Presentati​on Director 4.01/4.03/​4.04/4.08 won't install on T60 - IKernel.ex​e goes to 2gb (!) memory

Well the subject says it all. I'm trying to install Presentation Director 4.01, which System Update told me was available (I currently have 4.0). It starts installing but eventually gets an error in tpinsnpd.dll. So I tried to manually install it and I noticed that IKernel.exe goes all the way up to 2gb memory used, then chugs for a while and EVENTUALLY gets the failure that I had originally seen.
Has anyone else seen this? I would have expected others to report this by now.
Message Edited by MisterBill on 02-17-2009 03:16 PM
Message Edited by MisterBill on 08-11-2009 01:10 PM

I have the exact same problem, so you are not alone

Similar Messages

  • Disable auto feature of Presentati​on Director

    I set up Presentation Director to *always* do a clean desktop and presentation.  Now, I don't like that setting.  But when I invoke Presentation Director (to change it), it automatically changes the display.  I know this is what I asked it to do, but how do I turn it off? 
    Alternatively, is there a way to disable Presentation Director entirely, so that I can just do Fn-F7 to cycle through the "normal" internal/external display settings? 
    Help!

    Never mind -- I ended up uninstalling Presentation Director.

  • L2251p and Presentati​on Director 4.5

    Has anyone tried a monitor with DisplayPort and Presentation Director.  I have PD 4.5 and preset schemes in my image.  My scheme for a 1680 display says "no monitor attached" when I try to select it.  Anybody set one up yet?

    I have the exact same problem, so you are not alone

  • Presentati​on Director V4.50 dock settings

    Hey everyone, I just got some X201's in and when they got rolled out to users I found out that the settings for "When Notebook is docked - Immediately apply this display scheme" and the ability to create new Schemes are gone. I've been browsing the Lenovo site and they don't have a page specific to Presentation Director, or do they keep a page for versioning/changes that I can find. Anyone have any idea on how to get those options back?
    Thanks

    Hi dchiang and chewbee, and welcome to the Lenovo User Community!
    Since it has its own good built-in presentation features, Presentation Director is not supported on Windows 7:
    http://lenovoblogs.com/insidethebox/?p=270
    I don't work for Lenovo. I'm a crazy volunteer!

  • Presentati​on Director - "When notebook is docked" Grayed Out

    I have an X61 and the option in Presentation Director that says "When notebook is docked" it completely grayed out.  I've tried everything to enable this option, but no luck.  Does anyone know how to fix this? 

    Ok, I'm sorry to post this question again, but it's driving me crazy!  In Presentation Director, there is an option that says "When notebook is docked, Immediately apply this display scheme."  However, on my X61, this option is grayed out.  I've tried everything to fix this, but no luck.  It drives me crazy because I want it to automatically display on my external monitor when I dock it rather than having to fuss with it to get it to work.  Does anyone know how to make this option work?

  • CPAN - "No rule to make target ..."

    I'm trying to install perl modules using CPAN on Snow Leopard Server. Regardless of what I attempt to install, I get the error:
    No rule to make target `/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
    It seems this means that I need the Perl header files. Where can I get/how can I install these files?
    Thanks in advance for any assistance you can offer - I'm a newbie at using CPAN.

    lisfolks wrote:
    Oh, and is there a particular order in which the .pkg files should be installed?
    You shouldn't pick and choose anything in Xcode. Just install it all with the default options.
    Unfortunately, I don't think I can help much. I use Perl mostly on Linux.
    Also, you are using Snow Leopard Server. Perhaps Perl is installed in a different location. That seems unlikely, though. What directories do you have /System/Library/Perl? If your Perl install is incorrect, Xcode isn't going to help. The files you are missing are part of the OS install, not Xcode.

  • Macromedia Director MX crash

    2010, 27" iMac, MacOS 10.9 and 10.6.
    I am using a partition for 10.6 to run PPC apps. Suddenly Macromedia Director MX crashed and there nothing I can do to re-install it. I keep getting the same Crash Report. I have trashed the application and everything I know from the system and restarted in safe mode to no avail.
    I have installed the application in another 10.6 partition of the same computer and it works fine. I am including this crash report hoping that it will make sense to some you.
    I don't have a clue. Please give me some suggestions
    Process:         LaunchCFMApp [201]
    Path:            /Volumes/Backup/Applications/Macromedia Director MX/Director MX
    Identifier:      com.macromedia.DirectorMX
    Version:         9.0 (9.0r383, Copyright ©1985-2002 Macromedia, Inc.)
    Code Type:       PPC (Translated)
    Parent Process:  launchd [126]
    Date/Time:       2014-03-08 09:27:20.654 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          3930 sec
    Crashes Since Last Report:           18
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                      F81B7310-52EF-49D4-97A3-F6FBD6812145
    Exception Type:  EXC_CRASH (SIGTRAP)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libSystem.B.dylib                       0x80239236 __pthread_kill + 10
    1   libSystem.B.dylib                       0x80238ad7 pthread_kill + 95
    2   LaunchCFMApp                            0xb80bfb30 0xb8000000 + 785200
    3   LaunchCFMApp                            0xb80c0037 0xb8000000 + 786487
    4   LaunchCFMApp                            0xb80dd8e8 0xb8000000 + 907496
    5   LaunchCFMApp                            0xb8145397 spin_lock_wrapper + 1791
    6   LaunchCFMApp                            0xb801ceb7 0xb8000000 + 118455
    Thread 1:
    0   libSystem.B.dylib                       0x80142afa mach_msg_trap + 10
    1   libSystem.B.dylib                       0x80143267 mach_msg + 68
    2   LaunchCFMApp                            0xb819440f CallPPCFunctionAtAddressInt + 206231
    3   libSystem.B.dylib                       0x80170259 _pthread_start + 345
    4   libSystem.B.dylib                       0x801700de thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
      eax: 0x00000000  ebx: 0x802fc540  ecx: 0xb7fff9ac  edx: 0x80239236
      edi: 0xb8211640  esi: 0x00000005  ebp: 0xb7fff9d8  esp: 0xb7fff9ac
       ss: 0x0000001f  efl: 0x00000286  eip: 0x80239236   cs: 0x00000007
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000037
      cr2: 0x8023922c
    Binary Images:
    0x80000000 - 0x8005dff7  com.apple.framework.IOKit 2.0 (???) <3DABAB9C-4949-F441-B077-0498F8E47A35> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x8007d000 - 0x800e7fe7  libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
    0x80142000 - 0x802e9ff7  libSystem.B.dylib 125.2.11 (compatibility 1.0.0) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
    0x8036b000 - 0x804e6fe7  com.apple.CoreFoundation 6.6.6 (550.44) <F88C95CD-1264-782D-A1F5-204739847E93> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x805de000 - 0x805ecfe7  libz.1.dylib 1.2.3 (compatibility 1.0.0) <33C1B260-ED05-945D-FC33-EF56EC791E2E> /usr/lib/libz.1.dylib
    0x805f1000 - 0x805fdff7  libkxld.dylib ??? (???) <9A441C48-2D18-E716-5F38-CBEAE6A0BB3E> /usr/lib/system/libkxld.dylib
    0x80601000 - 0x80647ff7  libauto.dylib ??? (???) <29422A70-87CF-10E2-CE59-FEE1234CFAAE> /usr/lib/libauto.dylib
    0x80654000 - 0x807d6fe7  libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <60FF302E-5FAE-749B-BC70-0496DC2FBF2D> /usr/lib/libicucore.A.dylib
    0x80838000 - 0x808e5fe7  libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <9F8413A6-736D-37D9-8EB3-7986D4699957> /usr/lib/libobjc.A.dylib
    0x808f9000 - 0x808fcfe7  libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    0xb8000000 - 0xb81defff  LaunchCFMApp ??? (???) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
    0xffff0000 - 0xffff1fff  libSystem.B.dylib ??? (???) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
    Translated Code Information:
    objc[201]: garbage collection is ON
    NO CRASH REPORT
    Model: iMac11,3, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 8 GB, SMC 1.59f2
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.6
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: ST31000528AS, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0xfa111000 / 8
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa120000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Hub, 0x0451  (Texas Instruments), 0x1446, 0xfd130000 / 5
    USB Device: Photosmart D7300 series, 0x03f0  (Hewlett Packard), 0xc702, 0xfd136000 / 6
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3
    FireWire Device: unknown_device, Unknown
    FireWire Device: HDD, Fantom, Up to 800 Mb/sec

    I could not get this issue resolved, so I cloned the HD with a 10.6 from my other computer, re-installed to my problem HD and fixed the issue. I make it a point to keep a spare system/HD/partition to each system I have. It saved my butt this time.

  • Problem to launch Director Trial version on mac - Snow Leopard

    Hy,
    I have a director MX and I want to try new version Director 12. I had download the trial version and I installed it, but when I launch it doesn't start.
    Anyone could help me?
    I'm working on Mac with Snow Leopard 10.6.8.
    Thanks
    Gabrios

    Actually, on Adobe's site, the minimum specs for Director 12 Authoring is OS X 10.7 or higher:
    Director Help | Director 12 | Read Me

  • Director 11 lags

    I updated a Director-file from MX 2004 to Director 11.
    Everything is complete and working fine. Exept for one thing:
    Director 11 lags at one point where I have used a few "Wipe
    Behaviors" It's so annoying!!! There was no lagging in MX 2004, but
    now there is in DR11, and I realy want to use Director 11. Is there
    any setup that I should do? I am very glad if anyone can solve this
    problem!
    But don't tell me that my coputer is too old or slow. It is
    brand new with 2 Ghz, 2GB memory and a graet graphic-card.
    Pleas help my...

    > where the new W3D plugin?
    It shipped with the authoring application and with Shockwave.
    Perhaps
    you mean the W3D SDK?

  • Delete old time machine database directories on backup drive?

    Had the hard drive replaced preemptivly on 2010  iMac under warrenty. Now in finder I see multiple database directories on the time capsule drive, Tims-iMac, and 2 entries called Tims-iMac 3 under the directory Backups.backupdb. (In term I only see one copy of Tims-Imac 3). The older Tims-Imac files start when the old drive was new and end when it was replaced. Time machine only shows the entries in the Tims-iMac 3 database.  I do not need any of the old directories in Tims-iMac anymore. I just added a ton of pictures to the system and would rather use the TM disk space for backups from this instalation. I doubt TM is going to delete entries from the old database when the drive fills up (now). I do not see a way to make TM delete these files or recognize that direcotry as a TM db.
    Is it safe to delete the entire Tims-iMac directory? In finder?

    t.gargrave wrote:
    Had the hard drive replaced preemptivly on 2010  iMac under warrenty. Now in finder I see multiple database directories on the time capsule drive, Tims-iMac, and 2 entries called Tims-iMac 3 under the directory Backups.backupdb.
    Sounds like more than your HD was changed.  Time Machine thinks you got a new Mac.  A new logic board  will do that (it has a hardware address that Time Machine uses to identify your Mac).
    I doubt TM is going to delete entries from the old database when the drive fills up (now).
    Correct -- TM on your Mac won't delete backups (it thinks are) belong to another one.
    Is it safe to delete the entire Tims-iMac directory? In finder?
    Yes, but it will take a very long time to empty the trash (hold the Alt/Option key when you do that.)  If your backups are on a network (Time Capsule, etc.) connect via Ethernet cable when you can leave it for a long time. It will still be slow, but 2-3 times faster than WIFI.

  • Installing Director 11 Trial

    Hello I am contacting you on a problem with adobe director 11
    trial version. I downloaded the program 2 days ago and unpacked it
    to my desktop. Once it was unpacked I went into the folder and ran
    the program "Setup.exe" which should install adobe onto my system.
    Once this has ran I select the destination that I wish the program
    to be installed in and it only installs the shared components but
    doesn't install Director 11. It says after the shared components
    has been installed that Director 11 component failed to install. I
    was wondering if you could help me with this problem. I have
    downloaded director 11 again and it still doesn't work.
    I am running Windows Vista 32-bit OS and I meet system
    requirements.
    Thank you and hope you can help fix the problem.

    Hi trippii,
    First, this forum while hosted by Adobe, is not an official
    source of technical
    support. Occasionally Adobe staff will post here. Mostly,
    Director users will
    reply,
    To your question, have you seen the D11 Installation Technote
    for Vista? It is at:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403191&sliceId=1
    There are known issues with installation and so hopefully the
    Technote will give
    you the answers you're after.
    regards
    Dean
    Director Lecturer / Consultant / Director Enthusiast
    http://www.deansdirectortutorials.com/
    http://www.multimediacreative.com.au
    email: [email protected]

  • Merging two LDAP directories into one clean 10.4 server.

    What I have now is two different OD masters. One is a 10.3.9 server and the other is a 10.4.9 server. What I want to do is combine the two Open Directories into one on a brand new Xserve 10.4.9 install, and make that my only master with several replicas.
    I'm trying to do as much research as possible before attempting this feat. I haven't been able to find much on here via searching. I did however, find this link (http://www.afp548.com/article.php?story=20050615173039158&query=migrate), which should be quite helpful, but I was wondering if anyone on here had anymore input.
    Thanks in advance.

    Hi Celia
    I think you could achieve this using slapcat with a bit of ldapadd/ldapmodify? Manual pages should tell you more?
    Not done it myself with 10.5 but I don't see why not? Export desired information as LDIF file(s). You could do it for for both LDAP Servers and then bring them in. They should just add to each other?
    Worth a try?
    Tony

  • BT Directors please read when you're not too busy ...

    When and how are the Directors of this company, who benefit financially from the profits and savings resulting from their operational decisions, going to account for the abysmal level of customer services?

    This is a customer to customer self help forum posts made here do not go to BT and although the forum is moderated by BT not every post is read
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Can't delete mistakenly created directories in Network

    Somehow a partial address entry (236.96.12) was created as a read-only directory in the Network directory. The other part of the address, 68, appeared as a read-only directory within the first directory.
    I have tried both sudo and a root shell to remove the directories. In each case the system responds that both directories are "read-only file system." I attempted using chmod to write enable the user rights, but I get the same response.
    How can I delete these two directories?
    ken
    Dual 1.42 GHz G4 PowerMac w/2 GB Ram; 1.25 GHz G4 Powerbook w/ 2GB Ram   Mac OS X (10.4.7)  
    Dual 1.42 GHz G4 PowerMac w/2 GB Ram; 1.25 GHz G4 Powerbook w/ 2GB Ram   Mac OS X (10.4.7)  

    From my standpoint, there are no stupid questions on this one.
    The uchg flag is not set.
    How can I tell if the directories are locked? (There are no files in either directory.)
    When I enter "Single User Mode" (cmd-s) nothing has been mounted so the directories are not there. Any suggestions for what I can do here to track the boot process to discover where the offense occurs? (I am not very experienced in this, so let's go easy.)
    ken

  • Multiple plugtmp-1 plugtmp-2 etc. in local\temp folder stay , crossdomain.xml and other files containing visited websitenames created while private browsing

    OS = Windows 7
    When I visit a site like youtube whith private browsing enabled and with the add-on named "shockwave flash" in firefox add-on list installed and activate the flashplayer by going to a video the following files are created in the folder C:\Users\MyUserName\AppData\Local\Temp\plugtmp-1
    plugin-crossdomain.xml
    plugin-strings-nl_NL-vflLqJ7vu.xlb
    The contents of plugin-crossdomain contain both the "youtube.com" adress as "s.ytimg.com" and is as follows:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    -<cross-domain-policy> <allow-access-from domain="s.ytimg.com"/> <allow-access-from domain="*.youtube.com"/> </cross-domain-policy>
    The contents of the other file I will spare you cause I think those are less common when I visit other sites but I certainly don't trust the file. The crossdomain.xml I see when I visit most other flashpayer sites as well.
    I've also noticed multiple plugin-crossdomain-1.xml and onwards in numbers, I just clicked a youtube video to test, got 6 of them in my temp plus a file named "plugin-read2" (no more NL file cause I changed my country, don't know how youtube knows where I'm from, but that's another subject, don't like that either). I just noticed one with a different code:
    <?xml version="1.0"?>
    -<cross-domain-policy> <allow-access-from domain="*"/> </cross-domain-policy>
    So I guess this one comprimises my browsing history a bit less since it doesn't contain a webadress. If these files are even meant to be deposited in my local\temp folder. The bigger problem occurs when they stay there even after using private browsing, after clearing history, after clearing internet temporary files, cache, whatever you can think of. Which they do in my case, got more than 50 plugtmp-# folders in the previous mentioned local\temp folder containing all website names I visited in the last months. There are a variety of files in them, mostly ASP and XML, some just say file. I have yet to witness such a duplicate folder creation since I started checking my temp (perhaps when firefox crashes? I'd say I've had about 50 crashes in recent months).
    I started checking my temp because of the following Microsoft Security Essential warnings I received on 23-4-12:
    Exploit:Java/CVE-2010-0840.HE
    containerfile:C:\Users\Username\AppData\Local\Temp\jar_cache2196625541034777730.tmp
    file:C:\Users\Username\AppData\Local\Temp\jar_cache2196625541034777730.tmp->pong/reversi.class
    and...
    Exploit:Java/CVE-2008-5353.ZT
    containerfile:C:\Users\Noname\AppData\Local\Temp\jar_cache1028270176376464057.tmp
    file:C:\Users\Noname\AppData\Local\Temp\jar_cache1028270176376464057.tmp->Testability.class
    Microsoft Security Essentials informed me that these files were quarantained and deleted but when going to my temp file they were still there, I deleted them manually and began the great quest of finding out what the multiple gigabytes of other files and folders were doing in that temp folder and not being deleted with the usual clearing options within firefox (and IE).
    Note that I have set my adobe flasplayer settings to the most private intense I could think of while doing these tests (don't allow data storage for all websites, disable peer-to peer stuff, don't remember exactly anymore, etc.). I found it highly suspicious that i needed to change these settings online on an adobe website, is that correct? When right-clicking a video only limited privacy options are available which is why I tried the website thing.
    After the inital discovery of the java exploit (which was discovered by MSE shortly after I installed and started my first scan with Malwarebytes, which in turn made me suspicious whether I had even downloaded the right malwarebytes, but no indication in the filename if I google it). Malwarebytes found nothing, MSE found nothing after it said it removed the files, yet it didn't remove them, manually scanning these jar_cache files with both malwarevytes and MSE resulted in nothing. Just to be sure, I deleted them anyways like I said earlier. No new jar_cache files have been created, no exploits detected since then. CCleaner has cleaned most of my temp folder, I did the rest, am blocking all cookies (except for now shortly), noscript add-on has been running a while on my firefox (V 3.6.26) to block most javascripts except from sites like youtube. I've had almost the same problem using similar manual solutions a couple of months ago, and a couple of months before that (clearing all the multiple tmp folders, removing or renaming jar_cache manually, running various antmalware software, full scan not finding a thing afterwards, installing extra add-ons to increase my security, this time it's BetterPrivacy which I found through a mozilla firefox https connection, I hope, which showed me nicely how adobe flash was still storing LSO's even after setting all storage settings to 0 kb and such on the adobe website, enabling private browsing in firefox crushed those little trolls, but still plugtmp trolls are being created, help me crush them please, they confuse me when I'm looking for a real threat but I still want to use flash, IE doesn't need those folders and files, or does it store them somewhere else?).
    I'm sorry for the long story and many questions, hope it doesn't scare you away from helping me fight this. I suspect it's people wanting to belong to the hackergroup Anonymous who are doing this to my system and repeating their tricks (or the virus is still there, but I've done many antivirus scans with different programs so no need to suggest that option to me, they don't find it or I run into it after a while again, so far, have not seen jar_cache show up). Obviously, you may focus on the questions pertaining firefox and plugtmp folders, but if you can help me with any information regarding those exploits I would be extremely grateful, I've read alot but there isn't much specific information for checking where it comes from when all the anti-virus scanners don't detect anything anymore and don't block it incoming. I also have downloaded and installed process monitor but it crashes when I try to run it. The first time I tried to run it it lasted the longest, now it crashes after a few seconds, I just saw the number of events run up to almost a million and lots of cpu usage. When it crashed everything returned back to normal, or at least that's what I'm supposed to think I guess. I'll follow up on that one on their forum, but you can tell me if the program is ligit or not (it has a microsoft digital signature, or the name micosoft is used in that signature).

    update:
    I haven't upgraded my firefox yet because of a "TVU Web Player" plugin that isn't supported in the new firefox and I'm using it occasionally, couldn't find an upgrade for it. Most of my other plugins are upgraded in the green (according to mozilla websitechecker):
    Java(TM) Platform SE 6 U31 (green)
    Shockwave for Director (green - from Adobe I think)
    Shockwave Flash (green - why do I even need 2 of these adobe add-ons? can I remove one? I removed everything else i could find except the reader i think, I found AdobeARM and Adobe Acrobat several versions, very confusing with names constantly switching around)
    Java Deployment Toolkit 6.0.310.5 (green, grrr, again a second java, why do they do this stuff, to annoy people who are plagued with java and flash exploits? make it more complicating?)
    Adobe Acrobat (green, great, it's still there, well I guess this is the reader then)
    TVU Web Player for FireFox (grey - mentioned it already)
    Silverlight Plug-In (yellow - hardly use it, I think, unless it's automatic without my knowing, perhaps I watched one stream with it once, I'd like to remove it, but just in case I need it, don't remember why I didn't update, perhaps a conflict, perhaps because I don't use it, or it didn't report a threat like java and doesn't create unwantend and history compromising temp files)
    Google Update (grey - can I remove? what will i lose? don't remember installing it, and if I didn't, why didn't firefox block it?)
    Veetle TV Core (grey)
    Veetle TV Player (grey - using this for watching streams on veetle.com, probably needs the Core, deleted the broadcaster that was there earlier, never chose to install that, can't firefox regulate that when installing different components? or did i just miss that option and assumed I needed when I was installing veetle add-on?)
    Well, that's the list i get when checking on your site, when i use my own browseroptions to check add-ons I get a slightly different and longer list including a few I have already turned off (which also doesn't seem very secure to me, what's the point in using your site then for anything other than updates?), here are the differences in MY list:
    I can see 2 versions of Java(TM) Platform SE 6 U31, (thanks firefox for not being able to copy-paste this)
    one "Classic Java plug-in for Netscape and Mozilla"
    the other is "next generation plug-in for Mozilla browsers".
    I think I'll just turn off the Netscape and Mozilla one, don't trust it, why would I need 2? There I did it, no crashes, screw java :P
    There's also a Mozilla Default plugin listed there, why does firefox list it there without any further information whether I need it or not or whether it really originates from Mozilla firefox? It doesn't even show up when I use your website plugin checker, so is there no easy way by watching this list for me to determin I can skip worrying about it?
    There's also some old ones that I recently deactivated still listed like windows live photo gallery, never remember adding that one either or needing it for anything and as usual, right-clicking and "visit homepage" is greyed out, just as it is for the many java crap add-ons I encountered so far.
    Doing a quick check, the only homepage I can visit is the veetle one. The rest are greyed out. I also have several "Java Console" in my extentions tab, I deactivated all but the one with the highest number. Still no Java Console visible though, even after going to start/search "java", clicking java file and changing the settings there to "show" console instead of "hide" (can't remember exact details).
    There's some other extentions from noscript, TVU webplayer again, ADblock Plus and now also BetterPrivacy (sidenote, a default.LSO remains after cleanup correct? How do I know that one isn't doing anything nasty if it's code has been changed or is being changed? To prevent other LSO's I need to use both private browsing and change all kinds of restrictions online for adobe flashplayer, can anyone say absurd!!! if you think you're infected and want to improve your security? Sorry that rant was against Adobe, but it's really against Anonymous, no offense).

Maybe you are looking for