Presario c771us hard drive upgrade

I inherited this laptop from a friend when the harddrive died. It has 1 gig of ram and appears in great condition. I'd like to install a larger-than- original harddrive, then install Win7. I am considering a $76 1TB Western Digital ( "WD10JPVT Scorpio Blue 1TB SATA3 5400rpm 8mb Notebook Bare Drive") for the job.
My questions are : will this drive work in the notebook, and can it be upgraded to Win 7?

Here are the specs for the Compaq Presario C771US Notebook Computer. Here is the HP Software and Driver Downloads page for the C771US computer. Here is HP G7000 Notebook PC and Compaq Presario C700 Notebook PC - Maintenance and Service Guide for the C771US. According to the specs, this model came with 2GB of RAM and a 9.5mm high / 2.5" 5400rpm SATA 160GB hard drive. You may wish to investigate the missing 1GB of RAM.
According to the service guide, the following drive were supported and installed at the factory;
Support for 9.5-mm, 2.5-inch hard drives
Serial ATA
160-GB, 5400-rpm
120-GB, 5400-rpm
80-GB, 5400-rpm
I would consider a smaller hard drive... maybe 500GB or so. There is a better chance of it fitting in the space allotted.
Windows 7 should work without issue, however HP doesn't support this configuration and there hasn't posted drivers for Windows 7 on the support page.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

How can I browse T.M. backups made BEFORE internal hard drive upgrade?

Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
Any help is greatly appreciated!

I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
Choose "Browse other Time Machine Disks" and you should see the old series of backups.
~Lyssa

Hard Drive upgrade

I'm considering a hard drive upgrade but i dont know crap about them. I went over to newegg because i heard it was a good site and found this one......
"Western Digital Scorpio Blue WD5000LPVT 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"
The only problem is, I dont know wheter it is compatible with my Early 2009 13 inch macbook pro..... Should I go with this one or are there better ones out there? I'm not really worried about price. I was aiming to get a 500gb. Thanks.

It is compatilbe if it's a 2.5" notebook SATA II 3.0 Gb/s model. Take Csound1's advice. If you buy a WD drive or any other makers' drives do not purchase any "green" drives as they don't work well in Macs.
If you want better performance get a drive rated for 7200 RPM with as large a cache as possible (typically 16 MBs.) Other makers to consider include Hitachi, Seagate, and SamSung.
If you want faster speed consider the Seagate XT500 hybrid. Or visit OWC and look into their DataDoubler that enables you to replace the optical drive with an SSD (or another HDD.)

Hard Drive Upgrade - Incorrect Capacity Shown In Disk Utility After Installation

I have an older model Macbook Version 2.1 that had an 80GB hard drive installed. I have just installed a Western Digital Scorpio Black 500GB internal hard drive upgrade and successfully cloned my data over using Carbon Copy Cloner. The problem I have encountered is that only 98.1GB of capacity is shown in Disk Utility for the new hard drive. After starting the computer using my bootable copy via an external USB drive, I formatted the newly installed 500GB drive with the appropriate Apple formatting (e.g. GUID and Mac OS Extended Journaled) but it only shows 98.1GB of space available on the new drive. I was able to successfully clone the information from my bootable back-up of the old drive to the new drive but I just don't have the full 500GB capacity available to me.
What should I do? Is this a problem with the new hard drive or is there something I need to change on my Macbook to "see" the whole capacity of my new drive?
Thanks for your advice,
Dave

Hi Andrew,
When I formatted the new drive did it with 1 partition and it displays a TOTAL of 98.1GB free space (both in Disk Utility and About This Drive). As far as I can tell, the Macbook is treating the new WD drive as if it is only a 98.1GB drive rather than the 500GB drive that it is.
Thoughts?
Dave

How do I reinstall my operating system after hard drive upgrade on MacBook pro? I have Snow Leopard install disc

How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!

Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao.

IPod sync problems after hard-drive upgrade/change

Hello all,
Can anyone PLEASE help?
I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date the last time I checked.
Before I go further, my system specs are:
iMac
24-inch, Early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X Mountain Lion 10.8.2 (12C60)
When I connect my iPod Classic, the iPod screen initially shows 'Synchronisation in progress' (or whetver similar wording it actually is)... but this is just very briefly. It then indicates "Connected", and that's the way it stays and doesn't change at all.
It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
Now, it hangs... and hangs... and hangs... and hangs.
During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
Any help would be greatly appreciated.
Best regards
BionicDan

First things first the spinning beach ball is usually an indication that Search is going nuts.
Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
Is your music still in iTunes on your new hard drive or is it only on your ipod?
If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

Time Machine confused after iMac hard drive upgrade

Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

As V.K. says, that procedure may or may not work.
The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

G40 2384-A9U Hard drive upgrade

I updated the bios to 1.21 which seems to be the latest bios 2006. The hard drive upgrade listed for purchase 2004 was an 80G. I was hopeing that I could put a larger dirve in because the newer bios was 2 years past the hard drive upgrade listing. I tried a 250G but it does not seem to be recognized. Does anyone know what the max hard drive size the latest bios supports?
Solved!
Go to Solution.

I first entered CMOS (setup) and under security, and set the desktop to disable. I was able to transfer the data to the 250G from the 40G using Ghost 2003 and selecting the image setting -IB (Image Boot). I was fortunate enough to have a floppy drive on the notebook (G40 2384-A9U). I attached an external USB 40G drive to the notebook, booted with Norton's Ghost 2003 boot disk created with USB support enabled. I went into options and selected Image Boot under the image tab and then copied the existing 40G drive to the external 40G USB drive. I then replaced the 40G drive in the notebook with the 250G drive, booted with the Norton Ghost disk and selected the image boot again and copied the 40G USB drive to the new 250G drive now in the notebook. I went back into the CMOS (setup) and put the security for the desktop back to normal. The only thing different seem to be the utilities are missing if you hit the IBM access button. I notice that when you disable the security for the desktop in CMOS, you will see an unpartitioned space of almost 2Gigs. This appears to be where some of the 4 sectors that lenovo uses to hold the boot information and probably their utility programs. The norton -IB switch does seem to get the boot sector information but not the utility portion of the unused area. The result is the unused space is reduced to only 2 megs on a 40 Gig drive and shows up as 4 megs on the 250 Gig drive.

Spinning beach ball after hard drive upgrade

Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advance

Did you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hard Drive Upgrade in Vista

I have an IBM T60p with original 90 gig HD. I spent a weekend trying to upgrade to a larger capacity drive. Downloaded several commercial programs. None of them worked properly. I finally found a way to use Vista to complete the task. This procedure works, have a new 320 gig WD 7200 RPM drive working correctly in my computer. Hard drive Upgrade in Windows Vista
This procedure was used on an IBM ThinkPad T60p with 90 gig SATA HD.Machine was upgraded with a Western Digital 320 gig BEKT SATA drive (Scorpio Black).
Before you start:You need to change the BIOS setting for Windows to recognize your new drive.
Reboot and enter BIOS
Select “Config” => Serial ATA (SATA) => SATA Controller Mode Option: => COMPATIBILITY
Save and exit
Review Boot priorities to enable the Boot from CD option
Have a copy of Windows Vista on CD; the version does not matter, you will use this only to boot from CD.
See WD product description at following website
http://www.wdc.com/en/products/products.asp?driveid=477
You will need an external USB hard drive to back up your existing hard drive.
It needs to be large enough to back up your existing drive.
Plug in the drive, Windows should recognize it.
Format the external hard drive so it is clean.
Backup Existing Drive
Back up drive C to the external drive using Windows Vista.
Go to Control Panel => Backup and Restore Center
Select the “Back-up files or your entire computer” option
Select “Back up computer
”Windows displays “Where do you want to save the backup”
Select “On a hard disk”
Windows displays hard drives available,
Select the drive you just plugged in
Click “Next”
Review the screen “Confirm your backup settings”
Windows displays “Local Disk (C) (System)” in the bottom window.
Click “Start backup”.
Backup will take 1-2 hours.
When completed, you have a complete image of your drive created by Windows Vista on the external HD
Install new Hard Drive
Shut down the machine.
Install the new hard drive per manufacturer instructions.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62826
Boot the computer using the Vista CD.
Once files are loaded, Vista will open
Click “Next”
Click “Repair Your Computer”
Windows displays a window showing operating systems available, the window will be blank.
Click “Next”
Windows displays “Choose a Recovery Option”
Select “Windows Complete PC Restore”
Windows displays the saved image from your external drive
Click “Next”
Windows displays the restoration information
Click “Finish”
Remove the Windows CD
Restore will take 1-2 hours
Set up the new drive
After restoration, the system will reboot and you should be at the Vista Log In screen.
Log in normally and check to be sure your programs work.
You now need to tell Vista you have a new drive, and resize the partition to the capacity of the new drive.
Tell Windows to recognize the new drive
Start Menu, L click “Computer”
Drive C displays the stored image with the same capacity of the old drive.
R click on drive C => properties
Select the “Hardware” tab
Highlight drive C
Select the “Properties” tab, bottom right
Click on “Change settings”, bottom left
Click on the “Volumes” tab
Click the “Populate” tab
Windows will now populate the table with the settings for the new drive.
Save the settings and Reboot the computer.
Windows will now recognize the new higher capacity drive.
After reboot
Start Menu, R click “Computer”
Select “Manage”
In the L window, select “Storage” => “Disk Management”
Disk “0” is your new drive
Select Drive C
R click Drive C, select “Extend Volume”
The Extend Volume Wizard will open
Click “Next”
Click “Finish”
The new drive capacity is now operational.
You will now have two partitions, one for Windows, one for programs and data.

I'm also interested if anyone knows. I called the Square Group in London (Nex Oxford Street) but they said they'd get back to me ... but they didn't ...

MacBook Pro2012 : How can you get hard drive upgraded in Netherlands without losing warranty?

My MacBook Pro (2012) hard drive is almost full, Apple refuses to provide hard drive upgrade service, how can you get hard drive upgraded in Netherlands without losing warranty?

Dear Ralph, and All
My MBP is indeed non-retina.
I also have Apple care support for 3 years
I was in touch with Apple suport since last week. Response I got on Phone was pretty astounding (waiting email confirmation). They say following
- Apple support does not provide such service of upgrading hard drive
- Doing it yourself means you will lose warranty (due to nature of operation one would need to perform on the computer)
- None of authorised delars will provide such a service
So as such there apparantly is no way to get your hard drive upgraded without losing warranty.
Leaves me a bit perplexed
I do understand MBP retina (or iPAD / iPhones) are manufactured in way that makes it technically impossible to upgrade certain parts. But why non-retina MBP?
What do you all think? is this reasonable? is this what a MBP customer would expect?
Really appreaciate the quick responses i have recieved from you and others on this forum.
Many thanks
Tirath Shah

Need help picking the correct hard drive upgrade for my MBP

I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
Suggestions and recommendations very appreciated.

It will take almost any 2.5 inch sata drive.
Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
I'll start you off..
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

Upgrading Presario f572us hard drive

I want to upgrade the hard drive on my old Presario f572us from the orginial 80gb to a lot more GBs. I researched the Net for compatible drives and found a 320gb at a reasonable price. Imagine my shock when I found out the pins are TOTALLY different! Is there a solution to my problem other than returning the new drive and forgetting about upgrading?

Here are the specs for your Compaq Presario F572US Notebook Computer. According to the specs, this model supports SATA hard drives. Please see page #30 of the Compaq Presario F500 and G6000 Notebook PC - Maintenance and Service Guide for instructions on replacing the hard drive. This will require putting the original hard drive bracket and connector on the new hard drive.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Compaq Presario 2586US laptop - hard drive upgrade

I recently took a chance and bought 2 "parts only" Compaq Presario 2500 series laptops off Ebay and was able to make a single working PC with the motherboard from the 2586US being the motherboard I used. I did not have a hard disk, so I bought a Samsung 160gb ATA drive. Turns out I didn't need the little adapter on the bus end because it just plugged right into the socket on the motherboard. The drive is supposed to be either ATA133 or ATA100 at the top end (I don't remember which). I put the drive in and installed Windows. I noticed that it seemed slow but Windows showed the disk at full size. Then I went to dual-boot with a Linux distribution and encountered errors. Through a lot of searching on the web I found out the BIOS and apparently the IDE interface itself (?) doesn't allow a disk larger than 137gb. I checked the BIOS and indeed it says maximum usable size 137gb. It also shows the transfer rate at DMA2 which, if I understand things correctly means it is only transferring at 33mb instead of 100mb or 133mb. The service manual says ATA100, so it should support a DMA5 transfer rate.
I don't claim to understand all of this at all. So, I'm looking for help.
(1) Is there anyway to go beyond 137gb on a hard drive in this laptop?
(2) If not, is the fact that my drive is actually 160gb when the PC only supports 137gb causing more problems?
(3) What do I have to do to get a transfer rate beyond DMA2? The BIOS setup won't let me tab to that field to change it.
Thank you for any help and explanations that I can understand. Keep in mind I'm just your average Joe and not some sort of expert at all. I found a lot of this on the web but not sure what it all means.
Thanks in advance!
Dave
This question was solved.
View Solution.

It originally had a 256mb and a 512mb SODIMM, but they were unmatched. I just went ahead and bought 2 Samsung 512mb matched SODIMM's, so I have 1 gig of memory.
I installed Windows XP Professional SP2, then the Compaq drivers, then SP3, then all the Windows updates, then I installed ubuntu Linux 10.04 - 1 small partition for swap, 1 larger partition for everything else.
I did re-do my disk: I shrank the Windows partition again, deleted the Linux partitions so I had 1 huge empty space, then created a 30gig partition at the end of the drive, then installed Linux. Windows still seems to work fine, and Linux at least boots now. So I guess the first thing I'm going to do is waste 30gb of space for being dumb when I bought the drive. The DMA2 thing has me bothered - the Service Manual lists the 2500 series as all ATA100. Is it possible that as one web site said, the BIOS is detecting too large of drive and therefore thinks an error and slows the drive down? I would have thought since the Service Manual (page 1-23, Mass Storage ) says it supports ATA100 (ultraDMA5?) that it would either say DMA5 in the transfer field or at least let me change it.
This is getting quite a bit above my knowledge base as far as why it's running the transfer at DMA2. On the Internal Hard Disk BIOS set up page it says "Auto" for the type. When I change that to "User Defined", I can tab to the transfer field, but the selections are all PIO or up to DMA2 - nothing above that. That seems like some kind of BIOS error or else the Service Manual is in error.
Thanks for your help so far! Any help is GREATLY appreciated!
Dave

Any idea's on hard-drive upgrade?

hey guys,
I own a Compaq presario V2042AP notebook( about 6 years old) and i wanted to upgrade the stock 40Gb hard-drive which comes with it. I am "GUESSING" that it is and IDE/PATA drive and so i wasn wondering whether the product seen below would be compatible with it:
http://www.expresspcparts.com.au/Items/hdd-360-alt-hm160hc?&caSKU=hdd-360-alt-hm160hc&caTitle=SAMSUN...
Chees in advance if someone can help me out!
Babaquazi

Yes. Its a PATA/EIDE laptop drive and the Samsung 160 will work fine for you. That is the only model PATA/EIDE laptop drive still sold at Frys. They are getting very hard to find.

Presario c771us hard drive upgrade

Similar Messages

Maybe you are looking for