Present style of the Chapter Heading of the excisable Items...

As per the present style of the Chapter Heading of the excisable Items, there is no dotsu2026 itu2019s a plain number without dotsu2026 Is it possible in SAP B1 2007 B PL 7?

If you need to print out the Chapter Heading with dot, you could use formula to reach your goal.
Thanks,
Gordon

Similar Messages

  • CIN - BED, AED & SED for the excise item is ZERO

    DEAR ALL,
    I am testing the CIN scanario with tax procedure TAXINJ.
    While making GRN at excise invoice tab message is coming " BED, AED and SED for the excise item is zero" adn no any values for BED, AED and SED are flowing,
    Value for BED is maintained in J1ID for the chapter ID. Also Tax code is created with JMO1 - IN: A/P BED deductible and value mainatained is 14 %.
    PLease confirm me where I amd doing wrong ? Also please tell in TAXINJ on what paramaters the excise flows and shows the values while GRN OR whil posting a excise invoice ?
    Regards,
    Rakesh

    Dear ALL,
    Below are the steps / settings I have done,
    01. Copied TAXINJ to create tax procedure say ZAXINJ and assigned to country IN.
         - Please confirm what needs to be AltCty & AltCBV for JMO1, JMOD, JMOP ?
    02. Excise defaults maintained as per TAXINJ for ZAXINJ.
    03. Acces sequenece maintained for JMO1, JMOP, JMOD is MWST - Tax code.
    04. Then created Tax code say T1 - and % maintained as below
           JMO1 - 100 %
           JMOP - 100 %\
    05. J1ID - maintained for vendor, plant, material etc.
    05. Excise rate maintained in J1ID for chapter ID as 14 %.
    06. Chapter ID maintained in material master.
    07. PO created for the material with tax code T1 for the said vendor.
    Still while GRN message comes "BED, AED & SED for the excise item is ZERO" and BED is not getting populated for BED.
    Please confirm where I went.
    Waiting eagerly for the valuabale inputs..
    Regards,
    Rakesh

  • BED, AED and SED for the excise item is zero,Message no. 4F122

    Hi,
    While doing GR system issuing msg "  BED,AED and SED for the excise item is zero.Message no. 4F122,
    Chapter ID,mat chapter ID Comb,Cenvat determ,Vendor excise ,excise tax rate Maitained properly and cross verified twise.
    We are using TAXINJ procedure. Tax code maintaied and % maintained for Tax code.
    Any bady point out what exaclty CIN config missed out? why PO tax value are not flowing in MIGO.
    After manully putting value in MIGO also excise invoice (Capture excise invoice ) is not getting created. i am not able to view in J1IEX.
    Regards,
    Anil

    Hi anil kumar,
    I think you have maintained the any of these Excise details.
    Maintain
    >Chapter ID
    >Material & Chater ID Combination
    >Assesable Value
    >Cenvat Determination
    >Vendor Excise Details ( Check the Excise Indicator) as 1
    >Check the tax code assigned
    Please maintain and let me know.
    Thanks,
    Swamy H P

  • Cancelling the GR the excise item tab is not coming after flagging the OK

    Hi SAP Experts,
    there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
    Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
    But while cancelling the GR the excise item tab is not coming after flagging the OK.
    This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
    Thanks & Regards,
    Anisha Sinha

    still not cleared

  • BED, AED and SED for the excise item is zero

    Dear ALL,
    I am working on IMPORT MATERIAL  GOODS RECEIPT,  
    While  doing MIGO  in excise  item tab  BED, AED, SED   values  are  visible  and  material document is  generated, but while posting  PART1 ENTRIES  through J1IEX  System is throwing error" BED, AED and SED for the excise item is zero"  and the  excise values are not flowing in to PART1, 
    IN J1IEX PART1 Entries
    1.IN DUTY RATE TAB all the entries like BED, AED, SED are zero,
    2. IN DUTY VALUES TAB all entries are zero
    ERROR MESSAGE NO 4F122
    Please suggest
    ARABBAS

    Dear,
      Please check this,
      [Excise;
      [BED Value not defaulted in GR;
    Sandip

  • Change description of the Excise item tab in MIGO

    Hi,
    We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
    Please suggest me any config.
    Thanks
    Shital D

    Hi,
    The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
    You can not change here  &  you have few options to declared the material under which material categories.
    You can keep all raw material as raw material & Consumable as asset.
    But if your business needed very much, Just have a discuss with ABAPer for your requirement.
    Regards,
    Biju K

  • How can I change the paragraph style of the Table of Contents entries themselves?

    From what I can see, all Table of Contents entries are the same font, size, indentation and layout when the book is viewed in Portrait mode on an iPad. I have long subheadings in my Table of Contents, and they get truncated!
    How can I modify the style definition of the TOC entries themselves so that they will display in a smaller font size with less indenting, etc.?

    Modifying the TOC: http://support.apple.com/kb/PH2752?viewlocale=en_US
    Have you tried altering the style of the default items on the TOC page?

  • Show the presentation variable on table column header

    hi, experts,
    is it possible to show the presentation variable on the table column header.
    I have created a edit box with presentation variable on the prompt.
    I would like to show the value the user entered on the column header because the values under that column are driven by the presentation variable.
    Thank you very much!

    You cannot put variables in the column headers, as they get considered as text and the same shows in the reports.
    However, you can use the session or repository variables in the alias field in the presentation layer.
    You should make sure, that in this case, all the calculations are done in the BMM layer and not in answers, for the columns where you will be using the variables.

  • I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

    I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

    First try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder.
    3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.
    Next, if necessary, continue with the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How can i give multiple paragraph styles on the same line

    i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
    actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
    Is there any way to do this ????

    YaneshTyagi wrote:
    i want to give different paragraph style in the same line in an indesign document. bt when i tried it, it is coming in two different line.
    actually i am doing a project in which Frame maker document is transformed into indesign document. in frame maker this is possiable, but in indesign i cannot give different paragraph style in the same line of the document.
    Is there any way to do this ????
    Hi, Yanesh:
    Please understand, the FrameMaker feature known as a run-in paragraph, which is a paragraph with a "carriage return" but without a "line feed," HAS NO COUNTERPART in InDesign. InDesign also lacks the FrameMaker side heading feature, which is created by the combination of a reserved area in the text frame and the paragraph property to inhabit that area. FrameMaker separates paragraphs by using the larger of space below paragraph and space above paragraph, but InDesign separates paragraphs by adding the space below paragraph and the space above paragraph.
    There are several complicated manual methods of simulating these FrameMaker properties in InDesign.
    Here's a recent forum discussion of these exact issues: http://forums.adobe.com/message/3759635#3759635. The thread mentions DTP Tools' conversion tool, the MIF Filter commercial plug-in for InDesign, and discusses its shortcomings. I don't recall it mentioning in-tools.com plug-ins that can simulate side headings, like those in FrameMaker, but they don't convert FrameMaker to InDesign. 
    You can add your vote for InDesign's developers to include these FrameMaker features, and any others you'd like to see, here: wish.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • How do I stop ID from assigning a paragraph style to the TABLES?

    In-Design is adding "H1" paragraph style to EVERY table is inserted, so the table headers formatting is affected by that H1 style.
    I guess it chooses H1 because it's the FIRST style I created (and then modified the "basic paragraph" to modify the rest of default text).
    It's like it's adding "Style_ID=1"
    I tried placing the character in different places, to make sure it's not the style the cursor is in which is inherited, and no, no matter where I place the cursor, when I "insert table" the cursor is automatically placed into the first cell (header cell) and the paragraph "H1" is selected (and applied)
    Adding a table with NO headers does the same, so it's not me that confused style names and applied some to the wrong place.
    H1 is not used and table and cells styles are not based in it.
    I don't know whether it's a bug, but IT FEELS like a bug.
    How do I expect it to work?
    I expect that by creating a table, NO style be applied other than the table's. (Not even the basic one)

    You might have set the default paragraph style for the document (which you set by selecting a paragraph style with no text frame selected) to your H1 paragraph style.
    Make sure it's on "Basic paragraph" when you select the type tool..

  • How do I apply a style to the rich text editor in 10.1.2

    I am trying to add text items to a portlet. How do I maintain the style for item text?

    that implies to constrain the styles in the RTE (instead proposing too much choices : font, size etc..)
    A method:
    customize the RTE by reducing the styles to a choice between standard HTML styles (header 1, header 2, body text, paragraph,..).
    Then map these styles to the css styles propsed by Portal.
    As a sample, get all the css from your portal by typing:
    http://<you.machine>/pls/portal/PORTAL.wwv_setting.render_css?p_lang_type=NOBIDI&p_subscriberid=1&p_styleid=12&p_siteid=0&p_rctx=P
    for RTE customizing: http://www.oracle.com/technology/products/ias/portal/pdf/cm_rte_10gr2_features.pdf
    Patrick.

  • Multiple presentation servers using the same RPD

    Hi everyone,
    So as most people know, the iPhone has a cool app that allows you to login and look at your OBIEE content. In theory it's really cool, but as it turns out, a lot of the cool graphs default to Flash and Flash is not supported by the iPhone.
    Using a flag in the instance config file, its possible to default all graphs to png's instead of Flash. But that causes all the interactive drillability to go away since it's just a flat picture.
    It seems that an elegant solution to this issue would be to have two presentation services running; one that defaults to Flash and one that defaults to png's. Then let the OC4J container determine if the device accessing the website is a mobile device or a full client browser. Mobile devices get routed to the png's and non-mobile devices go to the standard Flash page.
    Although not supported by Oracle, it is possible to setup multiple presentation services on the same server. In fact, RNM has a great blog about how to accomplish this (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/).
    I was able to setup two presentation services (AnalyticsWeb and AnalyticsMobile) and point them at the same catalog folder. That way you don't have to duplicate you're work.
    The one thing I couldn't figure out how to do was to point them at the same RPD file. Ideally, we would have one rpd file with the master metadata definitions, and both presentation services would drive from that single RPD. However, the BI Server throws and error of the same RPD appears twice in the NQSConfig.ini file. I also created a shortcut to the master RPD, but upon startup, the BI Servers said that it was not a valid repository file.
    Worst case scenario, I could just use copy & paste to duplicate the single repository. And then each time I updated one, I would just need to delete the other and re-copy. But that seems a little tedious and I was hoping for a more elegant solution.
    Does anyone know how I could get the NQSConfig.ini to let me point to the same RPD twice? Is there some kind of symbolic link or image I could create?
    If it helps, I'm working with OBIEE 10.1.3.4 on a Windows Server 2003 environment with the OC4J standalone container.
    Thanks for the help!
    -Joe

    Hey Everyone,
    Just to add the finishing touch to this thread, the following can be implemented to perform the redirect based on mobile versus traditional PC devices.
    In the folder: C:\OracleBI\oc4j_bi\j2ee\home\default-web-app
    I created the following OBIEE.html file
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html lang="en,us">
    <HEAD>
    <TITLE>Test OBIEE Redirect Page<TITLE>
    </HEAD>
    <BODY>
    <script type="text/javascript">
    var agent = (navigator.userAgent).toLowerCase();
    var weburl = './analytics/';
    var moburl = './analyticsMobile/';
    var reg_exp = /(ipod|iphone|android|opera mini|blackberry|palm os|palm|hiptop|avantgo|plucker|xiino|blazer|elaine|windows ce; ppc;|windows ce; smartphone;|windows ce; iemobile|up.browser|up.link|mmp|symbian|smartphone|midp|wap|vodafone|o2|pocket|kindle|mobile|pda|psp|treo)/;
    if( reg_exp.test(agent) ) {
         window.location = moburl;
    else {
         window.location = weburl;
    </script>
    </BODY></HTML>
    The javascript gets the USER agent variable and does a regular expression match to see if it's any popular handheld device. If so, it redirects them to the mobile address. Otherwise the user is directed to the standard site.
    All I need to do is pass around the URL:
    http://localhost:9704/OBIEE.html (instead of the standard http://localhost:9704/analytics)
    And users will be dynamically sent to the correct location.
    thanks everyone!
    -Joe

  • GREP help "apply style before the ' – ' and add return"

    Hi,
    I'm a newbie to GREP and not good at code so I need some help.
    I think if I new the code to say " apply Heading Paragraph style to text before the ' – ' and add return.
    Then it would work.
    I'm OK with looping nested paragraph styles.
    This is what I have currently got:
    Nerang Community Respite Centre – 5578 1668
    Provides a podiatry service.
    www.nerangrespite.org.au
    Ozcare Allied Health Program – 5569 6200 / Fax 5578 1331 
    Physiotherapy, occupational therapy, speech pathology, podiatry, dietetics and social work.
    www.ozcare.org.au
    And this is how I need it formatted with styles applied
    Nerang Community Respite Centre (Heading Paragraph Style)
    5578 1668 (Phone Paragraph Style)
    Provides a podiatry service. (Descrip Paragraph Style)
    www.nerangrespite.org.au (URL Paragraph Style)
    Ozcare Allied Health Program (Heading Paragraph Sty
    5569 6200 / Fax 5578 1331  (Phone Paragraph Style)
    Physiotherapy, occupational therapy, speech pathology, podiatry, dietetics and social work. (Descrip Paragraph Style)
    www.ozcare.org.au (URL Paragraph Style)

    Thanks for the help so far. It's working but I still to iron some things out.
    Replacing the em dash with a paragraph space or return is straight forward. But getting the styles applied while doing that is not working.
    Also I want to split the phone and fax separated by the '/" onto separate lines.
    1. Not all the entries are the same see below example.
    This is what I have currently got
    ^p = paragraph
    Nerang Community Respite Centre – 5578 1668^p
    Provides a podiatry service.^p
    www.nerangrespite.org.au^p
    ^p
    Ozcare Allied Health Program – 5569 6200 / Fax 5578 1331^p
    Physiotherapy, occupational therapy, speech pathology, podiatry, dietetics and social work.
    www.ozcare.org.au^p
    Volunteering Gold Coast – 5591 8388^p
    Cerebral Palsy League of Queensland – 5532 2088 / Fax 5591 7725^p
    Provides community access to people with Cerebral Palsy and related disabilities.^p
    And this is how I need it formatted with styles applied
    Nerang Community Respite Centre (Heading Paragraph Style)
    5578 1668 (Phone Paragraph Style)
    Provides a podiatry service. (Descrip Paragraph Style)
    www.nerangrespite.org.au (URL Paragraph Style)
    Ozcare Allied Health Program (Heading Paragraph Style)
    5569 6200 (Phone Paragraph Style)
    Fax 5578 1331  (Fax Paragraph Style)
    Physiotherapy, occupational therapy, speech pathology, podiatry, dietetics and social work. (Descrip Paragraph Style)
    www.ozcare.org.au (URL Paragraph Style)
    Volunteering Gold Coast (Heading Paragraph Style)
    5591 8388 (Phone Paragraph Style)
    Cerebral Palsy League of Queensland
    5532 2088 (Phone Paragraph Style)
    Fax 5591 7725 (Fax Paragraph Style)
    Provides community access to people with Cerebral Palsy and related disabilities. (Descrip Paragraph Style)

  • Style for the button

    Hi,
    it is possible to define style for the button on the form?
    Portal version: 3.0.6.6.5

    leinadjan wrote:
    Hello everybody,
    (I'm using APEX 3.2)
    I get a really annoying problem. I'm using report region to show the selected options in one of my application. When I'm creating or editing that content, I do it in a specialised page. To edit my content, I'm using a standard edit button link in my first column. But the button column is ALWAYS taking too much space in my report, it shouldn't be longer then 30 pixels wide. I 'm trying to use the attribute fields or table attribute fields with style="width:30px;" but it never works. I'm having a hard time following this (and I don't currently have access to 3.2). Although its a different version, suggest you create a similar example on apex.oracle.com to give a clearer idea of the situation.
    The only way I found to do that was by creating a new template and write my new style in the header option. But I was told that I can't edit those tamplate. What template? Who told you this?
    I'm thinking that some substitution strings are missing and that is why it changes nothing.What substitution strings?
    It always helps if you provide precise details of:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)

Maybe you are looking for