Presence status from iMessage not shown in Mail since Mavericks upgrade
I'm re-posting this in the Mail folder, maybe somebody here knows the answer:
https://discussions.apple.com/message/24928633#24928633
Hi,
It seems it is a function that seems to have dropped by the wayside.
There is nothing in the Mail Preferences that seem to enable it.
Nor is there anything in the most likely menus (View, Window)
8:28 pm Saturday; February 22, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Similar Messages
-
Presence status not shown in Mail since Mavericks upgrade
Hi there,
In Messages I have two chat accounts, GTalk and Jabber with many contacts. Presence is shown here, I can chat with them, fine.
Before I upgraded to Mavericks pesence of these contacts was also shown in Mail. Both when reading in incoming e-mail or composing a new one.
Now it's nothing and I don't see a way to repair this, any ideas?
Thanks!Today I had the chance to test this thoroughly.
1st: MacOS 10.8.3 - contact is green in iMessage, mail from contact shows the green presence bubble in mail.app
2nd: MacOS 10.9.1 -contact is green in iMessage, mail from contact shows nothing about presence
It was the same contact, same e-mail, same machine.
Is there anybody from Apple watching this? -
Iphone not pushing/pulling mail since iOS4 upgrade
I have an iphone 3GS and before I upgraded the operating system to iOS4, I had my phone set to automatically pull my mail to my phone. Now, since I upgraded, the phone will not pull my mail. I can click the refresh button, but it will just show connecting and never pull anything. The only way I can make it pull messages is to power the phone down and power back up. Is there anyone who is having this same problem since the upgrade?
I have found a way to fix this problem. All of the email accounts that you had before the upgrade will have to be deleted and re-added to your phone. That the only way I could get it back to normal.
-
Time Machine not making hourly backups since Mavericks upgrade
Recently upgraded to Mavericks from Lion 10.7.5 (took 14 hr.). Since then, when I enter Time Machine (without being connected to my external backup drive) I get a notification "your time machine backup disc can not be found". The only options given are to "set up time machine" (which I have done) or "cancel". My previous backups to my external hard drive are shown in the back ground but can not be opened and there are no hourly or weekly backups shown.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_
Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!
-
IMessage not working after iOS 5.1 upgrade! Feedback pls
iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......
You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes. -
Why won't my iMessage work on my iPad since I upgraded it to iOS 7.1.1?
Why won't my iMessage work on my iPad since I upgraded it to iOS 7.1.1? I spent 2, 1/2 hrs on chat with the service techs and even they couldn't figure out why when I try ti send messages the person's name comes up red and says they are not registered and a big red REMOVE is in the box. Anyone know a "fix" for this??
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Why can't I view pictures imbedded in Yahoo mail since I upgraded to 16.0.2 ?
Why can't I view pictures imbedded in Yahoo mail since I upgraded to 16.0.2
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?
I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?
-
Im having trouble sending messages from my iPhone 4..ever since i upgraded to iOS 5, its giving me this problem. It says your SMS mailbox is full. Delete some messages to recieve new messages.
I've deleted around 10 huge conversations, rebooted it, restored it, done a soft and hard reset too. What should i do?my boyfriend restored his iphone as a brand new phone and still had this problem, he deleted all his text conversations except mine and his best friend's conversations still nothing, i told him to delete OUR conversation since its a 2 year conversation that he has NEVER deleted ..... he said YES!! we tried to delete it and the phone freezes as soon as we click on the CLEAR CONVERSATION button!!!! we tried about 5 times and this happened everytime we tried!!!! ....is like the phone doesnt wanna let go of our conversation!!! every other conversation he deleted the phone was fine except for when we try and delete ours!!
so yesterday he left his phone alone around 4 pm since we have the apple appointment today at 130pm.......around 11 pm last night his phone went NUTS receiving all the text messages i had sent and never received!!!! and now the phone works just fine!!! ...... CONFUSED?????? yeah we are too!!!
but we're still going to the apple store to see what they can tell us!!! -
ipod 4th generation w/software version 4.3.1 not recognized by itunes since we upgraded to snow leopard.
Help, How do we update and keep the apps/songs on the ipod?Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information paragraph since that may be the problem/solution. -
Hi: my mac air safari is not loading all websites since i upgraded my software.. it download only few website and crome in the mac is not responding at all.. what to do please advise ???
Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Try setting up another admin user account to see if the same problem continues. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About -
iTunes will not shut off. Since I upgraded my software, itunes opens no matter what program I am trying to use. If I close it it automatically opens moments later and interferes with what I am working on. This is so annoying
This is probably occuring because your Mac is attempting to wirelessly sync with a device. Try unchecking the checkbox that reads "Open iTunes when device is connected" (this option can be found under the general page of iTunes when you have a device connected).
-
HTML TOP header is not shown in mail
Hi
I've an ALV for sending a list thru mail correctly, but when user open it HTML top header is not shown
FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE'
i_structure_name = 'ZMMALV_01'
it_sort = gt_sortinfo
TABLES
t_outtab = it_data01.
FORM html_top_of_page
text = 'Time : '.
CALL METHOD top->add_text
EXPORTING
text = text
sap_emphasis = 'Strong'.
CALL METHOD top->add_gap
EXPORTING
width = 6.
text = sy-uzeit.
CALL METHOD top->add_text
EXPORTING
text = text
sap_style = 'Key'.
CALL METHOD top->new_line.
Thanks in advance.Hi,
Use the concept of Events.
I am giving you one of my requirement to show date and title on the ALV report.
Here it is:
Add this event in your report.
*--- Add events for the List
wa_event-name = 'TOP_OF_PAGE'.
wa_event-form = 'TOP_OF_PAGE'.
APPEND wa_event TO it_event.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
is_layout = it_layout
it_fieldcat = it_fieldcat
i_default = 'X'
i_save = 'A'
it_events = it_event
tables
t_outtab = it_outtab
exceptions
program_error = 1
others = 2.
After that use the 'TOP_OF_PAGE' event.
But make sure use the name of event as it is, otherwise it will give error to you.
*& Form TOP_OF_PAGE
* Top of page for ALV
FORM top_of_page.
REFRESH it_header.
CLEAR wa_header.
DATA: lfl_date(10) TYPE c,
lfl_title TYPE lvc_title VALUE 'PROJECT STATUS REPORT'.
* Title
wa_header-typ = 'H'.
wa_header-info = lfl_title.
APPEND wa_header TO it_header.
CLEAR wa_header.
*mask date to dd-mm-yy format.
WRITE sy-datum TO lfl_date USING EDIT MASK
CONCATENATE 'RUN DATE :' lfl_date INTO wa_header-info.
wa_header-typ = 'H'.
APPEND wa_header TO it_header.
*FM to display TOP_OF_PAGE
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_header.
CLEAR wa_header.
ENDFORM. "top_of_page
May it helps you.
Regards.
DS.
Maybe you are looking for
-
How to set up time capsule with router
I have a router N 300 and would like to buy time capsule but I did not find any information how to set up bouth devises. Thanks
-
Trouble with color on Presario, No red tones on display. Not a monitor issue.
Am experiencing trouble with color on Presario, model no. CQ5500F. Purchased a couple of years ago, and trouble was present immediately. Am getting no red tones - red items appear black or sometimes blue. Was told by HP that it was a monitor issue, a
-
Single line item for multiple open items in app
we have three open items to vendor x 100001000010000 But we are paying to vendor only 10000100005000 At the time of entry system showing Vendor account 25000 To Bank account 20000 To Bank account 5000(
-
Acrobat 9pro won't print to PDF
I am using Acrobat 9pro on my Windows XP x64 computer. When I use Acrobat and try to print to PDF I get the error messages "The document could not be printed." and "There were no pages selected to print." I can, however, print to PDF from other app
-
Hi, I have created a ALV grid in ABAP OOP. Want to give F4 help fo rthe material which is key coulmn in the grid. What all the values i need to set in the fieldcatalog for this. F4AVAILABL = X checktable = "MARA'. ref_table = 'MARA'. ref_field = 'MAT