Prerequisites for OS service pack upgrade from SAP end.

Hi All,
I Have AIX 5.3 OS at TL 08 and Service pack 1 level JS 23 and JS12 blades.
IBM wants to upgrade it to TL 8 SP7 as the IBM centre supports TL8 SP7 for AIX 5.3 JS23 Blade.
So we are planning to go ahead with SP enhancement to SP7 from SP1. Are there any pre-requisites from SAP end for upgrading the same.
Regards,
Priya

Check
Note 1119631 - Using SAP systems with AIX 5.3
for possible problem/issues with different TLs.
Also check with your database vendor if the target level is supported.
Markus

Similar Messages

  • Planning for Mobile Service Pack Upgrade from 2007 SP2 to SP6

    Hello Mobile Gurus,
    We are planning for upgrading mobile from 2007 SP2 to SP6. Can anyone of you guess a time line for achieving this?
    I mean, how long will it take in dev env to upgrade commstation, mrs, mdw etc. apart from upgrading the field laptops?
    thanks

    Hello Mahesh
    had missed 5th point. ie Rollout to the client laptops . the amount of time it takes will be based on the kind of customization and kind of issues that you face in your application . etc.
    Repostiroy upgrade from n to n+1 release will take approx 1-2 hours (with out additinal language) and it is correct.
    I have given you the rough estimates so that you will get a fair idea how much time it is going to take.
    Best Regards
    Shankar

  • Mail attachment problem after service pack upgrade from 11 to 17 ECC 6.0

    Dear All,
    My mailing programs have started sending .dat file instead of .xls file. Earlier it used to go properly in .xls format.
    I'm using SO_NEW_DOCUMENT_ATT_SEND_API1 fm for mailing.
    Thanks.
    Edited by: User on Mar 7, 2011 12:37 PM

    After 6.10 and higher version,  SAP recommends not to use the FM SO_NEW_DOCUMENT_ATT_SEND_API1. The issue could be because of that. check with the SAP note 190699

  • SAP for Professional Services pack

    Hi Guru's,
    Please provide me the information on the following
    1)      Can we install SAP for Professional Services pack on a running ECC 6 system?
    2)      What is the Impact on existing ECC 6 on this installation?
    3)      What are the perquisites for Installing SAP for Professional Services?
    4)      Integration with Microsoft EPM server possible? To which extent?
    5)      Is SAP for Professional Services is available in any SAP Enhancement Package for ECC 6?
    Regards,
    Ravi Duggirala

    Hi Ravi the following are my answers to your points:
    1) Can we install SAP for Professional Services pack on a running ECC 6 system?
    Yes
    2) What is the Impact on existing ECC 6 on this installation?
    No impact on the existing set up. We have to add cProjects suite with ECC 6.0.
    3) What are the perquisites for Installing SAP for Professional Services?
    If you are looking for full IS-Professional Services then you need CRM, ECC, cProjects and BW. If your organization is into NPD and if you have critical mass in resources then you can go for xRPM also.
    4) Integration with Microsoft EPM server possible? To which extent?
    I don't know exactly what is EPM?
    5) Is SAP for Professional Services is available in any SAP Enhancement Package for ECC 6?
    ECC 6.0 service pack 11 will have some part of modules specified above. But CRM and BW are seperate modules, which needs to be installed seperately.
    You can award points if at all this info helps you.
    Apart from can you eloborate on your requirement. I can help you if at all you are interested.
    Regards
    Suresh. J

  • Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

    Hi,
    I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
    If yes, could you forward some links so as to know how.
    Thanks,
    Fariha

    hi,
    >>>>Is that Possible..?
    yes
    >>>Wont there be any additional configuration needed ?
    if you use IDOCs then you don't need anything special
    Regards,
    michal

  • Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

    Hi
    We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
    1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
    2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
    3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
    Thanks
    anu

    Hi Anu,
    1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
    2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
    3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
    Thanks,
    Sneha

  • Impact of enhancing standard infotypes on service pack upgrade

    Hi SAP experts,
    I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
    P.S : The support pack was not applied to the system in which the std infotype was enhanced.
    Regards,
    Sameena

    You should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
    I think you would be fine as IT14 isn't updated often in SP's.
    Cheers,
    Brad

  • How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

    Hi Experts,
      I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
    GRC 10.0 only work on NW7.02,we now have NW7.01. 
      How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
    Use EHPI tools or just spam/saint  or any other way ?
    current version:
    SAP_ABA 701 0006 SAPKA70106
    SAP_BASIS  701 0006 SAPKB70106
    PI_BASIS 701 0006 SAPK-70106INPIBASIS
    SAP_01 0006 BW SAPKW70106
    Thanks!

    HI,
    Net wevaer 7.2 CE is totally different from Net weaver 7.01.
    No relation i feel.kindly check the links.
    http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
    http://help.sap.com/content/documentation/netweaver/index.htm
                      OR
    You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
    You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
    Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
    Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
    *Regards,
    Ajitabh

  • BI Activities in Service Pack Upgrade

    Hi,
    We are upgrading all the systems to the next service pack. Presently BI is on Netweaver Stack 12 and application stack 14. Basis is planning to upgrade the Netweaver stack to 17 and application stack to 19. As part of this upgrade project they would need the activities which can be planned from BI side. Can any one help me to identify the activities need to be planned from BI side during and after the service pack upgrade. Based on this I would need to prepare the estimates for the activities.
    Regards
    Vijay

    No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
    SP installation checks for locked files, it would suggest to stop identified services manually.
    You don't need to do before hand.

  • Impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI

    Hi Friends,
    I would like to know that what is the impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI software.
    1) Will there be anything we need to change?
                for e.g.
                     a) Settings
                     b) Software
                     c) Hardware
    2) What do we need to keep in mind when upgrading from SAP CRM Interaction Center 4.0 to 5.0?

    Hello!
    The biggest change you must face is related to Java. If you had CRM4.0 Java configuration, you must change your settings to the non-java configuration CRM5.0 has. Most of those changes are performed by the upgrade program, but you must activate services in transaction SCIF.
    Your other concerns:
    - Software: Most of the Genesys releases are compatible with both java and non java configurations. Anyway, I am sure Genesys has compatibility instructions.
    - Hardware: No changes to my knowledge
    <b>Hope it helps. Please, reward points if so</b>
    Regards
    Joaquin

  • Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

    Hello,
    This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
    While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
    All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
    I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
    But these are not working for compnay code & sales area data.
    please let me know if anyone has faced this type of problem / found any solution on this.
    Best Regards,
    Shubhada

    SAP IMG  -> Cross Application Components -> Master Data Synchronization &#61664; Synchronization Control -> Synchronization Control -> Activate Synchronization options
    This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
    Suggested Values:
    Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
    Source Object: BP | Target Object: VENDOR | Active Indicator : X
    Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
    Source Object: VENDOR | Target Object: BP | Active Indicator : X
    Have you set all of the above settings??
    BHARATH

  • Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • Error Using the SQL Server 2000 Driver for JDBC Service Pack 3

    Hi,
    I�m using the SQL Server 2000 Driver for JDBC Service Pack 3. The connection is succesfully, but when I use de statement.executequery() method, there is the follow exception:
    java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'PEC_COUNTRY'.
    This is my code:
    ResultSet resultSet;
    Statement statement;
    Connection connection;
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
    connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://S0MALMUERTA:1433;user=sa;password=");
    statement = connection.createStatement();
    resultSet = statement.executeQuery("SELECT COY_INX, COY_NAME, COY_ICO FROM PEC_COUNTRY
    ");When I make the last instruction, occurs the above exception
    Thanks in advance
    Luija

    The way you are connecting, the default database used will be 'master' and i guess that the table PEC_COUNTRY was defined in another database.
    If it is the case you need to specify the database name.
    connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://S0MALMUERTA:1433;DatabaseName=yourdb;user=sa;password=");

  • Audigy 4 asking for XP Service Pack 2 CD, no such th

    When installing Audigy 4, the software asks to put in the Windows XP Service Pack 2 CD. Of course there is no such CD as this PC came with Service Pack and was on line updated to Service Pack 2. The installation won't complete and continues to reinstall.
    The actual message is "Some files on Windows XP Professional Service pack 2 CD are needed". This is very disappointing.

    freesky wrote:
    Here's the direct download for the Windows XP Service Pack 2 from microsoft. Just to make sure you have it installed, download it and install it.Windows XP Service Pack 2 Network Installation Package for IT Professionals and Developershttp://www.microsoft.com/downloads/d...DisplayLang=en
    I'm I'm failing to communicate here... I DO have it already installed. So, if it is already installed on my HD, why does the Creative CD prompt me for the service pack CD ???

Maybe you are looking for