Prerequisite confirmation for patch 3480000

Hello All,
Following are Prerequisite for patch 3480000.
This patch requires additional prerequisite patches to have been successfully
applied to your system before it can be applied. These prerequisite patches,
as at the time that this patch was built, are listed below. Please check
Oracle Metalink to determine if any of these have been superseded
4337683 - Minipack 11i.AD.I.2
For patch 4337683 the note is following.
Note: The most recent replacement for this patch is 5161676. If you are downloading patchset 4337683 because it is a prerequisite for another patch or patchset, you should verify whether or not 5161676 is suitable as a substitute prerequisite before downloading it.
So I am preparing for patch 3480000 so can you tell me.
Should I go for patch 4337683 before I apply 3480000 ?
OR
Should I go for patch 5161676 before I apply 3480000 ?
Reg
Chirag Patel

Any of the patches will do the job. Patch 5161676 is the most recent patch and it contains lots of new and changed features which do not exist in patch 4337683. So, even if you apply patch 4337683, the patch 3480000, you would still need to apply patch 5161676 later.
I suggest you save time and do the following:
- Apply patch 5161676 - 11i AD.I.5
- Apply patch 3480000 - 11.5.10.2 Maintenance Pack
For more details about applying patch 5161676, please refer to Note: 233044.1 - About Oracle Applications DBA Minipack 11i.AD.I
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233044.1

Similar Messages

  • Work failed while applying the patch 3480000

    Dear All,
    Please Help
    At the phase of applying the patch 3480000 while upgrading from 11.58 to 11.5.10.2
    workers failed:
    FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
    Time is: Tue Apr 05 2011 06:30:13
    ATTENTION: All workers either have failed or are waiting:
    FAILED: file WFXLoad.class on worker 1.
    FAILED: file WFXLoad.class on worker 2.
    FAILED: file WFXLoad.class on worker 3.
    FAILED: file WFXLoad.class on worker 4.
    FAILED: file WFXLoad.class on worker 5.
    FAILED: file WFXLoad.class on worker 6.
    FAILED: file WFXLoad.class on worker 7.
    FAILED: file WFXLoad.class on worker 8.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.

    Hi Hussein,
    Sorry for being late
    next is output screen for patch 3480000
    There are now 39641 jobs remaining (current phase=A84):
    6 running, 216 ready to run and 39419 waiting.
    Assigned: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
    Assigned: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 4 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 1 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 3 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 6 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 2 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
    FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
    ATTENTION: All workers either have failed or are waiting:
    FAILED: file WFXLoad.class on worker 1.
    FAILED: file WFXLoad.class on worker 2.
    FAILED: file WFXLoad.class on worker 3.
    FAILED: file WFXLoad.class on worker 4.
    FAILED: file WFXLoad.class on worker 5.
    FAILED: file WFXLoad.class on worker 6.
    FAILED: file WFXLoad.class on worker 7.
    FAILED: file WFXLoad.class on worker 8.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    next is last lines in adworker log file
    adjava -mx256m -nojit oracle.apps.fnd.wf.WFXLoad -u &un_apps &pw_apps &jdbc_db_addr &jdbc_protocol US &fullpath_cln_patch/115/xml/US_cln2a12os.wfx
    Error:
    Program exited with status 1
    Cause: The program terminated, returning status code 1.
    Action: Check your installation manual for the meaning of this code on this operating system.
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 11.5.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "h:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\rt.jar;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\i18n.jar;h:\oracle\prodcomn\java\appsborg.zip;h:\oracle\prodora\8.0.6\forms60\java;h:\oracle\prodcomn\java"
    Calling h:\oracle\prodora\8.0.6\jdk\bin\java.exe ...
    Oracle Workflow XML Loader 2.6.2
    Connecting to APPS@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD))) -- UTF8
    Connected to (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD)))
    SQL Exception encountered during upload: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'UPLOADOBJECT'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Fatal error encountered during upload between line 10 and 35
    Error encountered when upload.
    AD Run Java Command is complete.
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Apr 05 2011 06:30:13
    Thanks&BR
    Tarek

  • Confirmation for Service Order

    Hi Gurus,
    How to create follow-up document of Confirmation for a service order in IC Agent role
    Thanks,Sarat

    You could use the left navigation bar to go to service confirmation tab and just click create on service confirmations, the prerequisite is you must be on the service order from which u want to create Confirmation, this will link up all the transactions your interaction record
    Second way of doing it, is click on followup document from service order to create service confirmation prerequisite here is that you must have the configuration ready for creating follow up documents
    Thanks
    Raj

  • During patch 3480000   iebsvclvl.ldt

    Dear All
    I am in the process of installing Patch 3480000 (11.5.10.2) and now worker failed
    FAILED: file iebsvclvl.ldt on worker 5
    and this is last part from log file for worker 5 :
    H:\oracle\prodappl\fnd\11.5.0\bin\FNDLOAD.exe &ui_apps 0 Y UPLOAD @IEB:patch/115/import/iebsvclvl.lct @IEB:patch/115/import/US/iebsvclvl.ldt
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.
    Log filename : H:\oracle\prodappl\admin\PROD\log\l218942.req
    Please any help
    BR
    Tarek

    Hi Hussein,
    this all details
    Application Object Library: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    module:
    Current system time is 30-APR-2011 20:23:17
    Uploading from the data file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt
    Altering database NLS_LANGUAGE environment to AMERICAN
    Dump from LCT/LDT files (H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0), H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt) to stage tables
    Dump LCT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0) into FND_SEED_STAGE_CONFIG
    Dump LDT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt into FND_SEED_STAGE_ENTITY
    Dumped the batch (IEB_SERVICE_LEVELS 1008 , IEB_SERVICE_LEVELS 1000 ) into FND_SEED_STAGE_ENTITY
    Upload from stage tables
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1008, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1003, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1006, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1001, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1009, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1004, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1007, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1002, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1005, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1000, ORA-06508: PL/SQL: could not find program unit being called
    Concurrent request completed
    Current system time is 30-APR-2011 20:23:17
    Thanks
    Tarek

  • During patch 3480000 iebsvclvl.ldt  again

    Dear All
    I am in the process of installing Patch 3480000 (11.5.10.2) and now worker failed iebsvclvl.ldt after restart the patch for second time
    FYI : in the first time the issue according to note_id:ID 467991.1 solved by copile the package (alter package FND_DESCR_FLEX_CONTEXTS_PKG compile body;) but when rerun the patch for
    second time and compile this package
    the same worker still failed
    and following is last part of log file
    H:\oracle\prodappl\fnd\11.5.0\bin\FNDLOAD.exe &ui_apps 0 Y UPLOAD @IEB:patch/115/import/iebsvclvl.lct @IEB:patch/115/import/US/iebsvclvl.ldt
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.
    Log filename : H:\oracle\prodappl\admin\PROD\log\l224529.req
    Report filename : H:\oracle\prodappl\admin\PROD\out\o224529.out
    AD Worker error:
    The above program failed with error code 3.
    See the AD Worker log file and/or the program log file for details
    and following is last part from l224529.req
    Uploading from the data file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt
    Altering database NLS_LANGUAGE environment to AMERICAN
    Dump from LCT/LDT files (H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0), H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt) to stage tables
    Dump LCT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0) into FND_SEED_STAGE_CONFIG
    Dump LDT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt into FND_SEED_STAGE_ENTITY
    Dumped the batch (IEB_SERVICE_LEVELS 1008 , IEB_SERVICE_LEVELS 1000 ) into FND_SEED_STAGE_ENTITY
    Upload from stage tables
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1008, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1003, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1006, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1001, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1009, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1004, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1007, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1002, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1005, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1000, ORA-06508: PL/SQL: could not find program unit being called
    Please any help
    BR
    Tarek

    Hi
    Q: I am applying patch can I open another session and run adadmin ? (Thanks to Amit Pancholia for pointing this out)
    A: Yes & No (depends on stage of patching), you can run adadmin if FND_INSTALL_PROCESSES is NOT locked (in use) by adpatch session. If this table is in use by adpatch session then you can’t run adadmin at same time.
    Referance:
    http://onlineappsdba.com/index.php/2008/09/10/interview-questions-for-oracle-apps-dbas-11ir12-part-9/
    Regard
    Helios

  • Patch 3480000 install - Failed worker  FndXdfCmp  Index *  doees not exist

    Dear All
    I am in the process of installing Patch 3480000 (11.5.10.2) and during the running workers 1 failed with "FndXdfCmp"
    the full command is_
    adjava -mx256m -Xrs -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_okc_patch/115/xdf_TEMP_15049
    80.xdf &fullpath_fnd_patch/115/xdf_xsl index_category=large parallel_index_threshold=20000
    and the error is_
    Table Name is TEMP_1504980
    Table exists in the target database
    Checking for differences
    Number of columns for the table in the xml file is 3
    The table in the Xml file and in the target database match
    Index hashcode(s) extracted from the XDF.
    Hashcodes generated for DB indexes.
    Index TEMP_1504980_N1 does not exist in APPS. <---------------------------------------------------------------------------------
    Skipping the creation of index TEMP_1504980_N1 in current mode.
    Thanks&BR
    Tarek

    Please see the suggested solutions in these docs.
    Errors on FndXdfCmp.class : "ORA-03113: end-of-file on communication channel" and "FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist" [ID 577534.1]
    Unable To Create The Primary Key Constraint [ID 828990.1]
    ICX_TRANSACTIONS.xdf Failed to Create Index ICX_TRANSACTIONS_U1 While Applying Patch 6435000 [ID 1081195.1]
    Thanks,
    Hussein

  • Patch 3480000 install - Failed worker because of GL locking

    I am in the process of installing Patch 3480000 (11.5.10.2) and during the running workers fail on sql scripts under the GL schema. Checking the log they are failing because the account is locked(timed), however if I unlock it and run again it locks the account again.
    All the other ones have been running as they should (I have had to reset a couple from EXPIRED(GRACE) to proceed however). Is the password saved incorrectly somewhere? If I change it does that hose things up for everything else or is there something else I can check for this?
    (glxlatxd.sql & glqtposd.sql are the two failing if it matters)
    Thanks
    Edited by: Toolman21 on Jan 22, 2010 3:30 PM

    If I drop the sequence and create it again with the higher values as they are trying to alter it to, I assume that would fix it however I also assume that it would mess up some number or something somewhere in the program which is of course bad.
    I have continued to search metalink and the internet and can not find anything relating to oracle patches and that error or that error and oracle app sever in general.
    I have logged an SR with Oracle but any advice that you (or anyone) have would be appreciated.
    This is the more complete error text
    The sequence PV_SEARCH_ATTR_VALUES_S in the database is defined as:
    MINVALUE = 1 MAXVALUE = 2000000000 INCREMENT BY = 1
    CYCLE = NO ORDER = NO CACHE = 20
    which should be defined as:
    MINVALUE = 10000 MAXVALUE = 2000000000 INCREMENT BY = 1
    CYCLE = YES ORDER = NO CACHE = 1000
    +(Note: The cache value for sequence PV_SEARCH_ATTR_VALUES_S is 100000 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)+
    Alter the sequence with :
    Start time for statement below is: Mon Jan 25 2010 14:47:32
    ALTER SEQUENCE PV.PV_SEARCH_ATTR_VALUES_S MINVALUE 10000 CYCLE CACHE 1000
    AD Worker error:
    The following ORACLE error:
    ORA-04007: MINVALUE cannot be made to exceed the current value
    occurred while executing the SQL statement:
    ALTER SEQUENCE PV.PV_SEARCH_ATTR_VALUES_S MINVALUE 10000 CYCLE CACHE 1000
    AD Worker error:
    Unable to compare or correct sequences
    +     because of the error above+
    Time when worker failed: Mon Jan 25 2010 14:47:32
    Thanks again
    Edited by: Toolman21 on Jan 25, 2010 2:23 PM

  • Patch 3480000 install - Failed worker   ALTER SEQUENCE

    Dear All,
    I am in the process of installing Patch 3480000 (11.5.10.2) and during the running workers 1,3 fail and this the part of worker 1 log :
    The sequence IEM_ACCOUNT_TAG_KEYS_S1 in the database is defined as:
    MINVALUE = 1 MAXVALUE = 2000000000 INCREMENT BY = 1
    CYCLE = NO ORDER = NO CACHE = 20
    which should be defined as:
    MINVALUE = 10000 MAXVALUE = 2000000000 INCREMENT BY = 1
    CYCLE = NO ORDER = NO CACHE = 20
    Alter the sequence with :
    Start time for statement below is: Fri Apr 29 2011 14:51:14
    ALTER SEQUENCE IEM.IEM_ACCOUNT_TAG_KEYS_S1 MINVALUE 10000
    AD Worker error:
    The following ORACLE error:
    ORA-04007: MINVALUE cannot be made to exceed the current value
    occurred while executing the SQL statement:
    ALTER SEQUENCE IEM.IEM_ACCOUNT_TAG_KEYS_S1 MINVALUE 10000
    AD Worker error:
    Unable to compare or correct sequences
    *     because of the error above*
    Thanks&BR
    Tarek

    Hussein
    _ this  I did:_*
    **SQL> select IEM.IEM_TAG_KEYS_S1 .nextval from dual;**
    **NEXTVAL**
    **10001**
    **SQL> alter sequence IEM.IEM_TAG_KEYS_S1 increment by 1000;**
    **Sequence altered.**
    **SQL>**
    and this part from screen out put:_+
    **ATTENTION: All workers either have failed or are waiting:**
    **FAILED: file iemsvrp.odf on worker 1.**
    **ATTENTION: Please fix the above failed worker(s) so the manager can continue.**
    **Fixed: file iemsvrp.odf on worker 1 for product iem username IEM.**
    **Restarted: file iemsvrp.odf on worker 1 for product iem username IEM.**
    **FAILED: file iemsvrp.odf on worker 1 for product iem username IEM.**
    **ATTENTION: All workers either have failed or are waiting:**
    **FAILED: file iemsvrp.odf on worker 1.**
    **ATTENTION: Please fix the above failed worker(s) so the manager can continue.**
    and this from log file:+_
    **The sequence IEM_ENCRYPTED_TAG_DTLS_S1 in the database is defined as:**
    **MINVALUE = 1 MAXVALUE = 2000000000 INCREMENT BY = 1**
    **CYCLE = NO ORDER = NO CACHE = 20**
    **which should be defined as:**
    **MINVALUE = 10000 MAXVALUE = 2000000000 INCREMENT BY = 1**
    **CYCLE = NO ORDER = NO CACHE = 20**
    **Alter the sequence with :**
    **Start time for statement below is: Fri Apr 29 2011 17:10:15**
    **ALTER SEQUENCE IEM.IEM_ENCRYPTED_TAG_DTLS_S1 MINVALUE 10000**
    **AD Worker error:**
    **The following ORACLE error:**
    **ORA-04007: MINVALUE cannot be made to exceed the current value**
    **occurred while executing the SQL statement:**
    **ALTER SEQUENCE IEM.IEM_ENCRYPTED_TAG_DTLS_S1 MINVALUE 10000**
    **AD Worker error:**
    **Unable to compare or correct sequences**
    **     because of the error above**
    Thanks hussein
    please advise
    Tarek
    Edited by: user11973469 on Apr 29, 2011 5:17 PM
    Edited by: user11973469 on Apr 29, 2011 5:18 PM

  • Worker failed with patch 3480000

    Dear All,
    Please worker failed during patch 3480000 as following:
    H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
    Please advise
    Tarek

    Hussein,
    Following is part of worker log file:
    Time when worker completed job: Fri May 20 2011 09:50:06
    Evaluating symbolic arguments ....
    Done evaluating symbolic arguments.
    Time when worker started job: Fri May 20 2011 09:50:06
    Start time for file is: Fri May 20 2011 09:50:06
    H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
    AD Worker error:
    The above program failed with error code 3.
    See the AD Worker log file and/or the program log file for details
    Thanks,
    Tarek

  • Patch 3480000 install hangs

    Dear All
    I am in the process of installing Patch 3480000 (11.5.10.2) and now all workers displayed in "Running" status with command "adctrl" but Windows task manager doesn't display any activity running so now all patch is hanging
    and the screen output for the patch is:
    Writing dependencies of jobs to run to appldep.txt file...
    There are now 95392 jobs remaining (current phase=A0):
    0 running, 139 ready to run and 95253 waiting.
    Reading completed jobs from restart file (if any).
    There are now 49650 jobs remaining (current phase=A55):
    0 running, 5686 ready to run and 43964 waiting.
    FYI the job which should be run now is "adtasktim.sql"
    Please advise how I can do

    Thanks
    After two shutdown ans start for application,database and Windows then patch running
    BR
    Tarek

  • SOLMAN_SETUP - DIAGNOSTICS Prerequisites fails for BI_CONT

    Hi,
    We have installed a new Solman 7.0 EHP1 (with new SR1 DVD/media) and then updated it to SP27. SP27 patching has been done with the SPS stack - and this has automatically installed/updated new component ST-BCO and updated BI_CONT to 706 SP1.
    During Post Installation configuration, under SOLMAN_SETUP, we have observed that "DIAGNOSTICS Prerequisites" step is failing with the message
    Component BI_CONT: release 706 is incorrect, expected 704: see note 1274287
    Component BI_CONT: SP level 0001 is incorrect, expected 6
    As per SAP note 1274287, our system meets minimum system requirements for BI_CONT.
    But not for ST-BCO as minimum requirements is - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
    My questions are:
    Any idea why the Diagnostics Prerequisites are still failing.
    I can't find this patch anywhere in sap service marketplaceso any idea from where to download this.
    Appreciate your views on this asap, please.
    BR
    Davinder

    Appreciate your quick response. Following the recommeded Note -- solves my first problem - wow.. Thanks again for this.
    Will really appreciate if you can clarify on my second query also, please-
    "Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27" - our system meets all the prerequisites, except for the component ST-BCO - our system has ST-BCO 400 SP0.
    But requirement is to have Support Packages 1 (SAPK-40001INSTBCO).... which i am not able to find out from SAP Service marketplace,
    Any idea how this can be downloaded, please
    Requirements with component ST400 for SP27
        o  Solman 7.0 SP27 ABAP-Stack:
           -  Support Package Stack 08 for SAP WEB AS 7.01 AS ABAP
           -  Support Package 08 for PI_BASIS 701 (SAPK-70108INPIBASIS)
           -  Support Package 08 for SAP_ABA 701 (SAPKA70108)
           -  Support Package 08 for SAP_BASIS 701 (SAPKB70108)
           -  Support Package 08 for SAP_BW 701 (SAPKW70108)
           -  Support Package 19 for CPRXRPM 400 (SAPK-40019INCPRXRPM)
           -  Support Package 22 for SAP_AP 700(SAPKNA702)
           -  Support Package 18 for BBPCRM 500 (SAPKU50018)
           -  Support Package 07 for CRMUIF 500 (SAPK-50007INCRMUIF)
           -  Support Package 01 for BI_CONT 706 (SAPK-70601INBICONT ?)
           -  Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
           -  Support Package 27 for ST 400 (SAPKITL437)
           -  Support Package 04 for ST-PI 2008_1_700 (SAPKITLRD4)
           -  Support Package 00 for ST-A/PI 01N_700SOL (SAPK-01NS2INSSA)
           -  Minimum Support Package 24 for ST-ICO 150_700 (SAPK-1507OINSTPL)
           -  Minimum Support Package 07 for ST-SER 701_2010_1 (SAPKITLOS7)
    BR
    Davinder

  • Need component to raise message to automatically confirm the patch

    Hi,
    We have our DVM Scoping Session scheduled with SAP ,for this I have to upload some patches in SOLMAN, but while  confirming the  patches from SOLMAN it is giving an error "error during call of SAP backend system".I read SAP note number
    982045 and accordingly found that our OSS password is correctly maintained still this error.I have raised a customer message to SAP for this.
    In the mean time can anyone tell me the component via which I can raise a message to SAP to release the patch,
    so that it can be downloaded from the download basket.I googled but couldn't find.
    This would be a great help.
    Regards,
    Edited by: Pramod Gurjar on Mar 31, 2010 8:39 AM

    Got it.
    It is SV-SMG-MAI-APR
    Regards,

  • Automatic TO creation and confirmation for a Material document

    Hi Dear All,
    i am new to MM andWM.
    I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
    SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
    Double click on ‘control data ‘tab
    Hear for my warehouse I given input like   Auto TO = ‘1’,
                                                                             AddId = ‘select check box’.
    And in ‘Assign control’ tab for 101 movement type I have given input like below.
    Automatic TO = ‘1’.
    TO item can be confirmed immed. = ‘tick checkbox’
    Propose Confirmation = ‘tick checkbox’.
    Foreground/Backgrnd = ‘D’.
    After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like ‘TO processing finished: TR total:   17, TO created:    0, Errors:   17’.
    If I check header details of transfer requirements in LB03, i am not seeing ‘Tick Mark’ in Auto TO Creation field.
    Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
    Thanks in Advance..

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

  • No maintenance plan has been confirmed for Order 000004024181; Follow-up ca

    Hi
    I try to close a list of preventive order (initiated by maintenance plan) from the transaction IW38 but the system displays the following error message
    "No maintenance plan has been confirmed for Order 000004024181; Follow-up call exists
    Message no. IW597"
    thank you for your help

    Hi,
    You mean close -
    >TECO???
    If yes Go in IW38 select all orders  ,click Enviroment Tab and you can do the TECO but that order should not have Open reservation.
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Aug 26, 2010 1:02 PM

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

Maybe you are looking for