Preprint AP check - stub/check repetitive area fram size

What is the rule to make each area size to fit the preprinted form? I think each form has certain height for So, Invoice, BOL probalby 720 and width like 600. I have hard time to ajust the each area to fit with preprinted BOL or AP check.
If I have to print on the bottom of the form, that will be Repoet Footer or Page Footer?
I think two Repetitibe Areas, the first one is for Repetitive detail and the second one is for SubTotal or ColSum total use.
AP Check has Report Header with Adjust Area Height for 32, Repetitive area w/o adj. height 20, then Repetitive area w/o adj. height 188 then Page Footer w/o adj. height 500. How to enlarge first Repetitive area but decreae second Repetibe area while the check portion remain the same size. Should I make the Report Header Adj. Height unchecked?

Hi Lily,
The following steps are to be done when you use the Preprinted Paper
1.First Measure the Preprinted Paper size (Height & Width) Based on this size
you create your own paper size.
     1.Open Printer & Faxes through Control Panel(Start->Control Panel->Printer & Faxes)
     2.in Menubar Go to File->Server Properties
     3.Put tick Mark on Create a New Form
     4.Choose Units : as Metric
     5.Define the Paper size in Centi meter(Width & Height)
     6.In Form Name field Enter the Name of the Paper size
     7.Click Save Form.
     8.Open the PLD
     9.In Print Layout designer Menu choose the Newly Created Paper size
2.In PLD Layout checked the Area Height adjustment in (Page Header,Repetitive Area,End of
report etc..)
Check this thread,
Re: Dot matrix layout design
Regards
Madhan.

Similar Messages

Why are frame sizes increasing after editing with Nik plug-ins?

I’m using the Nik Collection of plug-ins with Aperture, and have discovered that the frame size of the resulting edits always end up larger than the original - sometimes much larger.
The original image starts as 4592 x 3448 but after editing, the longest side of the resulting image is typically over 5000, 6000 or even 7000 pixels.
I recently worked on a cropped image that started at 4138 x 2759 and ended up at 7361 x 4908, after editing with a combination of Dfine, Viveza, Color Efex + Silver Efex. If I export a version during the editing process, and then carry out futher editing, the frame size increases again.
I’m exporting from Aperture using the TIFF - Original Size (16 bit) setting.
Can anyone tell me what’s going on here? I’m concerned that the quality of the images is being compromised by the enlargement.
I'm using the latest set of Nik plug-ins, with Aperture 3.2.4 on a MBP running 10.6.8

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

Defaulting scale to frame size

I'm stuck. I am about to pull in a whole bunch of still images into my timeline. I know I need to go to - edit-preference-general-check the "default scale to frame size". Here is where I am lost. I need to fing the back leash key.. I can't remember where this is

We did is this way because it's the only way for us to easily reproduce that feature in AE.
Since AE doesn't support it natively, we need to emulate it. We emulate it by sticking the footage in a precomp of the 'frame size' and set the scale on the footage on that layer to make it work. One could argue that if the scale is 100% we should optimize this and just leave out the precomp, but as you can see we didn't think of that at the time.
Is that the situation you are in?
--chris

AP check preprinted PLD - Payment for check

I edited the Long_Sub_Check PLD with Before Discount Amount, Discount Amount and Applied Amount. I saw the print out few invoice numbers were missing and I doubt I only use OPCH, cust/vendor Ref. number and set NOT visible for VPM2, InvoiceKey caused the problem.
Can I add different table's field in the same position or should I add another row in the Repetitive Area (visible, check the Area Hedith Adjust) for VPM2, column InvoiceKey for Outgoing Payment Invoice with OVPM, Check Amount?
I reduced the space between Invoices by adding checkmark for "Area Height Adjust ", not sure this is correct.

Hi Madhan,
Would you show me how to do it QPLD? How many tables and column fields I need to print all invoice number in AP check? I got most of invoice numbers only few disappeared, one of them was from Service type AP Invoice, the description had more than 20 characters text that only printed 5 letters.
Yes, I have Before Discount, Discount, Applied Amount in the stub. Between each row the space is too big now. I added "checkmark" on "Area Height Adj". Thanks.
Edited by: Lily Chien on Sep 16, 2009 5:34 PM

PLD Check stub-stub layout

Hello Experts, I'm running into a problem trying to adjust the placements of values in my layout to fit an A/P proof check
my currently layout: http://i12.photobucket.com/albums/a242/iisarithii/Check-stub.png
Results: http://i12.photobucket.com/albums/a242/iisarithii/PLDlayout.png
My problem is having the values shift up and down to match the layout of the check stub. The circled values in the image above, is there any way to move these values lower or higher in height independantly to fit my placement needs? They are placed within the repetitive area
Edited by: Sarith Chey on Jan 19, 2012 12:03 AM

Hi,
You may check the Vertical Alignment of that printing area to make it top aligned.
Thanks,
Gordon

PLD Check Stub Stub

I need to match customers pre-printed "Check Stub Stub". After changing the settings If I somehow get to the point where the Check part and the first Stub matches, the second Stub doesn't. I don't understand how PLD is calculating where to print what?
For example if I make the Height of the Repetitive Area Header to 30 points (which is approximately 1 cm), in the print it is less than 0.5 cm.
Any help on the above or in general PLD output is appreciated.

Hello,
try to read this following tips (from tip and tricks manual pdf file) :
Business Case:Often times Clients will use the Reference Number field on the AP invoice to store their Vendors invoice number. Their Vendors would like to see this field on the check layout. However, this field does not automatically appear on the check layout. We need to get the data from the Reference Number field to the check layout. Solution: Add a UDF to the Outgoing Payment window. Create a query to assign to the field that we just created. This query will identify the Reference Number for each line item in the Outgoing Payment window. We can then edit the Check Layout to display the Reference Number UDF.
Implementation:
3. The last step is to add the UDF to the check layout via PrintLayout Designer. You will add a Data Field to the Repetitive Area of the check. In the example below the field name that is being added is Exhibit.
You will want to add a Text field to the Repetitive Area Header as well. Finally dont forget to set the modified layout as the default template.
The first implementation I did not write cause I am afraid if the above solution does not suit for you, but if you need it, let me know
Rgds

Document date on check stub

On our check stub the taxdate is used to display the a/p invoice document date on the stub. when we have a credit appearing on the same check some random date from 2007 is shown. How can i have the taxdate appear when it is a credit vs. a/p invoice?
Could i create a formula in PLD?
Thanks

Found additional info in some training material powerpoint:
You can make fields appear only if certain conditions are true. To do this, you first need to build the condition with the help of one calculation field and two operator fields:
The two operator fields are text or data fields. Usually, you want to compare the content of a data field with a fixed value. In this case, you would need the data field and a text field that contains the fixed value.
The calculation field compares the two operator fields with each other with any condition operator (such as greater, less, or equal). The calculation field returns either a 1 if the condition is TRUE or a 0 if the condition is FALSE.
You need to link the print layout field that you want to influence through the condition to the condition field.
To do this, you enter the Unique ID of the condition field into the Link to Field field of the print layout field. If the condition field is equal 1 the linked print layout field will be printed, if the condition field is equal 0 the linked print layout field will not be printed.

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.

On my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

on my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
thatnks

Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

If you are seeing a Red LED, you may have a faulty MagSafe Adapter.
I remember reading that the orange light is produced by a combination of a Red and Green LED. If that's the case, It seems that the adapter isn't lighting the green LED properly at that time.
I would suggest you seek service with your nearest Genius Bar (Apple Retail Store) or Apple Authorised Service Provider as they have access to diagnostics which may assist in isolating any hardware issues you may be experiencing.
Cheers.

I cannot see the Inv total on my check stub when a partial payment is made

On my check stub in SAP B1 (PLD layout) I would like to see the actual invoice total and then what payment was applied separately when a partial payment is made.
Currently the Invoice total shows the same amount being paid when its a partial payment. For example:
invoice total = 125.00
Partial payment made = 100.00
Balance on Invoice = 25.00
On the check stub it shows the 100.00 as the invoice total and 100.00 as the amount paid...
How can I get it to show the 125.00 and then the 100.00? Is there a system variable that will pull in the Invoice total other than the 96 currently used in a PLD? Because that changes when you make the partial payment
Thanks

Max
Can you please take this to:
https://discussions.apple.com/thread/6013229
And answer as many of the questions there as you can?
Thanks,
Peter

AP Credit memo UDF on check stub

Hi, Having a real issue - I am trying to get a UDF from AP credit memos to print on the check stub. When I add a field I cannot select the ORPC table from the database where the UDF is populated. Credit memos appear on the check stub but is there a way to select fields from the credit memo? The same data is readily available from the AP invoice (OPCH).
Thanks

Thanks Gordon, but if ORPC is not available to the check, is there a system variable that I can have users populate on the AP credit memo that could print on the check stub? The idea is to give them a header level field where they could enter a few characters of miscellaneous data to print on the stub. Similar to the vendor reference field.

OneNote file cannot be synced because Check-in Check-Out or Required Properties are enabled in the SharePoint library

Hi All,
As per my requirement, I have a Document Library that's set to YES for "Require documents to be checked out before they can be edited" and i have created a Document Set inside this Document Library.Document set is configured
to create a OneNote document content type within it. When i am creating a OneNote document I am getting below mentioned Error while trying to sync.
This section cannot be synced because Check-in Check-Out or Required Properties are enabled in the SharePoint library. Disable Check-In Check-Out and Required Properties or move this notebook to a different location. (Error code: 0xE000078E)
Is there any settings that i can do without modifying Document Library Settings.
I just try out the information given on below mentioned U, but No Luck.
http://social.technet.microsoft.com/Forums/office/en-US/a0e8cb4e-6daa-4ef8-a856-337da837c5db/sync-error-to-sharepoint-2010-library-with-revisions-checkinout-not-enabled?forum=officeitproprevious
Can anyone of you suggest me the best way to achieve this?
Thanks in Advance!

Have you looked specifically at the Title field? That's a common offender. It might also be worth activating Content Type management on your library, so you can inspect each of the fields in the content type that's being saved too
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Is there any why to check that the reports are functioning well in Webanaly

Hi Experts,
is there any why to check that the reports are functioning well in Webanalysis?
any Help in this issue ASAP is highly appreciated
Kind Regards,
Vam-c

What do you mean by checking whether they are working?
You can always open the report and see whether everything is working ;)
Regards
Celvin
http://www.orahyplabs.com

I can't get more than 2 calendar events to post in the notification center even though I have 10 items checked in the settings area. Any advice?

I can't get more than 2 calendar events to post in the drop down notification center, even though I have 10 checked in the settings area. Any advice?

Same here. I've been searching for a solution but have found nothing.

Preprint AP check - stub/check repetitive area fram size

Similar Messages

Maybe you are looking for