Prerequiste checker for Secondary site 2012 Sp1

Hello All,
We want to install SCCM 2012 SP1 Secondary site from SCCM Primary console.
We found out that we can run PreRequiste checker command from primary site server like below:
◦prereqchk.exe /SEC /Ssbport 4022 /SourceDir <Source Folder Path>
I have 3 questions
1) Can anyone tell what is /SourceDir in this command?<source Folder="" Path=""></source>
2) Also if we have install Secondary from primary console where will the script file be created (configmgrautosave.ini) so that we can automate other secondary sites installation
3) If we install SQL express 2012 CU2 manually on secondary server, can we installed named instance for it?
Appreciate any help in advance!!!

Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • Service Manager 2012R2 - Hotfix for Service Manager 2012 SP1 secondary Management server

    Can the hotfix for the issue described here -
    http://blogs.technet.com/b/servicemanager/archive/2013/04/22/service-manager-2012-sp1-secondary-management-server-cannot-set-availability-on-a-health-service-that-doesn-t-exist.aspx 
    , be applied to a 2012R2 Service Manager environment? 
    My dilemma; In a Service Manager 2012 SP1 environment, I installed a secondary mgmt server, promoted it, then upgraded to R2. This R2 Primary mgmt server has the error described in the TechNet blog. 
    The reason this was done, the original primary mgmt server (2012 SP1) resided on the same server as the Portal. This original primary is still at 2012 SP1 with the System Center services disabled.
    Again, can the hotfix for Service Manager 2012 SP1 secondary mgmt servers be applied to a Primary mgmt server (or environment, however the hotfix is run) server Service Manager 2012 R2? 
    Thank you,
    Brian VanDam
    BVAN in SoCol

    Hi,
    Hmm, you should probably log a case for this, but my first thought here would be to install a new SCSM 2012 R2 server and promote that one to the new Primary server, then remove the old ones.
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Cumulative update 15 for SQL Server 2012 SP1 is released

    Cumulative update 15 for SQL Server 2012 SP1 is released
    http://support.microsoft.com/en-us/kb/3038001
    MDS related fix is:
    FIX: Add three stored procedures to clean up history that is created when you use SQL Server 2012 MDS
    http://support.microsoft.com/en-us/kb/3036601
    After using MDS for a while, the transaction/validation/staging history may grow very large. In this CU we provide 3 store procedure to clean them up manually.
    The fix will be ported over to SQL 2012 SP2 and SQL 2014 CUs in the coming 2 months.
    In next SQL Server release, it will be automated by MDS maintenance job.
    --@ModelID is the model ID that you clean up the log for.
    --@CLeanupOlderThanDate is the date before that the logs or records is deleted.
    DECLARE @CleanupOlderThanDate date = '<Date>', @ModelID INT = <ID>
    --Cleanup Transaction History
    EXEC mdm.udpTransactionsCleanup @ModelID, @CleanupOlderThanDate;
    --Cleanup Validation History
    EXEC mdm.udpValidationsCleanup @ModelID, @CleanupOlderThanDate;
    --Cleanup entity-based staging table
    EXEC mdm.udpEntityStagingBatchTableCleanup @ModelID, @CleanupOlderThanDate;

    Hi SelvaOnline,
    I would recommend to install SP2 and the hotfix that came after it.
    If you don't have a reason to install a CU than don't bother with it.
    SP2:
    http://www.microsoft.com/en-us/download/details.aspx?id=43340
    Hotfix for SP2;
    http://support.microsoft.com/kb/2969896/en-us
    Thanks, 
    Teun

  • Delete Secondary site 2012 R2

    Hi,
    Past week, I deleted a secondary site from our hierachy again and as usual it failed.
    I triggered the uninstallation from the console and selected "uninstall" (no delete). After a few hours, I could see in the logfile on the secondary siteserver that the site got uninstalled successfully. But the console keeps showing "DELETING"
    and the last "show installat status" log entry is "data removed from database.
    I have already run the preinst.exe /DELSITE S04 but then I get an error:
    D:\Program Files\Microsoft Configuration Manager\bin\X64\00000409>preinst.exe /DELSITE S04
      Microsoft System Center 2012 Configuration Manager v5.00 (Build 7958)
      Copyright (C) 2011 Microsoft Corp.
    Cannot find site [S04] in the site control data in the database. Checking in Ser
    verData in the database.
    Failed to execute SQL query
    I've added my account as full administrator into SCCM but still no luck. Primary site server also has been rebooted, no change.
    So 3 questions:
    - How do I get rid of this site? (I can only think of changing the site status in the database to make the delete option available again, but don't like that)
    - Are we doing something wrong deleting a site, because it is never a click on a button... Is there a procedure to follow?
    - Is the command preinst.exe /delsite "SecSiteCode xxx" correct because in 2007 the syntax was preinst.exe /delsite "SecSitecode" "PriSitecode"
    Thanks

    Found a way to uninstall the Secondary Site manually on the Secondary Site itself.
    Run CMD as elevated C:\Program Files\Microsoft Configuration Manager\bin\X64\SETUP /DEINSTALL
    Review the ConfigMgrSetup.log file to check whether uninstallation has been completed successfully or not.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM Console on Secondary Site 2012 R2

    Hi all,
    I just want to ask whether it is supported or not when install SCCM Console on Secondary Site Server in 2012 R2? I've searched over internet but does not find a conclusion about that.
    From technet SCCM Console requirement and interoperability, there is no information that restrict install console from Secondary Site Server, but this link say it is not supported:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/7c31b2d6-130c-46d6-b24d-108110cb0b61/install-sccm-admin-console-on-secondary-site-servers-failed-on-one-of-two-server?forum=configmgradminconsole
    Has anyone try this, because today i installed console from one of my secondary site server and successfully connected with the primary site. Hope that does not break anything because with the ability of RBAC in 2012 R2, i can assign the admin at branch
    site permission he need to manage the clients in this secondary site.
    Thanks,

    I've seen it working with multiple customer. Also, I can imagine that it wouldn't be a supported scenario, purely because it's not tested (both new installations as upgrades).
    As, I'm not working for Microsoft and it's not documented, I can't give you any official statements.  
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How do i view the history to check for indecent sites

    ''dupe of https://support.mozilla.org/en-US/questions/911455''
    i think somebody that used our computer visited porn sites. how do i check for this when it may have been deleted

    If the history has been deleted then you can check the cache on the about:cache page in case the cache wasn't deleted.<br />
    If you have a firewall or router that keeps a log then you can check out that as well.<br />
    Otherwise you are out of luck.

  • No advertisements found on PXE for secondary site

    Hi, our infra consist of 1 CAS, 4 primaries and 2secondaries. Everything works like it sould for OSD except on one of of secondary.Main difference between the 2 secondaries is that the one that doesn't work as Server 2008 R2 with sql 2008 R2 compared to
    server 2012 R2 with sql 2012 R2.
    When I try to pxe an unknown machine, I always get 'smsboot\x64\abortpxe.com' In the smspxe.log, I always get 
    no advertisements found
    right after the machine is recognize as been an unknown computer:
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820357" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
    Has anyone experienced this behavior or help me troubleshoot this weird issue.
    Thks in advance and don't hesitate if you have any questions
    joeblow

    Hi,
    This issue might be related to failed DRS replication.
    1. Please check rcmctrl.log and replmgr.log.
    2. Enable the Verbose logs for the replication:
    HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Components\SMS_REPLICATION_CONFIGURATION_MONITOR\Verbose logging
    Value 2: Verbose (everything)
    3. Run the the Replication Link Analyzer
    4. Verify that:
        That the machine account of the Secondary Server has Local Admin Rights on the Primary machine.
         Check that machine account of the Secondary Server has Local Admin Rights on the SQL DB (Security - Logins).
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

    Hi,
    We try to install sccm 2012 serondary site in server 2012. It always failed.
    I used the rereqchek tools to check system enviroment locally. All passed.
    The primary site installed in server 2012.  Both server had granted the administrator permission.
    Anyone can help to check the below Configmgrprereq.log
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> Commandline :
    "D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    <01-16-2015 08:47:55> Check Type: Secondary site
     Site Server: DPServer.ms.com,
     SQL Server: DPServer.ms.com,
     SQL Named Instance: ,
     Install Folder: d:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: D:\SCCM2012\Source
    <01-16-2015 08:47:55> INFO: Executing prerequisite functions...
    <01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
    <01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
    the SQL Server and management point computers.
    <01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
    <01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
    <01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
    2008 SP2 or later.
    <01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
    <01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
    <01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
    <01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
    <01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
    <01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
    <01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
    <01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
    <01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
    <01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
    server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
    Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
    <01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
    <01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
    <01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
    <01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
    requirement.  Configuration Manager requires at least Windows Installer version 4.5.
    <01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
    <01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
    <01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
    <01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
    <01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
    <01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
    <01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
    or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
    <01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
    <01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
    site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
    <01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    <01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
    <01-16-2015 08:49:55> INFO: SQL Server named instance <>
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
    <01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
    <01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
    <01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
    <01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
    <01-16-2015 08:50:05> INFO: .NET is installed
    <01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    <01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
    <01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
    <01-16-2015 08:50:10> INFO: .NET is installed
    <01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    <01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
    <01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
    <01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
    <01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
    <01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
    recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
    <01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
    <01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
    <01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
    <01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
    <01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
    <01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
    <01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
    <01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
    for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
    permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
    <01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
    <01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
    <01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
    <01-16-2015 08:53:44> INFO: LangID <409>
    <01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
    <01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
    <01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
    <01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
    <01-16-2015 08:53:44> INFO: getaddrinfo returned success.
    <01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
    <01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
    <01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
    Server 2008 SP2 or later.
    <01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
    <01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
    <01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
    requires IIS. Install IIS on the site system to continue setup.
    <01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
    is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
    not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
    <01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    <01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
    <01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
    <01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
    <01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
    client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
    <01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
    <01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
    Windows Server 2003 or later.
    <01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
    Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
    <01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
    <01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
    <01-16-2015 08:56:09> INFO: Setting registry values
    <01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
    on the SQL Server and management point computers.
    Actually the administrative permission had been granted.

  • SCCM 2012 Secondary site Client Communication for SUP

     Hi,
    We have an SCCM 2012 Setup and here is the design CAS-->Primary-->Secondary site servers.
    SUP is configured for Secondary site too. Boundaries are defined with IP Address Range and is proper.
    Some clients are comminicating to Secondary site for updates. Downloading successfully and installing the software.
    But some of the clients are communicating to primary site for updates and retain with the status "Downloading update"
    I have checked the locationservices.log and it is fluctuating between Primary and secondary MP.
    2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
    Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
    1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
    Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
    2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
    I have also checed "DataTransferService.log" and found more errors.
    Error retrieving manifest (0x800704cf).  Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 5576 (0x15C8)
    DTSJob {141CB5AE-8EF2-464D-8D8C-68B868EE7F7B} in state 'DownloadingManifest'. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    Failed to send request to /SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4 at host xxxxxxxx.xxxxxxx.com, error 0x2efe DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    [CCMHTTP] ERROR: URL=https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4, Port=443, Options=192, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:0DA907D5-1709-4B10-B627-61E289FD7149";
     DateTime = "20130405062159.643000+000";
     HostName = "xxxxxxxx.xxxxxxx.com";
     HRESULT = "0x80072efe";
     ProcessID = 4260;
     StatusCode = 600;
     ThreadID = 4200;
     DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    Successfully sent location services HTTPS failure message. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    Error sending DAV request. HTTP code 600, status '' DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    GetDirectoryList_HTTP('https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4') failed with code 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    Error retrieving manifest (0x800704cf).  Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
    my query is how some of the clients are communicating primary site server for updates even though the boundary details are properly configured and Secondary site is configured with sup. Also need to know (as per the log "DataTransferService.log")how
    come the clients are communicating SSL port for updates. Plz help in resolving the issue.

    Hi Kent,
    Thanks for the reply.
    Primary and secondary sites are connected over WAN and we have around 2000 clients which are reporting to Secondary site.
    Considering the WAN bandwidth utiliztaion and number of clients on secondary site we have configured the SUP role.
    Not all the clients are with the above error message around 40%-50% of the clients are with above stated error message.
    Plz let me know what is the error message indicates and do we need to reffer any other logs for indepth analysis.
    Locationservices.log is with fluctuating connectivity
    2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
    Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
    1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
    Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
    2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
    how come the clients are communicating SSL port for updates. Plz help in resolving the issue.

  • Version of SQL Server Express for a Secondary Site in Configuration Manager 2012 R2

    Hi,
    I want to install a secondary site in my Configuration Manager 2012 R2. I want to install the SQL Server Express in a diferente drive. To do so, I want to previous install the SQL Server Express.
    Can I use the SQL Server 2014 Express?
    Thanks in advance...
    Dmsousa

    Sorry, going to be blunt here, but this is why "best practices" are useless. If you don't know the "why" of the best practice and when to apply it, it will cause you to do things that simply aren't necessary (or even harmful) by
    blindly trying to apply them. It is simply is not necessary for secondary sites for perf or any other reason. Also, if this is a VM, then your virtual disks will most likely be on the same physical disks which means you do *not* in any way gain any perf benefits
    anyway (perf benefits come from have additional physical spindles -- logical separation is just that *logical*).
    You have far bigger challenges ahead of you, push the easy button on this one, let ConfigMgr deploy SQL Express for you and move on.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server

    Dear Brother,
    My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
    One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
    1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
    Actions Done: None
    2.[Failed]:The collation of the site database does not match the collation of the parent site's database.  All sites in a hierarchy must use the same database collation.
    3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
    manually verified these permissions. For more information about your options to configure required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
    4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Action Taken:  Domain Account "Microsoft-Domain\BillAdmin" has a
    Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles" 
    5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
    in the root of the primary site server system drive.
    6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
    ConfigMgrPrereq.log-Start
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> Commandline :
    "E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    ?<12-27-2014 23:39:35> Check Type: Secondary site
     Site Server: SecondarySite2.microsoft.com,
     SQL Server: SecondarySite2.microsoft.com,
     SQL Named Instance: MSSQLSERVER,
     Install Folder: E:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: E:\Source\SCCM2012-R2
    ?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
    ?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:43> SecondarySite2.microsoft.com;    Site server computer account administrative rights;    Passed
    ?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:44> SecondarySite2.microsoft.com;    Check Server Service is running;    Passed
    ?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Unsupported site server operating system version for Setup;    Passed
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Domain membership;    Passed
    ?<12-27-2014 23:39:47> INFO: Free disk space on target
    \\SecondarySite2.microsoft.com\E$\. = 83157 MB
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Free disk space on site server;    Passed
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Pending system restart;    Passed
    ?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Read-Only Domain Controller;    Passed
    ?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Site Server FQDN Length;    Passed
    ?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60);    Passed
    ?<12-27-2014 23:39:49> SecondarySite2.microsoft.com;    Microsoft Remote Differential Compression (RDC) library registered;    Passed
    ?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
    ?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    Microsoft Windows Installer;    Passed
    ?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
    ?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    SQL Server Express on Secondary Site;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Existing Configuration Manager server components on site server;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    ?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    SQL Server service running account;    Error;    The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
    name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    ?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    Dedicated SQL Server instance;    Passed
    ?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
    ?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
    ?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;    Parent/child database collation;    Error;    The collation of the site database does not match the collation of the parent site's database.  All
    sites in a hierarchy must use the same database collation.
    ?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
    ?<12-27-2014 23:41:28> INFO: .NET is installed
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    ?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    ?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
    ?<12-27-2014 23:41:29> SecondarySite2.microsoft.com;    Setup Source Version;    Passed
    ?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    Setup Source Folder;    Passed
    ?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
    ?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    SQL Server on the Secondary Site Computer;    Passed
    ?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
    ?<12-27-2014 23:42:15> SecondarySite2.microsoft.com;    Primary FQDN;    Passed
    ?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> SecondarySite2.microsoft.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer
    account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
    required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    ?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Remote Connection to WMI on Secondary Site;    Passed
    ?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
    ?<12-27-2014 23:42:48> INFO: LangID <409>
    ?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Required SQL Server Collation;    Passed
    ?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    SQL Server sysadmin rights;    Error;    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
    on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
    ?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Administrative share (Site system);    Passed
    ?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Site System to SQL Server Communication;    Passed
    ?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:44:35> SecondarySite2.microsoft.com;    Unsupported management point operating system version for Setup;    Passed
    ?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    Windows Failover Cluster;    Passed
    ?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    IIS service running;    Passed
    ?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:45:35> SecondarySite2.microsoft.com;    BITS installed;    Passed
    ?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    BITS enabled;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for management point;    Passed
    ?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Firewall exception for SQL Server for management point;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Administrative rights on management point;    Passed
    ?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:47:45> SecondarySite2.microsoft.com;    Client Version on Management Point Computer;    Passed
    ?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Unsupported distribution point operating system version for Setup;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for distribution point;    Passed
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Administrative rights on distribution point;    Passed
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
    ?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
    ?<12-27-2014 23:47:50> INFO: Setting registry values
    ConfigMgrPrereq.log-End
    Well my question is what would be the best solutions as it bugs me for days now.
    Regards,

    Hello,
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;   
    SQL Server sysadmin rights;    Error;   
    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Did you install SQL server with a local account?
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;   
    Parent/child database collation;    Error;   
    The collation of the site database does not match the collation of the parent site's database. 
    All sites in a hierarchy must use the same database collation.
    Try this blog:
    http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCCM 2012 R2 Secondary Site SQL Express Prerequisites

    Reading Microsoft's 2012 R2 Upgrade checklist (technet.microsoft.com/en-us/library/jj822981.aspx#BKMK_UpgradeR2Checklist ) it says that Secondary Sites now require SQL Server Express 2012 CU2 for new site installs.  Is this also true for Secondary
    sites prior to the upgrade from SP1 to R2?  Does a non R2 SCCM Seconday work with/support SQL Express 2012 CU1?
    Any help would be appreciated.
    Thanks
    Dave

    According to the supported sql version list, a minimum of CU2 is required. See:
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 Secondary Site Migration

    we have to migrate more then 50 Secondary Site to SCCM 2012 Secondary Site. Since we have to low-bandwidth connection for the remote site we prefer to go with SCCM 2012 Secondary site inside of DP.
    I know we can migrate SCCM 2007 Secondary to SCCM 2012 DP and SCCM 2007 DP to SCCM 2012 DP.
    But is there a way i can move the distribution point package from SCCM 2007 Secondary to SCCM 2012 Secondary Site?
    when i try to migrate migrate SCCM 2007 Secondary Site DP to SCCM Secondary Site 2012, it uninstall the 2007 Secondary site and upgrade the DP to SCCM 2012 under the 2012 Secondary site.
    But my requirement is to move the old SCCM 2007 secondary site package to SCCM 2012 Secondary site DP, is there any tool to manage this activity?
    or what is the best practice to do this migration. 

    Hi,
    You could use prestage content in SCCM 2012 to send packages to remote DP.
    Configuration Manager 2012: Content Prestaging and Remote Content Distribution
    http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Upgrading a ConfigMgr 2012 Secondary site

    Hello All,
    Just to get a clarification, Is it possible to upgrade or promote an existing ConfigMgr 2012 Secondary site to a Primary Site. I didn't install any seoarate SQL server for secondary site. Am using the default SQL configuration.
    Please help.
    V I S H N U

     I didn't install any seoarate SQL server for secondary site. Am using the default SQL configuration.
    That is not true. Secondary sites require SQL Server and will automatically install SQL Server Express.
    Can you please elaborate on why you are trying to do this?
    Jason | http://blog.configmgrftw.com

  • SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

    Hi all!
    What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
    Thank you very much for your time and attention!
    Best regards!

    Hi,
    Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
    See: http://jurelab.wordpress.com/ for details.
    Hope it helps
    Jure

Maybe you are looking for