Prequisities for implementing ChaRM

Hi all !
I would like to know what are the prequisities for implementing ChaRM 7.1 in SAP Landscape ECC 6.0 ,and which Sap Note are necessary for this implementation .
Regards

SolMan must be in high availability mode,
Transport Management should be through SolMan,
At the time of DR the ChaRM will be down,
Adequate resource provision must be made for SolMan,
As per OSS the last patch should be deployed - currently it is SP11.

Similar Messages

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

Pre requisites for implementing ChaRM & CTS+

Hi Experts
We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
Thanks in advance
Thanks & Regards

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

ChaRM- Is data scrambling required for Implementing ChaRm in SM?

Hello
Is data scrambling required for the implementation of ChaRM in Solution Manager? Iu2019ve heard that data scrambling is a requirement for CHaRm and if so is there documentation from SAP with the specifics. I do not understand why data needs to be scrambled for transport management.
Thanks!

We are using CHaRM since 2007, and there is no data scrambling for CHaRM itself required. CHaRm is jsut taking control over TMS. It is a process to ensure some quality and to facilitate audit.
Regards,
Holger

Pre-requisites for implementing WMS for an Existing Organization.

Dear Folks,
My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
Are there any pre-requisites to be done before implementing WMS on this organization?
Any help is highly appreciated.
Regards,
Sri

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

CHARM- No task list found for implementation project

Hi All,
I created an implementation project, and created a task list for the implementation project.
But when i create a change request with normal correction, The Task list is not getting displayed.
I am facing a conflict also, When i directly create a correction document without creating a change request. I am getting the task list for implementation project.
Why is it am getting the task list for Implementation project in correction document and not in change request.
When i tried to explore. found that in change request it is getting the list of maintenance cycles(Maintenance projects) and not the tasklist for other type of projects.
Our customized flows are all dependent on the change request. So Is there any configuration i can do to get the task list of implementation project also in the list.
Kindly guide on this issue.
Thanks in advance.
Regards,
Subhashini.

Hi Xavier,
I was also checking that one only.
For the standard transaction type SDCR, it is working perfectly as you toldh when i select development(Implementation).
But the problem is, here we have customized SDCR to ZDCR with our follow up documents.
When i try to include the Code group of implementation(Implmntn), Nothing is happening.
The subject is getting included in the list. but iam getting only the list of maintenance project only.
I have made the changes in copy nsontrol also. but i dont see any difference.
I could not able to trace where exactly i need to do the customizing to bring the list of implementation projects in my change request(ZDCR) when i select the subject( Project-implementation(SDMI))
Kindly advice.
Regards,
Subhashini.

Prequisite for PM

Dear Expert
We are implementing Plant maintenance module in our Company , what are prequisite for PM module , how we is it link with other modules in sap
Regards

Hi
you get everything here about ALM(Plant maintenance module )
https://websmp104.sap-ag.de/eam
regarding Quicksizer click and give the information, you can give details approximately .
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/quicksizer/main.do?bsp-language=en
All the best
regards
nag

Logical systems while implementing charm in solution manager

Hello Everybody,
I just wanted to know how many logical systems we need while implementing charm in solution manager 7.0. I have 3 clients in development , 3 clients in Quality and 1 client in production.
Thank you,
vikram.

Hi Vikram,
Yes, i1n ChaRM we always work with logical systems, I mean clients.
The standard is:
DEV -> QAS -> PRD
However, you can also use:
- Minimum
DEV -> PRD
- Target groups
DEV -> QAS -> PRD
- > TST
DEV -> QA1 -> QA2 -> PRD
DEV -> QA1 -> PR1
-> QA2 -> PR2
There are a lot of combination possible.
BR
Fernando

What are the different options for implementing web security?

Hi,
Right now I am working on an internet website. We are using JSP for presentation and running Weblogic Application Server. I want to know different options for implementing website security. One of the options that I am aware of is to use LDAP. But we donot want to go and buy a LDAP Directory Server now. So I would really appreciate if somebody could let me know my choices here.
Thanks in advance.

Hi,
If you are working on a Windows 2000 platform, the most obvious choice would be Active Directory Server as this is shipped free with Server 2000. It is LDAP compliant, although does have a few differences that set it apart from the other X500 standard based solutions which I will mention in a moment. Details on these differences can be found at http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnactdir/html/msdn_activedirvsnds.asp
Other options are openldap, an open source implementation of an ldap server or iPlanet's Directory Server. If you are initially doing an evaluation, a trial version is available of the iPlanet software and can be downloaded from their site. I found this particularly easy to get to grips with and their is excellent documentation available. There is also an offering from Novell, but I have no experience of this.
Hope this helps.
Jon

Best practice for implementing Manufacturing Cost Planning ( MCP)

is there any best practice for implementing Manufacturing Cost Planning ( MCP) using BI-IP?

Hi:
Both options are viable. If you reverse posting in FB50 then FI GL account postings will also be reversed and along with cost center postings. Hence here advantage is that cost center reversal will be with referenced to the original document with which wrong posting were made. Disadvantage here is that you will to post the entry again in FB50 . In KB11N you will simply transfer cost center amount from wrong to new one that should be in place of it but here you will have no reference . I personally think reversing posting through FB50 is viable options , reverse postings can be seen in KSB1 as well against that cost center.
Regards

Best Practices for Implementing BI7.0

Dear all,
We are currently in BI 3.5 and have planned to go for BI 7.0.I have a few questions
1. Is the BI in Netweaver 2004s is BI7.0?
2. What are the best practices to go for BI 7.0? I found few documents regarding the Best Practices in service.sap.com
3. Where can I find more detailed information and documents for implementing BI7.0?
If you have any document can you please send it to
(yo - no email addresses in here buddy boy)
Thanks & Regards,
Chandran Gansan
Message was edited by: Ron Silberstein

Dear Chandran,
1. Is the BI in Netweaver 2004s is BI7.0?
>> I read some posts before that the correct term should be SAP Netweaver 2004s; Whereas the SAP BW3.5 is referred to SAP Netweaver 2004. I hope I am not mistaken.
2. What are the best practices to go for BI 7.0? I found few documents regarding the Best Practices in service.sap.com
3. Where can I find more detailed information and documents for implementing BI7.0?
>> Since you have access to the SAP service marketplace, kindly check under the categories: bi, bifaq, sevices & implementation.
Hope this helps..
Thanks...

Is licence required for implementing JavaTv and JMF.

Hi,,
I am trying to develop GEM middleware for my STB,
The STB has OS20 as RTOS and implemented on an ST chip
This GEM is DVB MHP minus DVB.
We have to implement JavaTV package and JMF for that,
But do we have to pay any royalty to SUN for implementing the JavaTV or JMF packages or can we implement the binary versions of the packages.
Please letme know how to implement the following packages
org.havic.*
org.davic.*
javax.tv.*
org.dvb.*
and JMF?

Hi Rohit,
let me also add a few words. In principle the process Sales Order Processing B2B with ERP sales order in CRM Web Channel means that you setup (a) Web shop(s) that use and display the CRM product catalog but create orders directly in SAP ERP without first creating them in SAP CRM. It also allows to use certain E-Marketing features of CRM in the Web shop. The CRM product catalog in this process can only be used if you do use the TREX. There is no way of directly call up the catalog from CRM in the Web shop by bypassing the TREX.
In the SAP E-Commerce for SAP ERP solution (ECO ERP) we in contrast offer the possibility to use the ERP catalog without the TREX. In this solution you can use the Memory Catalog which is not using the TREX. This solution by this way allows to directly use and display the ERP catalog and create orders directly in SAP ERP.
For the CRM catalog in contrast we do not have something similar to the Memory Catalog. Instead you DO need to use the TREX to display the CRM catalog in the Web shop.
The only option you have to "avoid" the TREX i a CRM web shop is what Easwar and Christoph have written about: The usage of an external catalog from a 3rd party catalog engine via the Open Catalog Interface (OCI) in the CRM Web shop. This we do offer for the CRM Web shop. However if you do not have an external catalog engine and want to use the CRM catalog then again you do need to use the TREX. It does not matter if you do not want to use product search nor prices other than fro ERP sales order.
Greetings
Torsten Kliesch

Best Practices for Implementing Cryptographic VPN

With Marcin Latosiewicz
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about implementing cryptographic VPN and how to prepare it for the future with expert Marcin Latosiewicz.
Marcin will share his best practices for implementing cryptographic VPN as well as advise those customers who are looking to build a new or update their existing setups how to maximize their potential. Additionally, Marcin will provide insight into which technologies could be applicable for new deployments and exciting new technologies that will be available in the next few months.
Marcin Latosiewicz is a customer support engineer at the Cisco® Technical Assistance Center in Belgium, with more than 6 years of experience with Cisco Security products and technologies including IPsec, VPN, internetworking appliances, network and system security, Internet services, and Cisco networking equipment. Prior to joining Cisco, he operated, administered, and ran UNIX and Microsoft networks for 14 years. Latosiewicz holds bachelors and masters degrees in engineering from Warsaw University of Technology. He also holds CCIE® certification in Security (No. 25784) and CCDP® certification.
Remember to use the rating system to let Marcin know if you've received an adequate response.
Because of the volume expected during this event, Marcin might not be able to answer every question. Remember that you can continue the conversation in the Security community, subcommunity, VPN, shortly after the event. This event lasts through September 20, 2013. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Jouni,
Good question. And answer is complex, there is in depth and there is in depth.
Most people would be satisfied by reading a summary of all the different components - encryption, hashing, signing, PKI, how IPsec and SSL/TLS work. This group also counts most of security CCIEs.
To this extent CCIE Security Study Guide (by Henry Benjamin) was a good read, if a bit outdated today.
Most people who are in depth will look first into specification.
RFC 4301 (IPsec architecture)
RFC 2246 (TLS 1.0)
Are a good start and contain references to other documents worth reading.
This is where the good folks will base their knowledge of off.
The really in depth people will look into the math behind it and will conquer topics like
Elliptic Curve Crypto ( http://en.wikipedia.org/wiki/Elliptic_curve_cryptography ) and difference between CCM, GCM and CCB, to which you have really good materials published by universities.
There are relatively a few who know this.
To start with I can suggest:
- http://www.cl.cam.ac.uk/~rja14/book.html (Ross' Anderson book is free, informative and suprisngly entertaining, this is a definitely a must-read for security/VPN).
- Have a look at books recommended by Richard Bejtlich or Bruce Scheiner - while they might not be VPN specific it's a good security read most of the time.
I'll have a look at the books at home see which one can be interesting to read, and edit this post.
M.

Do we need to install SAP Portal for implementation of ESS & MSS

Hi All,
We are implementing SAP (ECC 6.0) for one of our client, Due to some contractual limitations, we do not want to implement SAP portal though it is a part of standard delivery, I want to know that is it absolutely necessary to install and implement SAP portal for implementation of ESS & MSS.
What i know and understand is that with the new architecture ESS & MSS can be deployed and accessed as a stand alone application on an internet browser by (Web dynpro client) without any need of enterprise portal. While ESS & MSS application can be hosted on Web application server.
Please validate my understanding if it is correct, Also does the new Web dynpro based client support all the functionality and authorization related issues for ESS & MSS ??
Regards
Amit Ajmera

Hi Amit,
Yes, you can run ESS/MSS as WebDynpro application without having to deploy on Portal. However, the look and feel and user accessibility is much better when deployed as Portal page. For WebDynpro, you will still need to publish the individual URL link to application somewhere...
Another point is that on portal you can deploy standard Business package specific to ESS and MSS which contains lots of readymade iviews/page/roles etc so it can reduce your development cost dramatically.
But, at the end it all depends on your individual requirement and project scope.
Cheers !!
Satya.
PS: Points always encourage me to reply...:-)

Is KM ,TREX is must For implementation of CRM business package?

Hi all,
Is KM ,TREX installation   is must For implementation of CRM business package on EP?
regards
Rajendra

Rajendra,
As you probably already have checked on portal content studio, this business package is functionally identical to the Business Package for CRM 50.2. The only difference is the addition of more languages that are not supported by EP 5.0.
System Availability
Primary Backend System
SAP - CRM 4.0
Portal Release
EP 6.0 (SP2 and higher), NetWeaver '04 (SP Stack 03 and higher), NetWeaver 2004s (SP Stack 04 and higher)
Other Prerequisites:
SAP BW 3.1 + CONT 3.20
R/3 4.6C (and higher), Plugin 2003.1
SEM 3.5
iView Runtime Technology:
Java / HTMLB (WAS 6.20 and higher), BSP iView on WAS, BW iView (BW 3.20 and higher)
Languages
English, French, German, Italian, Portuguese, Spanish, Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Norwegian, Polish, Russian, Slowakian, Swedish, Thai, Turkish
James

Prequisities for implementing ChaRM

Similar Messages

Maybe you are looking for