Prepositioning windows media content with centrally managed CDM and CEs

We have recently installed a configuration of Cisco CEs and one CDM (model 566) to support windows media streaming from our intranet IIS/Windows Media servers. We have configured routers in area locations to transparently re-route WMT requests to a locall CE. We are trying to preposition windows media content from our web servers to the CEs. We have configured a device group for a channel associated with each web/windows media server but are UNABLE to get any content replicated down to the CEs. The failure begins with the root CE. I have tried content channels requests by IP number and specific wmv references within the WIndows Media publishing point, using mms protocol, by FQDN with publishing points and specific single file references and by FQDN crawl jobs. Nothing is working. I am able to open up specific wmv files using the same paths within a windows media client or IE browser with no problem.
IS there something special to be done here? The configuration is for on-demand--not multicast access--and I have only tried using the CDM's gui interface to set up the job--no manifest file.
This should be easy but it is proving to be very frustrating and Cisco CE support has not id'd the issue. Is it an authentication issue between the root CE and web/WM server? something else?

thanks, believe or not, I'm just now getting back to this issue due to a prolonger issue affecting all of our Content Devices that I won't bore you with....anyway, do you know whether the newer versions of ACNS, spec. 5.5.5 fix this issue...currently running 5.3.5

Similar Messages

  • Can I export to Windows Media 1080p with same quality as Windows Live Movie Maker?

    I am looking to replace Windows Live Movie Maker, because of the following:
    it keeps crashing
    it has occasional problems with audio sync when I use MTS source files
    it has very limited editing features (especially inability to increase audio levels for a clip)
    However, I would like to still render to 1080p Windows Media files for archiving. Does anyone know if there are settings I could use in Premiere to export to 1080p and get equivalent quality to WLMM?  I have failed to find a combination of settings in Premiere that doesn't mess up the video with horizontal lines during motion.  Here is an example:
    When I use the 1080p export setting in WLMM, the video comes out looking essentially the same as the original MTS files, like in this snapshot:
    However, I have failed to find any settings in Premiere Elements that will give an equivalent result.  Below is a snapshot from the Windows Media file I exported from Premiere:
    And these are the settings I used:
    My Equipment:
    Canon Vixia HF200
    Windows 7 x64
    AMD Phenom II x4 945 3Ghz
    4GB RAM
    300GB 10K RPM HDD
    ATI Radeon 4800 Series
    Premiere Elements 8 trial
    Thanks,
    -Robyn

    Hi Steve,
    Thanks for the response.  I did go back and verify the project setting, and I think I was originally using the wrong project settings.  This is what I'm using now for the project:
    And then to share, I went to Personal Computer -> WMV, and selected these advanced settings:
    Unfortunately, I still see the jagged horizontal lines like the original screenshot I posted.  I tried playing with other video export settings (constant bit rate, at 8,000 and 20,000 also), and with variable constrained/unconstrained output.  I'm really at a loss for what is going on.  I did confirm that it doesn't have the horizontal lines if I encode to MPEG, but the WMV problem persists.

  • Sell media content with itunes store in Russia

    Hello.
    I have a question:
    How can i sell myown uniq media content with itunes store in Russia, and what do i need to do this?
    I've read a FAQ of selling indie music in itunes on American version of your website, but there is only an instruction about selling music in U.S. and Europe region - not for Russia.
    Also i trying to find any faq on Russian Apple web site, but there is nothing.
    Also i would to know what about Apple-approved aggregators and encoding houses in Russia?
    Thank you!

    Finally i got an answer from itunes store support about my question.
    If somebody have the same questions as i, here i would write some text from the massage of apple support.
    "I understand that you want add your own media content on iTunes Store. I know how eager you are to get the information. I will do everything possible to help you today.
    To submit an application to have your own content added to the iTunes Store, please visit the iTunes Labels & Marketing page at:
    http://www.apple.com/itunes/go/application/
    Apple evaluates each application individually, so it may take longer than we'd like to get back to you. But don't worry - we will review your application and contact you if we are interested in adding your content to the iTunes Store."
    Thats all that thay wrote to me.

  • Windows Media Player with 10.4.6

    My first post here so I hope I do it right.
    My question relates to using the Windows Media Player with the new Operating System. I just upgraded from v.10.2 to 10.4. Once I upgraded I was no longer able to open any files in Windows Media player. I figure,no big deal, I just need to upgrade my Media Player. I downloaded Windows Media 9 Player for Mac. Installed no problem but when I try to open I get the message "The application Windows Media Player closed unexpectedly". I then downloaded and installed Flip4Mac as well, but I got the same error messsage.
    Am I just missing something obvious?
    Any help is appreciated.
    Thanks
    Flagg
    Powerbook G4   Mac OS X (10.4.6)  

    Both work here without any problem. I suspect a bad installation. Start over by first deleting these from ~/Library/Preferences/: com.microsoft.mediaplayer.plist, Windows Media Favorites, Windows Media Player Prefs; these from /Library/Internet Plug-ins/: /Disabled Plug-ins/Windows Media Plugin, Flip4Mac WMV Plugin.plugin, and Flip4Mac WMV Plugin.webplugin; and the Flip4Mac WMV.prefPane from /Library/Preference Panes/Flip4Mac WMV.prefPane, restarting, repairing permissions, reinstalling WMP and see if it launches. If so, reinstall Flip4Mac and see if that launches. If you have any problems, report back.

  • Why is my songs going to windows media player instaed of my itunes and how do you sort it

    why is my songs going in to windows media player instead of my itunes and how do i fix it?

    click on File right at the top corner of the screen and a menu appears from which you choose add file or folder.
    I'd also suggest you change your preferences to keep your iTunes library organised, To do that choose Edit at the top of the screen, then click on preferences at the bottom of the list.  There's a row of icons with words below them, you need the last one 'advanced'.  Tick the box against Keep iTunes Media Folder Organised and the one against Copy files to iTunes Media folder when adding to library - which will ensure any music or video you add to your computer by importing it into itunes will go into folders within the iTunes Folders on your computer.
    I'd also suggest ticking the option further down that screen for 'warn me if itunes  is not the default player  for audio files' - I'm assuming you want to play your music via itunes and not windows media player so you need iTunes to be the default player. 
    Note though that when you have ticked the boxes iTunes will then go through your music library organising it so you will need to wait while it does that - doesn't take long.

  • MTS with batch management, serialization and Handling unit

    Hello All,
    I am testing a scenario for MTS with batch management, serialization and Handling unit for discrete manufacturing.
    Everything worked fine till I created the Handling unit for the finished product.
    The production order has a quantity of 3 EA.
    It has three serial numbers 1, 2 and 3. (serial numbers can be displayed from order->Header->serial numbers)
    I created one Handling unit for production order quantity of 3 EA.
    I tried to do a goods receipt for the production order using transaction COWBHUWE.
    I get the following error when I try to post the GR:
    Only 0 serial numbers entered instead of 3
    Message no. IO304
    Diagnosis
    There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
    You can post the operation only if you entered the correct number of serial numbers previously.
    System Response
    Depending on the context in which the error arises, the system continues processing, or the required function cannot be performed.
    Procedure
    You have the following options, for example:
    Check that the serial numbers are entered fully.
    If necessary, display an error log.
    If necessary, contact your system administrator.
    What did I miss?
    How to fix this problem?
    Please help.
    Thanks in advance
    George

    I added the serialization procedure HUSL to the serial number profile and it fixed the problem.

  • Embedded Windows Media PLayer With Non-Standard File Extension

    I have embedded a windows media player in a asp.net web page, using the usual
    <object> and <embed> tags. The video is served by an ashx (http handler). When I try to play the video, I usually (but not always) get an error message telling me that the file extension (ashx) does not match the file format.
    This happens in IE (8, 9, 10, 11) and also in Firefox (latest) with the WMP plugin.
    I know that the tags (with classid, etc) are correct because the media player displays and allows me to click the 'play' button.
    The ashx returns the correct mime type (video/x-ms-wmv) and a valid file name (somevideo.wmv) in the response headers. I have tried content-disposition attachment and inline.
    I have tried urls using 'http://', 'https://', and '//' (which I prefer)
    If I put the url (including the .ashx) of the video file in the browser address bar directly, the video downloads and plays in the standalone media player.
    If I modify the object tag to use a direct path to the video file (/somewhere/somevideo.wmv), it works - but I can't use this as a solution.
    The same ashx serves up video and audio in various other formats with out any fuss - it just seems that the embedded windows media player doesn't like it.
    This has been working for several years - I think this is some new behavior, though I can't identify what has changed, other than browser updates.
    Any ideas on what could be causing this? Am I missing something simple?

    Hi,
    Tools>Internet Options>Security tab, click "Reset all zones to default"
    Advanced tab of Internet Options>uncheck "Do not save encrypted files to disk"
    f12>Networking tab, click the Start button, navigate to your page and observer the response header and content.
    To determine if you page is being rendered in a x64 host (all IE versions and WaterFox, type
    navigator.platform in the IE Developer tools Console tab,
    Post questions about html, css and scripting for website development using MSIE browsers to the IE Web Development forum... WITH a link to your website.
    Rob^_^

  • Windows media player with safari for windows

    Hi everyone
    just a little problem of mine...
    safari seems unable to detect windows media player. I get a message about 'content of MIME type application/x-mplayer2' when I safari tries to use media player. I tried installing the plugin on this page http://www.apple.com/safari/download/plugins.html which didn't seem to work. I don't know if this is a mistake but the file name suggests the plugin is for firefox...
    i have also tried installing quicktime and realplayer with no effect
    help appreciated; thank you in advance!

    Hi on_safari,
    I don't know if this is a mistake but the file name suggests the plugin is for firefox...
    Safari and Firefox (and other browsers) use the same interface for handling plug-ins so Safari should be able to use it nonetheless.
    I tried installing the plugin on this page http://www.apple.com/safari/download/plugins.html which didn't seem to work.
    Can you describe in more detail what you mean? What did you try and what happened? Were any error messages generated?

  • Anti Virus with centralized management console

    They do provide a 30 day free trial....
    http://www.kaspersky.com/business-security/endpoint-select

    Galaxy_Man wrote:
    You can have a look at Kaspersky Business Select package; it comes with the Kaspersky Security Center for centralized management; we have been using it for a while now and so far it's worked well for us.There are so many type. which one are you using right now??
    Kaspersky Endpoint Security for Business | Select
    Kaspersky Security Center (including MDM)
    Kaspersky Security Center (including MDM)
    Kaspersky Endpoint Security for Windows
    Kaspersky Endpoint Security for Linux
    Kaspersky Endpoint Security for Mac
    Kaspersky Anti-Virus for Linux File Server
    Kaspersky Anti-Virus for Windows Servers Enterprise Edition

  • Error synching Windows 7 Contacts with Desktop Manager

    Hi
    I'm new here and would appreciate any help you can give.
    I''m having trouble synching the email addresses in my Windows Contacts file with my Blackberry.  Not all email addresses synchronise properly, which is probably because they are sourced from several different databases previously.  There doesn't seem to be a way to map the fields accurately as the Windows 7 contacts folder shows the field as "E-mail Address" and the Desktop Manager shows the field being imported from Windows as "Preferred Address".  This mapping only transfers those addresses which were previously exported from a BB/Lotus Notes database.
    I've tried exporting to csv's and changing the field names as well as importing through Outlook 2010 rather than WIndows but with no success.
    Has anybody else had this problem and found a solution?
    Any advice or suggestions welcomed.

    halimsujanto wrote:
    Hi all..
    I am having the same problem with desktop software 6, but my problem is more like this..
    http://www.blackberry.com/btsc/KB19300
    The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
    In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
    I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
    PS. Bifocals..
    The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
    Please if there is other link that may be good for my problem.
    Thank you very much.
    Hi ihalimsujanto and welcome to the forums!
    My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
    Please post back with as much detail as possible regarding your hardware and software setup.
    Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
    Thanks.
    Bifocals
    EDIT:
    ihalimsujanto,
    Please review this Microsoft Knowledgebase  Article ID: 555175
    How to resolve Common "Windows Installer" Problems
    Methods 3 and 4 may be pertinent.
    Let us know how it goes!
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • JFServer.exe fault in Windows 2008 server with Central V 5.7

    I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted.  Here is the error that it logs in the Central Log. 
    "Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
    This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
    This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
    Any thoughts on why this might be happening?

    This is a recently known issue specific to Central on Windows 2008
    Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement.

  • Windows Media problem with Airport N

    I'm having an odd problem. Since upgrading my airport to the new version, I can't get certain Windows Media files to play. They worked perfectly before with Flip4Mac and on my MacPro with XP bootcamp, but now I get a "URL not found" error. It doesn't work on any of my computers, Intel mac, PPC mac, or XP via boot camp or parrells. These files have been confirmed to work out side mty network.... Also other WMV files on other sites work fine, CNN for example.
    Any insight? Is there something wrong in my set up? Is it a bug? Hmmmm....
    Examples of the files in question can be found here:
    http://www.med.wayne.edu/newsmedia/streamingmedia/somevents/studentaffairs.asp
    Thanks for any help that you can give me. My grades depend on it!
    Airport Extreme N   Mac OS X (10.4.8)  

    Hm, so far away, without testing somethings its hard to say, thats happen.
    Its not clear for me ... at first you say, we talking about airport extreme, now it is an airport express - thats different. Because, in default mode the airport extreme work as an cable modem/router. The first physical port (marked as Ethernet WAN Port) is configured as an P2P line.
    You can use that port as an normal Ethernet port, but need to configure. May, that ist the problem.
    The configuration have to be "bridging". See http://support.apple.com/kb/PH5104

  • Install Windows Media Player with GPO

    Hello,
    I want to install Windows Media Player on multiple machines by using a GPO. Anyone who knows how to do this? Because I have little experience doing this. but figured this should be pretty easy. Any other way is appreciated, as long as it is managable.
    Thanks in advance.
    Rense Hartog

    Hi,
    Thanks for posting.
    Please see steps here for step by step instructions:
    http://www.linglom.com/administration/deploy-windows-media-player-using-group-policy-part-i-make-an-msi-installer/
    Thanks
    Denis
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    Blog: http://www.windows-support.co.uk 
    Twitter:   LinkedIn:

  • Easiest way to access windows media files with DRM?

    hi,
    i've got a whole bunch of music and vid files from an old PC that I can't access on my MBP because they use windows media DRM that is not available for OSX. they won't play with flip 4 mac either.
    my question is: what's the easiest and least invasive way to get access to these files on the MBP? I realise I could use bootcamp and install XP, or do the same with parallels.. but, I don't want to sacrifice the huge amount of drive space needed to get XP working (nor do I really want to have to buy a copy of XP) with either bootcamp or parallels, because I'd really never ever use windows.. only ever to access these files.
    I've heard there is another virtualisation option out there that doesn't even require a full copy of windows, but I don't know what it is or if this was just mistaken hearsay. if anyone has any ideas about if something like this exists, I'd like to hear about it..
    cheers...

    You might be thinking of Crossover. Not sure if Windows Media Player works under it, but their website has info on requested and working apps.
    Best of luck.

  • Can I use quicktime to watch windows media streaming with authentication?

    I everyone. I am running into a problem here. I have a Mac Book Pro and would like to watch some windows media streams. Until last month I was using Quicktime to watch them because they were not protected. But beginning on this month they implemented a security access where we need to put login and password in order to watch the stream.
    If I try to acess that mms using Windows Media Player or Real Player on Windows, it opens a pop up asking for my username and password. However on my Mac Book Pro I can't get to this authentication screen using any player.
    I have tried Quicktime, but also tried VLC, Real Player and Windows Media Player 9 for Mac. None of these play the mms since they started using the authentication scheme.
    Can anyone help? Can I somehow authenticate to the sever and watch the mms on my Mac Book Pro? (I know I can use a Virtual Machine and watch this on Windows, but I would prefer to not depending on Windows)
    Appreciate any help!
    Denis

    Sorry, I should have clarified that. MMS is the stream protocol used by Microsoft Media Services (http://en.wikipedia.org/wiki/MicrosoftMediaServices) .
    I know Quicktime could run it if I have Flip4Mac installed, that's why I could watch those streams until last month. The problem started after then applied authentication to those streams. Now when I go to Quicktime, select "Open URL" option, and add the stream mms address (mms://link), it just doesn't do anything. It is something with the authentication because when there was no authentication it just worked perfectly.
    Is there any way to make Quicktime authenticate to a Windows Media Server?

Maybe you are looking for