Presario v3702TU trying to setup it up with winxp 64 bit, but unable to get audio to work
Hi,
I just installed a old laptop of mine with win xp 64 bit + sp2.
I am able to get most of the drivers for xp 64 bit, but audio is troubling me.
I am unable to get exact driver for the below Device ID
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CD&REV_1000
which should be connexant smart audio 221.
I ahve installed the UAA driver, but not able to get exact dirver for xp 64 bit. All the drivers availble on net seem to be off vista/xp -32 bit.
Please help
It is really hard to find 64bit driver
There is one has similar issue.
http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio-Reply/Vista-to-XP-downgrade-No-Sound/td-p/26...
You can get the driver from the page 2, or get it the skydrive link below:
http://cid-3f10d7c1771f7efe.office.live.com/self.aspx/Public/Conexant%20SmartAudio%5E_221%5E_XP.zip
Please note, MS UAA driver must be installed before audio driver. Try to use the MS UAA driver from the page 1. If has problem then use the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&tmp_geoLoc=true&software...
Sorry, i don't have unit to do the test for you. Please let me know what the resoult is.
Cheers
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
Similar Messages
-
I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?
Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer. -
Trying to setup RAID 1 with new SATA drives on xserve 2009 model
Trying to setup RAID 1 with new SATA drives on xserve 2009 model
I have an Xserve rack mount model Xserve 2.26 Quad Core (EMC# 2279) with an Apple RAID card, 24GB RAM (running 10.9 Server software)
Purchased two Western Digital 1TB SATA III 7200 RPM 64MB Cache Black WD1003FZEX drives
It came with three 160GB SATA drives. I'm leaving one of the original 160GB drives for the OS, but I want to replace the 2 other drives and set it up with RAID 1 (mirrored). I bought 2 brand new Western Digital 1TB SATA drives and formatted them on another Mac through Disk Utility with Mac OS Extended (Journaled) formatting. I then placed the new drives in the Xserve and booted it up. After I login it immediately gives me 2 error windows saying...
"Apple RAID Card
The Apple RAID Card installed in your system requires your attention."
It has two buttons underneath this message allowing me to either select 'Ignore' or 'Open RAID Utility'
I've tried to RAID the drives the Disk Utility and through the RAID Utility with no success.
I have both drives mounted on the desktop, as separate drives, but I really need to set these up as a RAID 1.
I've been reading other forums, where others have been able to get this to work by using a jumper on certain pins (5 & 6)of the drive to back down the transfer rate to 1.5 Gb per second. I tried that and it didn't work for me. Maybe I used the wrong pins -- I just don't know. I'm also wondering if there is some Apple firmware that is required on these drives? I'm asking for help from anyone who has gone through this same issue. Thanks in advance.UPDATE -- I had an issue with the RAID card battery, it was dead and I have since replaced it. But I am still unable to setup the RAID 1 drive configuration. Does anyone know if it has something to do with the faster transfer rates on these new drives. Maybe they need to be clocked down with certain jumper settings on these Western Digital drives? Or am I fighting a losing battle because these drives don't have Apple firmware? Any help would be appreciated. Thanks.
-
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570 -
Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?
Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version
-
I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas
You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan -
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this
First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X -
I'm unable to sync my ical with my ipad. I've tried to set it up through i-tunes but that doesn't seem to work.
You have sync all iCal calendars chosen or selected calendars?
No problems syncing contacts with the Address Book or with anything else included with the iTunes sync process? -
I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?
Backing up and restoring your Profile should have included your bookmarks.
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
As far as working with that file in {like} NotePad goes:
A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
Or try using an online JSON editor like this, to try to display only the "uri" field.
https://www.jsoneditoronline.org/ -
All my contacts, calander, notes etc have been sinchronised with Outloook on my i phone. I am trying to move them to i cloud but unable to get it done
No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.
-
I have been trying to restore my iphone5 with icloud back up. Keep getting an error. Any trouble today with Icloud? what can be happening? (I restored it yesterday to an older back up and it worked perfectly!!)
From your other post on the same subject.
my iphone not restoring to icloud today. I restored it yersterday to an older copy and worked perfectly... Any troubles today with ICloud? what should I do? -
i'm trying to sync my iPad with my new pro and i get message saying 5 computers authorised ?? what to do
1. De-authorize one of your five computers and then authorize your new Pro.
Or, if you don't have five computers and got rid of them before you de-authorized them...
In iTunes, click your iTunes user ID in the upper right corner of the iTunes Store. Select Account and then press the "De-Authorize All" button. All of your computers will be de-authorized. Then it is just a matter of re-authorizing the computers that you want to use with iTunes.
Maybe you are looking for
-
DEar All, I have a requirement actually I have a field shipping codition on the screen for which I have created the custom F4 help now when I select the the value using the F4 help I want another fields shipping type on the scren to be filled atomati
-
How to remove the Google Redirect Virus on my gf's pc? Nothing seems to work!
Hi Guys, So I was trying to save my girlfriend's pc from this Google Redirect Virus (the one where you are redirected to some random commercial site when you click on a link in google), but I am having real trouble. Of course I want to solve this and
-
Stop Hardware checking for OS X Update?
I have a ~2007 Macbook. The ram and HDD have been upgraded to 4gb / 500gb. My mac meets all the physical system requirements for OSX Yosemite, though fails to download / install due to its year of release. Is there a way to change the year of release
-
Issue with Evaluate_Aggr Funtion
Hi All, I am having issue with Evaluate_Aggr function in RPD, i am using OBIEE 10g EVALUATE_AGGR('SUM(COUNT(%1)) OVER ( PARTITION BY (%2) ) ' AS VARCHAR ( 200 ), "BMM"."Table1"."Col1", "BMM"."Table2"."Col2") The wierd thing is the above calculation i
-
1 step workflow hangs following client copy
Hi. We are using SRM 4 with the basic 1 step approval workflow. We just copied our live system to make a new test system and I have run all the BDLS / attribute replace jobs and such like. I have also scheduled the RSWWCOND / RSWWHEX / RSWWERRE jobs.