION.::NO::P119_DOCID:'+cid,'PopUp','scrollbars=no,resize=no,height=300,width=300');
else {
alert('You do not have sufficient rights to delete documents.');
I am at a loss. Why does the 'cid' var get rounded up or down when the variable gets populated?

I concur with what you are saying - this is standard javascript handling and my first assessment of the situation was that it had something to do with the data in the tables. The problem is that the data in the table is simply a number, and the function is passed the number through the link on the page.
Putting a functioning example on apex.oracle.com would be like me dealing with a problem I am having painting a house by building a robot to dip the paint brush in the paint bucket for me. The test would never result in an apples to apples example, and is far too complex an option to give any valuable return. Additionally, the reason I submitted the results I did is because when it works for a particular record in the table, it always works no matter what. When it doesn't work, it doesn't ever work for the data record in question. There isn't any mystery in this except for the 'black box' that is in the middle of it that populates the #ID# value. Is there anything under the hood with that that could cause the number to inexplicably round off?
My next guess that I have not tested is if the issue happens in Internet Explorer as opposed to Firefox. I have seen the problem in Firefox on Windows and Firefox on Ubuntu.
Is there anything in the report template that could cause the #ID# to inexplicably round itself?
I will do some additional testing and post what I find.

How do I find the number of characters including spaces in Pages '13?

Hi,
I need the number of characters including spaces on the new pages for an online document I have to fill in. I've found the character count excluding spaces but this is of no use to me.
Thanks

http://lifehacker.com/5907637/add-a-right+click-option-to-count-characters-words -and-paragraphs-in-any-mac-program
Use this version of the script:
http://hints.macworld.com/comment.php?mode=view&cid=129016
Peter

Credit card payment with eway returns "invoice number not found" on BC

dear all,
I am currently working on the payment gateway of pared.com.au. the problem we're having is that every credit card payment gets redirected to the "Credit Card Payment Fail" page, although the payment was marked as successful on eway.
eway transaction details stated "response code: 00", response text "transaction approved".
however, the CC payment fail page stated:
"there was an error processing your credit card. please correct this and try again.
invoice number not found: . please go back and correct this."
strangely enough, the order is perfectly recorded as successful order in BC (customers -> orders).
any help would be much appreciated - i've been looking at this for hours but i'm getting nowhere. thanks everyone!
please find the checkout page HTML below for reference (country selection omitted to save space):
<form id="catwebformform42059" name="catwebformform42059" onsubmit="return checkWholeForm42059(this)" action="/FormProcessv2.aspx?WebFormID=10850&OID={module_oid}&OTYPE={module_otype} &EID={module_eid}&CID={module_cid}&CC={module_urlcountrycode}&Referrer={mo dule_siteurl,true,true}&SAR=False&PageID=/thankyou.html" method="post" enctype="multipart/form-data">
    <div class="form">
    <div id="step1">
    <div class="item"><label>Title</label><br />
    <select class="cat_dropdown_smaller" id="Title" name="Title">
    <option value="3" selected="true">MISS</option>
    <option value="1">MR</option>
    <option value="2">MRS</option>
    <option value="4">MS</option>
    </select> </div>
    <div class="item"><label>First Name</label><br />
    <input type="text" class="cat_textbox" id="FirstName" maxlength="255" name="FirstName" /> • </div>
    <div class="item"><label>Last Name</label><br />
    <input type="text" class="cat_textbox" id="LastName" maxlength="255" name="LastName" /> • </div>
    <div class="item"><label>Email</label><br />
    <input type="text" class="cat_textbox" id="EmailAddress" maxlength="255" name="EmailAddress" /> • </div>
    <div class="item"><label>Company</label><br />
    <input type="text" class="cat_textbox" id="Company" maxlength="255" name="Company" /> </div>
    <div class="item"><input type="button" name="next2" value="Next" onclick="display_next2();" /></div>
    </div>
    <div id="step2" style="display: none;">
    <div class="item"><label>Shipping Address</label><br />
    <input type="text" class="cat_textbox" id="ShippingAddress" maxlength="500" name="ShippingAddress" /> </div>
    <div class="item"><label>City</label><br />
    <input type="text" class="cat_textbox" id="ShippingCity" maxlength="255" name="ShippingCity" /> </div>
    <div class="item"><label>State</label><br />
    <input type="text" class="cat_textbox" id="ShippingState" maxlength="255" name="ShippingState" /> </div>
    <div class="item"><label>Zipcode/Postcode</label><br />
    <input type="text" class="cat_textbox" id="ShippingZip" maxlength="255" name="ShippingZip" /> </div>
    <div class="item"><label>Country</label><br />
    <select class="cat_dropdown" id="ShippingCountry" name="ShippingCountry">
    <option selected="true">-- Select Country --</option>
    </select> </div>
    <div class="item"><input type="button" name="next3" value="Next" onclick="display_next3();" />  <input type="button" name="back3" value="Back" onclick="display_back3();" /></div>
    </div>
    <div id="step3" style="display: none;">
    <div class="item"><input type="checkbox" id="sameas_shipping" name="sameas_shipping" value="1" onchange="handleChange(this.value);" />  Billing is same as Shipping<br />
    <div class="item"><label>Billing Address</label><br />
    <input type="text" class="cat_textbox" id="BillingAddress" maxlength="500" name="BillingAddress" /> </div>
    <div class="item"><label>City</label><br />
    <input type="text" class="cat_textbox" id="BillingCity" maxlength="255" name="BillingCity" /> </div>
    <div class="item"><label>State</label><br />
    <input type="text" class="cat_textbox" id="BillingState" maxlength="255" name="BillingState" /> </div>
    <div class="item"><label>Zipcode/Postcode</label><br />
    <input type="text" class="cat_textbox" id="BillingZip" maxlength="255" name="BillingZip" /> </div>
    <div class="item"><label>Country</label><br />
    <select class="cat_dropdown" id="BillingCountry" name="BillingCountry">
    <option>-- Select Country --</option>
    </select> </div>
    <div class="item"><input type="button" name="next4" value="Next" onclick="display_next4();" />  <input type="button" name="back4" value="Back" onclick="display_back4();" /></div>
    </div>
    </div>
    <div id="step4" style="display: none;">
    <div class="item"><label>Work Phone Number</label><br />
    <input type="text" class="cat_textbox" id="WorkPhone" maxlength="255" name="WorkPhone" /> </div>
    <div class="item"><label>Shipping Instructions</label><br />
    <textarea class="cat_listbox" id="ShippingInstructions" name="ShippingInstructions" cols="5"></textarea> </div>
    <div class="item"><input type="button" name="next5" value="Next" onclick="display_next5();" />  <input type="button" name="back5" value="Back" onclick="display_back5();" /></div>
    </div>
    <div id="step5" style="display: none;">
    <div style="width: 100%; float: left;">
    <div style="width: 52%; float: left;">
    <div id="paymentdiv">
    <div class="item"><label>Name on Card</label><br />
    <input type="text" class="cat_textbox" id="CardName" name="CardName" /> • </div>
    <div class="item"><label>Card Number</label><br />
    <input type="text" class="cat_textbox" id="CardNumber" name="CardNumber" /> • </div>
    <div class="item"><label>Card Expiry</label><br />
    <select class="cat_dropdown_smaller" id="CardExpiryMonth" name="CardExpiryMonth">
    <option value="1" selected="true">Jan</option>
    <option value="2">Feb</option>
    <option value="3">Mar</option>
    <option value="4">Apr</option>
    <option value="5">May</option>
    <option value="6">Jun</option>
    <option value="7">Jul</option>
    <option value="8">Aug</option>
    <option value="9">Sep</option>
    <option value="10">Oct</option>
    <option value="11">Nov</option>
    <option value="12">Dec</option>
    </select><select class="cat_dropdown_smaller" id="CardExpiryYear" name="CardExpiryYear">
    <option selected="true" value="2012">2012</option>
    <option value="2013">2013</option>
    <option value="2014">2014</option>
    <option value="2015">2015</option>
    <option value="2016">2016</option>
    <option value="2017">2017</option>
    <option value="2018">2018</option>
    <option value="2019">2019</option>
    <option value="2020">2020</option>
    <option value="2021">2021</option>
    </select> • </div>
    <div class="item"><label>Card Type</label><br />
    <select class="cat_dropdown" id="CardType" name="CardType">
    <option value="1" selected="true">Visa</option>
    <option value="2">Master Card</option>
    <option value="3">Bank Card</option>
    <option value="4">American Express</option>
    <option value="5">Diners Club</option>
    <option value="6">JCB</option>
    </select> • </div>
    <div class="item"><label>CCV Number</label><br />
    <input type="text" class="cat_textbox" id="CardCCV" name="CardCCV" /> • </div>
    </div>
    
    <div class="item"><label>Amount</label><br />
    <input type="text" class="cat_textbox" id="Amount" name="Amount" /> • </div>
    <div class="item"><input type="submit" class="cat_button" id="catwebformbutton" value="Submit" />  <input type="button" name="back6" value="Back" onclick="display_back6();" /></div>
    </div>
    <div style="width: 47%; float: right;">
    <div class="item"><label>Payment Method</label><br />
    <input type="radio" class="PaymentMethodType" onclick="ShowCCFields(this.value);" checked="true" value="1" name="PaymentMethodType" />Credit Card<br />
    <input type="radio" class="PaymentMethodType" onclick="ShowCCFields(this.value);" value="5" name="PaymentMethodType" />PayPal<br />
    </div>
    <div class="item"><img alt="GlobalSign SSL Site Seal" src="/CatalystImages/globalsign-ssl-site-seal.gif" /> </div>
    </div>
    </div>
    </div>
    <script type="text/javascript" src="/CatalystScripts/ValidationFunctions.js"></script>
    <script language="javascript" type="text/javascript">
               //<![CDATA[
               var submitcount42059 = 0;function checkWholeForm42059(theForm){var why = "";if (theForm.FirstName) why += isEmpty(theForm.FirstName.value, "First Name");if (theForm.LastName) why += isEmpty(theForm.LastName.value, "Last Name"); if (theForm.EmailAddress) why += checkEmail(theForm.EmailAddress.value); if (!theForm.PaymentMethodType || getRadioSelected(theForm.PaymentMethodType) == 1) { if (theForm.CardName) why += isEmpty(theForm.CardName.value, "Name on Card"); if (theForm.CardNumber) why += isNumeric(theForm.CardNumber.value, "Card Number"); if (theForm.Amount) why += isCurrency(theForm.Amount.value, "Amount"); } if (theForm.PaymentMethodType) why += checkSelected(theForm.PaymentMethodType, "Payment Method");if(why != ""){alert(why);return false;}if(submitcount42059 == 0){submitcount42059++;theForm.submit();return false;}else{alert("Form submission is in progress.");return false;}}
               // Credit Card info is not required if paying by PayPal, Hosted Credit Card, COD etc
               function ShowCCFields(val) {
                   if (!document.getElementById('paymentdiv'))
                         return;
                   if (val != 1)
                         document.getElementById('paymentdiv').style.display = 'none';
                   else
                         document.getElementById('paymentdiv').style.display = 'inline';
               //]]>
         </script>
    </div>
</form>
</div>

This answer from Support cured the problem...
Gaurav Sharma (Adobe Business Catalyst Support)
Feb 20 04:12 (EET)
Thank you for contacting us!
I just see your online shop purchase form, which contains update credit card fields,
http://screencastmb.worldsecuresystems.com/img/2013-02-20_1309.png
As per the field description, it's used fo rupdating CC details, not for purchases.
Remove that system field and reinsert the form, and it should then work
Kind Regards

Call Forwarding / Displayed Number on Forwarding target with H.323 Gateway

Hi Community,
i´m wondering if there is sort of a simple way to get this working properly.
Scenario:
Germany, variable dial plan, no fixed NANP, and we have ClipNoScreening ;)
We use 0 for getting PSTN-dialing.
We have internal DNs, for example a 6789, 4 Digits. We use external phone number mask on our lines, 123456XXX
Our main number is 0123/456-xxx
When i call outside everything is displayed fine on the called target, +49 123/456789.
When i forward a call on my cellphone, with CFA target of 00111/222333444 (my cellphone example), and an internal colleague from within our office, is calling my office phone, everything is ALSO displayed fine.
Now here comes the BUT:
When someone calls from PSTN on my office-phone, i get displayed on my cellphone the +49 (0) 0xxxxxxxx, which means the caller number PLUS the added 0 from the gateway. Which is completely consequent and correct, since we add them on the gateway, when a call comes in, to be able to just answer directly on the office phone.
The rule on the H323 gateway:
voice translation-profile OUTGOING-VOIP
translate calling 1
translate called 2
voice translation-rule 1
rule 1 /^$.*$/ /0\1/ type subscriber unknown plan any unknown
rule 2 /^$.*$/ /00\1/ type national unknown plan any unknown
rule 3 /^$.*$/ /000\1/ type international unknown plan any unknown
voice translation-rule 2
rule 6 /4560$/ /6600/
rule 9 /^456$...$$/ /6\1/
voice translation-profile OUTGOING-POTS
translate calling 3
translate called 4
voice translation-rule 3
rule 1 /^00049/ /0/ type unknown national
rule 2 /^0/ // type unknown subscriber
rule 3 /^00/ /0/ type unknown national
rule 4 /^000/ /00/ type unknown international
voice translation-rule 4
rule 2 /^00049$.*$$/ /\1/ type unknown national
rule 3 /^000$.*$$/ /\1/ type unknown international
rule 4 /^00$.*$$/ /\1/ type unknown national
rule 5 /^0$.*$$/ /\1/ type unknown subscriber
dial-peer voice 10456 voip
translation-profile outgoing OUTGOING-VOIP
destination-pattern 456.T
progress_ind setup enable 3
modem passthrough nse codec g711ulaw
session target ipv4:<IP-OF-CUCM>
incoming called-number .
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate disable
fax protocol pass-through g711ulaw
no vad
no supplementary-service h225-notify cid-update
dial-peer voice 345000 pots
tone ringback alert-no-PI
translation-profile outgoing OUTGOING-POTS
destination-pattern 0.T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/0:15
forward-digits all
In case of forwarding the external call to an external device, like for example a cellphone, this is crap.
Its obvious regarding the debugs all is working as designed ;), because my phone just forwards the full calling number including the added 0, since i put in to forward the originating calling DN.
My question now:
Can i simply correct this behavior somehow, also for international calls which would the 00 get added by the gateway?
Many thanks in advance for some input,
Andreas

Hi Community,
i´m wondering if there is sort of a simple way to get this working properly.
Scenario:
Germany, variable dial plan, no fixed NANP, and we have ClipNoScreening ;)
We use 0 for getting PSTN-dialing.
We have internal DNs, for example a 6789, 4 Digits. We use external phone number mask on our lines, 123456XXX
Our main number is 0123/456-xxx
When i call outside everything is displayed fine on the called target, +49 123/456789.
When i forward a call on my cellphone, with CFA target of 00111/222333444 (my cellphone example), and an internal colleague from within our office, is calling my office phone, everything is ALSO displayed fine.
Now here comes the BUT:
When someone calls from PSTN on my office-phone, i get displayed on my cellphone the +49 (0) 0xxxxxxxx, which means the caller number PLUS the added 0 from the gateway. Which is completely consequent and correct, since we add them on the gateway, when a call comes in, to be able to just answer directly on the office phone.
The rule on the H323 gateway:
voice translation-profile OUTGOING-VOIP
translate calling 1
translate called 2
voice translation-rule 1
rule 1 /^$.*$/ /0\1/ type subscriber unknown plan any unknown
rule 2 /^$.*$/ /00\1/ type national unknown plan any unknown
rule 3 /^$.*$/ /000\1/ type international unknown plan any unknown
voice translation-rule 2
rule 6 /4560$/ /6600/
rule 9 /^456$...$$/ /6\1/
voice translation-profile OUTGOING-POTS
translate calling 3
translate called 4
voice translation-rule 3
rule 1 /^00049/ /0/ type unknown national
rule 2 /^0/ // type unknown subscriber
rule 3 /^00/ /0/ type unknown national
rule 4 /^000/ /00/ type unknown international
voice translation-rule 4
rule 2 /^00049$.*$$/ /\1/ type unknown national
rule 3 /^000$.*$$/ /\1/ type unknown international
rule 4 /^00$.*$$/ /\1/ type unknown national
rule 5 /^0$.*$$/ /\1/ type unknown subscriber
dial-peer voice 10456 voip
translation-profile outgoing OUTGOING-VOIP
destination-pattern 456.T
progress_ind setup enable 3
modem passthrough nse codec g711ulaw
session target ipv4:<IP-OF-CUCM>
incoming called-number .
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate disable
fax protocol pass-through g711ulaw
no vad
no supplementary-service h225-notify cid-update
dial-peer voice 345000 pots
tone ringback alert-no-PI
translation-profile outgoing OUTGOING-POTS
destination-pattern 0.T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/0:15
forward-digits all
In case of forwarding the external call to an external device, like for example a cellphone, this is crap.
Its obvious regarding the debugs all is working as designed ;), because my phone just forwards the full calling number including the added 0, since i put in to forward the originating calling DN.
My question now:
Can i simply correct this behavior somehow, also for international calls which would the 00 get added by the gateway?
Many thanks in advance for some input,
Andreas

Prepend a 1 to a number in CID

Similar Messages

Maybe you are looking for