Prerequisite to enable Profiling for posture assessment to check the AV, Patches, OS update

Hi Experts,
I have wireless set-up with two SSID , one is used for corporate users with dot1x auth and other one for guest using CWA .
I understood that , i do not need to buy any license or pay to cisco for Wireless license however i want to understand for enabling profiling for posture assessment .
I understood that I need have advance license for posture assessment however I am looking out for information about costing to buy advance license and is there any prereuisite to configure posture assessment other than additional license?

There were a few changes in ISE v1.3:
- Base License = The same
- Plus License = The same (with some more features)
- Advanced License = Apex
- Wireless = Mobility (Now it includes VPN based authentications as well)
So your plan is to run the new version of ISE (1.3) and AnyConnect 4 then you will need to have:
 - ISE Mobility License (Includes Base, Plus and Apex for wireless and VPN)
 - AnyConnect APEX license - This one is on the honer system and it is not installed on ISE
If you plan to use posture on wired as well then instead of the "mobility" license you will need to get:
 - ISE Base
 - ISE Plus
 - ISE Apex
 - AnyConnect Apex
Thank you for rating helpful posts!

Similar Messages

  • I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true

    I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true. The only way to make the inbox on the iphone back to 0 is to delete the account then re install it.
    Anyone have any ideas

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • When trying to install a digital copy, everything works including the downloading, until it is processing to iTunes then I receive "You do not have enough access privilages for this operation. Check the disk to make sure it is clean and retry." error.

    When trying to install a digital copy, everything works including the downloading, until it is processing to iTunes then I receive "You do not have enough access privilages for this operation. Check the disk to make sure it is clean and retry." error.
    Tryed several times, Same Results. Tryied rebooting, logging out & into iTunes, Same Result. Seems to do this error with every digital copy, but works eventually. But now will not post digital copy to my iTunes at all. Just same error over and over.
    Any Thoughts??

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • Looking for a command to check the filling level of the ASIC netwflow table on Cat3850

    Hello.
    I am searching for a command to check the filling level of the flexible netflow table in the ASIC of the Cat3850.
    There is a show command on the FNF Cache which shows me any entry numbers but this values is confusing me.
    The Cat3850 is able to have 16K egress and 8K ingress FNF table entries according to the FNF guide.
    But the show command gives me a value of >33k.
    Does anyone have an explanation on this?
    How can I check the real filling Level of the FNF table in the ASIC?
    Thank you very much
    Karl
    show flow monitor Solarwinds-OUT cache
      Cache type:                               Normal (Platform cache)
      Cache size:                              Unknown
      Current entries:                           33256
      Flows added:                              626755
      Flows aged:                               560235
        - Active timeout      (    60 secs)     410932
        - Inactive timeout    (    15 secs)     149303

    myle wrote:I don't want a solution with GUI because my laptop is 6 years old.
    I completely agree with all the above and I only use mutt.  But I use mutt because I *prefer* cli apps.
    If you're just going with cli because you don't think your computer can handle gui apps ... then I don't think you've given the lightweight gui apps a fair shake.
    Yes, evolution and thunderbird would suck on an old computer (but IMHO they suck on a new one too![1]).
    Claws (or/aka sylpheed) is a nice little mail app that should work nicely on any computer that is running X.  I'm sure there are other lightweight gui mail apps to.
    Again, I love mutt.  But I don't think having an old computer is the reason to favor mutt over a good gui app if you would otherwise prefer the latter.
    [1]:  Not meant as a flame, rather an expression of my preference for software that does one thing and does it well.  These tools both, while they may be well written, try to do so much that I have never been pleased with the outcome.
    Last edited by Trilby (2012-08-14 11:57:35)

  • Enabling Profiling for deployments via the REST API

    We have an application which is being deployed via the REST API. Our logging has captured some errors related to memory consumption that we'd like to examine using profiling. All the examples of profiling in Azure that I can find discuss deployment via Visual
    Studio which is not feasible in this instance.
    Is there a way to enable profiling via the REST API and if so are there any examples or documentation for this? We're using Linq2Azure to access the APIs but we can extend it if necessary.
    Thanks
    Colin

    Hi,
    Yes, we can choose enable profiling when we publish an application via visual studio, from my experience, this feature was provided by using the Visual Studio profiler, if we didn’t use visual studio to deploy the application, it is hard to enable profiling.
    Refer to
    http://msdn.microsoft.com/en-us/library/windowsazure/hh369930.aspx#BK_ProfilingCloudService for more information.
    Best Regards

  • My iphone 3gs wont connect to my carrier , it has been like this for 2 days have checked the sim in another phone and the sims fine

    My iphone 3 gs has just suddenly stopped connecting to my carrier. it has been like this for 2 days. Have checked the sim in another phone and the sim is ok. any ideas anyone.  Also how do i reset my phone without losing my info?

    Settings>General>Resets>Reset Network Settings.
    Try that first.

  • When creating a custom default user profile for an image, I get the error "A keychain cannot be found to store "safari" when a new user logs in for the first time.

    My "profile" account works flawlessly with the exception of safari. I had copied the entire user template folder to the default location in OS X 10.10 and removed the entire keychain folder. However, whenever someone logs into the computer for the first time and opens Safari, they are greeted with the error message "A keychain cannot be found to store safari".

    If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
    At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
    Back up all data before proceeding.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Keychains
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
    Back in Keychain Access, select 
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

  • How do I enable hibernation mode?!  Have checked the resources out there, no clue still...

    So,
    I noticed, when I went home for Thanksgiving, that my computer was no longer going into hibernation mode on battery.  So I entered "pmset -g" into terminal, to determine what the issue was, and these are my results:
    standbydelay         4200
    standby              0
    womp                 0
    halfdim              1
    hibernatefile        /var/vm/sleepimage
    sms                  1
    networkoversleep     0
    disksleep            10
    sleep                120 (sleep prevented by iTunes, coreaudiod)
    autopoweroffdelay    14400
    hibernatemode        3
    autopoweroff         1
    ttyskeepawake        1
    displaysleep         15
    acwake               0
    lidwake              1
    I know that standbydelay is the delay for battery sleep, until it goes into hibernation mode.  Since I have hibernatemode 3 enabled, it should be fine.  However, standby shows a 0 next to it, suggesting to me that hibernation mode has been turned off somehow.  I see that autopoweroff (which is the hibernation mode for when the machine is plugged in), shows a 1 next to it, signifying that it is enabled.  And...like I would expect seeing these results, my computer hibernates fine after 14,400 seconds when plugged in...yet does not go into hibernation mode EVER when on battery.
    How do I turn hibernation mode on for when the computer is on battery?  There is a 0 there, so there must be a terminal command to enable/disable it.  Not sure how it got jacked up?  It's kind of annoying, because it should be entering sleep mode after 4200 seconds to save me battery.
    running a mid 2012 non-retina MBP, 10.9.
    Thanks!

    By what the terminal is telling me is that iTunes is blocking the change. So you would have to disable iTUnes and then activate Hibernation to be able to do this. However I would hesitate in doing this because iTunes is a very active program that downloads tunes to your computer 24-7 because of all those that are free and downloaded to all subscribers.

  • Safari 5.1.7 for Windows, Can I get the Adobe Flash Player Update???

    I just downloaded Safari 5.1.7 for Windows 7 and when I went to the YouTube page, it says that there is a missing plug-in and when I try to find a video, it shows this:
    When I try to update the flash player, it only update my IE 9 and Google Chrome. I also have the lastest version of QuickTime and still doesn't work.

    Thanks for the suggestion - removing my adblock and reinstalling the
    flashplayer solved the problem, working fine now with new adblock which
    will go bye-bye before I do the next update (not a fan of resorting to
    swearing at my screen!)
    On Wed, Mar 25, 2015 at 8:54 PM, Jeromie Clark <[email protected]>

  • Enhancement for MB01 - Need to check the document before post

    Hi All,
    I need to check a material document before posting in MB01 for a field "GR/GI Slip No" which we are using to enter "gate entry no".The issue now is as i'm using a table control screen to post GRs in bulk . i want to avoid duplicate GRs of a particular gate entry.during analysis i found that an exit/Badi at MB01 - end  may serve my purpose well.
    thanks and regards,
    sachin soni

    Hi,
    You may try the EXIT:
    MBCF0005  Material document item for goods receipt/issue slip
    or BADIs:
    MB_BAPI_GOODSMVT_CREATE
    MB_BATCH_MASTER
    MB_DOCUMENT_BADI
    Regards,
    Renjith Michael.

  • HT204070 my new Ipod touch 5 won't accept the password to my wifi.  I've been trying for an hour. retyping, checking the password on the router and retyping again.  can someone help?

    the new Ipod touch 5 will not accept the password that is on the router for my wifi.  what do I do? there don't seem to be any options and I cannot connect to our Wifi in our home

    I agree with the Thomas, in that I think you have mucked up your settings in the AOL account. Your username should be something like - [email protected] Your password is whatever you use as the password.
    You could try deleting the account and start over again. Here is a link to a "how to set up AOL email " on the iPad. It is  4 or 5 step process and just make sure that you are entering the correct information in the correct fields in the set up. Among my 4 email accounts on my iPad, I have 2 AOL accounts. I have no problems at  all and it was really very easy to set up. There is no reason why AOL email should not work on your iPad.
    To repeat and emphasize - Just make sure that you are entering the correct information in the appropriate fields as I think that's where you are making your mistakes.
    If I had my choice, I would probably chuck the AOL accounts as well, but I have all the spam filters set as high as I can on the server, and it has cut down tremendously on the spam. Unfortunately - we set up AOL accounts at my workplace years ago and I really hesitate to change them now, so I continue on with these, but like I said, they work fine and they were very easy to set up.
    http://convert-dvd-ipad.com/dvdipad/set-aol-email-account-ipad-manually/

  • Autofill enabled, still doesn't complete, also checked the suggest history/bookmarks (websites under bookmarks don't show)

    About:config -->
    browser.urlbar.* all set to default
    browser.urlbar.autoFill
    browser.urlbar.autoFill.typed both set to true.
    Firefox --> Options --> Privacy
    History is set to not remember
    Location bar is set to suggest history & bookmarks
    Example: I've got www.gogoanime.com and I type in the address bar www. or gogo no autofill is started, only a dropdown window for autocomplete.

    hello firefoxuser1993, per default firefox does only auto-complete entries in the url bar that you have once typed in manually & since you have switched off history, this information is not available. you could either change your privacy settings to allow your browsing history to be remembered or you could change ''browser.urlbar.autoFill.typed'' to false, so that autocomplete works at least for bookmarked entries.

  • I was able to download Lion for free. I checked the App Store and it says Lion was installed. I'm not sure how to make it work, though. Nothing popped up when it was completed, it just says "Installed". How do I get it to work?

    I shut down my computer and restarted it, but nothing happened.

    Look inthe Applications folder and run Install Mac OS X Lion app.

  • Guest Posture Assessment for MAC OSX

    Hi
    I need to perform posture assessment for guest users who own MAC OSX machines , but i couldn't find Webagent available for Mac Osx just regular NAC_AGENT for MAC, so i need to know if it's supported ?
    thanx

    Mac OS X Agent need to be used for posture assessment and remediation
    http://www.cisco.com/c/en/us/td/docs/security/nac/appliance/configuration_guide/47/cam/47cam-book/m_webagt.html#wp1556106

  • ISE 1.2 Posture Assessment with AnyConnect Client

    Hi Experts,
    I need clarity for posture assessment with AnyConnect client. I understood that we had traditional NAC agent with ISE 1.1.
    Since new Anyconnect version 4 has come which is used for ISE 1.3 posture assessment however I am not sure if I can use Anyconnect 4 with ISE 1.2 ?  Can you please put light on this ?
    if not , do I need to upgrade to ISE 1.3 ? what is the process to upgrade to ISE 1.3 ?
    Thanks in advance

    ISE can provision clients with agent and configure agent profiles.You have Client-provisioning policies that enable users to download and install resources on client devices.(Windows and Mac OS X NAC Agents, Cisco NAC Web Agent.

Maybe you are looking for