Presario sr2030nx need drivers after upgrading to windows 7 ultimate 64 bit

presario sr2030nx had xp media center edition, i upgraded to win 7ultimate 64 bit. my dvd player says it has some drivers dissabled
there was a pop up about all drivers need to be signed ,  also a unknown device is missing drivers as well.
please help me find a solution, thank you.
This question was solved.
View Solution.

That particual error comes up because of missing driver generally thought to be "Away Mode Driver"
Here is what I copied from THIS POST
Explanation as I understand it
AMD away mode is a power saving measure implemented to some AMD processors. This is a not very well known measure and for good reason as the PC is slowly put into an off like state a device at a time leaving a running PC that looks like it is switched off. Not a very good idea!!
The drivers were provided by some motherboard manufacturers and they were also built into Vista, but are not provided with Windows 7x64 or as I have previously mentioned Gigabyte.
Not having this driver does not affect performance of the PC
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Lenovo L520 Looping after upgrade of windows 7 ultimate

    I have upgraded my Lenovo L520 to Windows 7 ultimate after I had to change a faulty HDD  all seemed to load ok onto the new seagate HDD from USB device downloaded from www.royaltechsavers.com. 
     However when you turn the laptop on you just get Lenovo page saying press enter to enter bios and this keeps repeating (Looping)
     

    Thanks for your reply. Have resolved the problem. I took the hard drive out and formatted it back to a blank drive and reloaded windows. However have downloaded all the drivers but cant get the internal Wi-Fi working light is showing on the laptop. I have to use an external adapter to receive any signals

  • No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

    After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized.  In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
    I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card.  I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
    I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences.  When I reboot as prompted, I’ve still got the same error.
    I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point.  If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
    I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
    Suggestions?  Thanks!
    This question was solved.
    View Solution.

    Hi,
    "If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
    To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager. 
    Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
    After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
    Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
    The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
    the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need audio drivers for hp media center pc m7780n that works on windows 7 ultimate 64 bit

    need drivers that works on windows 7 ultimate 64 bit.

    Hi:
    You can download the latest audio drivers from the Realtek site below. Accept the agreement. Download and install the first one on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Paul

  • Hi,catalyst control centre has stopped working after upgrading to windows 8 .

    Hi,
    i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number:  [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
    i have tried almost everything i could do but the problem still persists
    on every time restarting pc it displays the above error message.
    regards
    abhishek rao

    Hi,
    Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
    Uninstall the AMD driver and catalyst control center. Install the version  located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Tungsten T3 Hot Sync in Windows 7 Ultimate 64 bit and WIndows XP mode

    I upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not sync.  I downloaded desktop 6.3, 4.1.4, and 4.1.4e. I tried all three in both windows 7 and windows XP mode which I am told is a 32 bit O/S but I'm really not sure.  I have tried hot syncing in bluetooth in windows 7 the T3 and Laptop connect but it keeps telling me the port is in use by another program? Does anyone know what I have to do to get it to sync or am I doomed to throw my trusty T3 out? Any Ideas?
    Post relates to: Tungsten T3
    This question was solved.
    View Solution.

    Stan_R wrote:
    link no longer works
    You are correct, but you have pulled up a post that is over 3 years old!
    If interested in syncing to a 64bit system, please view the sticky thread at the top of this section entitled "64bit Windows USB Drivers for Palm Desktop"...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Drivers issue for Lenovo u400 after upgrading to Windows 8

    I recently upgraded to windows 8 an after that facing driver issue for ATI Radeon graphic card and wifi, and also cypress trackpad  software is not working. All the supported drivers provided by Lenovo for windows 8 are fake and none of them are working. I even tried to search for drivers for graphic card from AMD website but unable to find any suitable drivers.
    And to my surprise when i called lenovo technical support for help, the representative told that no such upgradation is possible for older system, but in Lenovo wesite it is clearly mentioned that upgradion is possible and they are provinding windows 8 drivers for this model which does not works at all :-(
    Kindly some one suggest some workaround for this issue.
    Solved!
    Go to Solution.

    I had the same problems with the Cypress driver after upgrading to Windows. Based on I did I downloaded the Windows 8 driver for the Ideapad U300s and it works GREAT. There were no compatibility issues, shows up in Device Manager etc. It also has and icon on the task bar that responds to the F6 key for disabling. Best yet this driver has a Palm Rejection tab. I set it for heavy and no wild pointer movements so I find I now keep the trackpad enabled. NOTE: the file name of the driver I downloaded and installed is: Ogt102w8. Hope this helps you and can't figure out why Lenovo has a driver listed for the U400 that does not work while this driver works great.

  • Drivers missing for Envy 6 after upgrade to windows 8

    There are a few missing drivers shown on the device manager after Upgrade to windows 8 for model: Envy 6-1006TX.
    The four items are:-
    1. PCI Device
    2. PCI Simple Communications Controller
    3. Unknown device
    4. Unknown device
    I try to find it on the support and download page on the product support but could not find.
    i even go to HP Support Assistant website to try download the support assistant for window 8, but the links is not working.
    Can anyone assist ? Thanks

    Enter the Device Manager in Windows 8 by holding the Windows key and tapping the x key once. In the menu that is invoked, select the Device Manager. Right-click on the unknown device and then select the details tab. See the following image. I arbitrarily selected a device as an example. 
    Post the image by using the snipping tool. The snipping tool can be found by using the Windows key + x and selecting search. Type in "snipping" and the snipping tool link will appear for you to click on it and use as in the following image.
    Post all that is before the &SUBSYS in the top PCI\VEN alphanumeric string and I can use it to see if the manufacturer of the device has  posted a Windows 8 driver. Sometimes the success rate for finding a driver is greater at the manufacturer website.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • After upgrading to windows 8, spectre 14 usb3 slow

    are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

    Hello rumbacha.  I understand you're trying to locate some drivers for your SPECTRE for Windows 8.  
    There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have.  This document can show you where the product number is located.
    Once I have this I will attempt to locate the drivers for you.
    Have an excellent day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • No sound after upgrading to Windows 8 HP G60-553NR Notebook

    I recently upgraded to Windows 8 from Windows 7 64-bit on my HP G60-553NR and went through 3 tiers of tech support with Windows because after upgrading to Windows 8 Pro.... I had no sound coming from my speakers from my notebook nor will sound play when headphones are plugged in. Windows Tech support said that there are no compatable sound drivers to download, which leaves me with no sound completely which is no bueno. So, is there a driver that I can download that will work on my notebook?! If not, how do I downgrade to Windows 7. I'm a DJ and I really need some sound like asap. Thanks in advance for your assistance. Thanks

    Do an HP system recovery to get back.
    If you have discs - put first in and boot.
    If not, you can go into settings from CHarms and advanced to select recover. Here's more: http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03489643
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • No audio device installed after upgrading to windows 7???

    after upgrading to windows 7 audio is not working error audio device not install driver error...

    Hi,
    You will need to identify your CPU and chipset. CPU-z is a free and safe utility that can do that for you.
      If your system has an Intel chipset with disccrete or onboard graphics or an NVIDIA chipset with onboard graphics, then the drivers are here at this Realtek download page.
    If your notebook is an AMD CPU and NVIDIA chipset, with a discrete graphics module installed, then the driver for your Conexant CX20549-12 will be here.
    Post you results here in your thread so others rsearching for the same information can benefit from it. 
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Driver for the ethernet controller on a HP Pavillion P600000 Series desktop after upgrading to Windows 7 Enterprise?

    After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model
    No. p6710f. I located the drivers on HP's website, but Windows 7 Enterprise
    is not listed as compatible. Compatibility list:
    Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
    The original driver (according to HP's site) is a Realtek PCIe Family networking controller, Version:7.26.902.2010 Rev. A.
    I tried contacting HP, but apparently I voided their warranty once I upgraded to Windows 7 Enterprise. I do not have a support plan with Microsoft because the operating system was purchase through TechSoup (nonprofit). I greatly appreciate your help;
    let me know if you need more information.

    On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
    After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
    but Windows 7 Enterprise is not listed as compatible. Compatibility list:
    Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), 
    Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
    Windows 7 Ultimate and Enterprise are essentially the same with regard
    to their software. Only the license is different. So if it's
    compatible with Ultimate, it's also compatible with Enterprise.
    Ken Blake, Microsoft MVP

  • Sound distorted after upgrade to windows 10

    sound playing is generalldistorted after upgrade to windows 10 pro. Individual sound elements in windows sound scheme seem to be OK.

    Yup, you're not the only one with audio problems. I have a HP Split X2 also, my model is the m121-sa. The problem is that the company that makes the audio chips is IDT which has been sold to a new company called Tempo Semi Conductors (This has been done in early 2014). The new company will have to provide new Windows 10 drivers to support our audio chips, whilst they have made Windows 10 drivers for their newer chips; our old ones has no current drivers made officially for Windows 10. Microsoft are aware of this problem and will not be making any drivers - their solution is to use the Microsoft drivers by unistalling the driver through device manager and updating the driver to the Microsoft High Definition ones. The problem with the HP Split is that you loose beats audio and the audio is quiet, but it works on all apps. NEITHER HP OR MICROSOFT WILL PROVIDE A DRIVER That is above the IDT .6499. It is upto Tempo Semi Conductors to do this and they don't provide end user drivers but OEM's like HP. The problem only lies with metro apps, win32 apps such as Chrome has audio working... If you are having problems with the audio being quiet with the HP Windows 8 drivers (IDT), use the following settings. (though, I think my laptop is defective, but my warranty is gone so, I just turn up the treble - even though it sounds high pitched)  On a side note, my other laptop (Toshiba) have been good by providing drivers for all components - Hopefully, Tempo do provide support for IDT as not only HP but other companies also use this chip. By the way, do you problems with start menu being black and blurrly text? For some reason, Windows 8 drivers don't do this but Intel Windows 10 drivers do this. Miracast also only works on the .37 driver and not the newest Windows 10 driver; will need to test this further. Yes there are new TEMPO drivers, but these again  are for the new chips and not our old ones. It didn't work on my HP Split but you can try them below: http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71717.html - notes for new driver 6.10.6504.0 http://ftp.hp.com/pub/softpaq/sp71501.exe - setup 6.10.6504.0 (64 BIT ONLY; WILL NOT WORK ON 32BIT) 32bit driver is 6.10.6503.0 EDIT: HP seems to be deleting my images. Not sure why. 

Maybe you are looking for