Presence Call List for 9951

Hello Everyone,
I have an enviroment of UCME running on the top of ISR router we have configured Presence call list but looks like it did work for sccp and not for SIP Phone 9951 (sip9951.9-1-1SR1) I made eveything follow every thread and did all the required configuration I even reloaded the router but look like it do not work for SIP and work fine for sccp.
Sample of configuration:
presence
presence call-list
max-subscription 500
watcher all
allow subscribe
and I configure allow watch command under all DNs.And I doubled checked my configuration this odd I appreciate the Expert guide to address and solve this issue.
thanks and Regards,

Dear Manish,
I already followed cisco guide that you sent and here is my configuration below:
presence
presence call-list
max-subscription 500
watcher all
allow subscribe
sip-ua
mwi-server ipv4:192.168.1.7 expires 3600 port 5060 transport udp unsolicited
registrar ipv4:192.168.1.1 expires 3600
sip-server ipv4:192.168.1.1
host-registrar
presence enable
refer-ood enable
voice register global
mode cme
source-address 192.168.1.1 port 5060
bandwidth video tias-modifier 512000 negotiate end-to-end
timeouts interdigit 3
max-dn 100
max-pool 100
authenticate register
authenticate realm cisco
timezone 29
date-format D/M/Y
voicemail 800
url directory http://192.168.1.1/localdirectory
file text
create profile sync 0003561540386854
camera
video
voice register dn 1
number 222
call-forward b2bua noan 800 timeout 15
allow watch
shared-line max-calls 16
mwi
voice register dn 2
number 333
call-forward b2bua busy 800
call-forward b2bua noan 800 timeout 15
allow watch
mwi
voice register dn 3
number 444
call-forward b2bua busy 800
call-forward b2bua noan 800 timeout 15
allow watch
mwi
voice register dn 4
number 555
call-forward b2bua all 111
call-forward b2bua busy 800
call-forward b2bua noan 800 timeout 15
allow watch
mwi
voice register dn 5
number 666
call-forward b2bua busy 800
call-forward b2bua noan 800 timeout 15
allow watch
mwi
voice register pool 1
id mac xxxx.xxxx.xxxx
type 9951
number 1 dn 1
cor incoming int-CSS default
presence call-list
dtmf-relay rtp-nte sip-notify
voice-class codec 1
no vad
after-hour exempt
username neo password 12345
conference drop-mode creator
conference admin
camera
video
voice register pool 2
id mac xxxx.xxxx.xxxx
type 9951
number 1 dn 2
cor incoming int-CSS default
dtmf-relay rtp-nte sip-notify
voice-class codec 1
username neo password 12345
after-hour exempt
conference drop-mode creator
conference admin
camera
video
voice register pool 3
id mac xxxx.xxxx.xxxx
type 9951
number 1 dn 3
cor incoming int-CSS default
dtmf-relay rtp-nte sip-notify
voice-class codec 1
username neo password 12345
after-hour exempt
voice register pool 4
id mac xxxx.xxxx.xxxx
type 9951
number 1 dn 4
cor incoming int-CSS default
dtmf-relay rtp-nte sip-notify
voice-class codec 1
username neo password 12345
after-hour exempt
voice register pool 5
id mac xxxx.xxxx.xxxx
type 9951
number 1 dn 5
cor incoming int-CSS default
dtmf-relay rtp-nte sip-notify
voice-class codec 1
after-hour exempt
cor incoming int-CSS default
dtmf-relay rtp-nte sip-notify
voice-class codec 1
username neo password 12345
after-hour exempt

Similar Messages

Call List Assignment

Hi CRM Experts
Can anyone please help? I want to segment my call list and assign to different agents. For example, Surnames A-C to call agent 1, Surnames D-H to call agent 2 or alternatively the first 100 records to agent 1, the next 100 to agent 2, etc.
Is this possible and if so how?
Thanks in advance.

Hi,
I would start by looking at the standard program called by transaction CRMD_CALL_LIST. I am not sure that you can segment the call list as you describe but you could just create separate call lists for each agent and then merge them using the CRM_CALL_LIST* function modules.
Regards,
Patrick.

Assign pcal to call list?

Hi,
is it possible to assign planned calls activities to call list?
(scenario: activities planned are made for BPs and later manager has to assign them to call list for agents to execute)
how I can do it?
or maybe do you know if it is possible for an agent to find pcal activity on BP and make a call from this activity?
I couldn't find the same calling functionality in activity as I have in call list workspace.
Regards
Radek

Easiest method to achieve this is as follows.
Create the Campaign.
Select the communication medium as Call.
Select the interactive script which is visible field after you select the comm medium.
Assign the target group in campaign and execute.
It will create the call list with the script.

Call list generation with Target group ( 5 k ) records

Hello Experts,
While generating call list for the target group which consists of 5 k records , system is generating call list for few records and leaving the remaining. Is there set process as this no of records to be in target group while generating call list ?? .
Thanks & Regards
Praneeth Chandra

Hello All,
Issue fixed by running calling list in background rather than foreground.
Thanks
Praneeth Chandra

Get call list.

Hi,
I need all the call lists for given user. I used 'CRM_CLM_CALL_LIST_SEARCH' but it is not giving us all the values.
Is there any other function module I can use to get the call list for given user id?
Please help.
Cheers,
Ashish

This FM is used to read call list for given call list id. But I need the call list for given user id.
Kindly pass the name of function module which takes user id as input parameter and gives output of all the call list assigned to it.
Cheers,
Ashish

How do you determine in the voice listing for the bill if the call is incoming or outgoing

I have selected the "Calls, Messages, Data" tab and clicked on voice, but the detail does not indicate if I made the call or received it. I tried clicking on "View Additional Call Detail" but all it does it make the screen go gray and does nothing.
I get to and from information on messaging but not calls. Am I looking in the wrong place.

Hi rsm711!
You pose a great question, and I'm happy to help. I checked online, and I see that the origination and termination of calls are not listed on vzw.com but if you click on the "View and Save Printable Bill" link, after clicking the "View Current Bill" link from the homepage, you can see whether the calls were incoming or outgoing.
Once the bill pulls up, you will be able to view all of the call details for each line. You can save the bill to your PC from there, as well as print the bill (or a portion of it).
I hope this helps, have a great day!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Reject list for phone calls

I been getting unknown calls, and i wanted to know how do i set a reject list for these calls?

You don't.
You can check with your wireless provider and see if they offer such a service.

Bt phone 2.1 all call lists empty for past 10 days...

I have no record of any calls for past 10 days -all calls etc message says "all call list empty" yet i know people have called.I am told it is a software problem-my current software version is v1935i006f007 Type A.What is going on

I have had this happen twice - the main screen shows missed calls but when you look at calls list it is empty. Same software version as you. The only way I have found to get it back to normal is to reset the phone.
Peter

Calls listing, why repetition of the same contact for each call ?

Calls listing, why repetition of the same contact for each call ?

jasonnPOS,
you seam to have had the exat same problem I am having now. Have you solved it?
The link you send in your post :
http://support.apple.com/kb/TS2326
As I think you already noticed doesn't solve the problem it merly duplicates the numbers in each contact. One with +and country code and one without that...
There has to be another solution...

Views for call list inTelesales Modules

Hi,
There is a work centre link called IC_CALLLIST. This is displaying only three four fields and search funtionality and critera that are present in PCUI are not provided. Kindly let us know if there is any workcentre or link groups that has the call list search functionality.
Thanks in advance.
Regards,
Praveen

Hi,
The number mentioned by you is SAP Notes??
Actaully, i am trying to look for the call list search functionalities in CRM 2007 and trying to compare this with PCUI. When i try to search the functionalites that are available in PCUI with CRM 2007, I am not able to find any functionality.
Thanks,
Praveen

Which BADIs are available for call list maintenance

Hi
I have created a call list after campaign execution. In the call list maintenance I have to set a few parameters. I was wondering if this could be automated by way of a BADI implementation. For example we would like to assign the call list to the appropriate org unit, interaction center and for the call list to be activated automatically rather then having to be done so manually.
Cheers
Declan

There is no BADI exists for this functionality. You have write your own FM and include your custom FM at the beginnin of this BADI: CRM_MKT_MODIFY_ORDER. The main import par is GUID of Campaign
Also check this note: 1064578
Let me know
Hope this helps

CRM Genesys (G+ 7.5) addional fields during synchronization of call list.

Hello.
I have the requirement of sending additional fields to Genesys (G+ 7.5) during synchronization of call list.
Do you know if it is possible? I have searched for any documentation or similar topic and I haven't found any document.
Thank you in advanced.
JM

it can be done with the help of a system code 'sy-xcode'. it is initialised the time list is sorted so just keeping a check point, we can solve this problem.
Vishu Khandelwal

IPhone 5s Recent Call List Limit

What is the Recent Call List Limit for an iPhone 5s?
Can you view the entire Recent Call List Limit from the screen?
Today, as I would delete a call from the list, an older call would appear at the bottom of the list.
Thanks!

The Recent call list will display the last 100 calls.
You can scroll through the list to see from the beginning to end.

I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
Any help would be appreciated.
Thanks

itbitybob, good day!
Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
KevinR_VZW
Please follow us on Twitter @VZWSupport

How can I delete the recent calls list in FaceTime?

How can I delete the recent calls list in FaceTime of my Mac?

Hello muchaim,
After reviewing your post, it sounds like you want to delete the recent call list. I would recommend that you read this article, it may be able to help the issue.
FaceTime for Mac (Yosemite): Make and receive FaceTime calls
FaceTime keeps a list of the most recent calls you made, received, or declined, with the most recent call at the top. To return a call, click the Video button or the Audio button . To remove a call, select it and press Delete.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Presence Call List for 9951

Similar Messages

Maybe you are looking for