Present final report at the end of the form.
We are working on a performance evaluation form.
There´s a part of it where we specify performance factors, the qualification is from 1 to 5. If the qualification is between 1 & 2.9, it needs a developement plan.
I would need two things, first if the value entered is between 1 % 2.9, the background color to turn red. But at the end of the form get "a report" with all the performance factors that are between that qualification rate, so the evaluator makes a plan for it.
I´m using LiveCycle Designer ES 8.2
Hope to explain enough,
Thanks in advance!
Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason
Similar Messages
-
How to add a sub report at the end of the main report whilst grouped
Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
VikVik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason -
Sequence header at the end of the sequence in the report
Good afternoon everyone,
I have a strange issue with my TestStand Report (any kind of report type) : some time ago the headers (with the name, the parameter's values, the module time, the status) of the sequence and sub-sequence were at the begining. Now they are a the end of the sequence, which means instead of having the status of the sequence first, I have the status of all the steps contained in the sequence BEFORE having the status of the sequence.
I have checked and double checked the Report options : nothing tells that the headers must be at the end.
I have 2 bench on which my sequences are running and one of them has the sequence headers upside down in the report and the other has the headers in the proper order. Their report options are exactly the same and I can't find where the configuration is different !
Does anyone have some idea ? Please ?
TestStand revision : 2010To Norbert :
The steps in the body are ok, in the correct order yes.
I've attached two extract of report (check the Report Correct first), change the extention from ".txt" to ".html", the html one wasn't authorized by the forum.
To jiggawax
I'm not using XML format, only text or html. Where is located the ReportOptions.ini file ? I cannot find it with a basic search, could it be hidden ? As I am not managing this file in the configuration of the benches, it might be the origin of the problem !
Both benches are running the same client sequence indeed : the client sequence are located on a network reachable by the benches.
I doubt that one the client sequence can override a report callback but afterall I should make sure of this possibility.
Thanks for your help !
Attachments:
Report Correct.txt 12 KB
Report Upside down.txt 15 KB -
Urgent: loading a pdf file to presentation server at the end of the day
hi
I got a requirement like smartform will be converted into pdf file and it will loaded into application server, at the End of the day all the pdf files which are generated on that day will be loaded to in file at presentation server ,
so please help me out regarding
Thanks in advance
regards
krishnaHi Chris,
this problems are in fact new to me, but I'm just starting on a new workplace where they have these issues since forever.
I'm hoping that new point of view may find a solution to it ;-)
I'll try to watch the traffic - it could be related to the particular network we have. Will ask and post some more info tomorrow.
Thank you!
/best
/j -
i clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup disc is full (activity monitor shows 3.99 of 4 GB used) and then another stating the download had not occurred due to the disc being full. most of the tunes still appear to be in the cloud but the disc is said to be full, spent a good period of time trying to investigate what has happened but failed...I'm not well up on all of this as an old chap so any help would be wonderful.....
unclefossil wrote:
Thanks Michael, what is the best way of backing up, should buy a cheap standalone external hard drive rather than relying on the Time Capsule which is quite sensitive...
If you read the link I provided you'll get an idea of one way to maintain a backup of your music files, use Time Machine, and not take up as much room on the internal HDD/SSD.
unclefossil wrote:
i live in the Scottish Highlands where Broadband is frequently intermittent disrupting backups.
Your internet connection speed has no effect on Time Machine/Time Capsule backups. Since that is all done locally, over your wireless network you actually do not need an internet connection at all.
unclefossil wrote:
Also I wondered if I could increase the memory on the setup disk by replacing the 4GB card already in the MBP with 16GB cards, if I upgraded would that affect anything I have stored already like my iTunes?
You're asking about the computer's RAM. Increasing that will not increase the size of the internal storage available to the computer. You'd need to replace the HDD/SSD of the Mac, which, depending on what model you have may or may not be possible (with new models of Macs). -
How to display the total at the end of the column in the report.
Hi all,
Could any one please intimate, how to display the total at the end of the column. For example, i have a column, "sales" as the Key figure, and it has the data for all the transactions. Now, i would like to display the total at the end of the report, below the same column.
Similarly, for all the other columns in the report, i need to display the total for all the columns in the report.
Thanks & Regards,
A.V.N.RaoHi All,
Thanks for many suggestions. I tried by providing the "Total" under "Calculate Results as" and also "Counter for all detailed values" under "Calcuate Single Values as", in the "Calculations" tab of the key figure, but i am unable to get the information. Again, i am providing the requirement below:
CHAR - A CHAR - B TIME CH. - 1 KF -1 KF- 2 KF - 3
1 RAM 2012 1 50 50
2 SAM 2012 2 100 200
Result 3 150 250
Assume KF -1 as "Qty." KF-2 as "Price" KF-3 as "Sales".
Please intimate the solution.
Thanks & Regards,
A.V.N.Rao. -
At the end of some of my projects the cursor runs over the end of the project for app. 3 seconds. When rendering the project Final Cut Pro X adds app. 3 seconds of black to the video. There is no effect or gap or something else at the end of the project.
OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help. -
Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?
OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help. -
Blank pages at the end of the report
Post Author: gayatrys
CA Forum: General
Hi
In a report we are having nealy 45 sections consisting of group headers and its sections like group header a,b etc. the issue is we have suppressed the section, by using formula in "suppress(no Drill Down)" but at the end of the report, a page header and footer is displayed for the suppressed detail and group footer sections.Post Author: sharonmtowler
CA Forum: General
in the section expert select supress blank section on all sections
try to minimize the size of the section, the blank page is because it is extending beyond standard page size. -
How to retain the master slide background at the end of the quiz reporting page of a project
I have noticed that the content of the master slide is not retained till the end in the quiz results page of the project. What should I do to retain the contents till the end of the project?
Hi,
Thanks for your time. I have checked the transitions. i didnt give any transition to the slides in the project and i also check the preferences too, i had disable the options that is to fade in and fade out. My problem is "I have 12 slides in this with an intro slide and 10 question slides and then the quiz results page. In that result page, it is showing the result at the end of the result slide the pause button in the skin turned to play button. While clicking that play button it shows only the results, review quiz button and retake quiz button only. It doesn't display the images, widgets, text and some other options which is used in master slide or in the slide itself " Why those things have disappeared? Can you guide me how to overcome this issue.
The solution for the playbar is quiet good. One more doubt in that, The play bar should be displayed in that page but it should be disabled, Is there any solution for this? If yes, kindly share with me -
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Want to buy a home by the end of the year - do I have a chance?
Hi everyone, I'm new to the forums, and only a "lurker" for about a week or so. There are too many factors involved to explain why, but my wife and I want to buy a house by the end of the year; so we're calling December 15 our deadline. As you read through our situation below, please keep the following questions in mind. I have the opportunity to use about $3000 to pay down some debt; what do I pay down, and what do I leave with a balance (and use for purchases)?Should I open a personal loan to pay off some cards and have a "new" type of loan on my credit report? Or will the added inquiry hurt more than the new line will help? I get constant offers from crap places like Prosper, but maybe with a better company...Should I refinance my NJ Class loans at a lower interest rate?Should I refinance my car loan at a lower interest rate or longer term?Should I go into repayment on the Federal student loan now so I can choose the repayment plan with the lowest monthly payment (30-year "extended" or "graduated extended") and have it show up on my credit report with a low monthly payment? Or will it not come up on my credit report as such (will it still show a high payment)? Or will the payment amount be ignored by the mortgage company (I've heard some use something like 1% of the loan amount per month)?Since my wife's employment situation is not ideal, can I get approved with only my credit and income and whatnot (making me the only one legally responsible for payment), but still have "joint ownership" of the property?It looks like a downpayment of 5% on $240k ($12k) turns into about $20k of up-front expenses when you count closing costs and escrow-tax-insurance-somethingorother (technical term, right?). What are the chances that after settling on a price with the seller, they'd accept bumping up the price by the amount of my closing costs, and then paying my closing costs for me? So basically, I'd be financing the closing costs. I've seen it mentioned in another form ("I offered $###k with seller-paid closing costs"). If the chances are low, how else can I reduce those closing costs? I've seen negative points, personal loans and cash advances (not sure if legal to use borrowed funds?), and downpayment-assistance programs (reduce downpayment = more cash available for closing costs, but I haven't seen this offered in NJ outside of taking a second mortgage for the downpayment in certain cases only) mentioned, but does anyone have a definitive list of how to lower the financial burden of closing costs?Based on my income, debts, interest rates, monthly amount I can put into savings, and general "homebuying timeline," when should I get pre-qualified? Please do not limit your advice to that related to the questions above... I hope to learn as much as I can, as quickly as I can 1. Mortgage Credit Scores:
What are your fico MORTGAGE credit scores for each mortgage applicant?I don't really want to pay to get mortgage scores now because I'm not ready to get prequalified... still paying down credit cards, so to me it's useless to get the score until my credit situation is stable. Here are free scores from credit cards and whatnot:
Myself:Discover 6/21: 773Citi 5/26: 744Capital One 6/18: 746Mint.com 4/7: 686 (score to be updated July 7th) My Wife:Discover 6/14: 749 Based on these, and the general deviation between them and mortgage scores (<50 points?) I think I would be able to qualify for a conventional loan, skipping FHA (ugh... mortgage insurance for life?). Some low-downpayment loan programs like Fannie Mae's MyCommunityMortgage (MCM) require higher scores (especially for DU), and I do think I would have the required 680-or-so, but as I mention elsewhere in this post, I haven't found an NJ MCM lender (other than brokers). But ideally, a 3% downpayment (like MCM) and reduced (compared to FHA and conventional) MI (again, like MCM) would be ideal... Obviously, there's no guarantee that these are anywhere close to the mortgage scores, so once I feel like I've paid down my cards as far as I need to (i.e. I feel I'm ready to get pre-qualified), I'll make sure to buy the mortgage scores. I'm thinking that point will be in about a month, but that depends on your answer(s) to question 8 :\ 2. Credit Negatives: None except for a late payment more than 24 months ago on a student loan that was in "interest-only deferment." I believe that's on TransUnion, which is what Capital One pulls. 3. Gross Income./4. Source of income. Myself: $65,000 (+ bonus that some years is as low as $500, so won't include it)My wife: $13,000 (±$2,000) All income is from employment (hers is part-time, and with two retail jobs, very likely to vary; mine is a salaried position). I may get an added part-time just to boost my savings, but it wouldn't be reported to them (I'm thinking a 3-6 month deal). 5. Monthly debt payments. Here are all my cards and loans, including month opened, APR, balance, limit, and payment. All balances as of today: Currently in my name w/wife as authorized user:Elan Financial CC, opened 6/2013, 20% APR:$-10 ($10,600 CL); payment $0Discover It CC, opened 5/2013, 15% APR:$2,900 ($5,000 CL); payment $59 **current APR 0% since entire balance was transferred from Elan at one point with a 0% offer that expires in AugustCapital One Quicksilver CC, opened 2008, 16% APR:$678 ($4,000 CL); payment $25Citi ThankYou Preferred CC, opened 8/2013, 14% APR:$700 ($2,600 CL); payment $25BankAmericard Cash Rewards CC, opened 8/2013, 15% APR:$616 ($2,000 CL); payment $25 My credit limits all went up within the last 6 months. Before then, they were $6,600 for Elan, $4,000 for Discover, $1,000 for Capital, $2,000 for Citi, and $800 for Bank of America. BofA was the only one that didn't automatically raise my limit or tell me I should request an increase, and when I requested it, they were the only ones that hit me with a HP. The Kay card below has also had a constantly-rising credit limit, from an original of $500, to $2500 a year ago, to the current $4000. Just in my name:Kay Jewelers CC, opened 4/2012, ridiculous (25%?) APR:$0 ($4,000 CL) - payment $0Macy's CC, opened 5/2014, 25% APR:$0 ($600 CL as of March) - payment $0M&T Auto Loan, since 9/2013, 5.3% APR:$10,310 ($14,218 original) - payment $231 (72 months total)HESAA/NJ Class, in repayment since 6/2015, 7.5% (approx. avg.) APR:$13,014 (originally less, but interest has accrued while in school) - payment $131FedLoans Direct Loans, in grace until 11/2015, 5% (avg.) APR:$56,237 (originally $52,000, but interest has accrued while in school) - payment $403 under standard repayment, <$250 under extended repayment ("Mortgage Letter" shows $403 unfortunately, since I can't pick a repayment plan now unless I forfeit the rest of the grace period) Wife's name w/me as authorized user:Discover CC, opened 5/2015, ridiculous (>20%) APR:$1,304 ($1,500 CL) - payment $35 So basically, I have a crapload of debt and quite a few recent inquiries. However, my credit score shot up when:The 5/2013 accounts aged to 2 years (and thus the inquiries were removed);I paid down cards and increased limits; usage went from ~$13k of ~$19k revolving limit used to about ~$6.5k (at one point) of about ~$25k (at one point) revolving limit used; now it's at about $5k used of $29k;I was added as an authorized user on my wife's card (at card opening).I think those point to a nice boost to the credit score when (1) I pay down the cards even more [to end of July], and (2) the three inquiries from BofA, Citi, and M&T disappear [2 in Aug, 1 in Sep]. Sounds like my pre-approval should be early October, making my intended closing date near-impossible . Maybe I can still qualify with a good rate despite the inquiries?
6. Employment (for those who are employed). Myself:Went from $16k/year to $26k/year part-time while in school, now $65k/year (as of last month) and salaried, all at the same company for 4 years now, and the boost was due to graduating; surely they can throw out the 2-year requirement? I plan on staying here for many years, and am about 99.9% certain there will be no reason for that income to drop in the forseeable future. Wife:Nothing's sure, and it's very low pay. As noted above, $13k/year at the moment, but she's unhappy with both (retail... ugh) jobs, so that's not guaranteed. She's looking for a break and a decent office job, but even if she gets it, I'm pretty sure the short length of time that she'd have it before getting a loan would make the difference in income useless. I'll add here our budget: In our current situation, with about $5000/month net income ($1k from her, $4k from me), we can comfortably save $2000/month. July and October are 5-week months, so that goes up to $3000 those months. However, I'm using the $3000 surplus from this month to pay down cards. So that's $7k added to savings thru October or $9k thru November. Hypothetically, I could "skip" paying off cards (or pay down all but Discover) in order to boost up savings.
7. Assets/Reserves. This is to determine how much you could potentially have as a down payment and also as reserves to help qualify (for example if your debt to income ratio is high this could help qualify you anyway). Savings: $5000Checking: Everything that goes in, goes to paying credit cards or into savings. I haven't made a purchase transaction with a debit card in over a year because I get points on all my cards. So call it $0 available for moving to savings.
8. Location: This is to determine govt guaranteed loan limits, what special programs might be available for you, how much property taxes & homeowners insurance will likely be, amongst other items. Central New Jersey (Somerset, Middlesex, possibly Hunterdon counties). I don't know where I can find a "conforming" 3-3.5% down loan here that's not FHA, since no local banks seem to advertise something like it. I've been looking at MyCommunityMortgage and they seem awesome - 3-5% down with mortgage insurance that is typical for 10-15%-down conventional loans - but when I do search for "Fannie Mae + your home state" as recommended, all I get is HomeFirst and general info on MyCommunityMortgage (since the income/value limits are higher for NJ, that info gets included in all their documentation on the program).
9. Property Description: Single-family, "single home" (no townhouse/condo). No foreclosures, short sales, or other "as-is" situations.
10. Property Value. $200,000-$250,000
11. Occupancy. Currently? Rent $550/mo. As far as every credit application I've filled out is concerned, it's my responsibility. However, since the contract IS in both our names, I could hypothetically call it $275/mo (even split) or $440/mo (split based on relative income). Not sure what that would help/hurt with; I've heard of sticker shock being a concern for some, but if all goes according to plan ($2000/mo into savings, basically the amount the mortgage+tax+insurance would be), I don't see that being an issue. 12. Transaction Type. Purchase - primary residence. ----------------------------------------- Sorry for the extremely long post... and thank you all in advanceGeorgie_Boy wrote:
Hi everyone, I'm new to the forums, and only a "lurker" for about a week or so. There are too many factors involved to explain why, but my wife and I want to buy a house by the end of the year; so we're calling December 15 our deadline. As you read through our situation below, please keep the following questions in mind. I have the opportunity to use about $3000 to pay down some debt; what do I pay down, and what do I leave with a balance (and use for purchases)? You want to get as many of your ccs to zero as you can ...optimum scoring is one account carrying a balance of 3-9% of your CL, all others at zero ...the mortgage lenders will count each account with a balance as a monthly debt due equal to your minimum payment when calculating your dtirs ...those minimum payments quickly add up and can seriously impact how much you can get approved for.Should I open a personal loan to pay off some cards and have a "new" type of loan on my credit report? Or will the added inquiry hurt more than the new line will help? I get constant offers from crap places like Prosper, but maybe with a better company...Ignore the personal loan offers. You have a decent credit mix now between your ccs and auto installment loan. A personal loan would only hurt your scores at this point.Should I refinance my NJ Class loans at a lower interest rate? Not personally familiar with these but it looks like a SL from the other info you've provided. Generically you should refinance when the total cost of doing so is beneficial to you. That said, a mortgage lender is going to look at total student debt, and use the greater of your current payment or 1% of the total ...thus refinancing for mortgage purposes may not result in any dtir benefit to you. Should I refinance my car loan at a lower interest rate or longer term? If this is a new car loan, yes ...if its a used car loan, it depends on age and value because your current rate isn't outrageous for an older car loan ...generically, if you can refinance to a lower monthly payment at a reasonable cost, you should do so in order to lower your dtir ...but its a trade-off because the HP will probably cost you a few points on your scores.Should I go into repayment on the Federal student loan now so I can choose the repayment plan with the lowest monthly payment (30-year "extended" or "graduated extended") and have it show up on my credit report with a low monthly payment? Or will it not come up on my credit report as such (will it still show a high payment)? Or will the payment amount be ignored by the mortgage company (I've heard some use something like 1% of the loan amount per month)? All of the govt guaranteed loan programs have recently moved to using the higher of your current payment or 1% of the total in your dtir calculations ...do the math and act accordingly. Be wary of any lender that is not using the higher figure when giving you preapproval numbers, uw will inevitably catch it and it could torpedo your loan after you've signed a contract and spent on prepaids and fees.Since my wife's employment situation is not ideal, can I get approved with only my credit and income and whatnot (making me the only one legally responsible for payment), but still have "joint ownership" of the property? She is either on the loan or not ...you can't have it both ways. At the time you apply, your LO will look at both of your incomes and tell you what will work best in your situation. As long as her income can be documented via tax returns, it should be "useable"It looks like a downpayment of 5% on $240k ($12k) turns into about $20k of up-front expenses when you count closing costs and escrow-tax-insurance-somethingorother (technical term, right?). What are the chances that after settling on a price with the seller, they'd accept bumping up the price by the amount of my closing costs, and then paying my closing costs for me? So basically, I'd be financing the closing costs. I've seen it mentioned in another form ("I offered $###k with seller-paid closing costs"). If the chances are low, how else can I reduce those closing costs? I've seen negative points, personal loans and cash advances (not sure if legal to use borrowed funds?), and downpayment-assistance programs (reduce downpayment = more cash available for closing costs, but I haven't seen this offered in NJ outside of taking a second mortgage for the downpayment in certain cases only) mentioned, but does anyone have a definitive list of how to lower the financial burden of closing costs? This is very specific to the loan program ...conventional with 5% dp limits seller concessions to 3%, FHA is 6% regardless, USDA is technically unlimited ...be aware that every lender will have their own overlays which may affect those numbers. It is also affected greatly by your market conditions which at the moment vary greatly by your locale ...in a buyers market, you can expect seller concessions ...in a sellers market, probably not. USDA offers the best govt guarantee program for closing costs since they will allow you to include closing costs in the loan up to the appraised value. New Jersey's web site is screwed up (at least for me) and I can't nail down exactly what dp/closing cost assistance programs are available to you but it looks very dependent on the specific location you are buying in.Based on my income, debts, interest rates, monthly amount I can put into savings, and general "homebuying timeline," when should I get pre-qualified? DO NOT get "pre-qualified" ...get "pre-approved" ...a pre-qual is virtually meaningless ...a pre-approval means they've actually looked at your documentation and, short of verification, are reasonably sure they can get you to closing ...its a huge difference ...as far as when? ...yesterday would have been great ...rates are rising ...its almost certainly going to get worse ...so bite the bullet ...find a decent realtor in your target area, ask them to recommend lenders they have worked with that can actually close their loans ...talk to those lenders ...get a pre-app ...go shopping ...if your credit scores/dtir improve significantly because of cc paydowns, ask your lender to rescore you ...mortgage pulls within 30-60 days all count as one HP. Please do not limit your advice to that related to the questions above... I hope to learn as much as I can, as quickly as I can 1. Mortgage Credit Scores: Its essential to your question of "when" that you know your actual mortgage scores ...the Discover scores are actual Fico cc scores, the others are FAKOs afaik ...but the Fico cc and mortgage scoring models differ in several important ways and vary easily by +/- 50 points depending on what is in your CRA files ...mine actually track fairly closely but others have seen very negative differences ...its worth the $40 imnsho to know where you actually stand ...anything you do to improve them in the next month will only help but is not sufficient reason to delay ...again imnsho. 2. Credit Negatives: Have you tried to have the late removed from the CR? Depending on the SL source, some programs have been very responsive to GW requests after a good payment record has been reestablished ...ymmv but you lose nothing by trying. 5. Monthly debt payments. Get the Discover to under $500 if possible ...and ask for a CLI asap ...Discover has been handing them out like candy lately ...keep a balance open 3-9% if possible but if not, as low as you can ...its more important to zero the other ccs first.Capital One Quicksilver CC, opened 2008, 16% APR:$678 ($4,000 CL); payment $25 ...pay it to zeroCiti ThankYou Preferred CC, opened 8/2013, 14% APR:$700 ($2,600 CL); payment $25 ...pay it to zeroBankAmericard Cash Rewards CC, opened 8/2013, 15% APR:$616 ($2,000 CL); payment $25 ...pay it to zero HESAA/NJ Class, in repayment since 6/2015, 7.5% (approx. avg.) APR:$13,014 (originally less, but interest has accrued while in school) - payment $131FedLoans Direct Loans, in grace until 11/2015, 5% (avg.) APR:$56,237 (originally $52,000, but interest has accrued while in school) - payment $403 under standard repayment, <$250 under extended repayment ("Mortgage Letter" shows $403 unfortunately, since I can't pick a repayment plan now unless I forfeit the rest of the grace period)Its almost certain that the last two will be seen as a combined 69k SL with $690 used in your dtir calculation Wife's name w/me as authorized user:Discover CC, opened 5/2015, ridiculous (>20%) APR:$1,304 ($1,500 CL) - payment $35 ...pay this to zero Credit score almost certainly isn't your major problem ...debt-to-income is Total income = 78k =6500 moTotal mo debt = 134cc/231auto/690SL= 1055 + ~1600 mo PITI+MI (220k@5%/5%dp) NJ taxes are higher than national avgs = 2655 total monthly paymentsThats a be ratio of 41% ...ideal is <36% but many programs will go higher
6. Employment (for those who are employed). Do not count on reason and logic being used in the mortgage process ...this will come down to finding a lender who will work with you ...if the 4 yrs is same company and the line of work matches your degree, it may not be a problem ...but its one reason you want to get the pre-approval process going now ...to find a lender who knows your exact situation, has reviewed the documentation, and given you a pre-approval knowing all the facts ...av pre-qual will look at your score, ask you for your current income, and promise you pie-in-the-sky until the rubber meets the road and his uw upchucks over your employment history ...goodbye loan and all the money you paid ...get a real pre-approval 8. Location: Hunterdon county has a lot of areas eligible for the USDA program and your income is well within the limits ...if the commute is acceptable, its a good program. Somerset/Middlesex are mostly ineligible. The NJ website for dp assistance programs isn't working for me but take the effort to ask your prospective lenders about these programs and their experience with them. Any that pooh pooh them should be scratched off your list. 11. Occupancy. Sticker shock WILL be an UW issue but you appear to have it addressed. Current rent will not factor in to dtir for your mortgage. ----------------------------------------- Sorry for the extremely long post... and thank you all in advance ...I could only wish that everyone would supply as much info as you have ...please feel free to ask if you dont understand ofr if I misunderstood something ...hth -
THE END OF THE RECORD IS NOT TRIGGERING(urgent)
HI ALL I HAVE WRITTEN A REPORT AND I AM DISPLAYING THE OUTPUT OF EACH DISTRICT..
NOW THE REPORT IS SHOWING RIGHT WHEN IT IS CHANGING THE DISTRICT BUT IT IS NOT TRIGGERING AT THE END OF THE REPORT AS AFTER THAT THE DISTRICT IS NOT CHANGING..
I TRIED WITH AT END OF BUT IT IS SOME HOW SHOWING PROBLEM SO I USED A VARIBLE CONCEPT TO GET THE REPORT....
HERE IS THE REPORT can anyone please look at this and let me know how can i do that..
is there any method where i can used in the IF condition to get the last record...
==========================================================
*& Report ZDISTRICT_CUST_AUCSALES
&--THE PROGRAM USED TO DISPLAY THE TOTAL NUMBER OF CONSUMER IN A D.C.-
&----PROCESSED ON A PERTICULAR MONTH AND YEAR..--
REPORT ZDISTRICT_CUST_AUCSALES .
*TABLE DECLARATION*****************************************************
TABLES: /BIC/AUCSALES00,
/BIC/TCOKEY.
*DATA DECLARATION*****************************************************
DATA: BEGIN OF ITAB OCCURS 0,
/BIC/COKEY LIKE /BIC/TCOKEY-/BIC/COKEY,
TXTSH LIKE /BIC/TCOKEY-TXTSH,
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
BILL_DATE LIKE /BIC/AUCSALES00-BILL_DATE,
/BIC/COKEY LIKE /BIC/AUCSALES00-/BIC/COKEY,
BPARTNER LIKE /BIC/AUCSALES00-BPARTNER,
END OF ITAB2.
DATA: COUNT TYPE I,
COKEY TYPE I,
COKEYNO(2) TYPE C,
COKEYCH(2),
BILDT TYPE I,
PROCOKEY TYPE I,
NOTPROCOKEY TYPE I,
TOTCOKEYDIV TYPE I,
TOTCOKEYDIV1 TYPE I,
TOTCOKEYDIV2 TYPE I,
TOTAL TYPE I.
DATA: C TYPE I VALUE 4.
SELECT OPTION FOR DATE SELECTION IN THE SELECTION SCREEN.************
SELECTION-SCREEN BEGIN OF BLOCK DATE WITH FRAME TITLE TEXT-001.
PARAMETERS: S_BILDT LIKE /BIC/AUCSALES00-BILL_DATE OBLIGATORY .
SELECTION-SCREEN END OF BLOCK DATE.
*INITIALIZATION******************************************************
FORMAT INTENSIFIED ON COLOR = C.
write:/ 'PROCESSING DATE:', 20 S_BILDT,
128 'TIME:', 135 SY-UZEIT.
WRITE:/ 'USER NAME :', 20 SY-UNAME,
142 ' '.
WRITE SY-ULINE.
WRITE: / 'D.C' , 12 SY-VLINE,
'NAME OF D.C' , 39 SY-VLINE,
'NUMBER OF CONSUMER' , 60 SY-VLINE,
'REMARKS' , 105 SY-VLINE.
WRITE:/ SY-ULINE.
FORMAT INTENSIFIED OFF.
*AT SELECTION-SCREEN**************************************************
SELECT BILL_DATE
UP TO 1 ROWS
INTO (/BIC/AUCSALES00-BILL_DATE)
FROM /BIC/AUCSALES00
WHERE BILL_DATE = S_BILDT.
ENDSELECT.
IF SY-SUBRC <> 0.
WRITE:/ ' NO DATA FOUND ON THIS DATE'.
EXIT.
ENDIF.
START OF SELECTION***************************************************
SELECT /BIC/COKEY TXTSH from /BIC/TCOKEY into table itab.
SORT ITAB.
IF NOT ITAB[] IS INITIAL.
SELECT BILL_DATE
/BIC/COKEY
BPARTNER
FROM /BIC/AUCSALES00
INTO CORRESPONDING FIELDS OF TABLE ITAB2
FOR ALL ENTRIES IN ITAB
WHERE /BIC/COKEY = ITAB-/BIC/COKEY
AND BILL_DATE = S_BILDT.
SORT ITAB BY /BIC/COKEY.
ENDIF.
*CHECK WHETHER THE DATA RETRIVE SUCESSFULLY OR NOT********************
IF SY-SUBRC NE 0.
WRITE:/ 'THIS DATE DOESNOT CONTAIN ANY DATA'.
ENDIF.
*DATA DISPLAY*********************************************************
*****GET THE FIRST VALUE AND DELETE THE ADJECENT AND DUPLICATE FROM ITAB2.
READ TABLE ITAB INDEX 1.
IF SY-SUBRC = 0.
COKEYNO = ITAB-/BIC/COKEY+4(2).
ENDIF.
READ TABLE ITAB2 WITH KEY /BIC/COKEY = itab-/BIC/COKEY.
IF SY-SUBRC = 0.
SORT ITAB2 BY /BIC/COKEY.
DELETE ADJACENT DUPLICATES FROM ITAB2 COMPARING /BIC/COKEY.
ENDIF.
LOOP AT ITAB.
READ TABLE ITAB2 WITH KEY /BIC/COKEY = itab-/BIC/COKEY.
*IF THE D.C ARE NOT SAME THEN DISPLAY THE SUM***************************
COKEYCH = ITAB-/BIC/COKEY+4(2).
IF ( COKEYCH <> COKEYNO ).
FORMAT COLOR = 4.
WRITE:/ ' TOTAL NUMBER OF D.C IN PERTICULAR RAO ','(', COKEYNO,')','=',TOTCOKEYDIV.
WRITE:/ ' TOTAL NUMBER OF CONSUMER PROCESSED IN RAO ','(', COKEYNO,')','=',TOTAL.
WRITE:/ ' TOTAL NUMBER OF D.C PROCESSED IN RAO ','(', COKEYNO,')','=',PROCOKEY.
WRITE:/ ' TOTAL NUMBER OF D.C NOT PROCESSED IN RAO ','(', COKEYNO,')','=',NOTPROCOKEY.
WRITE:/ '', 128 'PAGE NUMBER:', 139 SY-PAGNO.
SKIP 4.
*******INITIALLIZE ALL THE VARIABLE*************************************
FORMAT COLOR OFF .
TOTCOKEYDIV = 0.
TOTCOKEYDIV1 = 0.
TOTCOKEYDIV2 = 0.
TOTAL = 0.
PROCOKEY = 0.
NOTPROCOKEY = 0.
WRITE:/ SY-ULINE.
NEW-PAGE WITH-TITLE.
NEW-PAGE WITH-HEADING.
ENDIF.
**END OF THE TOTAL SUM OF ALL THE D.C.**********************************
*IF THE D.C ARE SAME THEN DISPLAY THE D.C.******************************
IF ITAB2-/BIC/COKEY = ITAB-/BIC/COKEY.
SELECT COUNT( DISTINCT BPARTNER )
INTO COUNT
FROM /BIC/AUCSALES00
WHERE /BIC/COKEY = ITAB2-/BIC/COKEY and
BILL_DATE = S_BILDT.
IF SY-SUBRC = 0.
PROCOKEY = PROCOKEY + 1.
ENDIF.
TOTCOKEYDIV1 = TOTCOKEYDIV1 + 1.
TOTAL = TOTAL + COUNT.
COKEY = ITAB2-/BIC/COKEY.
FORMAT INTENSIFIED ON COLOR = 2.
WRITE:/ ITAB2-/BIC/COKEY, SY-VLINE,
15 ITAB-TXTSH+1(19), 39 SY-VLINE,
40 COUNT, 60 SY-VLINE,
' ', 105 SY-VLINE.
WRITE :/ SY-ULINE.
FORMAT INTENSIFIED ON COLOR = 2.
ELSE.
FORMAT INTENSIFIED ON COLOR = 2.
COKEY = ITAB-/BIC/COKEY.
WRITE:/ ITAB-/BIC/COKEY, SY-VLINE,
15 ITAB-TXTSH+1(19), 39 SY-VLINE,
40 ' ', 60 SY-VLINE,
'Data Not extracted to BW', 105 SY-VLINE.
FORMAT INTENSIFIED ON COLOR = 2.
WRITE:/ SY-ULINE.
TOTCOKEYDIV2 = TOTCOKEYDIV2 + 1.
ENDIF.
TOTCOKEYDIV = TOTCOKEYDIV1 + TOTCOKEYDIV2.
NOTPROCOKEY = TOTCOKEYDIV - PROCOKEY.
COKEYNO = ITAB-/BIC/COKEY+4(2).
CLEAR: ITAB, ITAB2.
ENDLOOP.
===========================================================
please at this and let me know..
thanks in advance,,,HI ALL ,
I GOT THE ANSWER...
THANKS TO SDNNNN AND ALL THE FRIENDS LOOKING AT THIS...
THANKS ONCE AGAIN.... -
IPod Touch skips (jumps to the end of) the first track. Bug?
Hello,
I'm experiencing the following problem with my iPod Touch and was unable to find any information about similar cases in different forums:
I have several Audible.de audiobooks on my iPod that are by default listed under "audiobooks". Recently I noticed that sometimes my Touch would jump over the first track of a music album when I would start playing the first song, directly jumping to the end of the track and starting to play the second (while the status dot stays at the end of track 1 for a while). It looks as if I had fast forwarded to the very end of the first track - and it happens with the first track only.
I've removed all the music and books from my Touch and moved it back using iTunes, but this didn't help for long. If I completely turn off the Touch and turn it back on, the problem is solved for a moment. I kept asking myself why the problem would reoccur and it seems to me that it has to do with the audiobooks I'm listening to often. I tried the following:
1. Switched off and on. Listened to music without any title jumping problem.
2. Opened an audiobook and listened to it for a few seconds.
3. Went back to music (any album) - the Touch jumps over the first track.
This leads me to believe that listening to audiobooks (maybe just audible audiobooks) creates this problem.
I also found out that after starting to play the first track (which gets immediately jumped over or, more exactly, to its very end), I can "heal" the Touch (until I listen to an audiobook again) by pressing Pause, then the back arrow twice so that I jump to the beginning of the first track, then back to the album cover and track list. After that, I can listen to music as long as I want to without any skipping or jumping, as long as I don't play an audiobook.
To me, this sounds like a bug, but I can't tell if Audible or Apple is to blame. Besides, I don't see an easy way to contact Apple about a bug that might be related to their OS, which I find upsetting (they hide their contact adresses so well that you can't tell them about bugs in their own software, or you have to pay for expensive calls?).
Maybe someone knows what to do or has already heard about a similar problem. I try to circumvent a complete reset of my iPod, as I have lots of apps that are arranged into many different groups. I'd prefer not to sort all of them again, but if resetting the iPod seems to be the only possible solution, I would try that of course. Of course I'd appreciate if someone could tell me how to fix this or whom to contact about it.
Thanks (also for reading this long description),
Alex
Message was edited by: alexhagerHi MikeSpike,
Thanks for your comment! Have you tried everything to resolve it, like resetting the iPod as a new device after deleting the IPSW from your computer first? Does the error still occur?
In fact, I cannot reproduce the problem using podcasts (they work fine for me, as far as I can tell there's no effect between podcast and music on my device), but it may very well be that the error is the same or a similar one (this would be for Apple to investigate, I'll forward parts of your comment to the Apple Advisor taking care of my case, if you agree).
Yes, it is the first track. Although I had one rare occasion where only track 2 was skipped and another one where tracks it happened to tracks 1 and 2 (no shuffle, no remember position activated), the highly reproducible issue touches track # 1 only.
Thanks for precising that you're using a BT headset. Could you please tell me which one, in case that matters? Has your iPod sometimes reacted weirdly when you used your BT headset to remote control the iPod, for instance skipping more titles than you wanted when you pressed "forward"? This is kind of what happened to me on my iPad and since then I've noticed the error appear on the iPad too.
Regarding your other issues, I cannot confirm the podcast problem where a podcast starts at some random point. Podcast seem to work fine in my case, but maybe all of this is caused by one and the same error. Let's hope Apple will find it all and fix it in an update asap.
Also, I don't have the artwork problem where an album displays artwork from a different album. I have had a case where a few tracks of one specific album (and just that one) were not displaying the artwork at all, although everything was properly tagged using the software MP3Tag. If you haven't reset your iPod (as a new device, not from the backup), maybe this would at least resolve some of your problems?
While my problem is just annoying for people like me who simply want their new device to work without any errors (even if there's an easy temporary fix or workaround to these errors so that I could live with it), your errors sum up to a nuisance that makes it hard to enjoy using the device. Having wrong artwork displayed with albums (or none at all) and podcasts being played at random positions is certainly not what you'd expect from such an expensive device.
Have you thought of contacting Apple about it? Not only might they have a solution for your specific problems, but it might also be more convincing if more people would independently report the first-track-skipping-issue we're all experiencing! What they need to know is that the bug is global, not just a corner case, and that it seems to be somehow related to their iOS. They couldn't afford ignoring it if several people would complain about this, especially now that a new iOS beta is already out!
Maybe some other users who read this thread have made similar experiences without paying attention to it? To all other forum users: would you please try if you notice anything weird like first tracks being skipped, either music or podcast? Maybe related to audiobook listening, maybe related to BT headset use? I'd be happy to forward any observation to Apple (to the existing issue case number) in order to better convince Apple to investigate this - asap.
Thanks again, MikeSpike, of course I will keep you all updated if I hear back from Apple! -
Hi friends,
I need to add one horizontal line for the detail section at the end of the page.
I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
Is there any feature to find end of the Page.
I want report format like this.
set id | set name | date Name
1 x dddd vijay
dddd sarathi
dddd reddy
(End of the page)
Thanks in advance...
vijay.Do you know how many detail records are showing up per page?
If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.
Maybe you are looking for
-
Hi, I am able to run that piece of code inside my IDE, it is an https request that requires client certificate, i have followed the JSSE instructions on using SSLSocket . i created a keystore which contains the self signed server certificate and refe
-
Hi, I've made a scenario using XI 3.0. I use a file adapter with an inbound synchronous interface to send a xml file to XI. XI consumes a function from CRM using a RFC adapter and an outbound synchronous interface. I've setted "Best Effort" as qualit
-
Adobe Premiere Pro CS5 5.5.2 update now available
The Adobe Premiere Pro CS5 5.5.2 update brings Mercury Playback Engine support for NVIDIA 'Maximus' configurations, where a Tesla card can work alongside a Quadro card for increased GPU processing power. The update also fixes issues which prevent the
-
Error in SAPLogon executing a Workitem from Outlook.
Hi everyone, I have set the communication between SAPWorkflow and Outlook, SAP send the workitems to the Internet account for each user without any problem. The situation that I got is when Iu2019m executing the Workitem from Outlook and It try to m
-
Hello, I am using OracleXMLQuery to extract data from a database as XML. Some of tables have thousands and thousands of records. I have experimented with setting maxRows to reduce memory usage, but have discovered that it is very slow. During each it