Prerequisities for a km project

hi,
can anyone tell the pre-requisites for doing a km project?i mean the tools that have to be installed and their configurations.also if possinble please send any useful links regarding this.
thanx
srinath

Hi Srinath,
   You need to install:
   Java 1.4.x not use 1.5. in each developer machine.
   SAP Developer Studio, you need to download and install in each developer machine.
   Form Builder, is part of portal.
   Visual Composer, you need to download and install.
This is all the tools, perhaps you don't need to use them.
SAP Developer Studio and Visual Composer can be downloaded from:
http://service.sap.com/instguides
http://service.sap.com/swdc
http://help.sap.com
if you need to develop this link is very useful
Knowledge Management and Collaboration (KMC)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b30b090-0201-0010-829d-e988d093ac65
Patricio.
   Patricio.

Similar Messages

Prerequisites for creating a project in primavera

Hi Guys,
I want to create a project in P6V7 what are the prerequisites that i need to creating a project.
Thanx,
Ra

Hi
i'll consider that you implement security in P6 before adding projects
you need to do the following before creating projects
1- Create OBS
A global hierarchy that represents the managers responsible for the projects in your organization. The OBS usually reflects the management structure of your organization, from top-level personnel down through the various levels constituting your business. The OBS can be role-based or name-based.
2- Create EPS
A hierarchy that represents the breakdown of projects in the organization. Nodes at the highest, or root, level might represent divisions within your company, project phases, site locations, or other major groupings that meet the needs of your organization, while projects always represent the lowest level of the hierarchy. Every project in the organization must be included in an EPS node.
3- add projects to EPS

Prerequisites for SAP CRM

Dear Friends,
I need your valuable suggestions. Briefly, about my background. I have over 13years of IT experience on Mainframes with Insurance domain(Auto, Home, Commercial etc.,). Currently working as Project Manager. I am planning jump onto SAP Ladder. Based on my little research I think SAP CRM and SAP SCM are doing/picking very good in market. Please advise, what's the prerequisites for both courses. I appreciate your help.
Prerequisites for SAP SCM?
Prerequisites for SAP CRM?
Thanks,
Ramesh

Hi Saumya
Thanks for your response, but we are into CRM 5.0 and using IC Webclient application for Call Center.
I have seen the first link before, and if you could refer some documentation relevant IC Weblcient CTI integration, it would be a great help to me.
And the questions I raised are to get the clear understanding before going to the huge documentation. I prefer to receive simple and straight solutions to my concerns.
Your points will be highly appreciated
Best regards
Sravanthi
Edited by: Sravanthi_Revella on Jun 2, 2009 8:34 AM

OS prerequisites for 12c Agent Push

Hello all,
The project is to install 12101 cloud control and then use the push methodology to install various agents. I am preparing the initial preparation for this.
Need your suggestion/tips on: "what are the OS prerequisites for 12c agent push?"
am aware of few:
1. enable 'oracle' user to be able to sudo (or 'su'?) to root in order to run the root.sh script -- this is a preq in the deployment page.
--- what happen if I am not able to manage OS folks that 'oracle' can sudo to root during the time of install? In this scenario, can I ask OS folks to run root.sh?
--- do we really need to run root.sh for agent push? I ran many silent agent install in 11g OEM, but it doesn't ask me to run root.sh..
2. Firewall - ports etc ?
What else?
Regards,lily

Hi Lily,
1. If you do not have privileges, you can ask any OS folks to execute this root.sh.
root.sh will set additional permissions.
2. You can follow the document provided below to check on the complete pre-reqs for agent install.
http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#BABCFEGE
Best Regards,
Venkat

Resp Person Tab is not coming in CJ20N for a particular project type

Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol Pareek

Hey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol

Issue in SOA Suite Installation - prerequisite for AIA 3.0 Installation

We are facing an issue in SOA Suite Installation which is prerequisite for AIA 3.0 Installation. As per AIA 3.0 Installation Guide, the Web Logic Server version to be used is “Web Logic Server 11g R1 10.3.1“ for Linux86 32bit Version.
After Installation of SOA Suite on Linux Environment, the em console page is not opening.
Error Message :
<Feb 1, 2010 5:21:50 PM IST> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Feb 1, 2010 5:21:50 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optionalpackage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.soa.fabric, Specification-Version: 11.1.1, Implementation-Version: 11.1.1, referenced from: /app/oracle/weblogic/user_projects/domains/SOADomain/servers/soa_server1/tmp/_WL_user/worklistapp/r8n7fr]. Make sure the referenced optional package has beendeployed as a library.>
<Feb 1, 2010 5:21:50 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'worklistapp' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
We have faced such issue during SOA 11g Installation on Windows Operating System, and installed latest version of Web logic Server and the issue was resolved.
Can AIA Linux Installable work on Web Logic Server 11g R1 10.3.2?
If any one has faced similar issues, Kindly provide inputs.

The same person has reported issues on further steps i.e. AIA Installation. Hence closing this

Pause / Resume button combination not working when set to display for "rest of project"

Good day,
I have created a set of four objects on slide2 of my project
1. Smart Object rounded rectangle with text "(playing) - CLICK to Pause" [this is the graphic the user sees]
2. Smart Object rounded rectangle with text "(paused) - CLICK to Resume" [this is the graphic the user sees]
3. Smart Object rectangle, transparent, used as button, set to not display in project - btn_Resume
4. Smart Object rectangle, transparent, used as button - btn_Pause
A. Script assigned to btn_Pause hides btn_Pause and the "CLICK to Pause" graphic, shows the btn_Resume and "CLICK to Resume" graphic, and pauses the project by setting the system pause variable to 1
B. Script assigned to btn_Resume hides btn_Resume and the "CLICK to Resume" graphic, shows the btn_Pause and "CLICK to Pause" graphic, and resumes the project by setting the system resume variable to 1
C. All items are set to display from the beginning of slide2 for the "rest of project"
On slide 2, the buttons hide/show and pause/resume behaviors work correctly.
On slide 3, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors (show/hide/pause) occur until a good amount of time into the slide: you can click all you want for 20-30 seconds, but nothing works except the click sound. Eventually, the behavior will work.
On slides 4 and following, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors EVER work.
If the behaviors NEVER, EVER worked, I would keep looking for what I did not have set correctly, but the correct working on the slide where they are set, delayed behavior on the next, and no behavior on the remainder of slides following has me stumped.
Captivate version 6.0.1.240
Windows 7 OS
I hope I'm missing something obvious here, and I'm more than willing to face-palm if you tell me . Otherwise, I have not been able to find any setting that makes any difference. I would REALLY rather not duplicate the buttons and scripts on every page of the project. Given the blog posts I have seen saying this method should work just fine, I'm hoping there is a side quirk somewhere that I'm missing.
Thanks for any help you can give.

Without clouding with too much explanation, this technique arose out of a need to deal with (in a different project) objects that were grouped, and wanting to deal with the groups in as simple a way as possible, allow for easy swapping of group assets, and having a few buttons do multiple things. The idea of being able to have multiple interactive buttons stacked on top of each other while appearing for the rest of the project led to trying this simple construct before trying something more complex.
You are correct, that there is a simpler solution, which we ended up using because we were not able to get two interactive buttons stacked on top of each other while displayed for the rest of the project to work properly (although that is SUPPOSED to work, as far as I understand).
Here's what we ended up doing:
A) Two smartshapes used as messaging graphics
B) A single (one) interactive smartshape used as a button
C) A conditional action to pause/resume and show/hide the appropriate messaging graphics
D) All three objects (A&B) stacked, B on top.
E) All objects set to always appear on top, and to display for rest of project.
Our hypothesis, then, is that you are not able to stack interactive objects on top of each other and then display for the rest of the project.
If anyone has evidence to the contrary, we would, gladly, take a look.
Thanks for your interest Lilybiri, and for your input.
Best regards,
Hank

High Memory utilization for a single project

Hi All,
I am facing one issue with one of the projects configured. We have endeca installed on a Windows server and there are multiple projects setup. I am observing that dgraph.exe for a single project is taking as much as 80% of memory on server. I do see that the project is receiving around 300 to 350 requests every day which is slightly higher than other projects. I am required to manually restart the project before business starts and that releases the memory. I am not able to identify whats causing this issue. Any ideas on how to troubleshoot the issue?
Any suggestions will be of great help..
Thank You,
Sunil

The number of threads will not have any impact on memory usage, however, I agree with Saleh that this doesn't make any sense.
I would suggest the following:
Grab the stats page XML (http://[your server name]:[your port]/admin?op=stats).
Restart the dgraph and see how much memory is taken up on the initial load. Then, assuming the memory consumption is reasonable, issue a couple N=0, N=something queries to the index and track what's happening with how much memory is being taken up.
If you're still at a normal level, it seems like there must be some process or "bad query" that causes the memory to spike. A possible culprit might be found on the "most expensive queries" section of the stats page but it's possible it won't be there as that only tracks queries that have completed, not queries that are still in process or taking forever.
The only other explanation I can think of is a rogue "bulk export" query where a user is trying to (for example) export the entire index to excel or something like that. Does your application offer that functionality?
Regards,
Patrick Rafferty
Branchbird

Error : PRC: Generate Draft Revenue for a Single Project

Dear all,
I'm using Project using Cost / Cost as revenue accrual/Billing method
and I try to Generate Draft Revenue but I have a problem
Please suggest what could be wrong.
Log file :
Projects: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PARGDR_SINGLE module: PRC: Generate Draft Revenue for a Single Project
Current system time is 29-JUL-2009 11:15:45
Entering parmai()
...Connected to Oracle
Accrue Thru date from Command line is : 2009/08/02 00:00:00
project:35 delete:N regenerate:Y acc_thru_dt:02-Aug-09
start project: end project:
Revenue is running in Normal revenue mode
Revenue is not based on specific project type...
Revenue is not based on specific organization...
Revenue is not based on specific customer...
Revenue is not based on specific Agreement...
Revenue is running for MCB/Non MCB projects...
Revenue is running for release revenue mode...
Revenue is not creating the detail report ...
Revenue Processing Parameter List
=================================
-------------- < parameter list > -----------------------
Accru Through Date ----------------------------------------> 02-Aug-09
Project ID ------------------------------------------------> 35
From Project Number --------------------------------------->
To Project Number ----------------------------------------->
Adjusting Revenue Run -------------------------------------> No
Project Type ID -----------------------------------------> 0
Organization ID ------------------------------------------> 0
Customer ID ----------------------------------------------> 0
Agreement ID ----------------------------------------------> 0
Multi Currency Projects -----------------------------------> No
Release Draft Revenue -------------------------------------> Yes
Include Detail Report -------------------------------------> No
-------------- < End of parameter list > -----------------------
...Request ID = 804880
This concurrent request is not being rescheduled
Current system time is 29-JUL-2009 11:15:45
...about to delete revenue for project id 35
...0 draft revenues deleted
Current system time is 29-JUL-2009 11:15:45
...about to process adjustments
SELECT p.project_id, p.segment1,
p.distribution_rule, p.project_level_funding_flag,p.project_currency_code,
p.project_bil_rate_date_code,
p.project_bil_rate_type,
p.project_bil_rate_date,
p.project_bil_exchange_rate,
p.projfunc_currency_code,
p.projfunc_bil_rate_date_code,
p.projfunc_bil_rate_type,
p.projfunc_bil_rate_date,
p.projfunc_bil_exchange_rate,
p.revproc_currency_code,
p.funding_rate_date_code,
p.funding_rate_type,
p.funding_rate_date,
p.funding_exchange_rate,
p.multi_currency_billing_flag,
p.assign_precedes_task
FROM pa_projects p, pa_project_types t
WHERE p.project_id = :project_id
AND pa_project_utils.check_prj_stus_action_allowed(p.project_status_code,'GENERATE_REV') = 'Y'
AND :start_project_number||'x' != :end_project_number||'y'
AND p.project_type = t.project_type
AND t.project_type_class_code = 'CONTRACT'
AND EXISTS (SELECT /*+ INDEX(pf pa_summary_project_fundings_u1)*/ NULL
FROM pa_summary_project_fundings pf
WHERE pf.project_id = p.project_id
AND nvl(pf.revproc_baselined_amount, 0) != 0)
AND NOT EXISTS
(SELECT NULL
FROM pa_draft_revenues r2
WHERE r2.project_id = p.project_id
AND r2.released_date||'' is null
AND r2.generation_error_flag||'' = decode(:mass_gen,
1, 'Y', r2.generation_error_flag)
AND (EXISTS (SELECT NULL
FROM pa_expenditure_items_all i
WHERE i.project_id = p.project_id
AND i.cost_distributed_flag ||''= 'Y'
AND i.revenue_distributed_flag = 'N'
AND i.expenditure_item_date
<= NVL(TO_DATE(:acc_thru_dt),sysdate)
AND EXISTS (SELECT /*+ LEADING(l)*/ NULL
FROM     pa_draft_revenues r, pa_cust_rev_dist_lines l
WHERE r.project_id = i.project_id
AND      ((l.expenditure_item_id = i.adjusted_expenditure_item_id AND i.adjusted_expenditure_item_id is not null )
OR (l.expenditure_item_id = i.expenditure_item_id))
AND      NVL(l.reversed_flag,'N') = 'N'
AND      l.line_num_reversed IS NULL
AND      r.project_id = l.project_id
AND      r.draft_revenue_num = l.draft_revenue_num
AND (r.released_date||'' is not null
OR r.generation_error_flag||'' = decode(:mass_gen,
1, 'N', 'E')))
union all
SELECT /*+ LEADING(v)*/NULL
FROM pa_events v
WHERE v.project_id = p.project_id
AND ((v.revenue_distributed_flag = 'N'
AND v.completion_date
<= NVL(TO_DATE(:acc_thru_dt),sysdate))
OR (substr(p.distribution_rule,1,4) = 'COST'
AND v.revenue_distributed_flag = 'Y'
AND v.completion_date
> TO_DATE(NVL('02-Aug-09', sysdate))))
AND (DECODE(NVL(v.bill_trans_rev_amount, 0), 0 ,
DECODE(NVL(v.zero_revenue_amount_flag, 'N'), 'Y', 1, 0),1) = 1)
AND NVL(revenue_hold_flag, 'N') = 'N'
AND EXISTS (
SELECT NULL
FROM pa_tasks t
WHERE v.task_id is not NULL
AND t.ready_to_distribute_flag = 'Y'
AND v.task_id = t.task_id
UNION ALL
SELECT NULL
FROM pa_tasks t1
WHERE v.task_id is NULL
AND t1.ready_to_distribute_flag = 'Y'
AND v.project_id = t1.project_id )
AND Exists (select null from pa_draft_revenues r,pa_cust_event_rev_dist_lines l
where l.project_id = v.project_id
AND ( l.task_id = v.task_id OR v.task_id is NULL )
AND l.event_num = v.event_num
AND NVL(l.reversed_flag,'N') = 'N'
AND l.line_num_reversed IS NULL
AND r.project_id = v.project_id
AND r.draft_revenue_num = l.draft_revenue_num
AND (r.released_date||'' is not null
OR r.generation_error_flag||'' = decode(:mass_gen,
1, 'N', 'E')))
union all
SELECT /*+ USE_CONCAT */ NULL
FROM PA_Billing_Extensions be, PA_Billing_Assignments bea
WHERE bea.active_flag = 'Y'
AND bea.billing_extension_id = be.billing_extension_id
AND (bea.project_id = p.project_id
OR bea.project_type = p.project_type
OR bea.distribution_rule = p.distribution_rule)
AND be.calling_process in ('Revenue','Both')
AND nvl(be.call_after_adj_flag, 'N') = 'Y'
AND be.trx_independent_flag = 'Y'))
Current system time is 29-JUL-2009 11:15:45
...0 projects processed for adjustments
Current system time is 29-JUL-2009 11:15:45
...about to generate revenue for project id 35
...Fetching next project
Current system time is 29-JUL-2009 11:15:45
...about to call pa_billing.bill_ext_driver( 35, 'Revenue', 'PRE', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:45
...exiting pa_billing.bill_ext_driver( 35, 'Revenue', 'PRE', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:45
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
...Else loop 1
...else loop 2
...else loop 4
...else loop 5
...non_zero_amount
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
Leaving pauoarchn()
...Else loop 1
...else loop 2
...else loop 4
...else loop 5
...non_zero_amount
Leaving pauoarchn()
Leaving pauoarchn()
Current system time is 29-JUL-2009 11:15:48
...generated revenue for project id 35, number DP700150.01
...about to call pa_billing.bill_ext_driver( 35, 'Revenue', 'REG', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:48
...exiting pa_billing.bill_ext_driver( 35, 'Revenue', 'REG', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:49
List of error messages for project id 35 for Revenue at location REG
Procedure Name Message B Assgn Id Task Id
pa_billing_pub.inse Create a default event type for this Bi 1
Current system time is 29-JUL-2009 11:15:49
...generated revenue for automatic events for project id 35, number DP700150.01 calling loc REG
...about to call pa_billing.bill_ext_driver( 35, 'Revenue', 'POST-REG', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:49
...exiting pa_billing.bill_ext_driver( 35, 'Revenue', 'POST-REG', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:49
Current system time is 29-JUL-2009 11:15:49
...generated revenue for automatic events for project id 35, number DP700150.01 calling loc POST-REG
...about to call pa_billing.bill_ext_driver( 35, 'Revenue', 'POST', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:49
...exiting pa_billing.bill_ext_driver( 35, 'Revenue', 'POST', '02-Aug-09', 804880 )
Current system time is 29-JUL-2009 11:15:49
...Fetching next project
Current system time is 29-JUL-2009 11:15:49
Current system time is 29-JUL-2009 11:15:49
...about to call AutoAccounting
Current system time is 29-JUL-2009 11:15:49
Current system time is 29-JUL-2009 11:15:49
Current system time is 29-JUL-2009 11:15:49
Current system time is 29-JUL-2009 11:15:49
Warning in Flex Validation for line '35:353:1:1'
Null GL# 50269 key flexfield is not allowed
Warning in Flex Validation for line '35:353:2:1'
Null GL# 50269 key flexfield is not allowed
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
...returned from AutoAccounting
...about to update pe_expenditures_all for intercompany processing
Current system time is 29-JUL-2009 11:15:50
Entering parddl()
...setting error codes and bad code combination id to null
... Update draft revenues for marking autoaccounting error if any
Current system time is 29-JUL-2009 11:15:50
1 rows updated.
... Update draft revenues without generation error to normal state
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_cust_event_rev_dist_lines for setting bad CCID to null
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_events for marking AutoAccounting error if any
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_events for setting revenue_distributed_flag to 'N'
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_cust_rev_dist_lines for setting bad CCID to null
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_expenditure_items_all for marking AutoAccounting error if any
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
... Update pa_expenditure_items_all for setting revenue_distributed_flag to 'N'
Current system time is 29-JUL-2009 11:15:50
0 rows updated.
Leaving parddl()
Current system time is 29-JUL-2009 11:15:50
Current system time is 29-JUL-2009 11:15:50
0 rows updated with Generation error due to ccid=-1
Current system time is 29-JUL-2009 11:15:50
0 rows updated with Generation error PA_REV_GEN_ERROR
Current system time is 29-JUL-2009 11:15:50
...1 projects processed for revenue generation
Current system time is 29-JUL-2009 11:15:50
...about to update proj summary funding amounts
executing pa_billing.check_spf_amounts('B',35, , ) Calling check_spf_amounts...Inside the Single projects If
Current system time is 29-JUL-2009 11:15:50
...about to generate reports
Current system time is 29-JUL-2009 11:15:50
...completed generating reports
Process completed.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 804880
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-JUL-2009 11:15:50
---------------------------------------------------------------------------

Hi Dina, thx for your response
I have error "Rejection Error : Auto Accouting Error"
There is Output :
Project Num Revenue(Credited) Customer Agreement Rejection Reason
DP700150.01 1 NOKIA SI( 1058) PKS-01/NSN/09 AutoAccounting Error

Can you set a Cost Rate Table to be used for an entire project

In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment. In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level?
Thanks.

Hi melduncan,
Welcome to this Microsoft Project forum:)
I assume you want project to have a default cost rate, so why not set the cost rate details into A to begin with, You could then set this as a template from which you initiate all your new projects see FAQ
Item: 8. New Project Template. FAQs, companion products and other useful Project information can be seen at this web address: http://project.mvps.org/faqs.htm
Hope this helps - please let us know how you get on :)
Mike Glen
MS Project MVP
See
http://tinyurl.com/2xbhc for my free Project Tutorials
"" wrote in message
news:[email protected]...
In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment. In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level?
Thanks.

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

How to create a .jar file for the BPEL project

hi all,
how can i create a .jar file for my BPEL project, i am trying to deploy the project but getting an error :
"Error: [Error ORABPEL-10902]: compilation failed [Description]: in "C:\OraBPELPM\integration\jdev\jdev\mywork\Workspace_BPELDemo\BPEL_Report\BPEL_Report.bpel", XML parsing failed because "". [Potential fix]: n/a. "
and when doubel cliking on this error Jdev take me to the beginning of the ".bpel" file.
I 'm really stuck in here i am not able to deploy the process!
Thanks,
Rana

Rana:
If you haven't already, I would post this question in the BPEL forum. I would expect a much better turnaround there.
Johnny Lee

Should we really go for bean data controls for a new project?

Hi,
I am still new data controls and trying to figure out the advantages of using bean data controls for our new project. Our UI is going to have customized UI components and our back end is going to be a tcp/ip server.
Is it a good idea to develop java beans and then create data controls to bind to UI layer? I think it makes sense to use data controls if we want to use existing java beans. Maybe we would be separating the model layer by using data controls, but only thing it would be doing for us would be the simple object calls to my java beans. Would it be better to use data controls or use I choose to make object calls?
Thanks,
Manoj

Hi,
the POJO data control will always give you a benefit and develope productivity, unless what you have to build fits on a single page - in which case you may not mind the burdon of manual UI component binding
Frank

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tks

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

Remaining questions while evaluating JavaFX for a new project

Dear forum members:
currently I am evaluating the possibilities of next-generation GUI technologies, such as JavaFX, Silverlight and Flash/Flex, for a new project. To get a basic understanding of JavaFX's concepts, I worked through the available online text and video tutorials, and all the treated topics seem quite obvious/comprehensible to me +as long as one is only confronted to relatively static GUI component hierarchies+. But, as a newbie, some questions concerning more dynamically defined GUIs (i.e. dynamic JFX scripting*) still remain.
Application scenario (exemplary):
Say I want to create a "Online Shopping Application" that supports "+ShopOwners+" in *dynamically* defining the "+Shop Model+" structure, e.g. accepted visitor (client) categories, product categories their products, pricing information, payment methods, etc.
Then, based on the dynamically defined model, the shop owner should be able to design and layout the necessary forms, such as order forms, survey/feedback forms, etc. This should be done in "design mode", and there should also exist a possibility for him/her to preview the specification results in a "preview mode".
Finally, the shop owner must be able to save the model and forms on the server side in a way that can requested and run be the shopping app end users (the shop clients) via (another (?)) JavaFX frontend.
_The still remaining questions for this scenario are:_
+1. Is JavaFX appropriate for creating such kind of applications, especially when it comes to dynamic JFX scripting (and compilation) on the client side??? (By now I'm not quite sure if this is really necessary for my plans!)+
+2. Concerning the ShopOwner's GUI with its design and preview mode (and knowing that the latter mode will be the GUI version presented to the shop clients in another JFX module):+
+Is it possible to *dynamically *build up a +Scene Graph+ in a way that lets me handle and *compile* the corresponding +JFX Script+ on the client side for previewing it? Or is a client-server roundtrip absolutely necessary?
How could one persist this JFX Script on the server side? I.e., which intermediary format would be the most appropriate? => XML, JSON, JFX Script?
3. Concerning the "Shop Model", would I optimally create JFX classes or even Java Beans to bind to?
4. And finally: What would be your recommended way (software architecture) to fulfill this task in JavaFX?
Do there already exist some JFX components (dynamic forms/survey authoring modules, etc.) that persue a similar task and that I didn't find yet?
As the clarification of the above-mentioned issues are very important for me, I hope that you more experienced users can help me, pointing me to a practicable approach.
Thank you very much for any help and constructive tips in advance.
Best regards
Martin Meyers

Q1: Do I optimally need 2 different custom components for each treated concept, or do I have just 1 component with 2 internal modes (design & preview/usage)??
E.g., (a) FormSpec widget composed of LabelSpec, TextBoxSpec, ChooseBoxSpec,... widgets each having their preview pendants
Form, Label, TextBox, ChooseBox, etc.
versus
+(b) only Form widget composed of Label, TextBox, ChooseBox widgets, but all having a "design/preview execution mode".+
Closer to (b), I think, though each widget doesn't need to be modified to have design and preview modes. Instead, each widget can be wrapped within a Group to provide the design/preview functions without modifying the widget itself.
The technique is as follows. Given a sequence of widgets (Nodes, really), for each widget, wrap it in a Group that contains that widget but with an overlay Rectangle in front of it. The Rectangle can be semi-transparent, or fully transparent if you prefer. (In the example below I've made it a semitransparent color to make its location obvious as well as to provide a highlight that signals design mode.) The overlay Rectangle is set up so that its dimensions will exactly track the dimensions (bounds) of the widget behind it. I've set blocksMouse to true so that when it's present, the overlay traps events and prevents interaction with the widget. There is a boolean variable previewMode, controlled by a CheckBox, that controls the visibility of these overlay rectangles. I've also added a bit of code to track mouse events on the overlay rectangles so that you can move the widgets around when you're in design mode.
Note that the visible variable differs from transparent, i.e. opacity == 0.0. If a node is visible but is transparent, it is still eligible to receive events; whereas if visible is false, it does not receive events.
Here's some code that illustrates this technique. I'll answer your other questions in a subsequent post.
import javafx.stage.Stage;
import javafx.scene.*;
import javafx.scene.control.*;
import javafx.scene.input.*;
import javafx.scene.layout.*;
import javafx.scene.shape.Rectangle;
import javafx.scene.paint.Color;
var previewMode = true;
var lastX:Number;
var lastY:Number;
function wrap(n:Node):Node {
    Group {
        content: [
            n,
            Rectangle {
                opacity: 0.2
                fill: Color.web("#ffff00")
                x: bind n.boundsInParent.minX
                y: bind n.boundsInParent.minY
                width: bind n.boundsInParent.width
                height: bind n.boundsInParent.height
                visible: bind previewMode
                blocksMouse: true
                onMousePressed: function(me:MouseEvent) {
                    lastX = me.x;
                    lastY = me.y;
                onMouseDragged: function(me:MouseEvent) {
                    n.layoutX += me.x - lastX;
                    n.layoutY += me.y - lastY;
                    lastX = me.x;
                    lastY = me.y;
var controlList:Node[] = [
    Button {
        layoutX: 140
        layoutY: 20
        text: "Button1"
        action: function() { println("Button1 clicked!"); }
    Slider {
        layoutX: 30
        layoutY: 60
        min: 0
        max: 100
        override var value on replace {
            println("Slider value is now {value}");
    Label {
        layoutX: 50
        layoutY: 100
        text: "Non-interactive label"
    CheckBox {
        layoutX: 40
        layoutY: 140
        text: "CheckBox"
        override var selected on replace {
            println("CheckBox is now {if (selected) "checked" else "unchecked"}");
Stage {
    title: "Design vs Preview Mode"
    width: 400
    height: 250
    scene: Scene {
        content: [
            CheckBox {
                layoutX: 10
                layoutY: 10
                text: "Preview Mode"
                selected: bind previewMode with inverse
            Panel {
                content: for (n in controlList) {
                    wrap(n)
}

Prerequisities for a km project

Similar Messages

Maybe you are looking for