Preprocessing Roadmap Orinial system locked / logon not possible

Hi All,
I am currently working on the upgrade from CRM 2007 to CRM 7.0 with EHP1. I am runinng the synchronus upgrade and currently in the Preprocessing ROADMAP (Phase Name MAIN_SHDIMP/DIFFEXPADDI ).
Indeed, we have completed the SPDD / SPAU modification as well. And my question is, I am not able to login into the orignal system and its telling it as Upgrade is running logon not possible. (But this should happen only in the downtime roadmap - because I have done several ECC upgrade) . When preprocessing completed, we will obtrain downtime from the customer and we will start with the downtime roadmap.
But in CRM, I didn get any message or warning like that, I just gave confirmation for modifcation of SPAU / SPDD in the preprocessing roadmap. After few hours, I am not able to login into the originals system itself. Even I could see that there is no shadow system existing in the MMC as well. I am clueless here about the status and howcome it could happen like this ?
In short : My question is, downtime will start after giving confirmation in SPAU / SPDD?
Also I have unlocked / locked the shadow system earlier for some activity in the shadow system. Does that mean accidentally it locked my original system.
If anyone of your have any suggestion please do let me know
I have used the below command to unlock the shadow system...
tp unlocksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe unlockshd SCR
tp locksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe lockshd SCR
Regards
Vijay

Hi,
However, I have unlocked the same to access the original system. But wondering is the behaviour of the tool itself to lock the original system in the preprocessing stage itself?
Used command for unlockign the orinal system
tp unlocksys SCR pf=G:\usr\sap\trans\bin\TP_DOMAIN_SCR.PFL
Regards
Vijay

Similar Messages

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please Help

Sergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh

Upgrade still running logon not possible

Dear Experts,
We've upgraded our erp server ecc 5.0 to ecc 6.0 ehp1 via option downtime minimized option, before downtime phase we ve taken an offline backup, after upgrade completed succesfully
Now we have used this offline db backup for system copy to a new test system because customer want to save ecc 5.0 system too,
When we try to logon system we are getting following error, we can logon system via sap* user ;
upgrade still running logon not possible
How can we reset this upgrade on this new test system,
Best Regards

Dear Atakan,
Unlock the SAP-system at OS level with the following commands:
cd /<Upgrade-directory>/bin
   ..exe/tp unlocksys <SAPSID> pf=<transport profile>
   ..exe/tp unlock_eu <SAPSID> pf=<transport profile>
but if the copy system still is in the phase before downtime as this was when the backup was made, please following the upgrade guide section, resetting the prepare.
Regards,
Paul

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

System Error- Restart Not Possible

Hi All,
I have Synchronous scenario.
I am trying to handle system error in BPM. so if system error comes i m cancelling process.
So in sxmb_moni, my scenario is successful as it is not getting stuck into queue.
But it is giving me error as "System Error - restart not possible" .
But I need to resend / restart this message again.
So can u please guide me for same
Regards,
Manisha

When your WS id down you are handling the esception in your BPM perfectly....what more you can do is in the exception branch throw an alert to the support team from SAP saying that the processing for a particluar IDOC failed as there was an error while connecting to the end system......in this case you can ask them to restart this particular process once the WS is up....
One option wil also be to increase the default retry attempts of AE while connecting to the end system....affects performance....maximum retry attempts is 10 (if i am not wrong).....so if your WS comes up during this time you can send the message......
We have a similar case wherein same logic has been applied in BPM...which asks the support team to restart the process if the process fails due to a communication error with the end system.
Regards,
Abhishek.

System Error- restart not possible - Error Message in MONI

Hi,
Though my flow is running fine. with success flags, there are couple of below error messages.
System Error- restart not possible
Message ID D59F2131E30E45E21D5BADCC8C0F8656 for pipeline CENTRAL version 000 already exists in system
why am I getting these errors..
Regards,
Varun

What was the status of your server (XI/ PI and the receiving application) at the time of processing of these messages? Also check if the payload was sent with all the required information.
Regards,
Abhishek.

Error - Logon not possible; none of the active logon procedures is possible

Dear Gurus,
I'm trying to configure SSL with User mapping to SICF service: NWBC.
-SSL configured with STRUST transaction and I see that it is working via Internet Explorer
-SICF service NWBC was set to: "Required with Client Certificate (SSL)"
-User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
But I get error:
Logon not possible; none of the active logon procedures is possible
Any idea ?
Please advise,
Dimitry Haritonov

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

SSO logon not possible; logon tickets not activated on the server

When I am on RWB
1) click "component monitoring" ->"display all"
2) click "CCMS"
I get a popup says:
"SSO logon not possible; logon tickets not activated on the server"
I find some threads about this on SDN but they are about
EP. My case is PI7.0SP08.
Please advise how to overcome this issue?
Thanks w/ points.
Message was edited by:
jennifer lee

hI,
do you have the follwoing in our SXMB_ADM if not add them.
SXMB_ADM->IntegrationEngine configuratin-> edit the speicifc configuratin then add the follwoing
Category:RUNTIME Parameters: logging Value:1
If its done. check this alos...whether your browser settings will accept the cookies or not. for SSO logon ticket method you need to have cookies accepted by our browser so check it. in internet page slect TOOLS ->internet options then ckeck for cookies settings.
How to Enable Single-Sign-On for XI 3.0 at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/content.htm
regards
manoj kumar

Active logon not possible

Hi,
A geting this error
Active logon not possible
when i try to logon to SUS using EP.
Regards,
Manu

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

Japanese Langauge Logon not possible

Hello Colleagues
I am working in 4.6 C IDES system.
By default the Language Japanese comes installed.
Even in default profile the parameter entries are maintained.
But still the logon in client 000 is not possible with the Japanese Language.
When we login by a different languge and post the Japanese characters for the
data entry the sytem is not able to identify the Japanese characters.
It reads the japanese Characters as question mark symbol.
I will highly appreciate your help and advise in the problem described above.
Thanks and Regards
Pooja

when i provide the suer ID and password in English and the logon language JA.
I get the error message as;
00:629 J
and whn i double click the red cross i get the error message as
00:127 J
Thanks and Regards
Pooja

Logon not possible (error in license check)

we did a system copy and then the temporary license expired. the permanent license which is installed on the system is valid for the original system so is not working. Due to the expired temporary license we cannot now get onto the system except using SAP*.
To fix the problem we need to delete the expired temporary license and invalid permanent licenses and apply a new license but SAP* is unable to delete old licenses so we cannot apply a new license.
the old OS command of saplicense -delete no longer works for new releases.
checked SAP Note 94998
checked SAP Note 917936
any ideas?

Hi Richard,
First of all OSS note 870871 clearly states that "If the SAP system is set up from a copy of an existing SAP system, you cannot install a temporary license if you did not have such a license before.
Before you work with a copied SAP system, request a license key."
Now that this issue has arisen I think you need to import support package SAPKB70007 as per the OSS note 917936.
Better still raise this issue with SAP as well.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

System start is not possible. Grey screen and demand for restart

After power-on I got a grey screen first, after approx. 15 secondes occurs a message "Restart the system". Unfortunately not more happens if I start the system from the HD. I have installed Mac OS X already new, but altrough the installation was sucessful I got the same result. Additinal I am not able to reject the DVD out of the DVD-drive.

Hi, tojapa - Welcome to Apple Discussions.
You are experiencing kernel panics.
In addition to the troubleshooting possibilities contained in the linked document, I wonder if you have you installed any after-market RAM? (If yes, then take it out and see if that helps.)
Do you have any peripherals beyond keyboard and mouse attached to this machine?
Are you able to boot into safe mode, holding down the Shift key immediately after the startup chime? (If you are able to boot into safe mode, you'll be able to eject the DVD.)
Also, how do you know the reinstallation of the system software was successful? Were you able to start up into the newly installed system?
Tuttle
1611/8319

Trusted RFC and Remote logon not possible due to Nat'd IP addresses

Hi,
We are trying to connect our SolMan 4 to our cusotmers ECC 6 and BI7 systems, the systems are off site and the IP addresses for the customers systems are nat'd when they come in and go out from our Network.
The problem we get is that we cannot set up Trusted systems or Remote Logon to these systems due to issues with the Nating of the IP adresses. We can set up all standard RFC's after adding the the appropriate addresses into the hosts file and they work fine. But the trusted RFC does not set up properly and the BACK rfc from the satelite system does not get set up properly. What appears to happen is that when you try to start a remote session SAP goes to the satelite system and finds the Instance Name and the local IP address rather than the NAT'd IP address and try's to open a session from there. I found this by going into the trusted RFC in SM59 and then going to Extra's, System Information, Target System, this then tells me the Target System information, where it shows the System ID and IP address (which is the incorrect IP address).
Anyone know how we can get the system to try to have the correct IP adress in the target system information so that we can get Remote Logon's to work??
Cheers

Hi Carl,
Based on your explanation about Nating,, how will the RFC determine to connect to Solmans internal IP after it has been directed to the IP for the Router connection.
I feel it is like configuring a jump of RFCs from one IP to another in a single chain.
Can this be done ?? I mean we have to specify an IP in the RFC connection right.. so how will the automatic jumping of IPs be done.
Sorry not answering the question but its very interesting and wanted to know.
Also went trough note # 148832, might help.
Regards,
Kaustubh.
Edited by: Kaustubh Krishna on Aug 13, 2009 12:17 PM

Preprocessing Roadmap Orinial system locked / logon not possible

Similar Messages

Maybe you are looking for