Presentation Designer 2011 SP4 Setup Not Recognizing 32-Bit Microsoft Excel 2013

I have 32-bit Microsoft Office Excel (with 2013 office suite) installed. When I try to install the SAP Crystal Presentation Design 2011 software, the setup prerequisite check is stating that I am missing Microsoft Office Excel (XP or higher) 32-bit.
How do I install Crystal Reports Presentation Designer without having to use Microsoft Excel 2003?
Does anyone know when (estimated guess) Crystal Reports Presentation Designer is scheduled to fully support 2013?

Hi,
You have to use SAP Crystal Dashboard Design 2013 which does support MS Office 2013, but I've read that it is not great, so I would not recommend it and to use MS Office 2010 if you can.
Regards,
Josh

Similar Messages

Error installing SAP Presentation Design 2011

I successfully installed Xcelsius Present 2008 trial version and then purchased a registered version of Presentation Design 2011. At the end of installation I received a message that said: "Missing installdir reg key for installiverse, required for uninstall. Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora Value: Path".
I ran the installation setup program as administrator. When that didn't work I logged on as administrator but got the same error message. Each time it installs a folderSAP BusinessObjects in my Program Files (x86) fikder, and I have to delete this folder in order to rerun the installation.
It makes no difference whether I do a Side-by-Side Installation or Perform Simple Upgrade.
I am running Windows Ultimate 64 bit and using Office 2007. I'd appreciate any help in resolving this issue.

Hi,
Dashboard Design and Presentation Design support the following software:
Microsoft Windows
u2022 Windows XP Professional SP2 and SP3
u2022 Windows Server 2003 Standard Edition SP1 and SP2
u2022 Windows Server 2003 Enterprise Edition SP1 and SP2
u2022 Windows Vista SP1 and SP2
u2022 Windows 7
For a current list of supported operating systems and hardware requirements, see the Dashboard
Design and Presentation Design Supported Platforms documentation available at
https://www.sdn.sap.com/irj/boc/articles.
Microsoft Excel
u2022 Excel XP SP3 (or later)
u2022 Excel 2003 SP1, SP2, and SP3
u2022 Excel 2007 SP1 and SP2
Adobe Flash
u2022 Flash Player with ActiveX 9.0 (or later)
11
@Sri

Problems with Excel xlsx files and Presentation Design 2011

Hello,
I just began using Presentation Design 2011 and have run into an issue and would really appreciate your help.
I have very large files in Excel 2007 format (.xlsx) that I need to import into Presentation Design. When I try to do so, it automatically opens the .xlsx file as a 97-2003 Excel file, and in hte process, I then lose a large portion of the data (the file is very large, and the space limitations in 97-2003 are not sufficient for all the data I have, so I receive a message about compatability indicating that the data goes beyond the space limit).
I have tried looking online for a fix to this issue, and I cannot find it. I just installed the service pack 2 patch 8 file, and this still does not work.
Will someone please let me know what I need to download or do to be able to import the xlsx files and maintain them in that format?
Thank you!
Curtis

Hi Curtis,
In the older version of dashboard design 2011, xcelsius 2008, .xlsx(excel 2007) files are imported and converted automatically to excel 2003 format. So there are some compatiability issues with both versions and also size limitations. excel 2003 cannot have more than 256 columns. I doubt same is the case with new version.
Inside the designer data is in excel 2003 format. So you cannot have data more than the limit and some formats. You should only be pulling in enough data to fill your components in dashboard and remove any unnessary information from the spreadsheet . Since dashboards are meant for summary data, importing very large excels files are not recommended.
Hope it helps you.
Regards,
Nikhil Joy

Microsoft Excel 2013 add-in not working after update

I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!

I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?

CS6 Design Standard upgrade serial not recognized

I just recently purchased upgrades for three Adobe CS5 Design Standard to CS6 Design Standard and when I try to apply the upgrade serials it says the serials are not recognized as valid. I downloaded CS6 from the link in my order, installed, and tried to apply the license and it will not work. Is there something that I'm missing in the process?

Contact support.
Mylenium

USB microphone not recognized by mbp, retina, late 2013, 10.10.1 Yosemite.

I bought a Behringer Xenyx302 USB preamp to connect a microphone to my mbp. The device is not recognized by MacOS. Preferences / Sound / Input only lists the internal microphone. Based on other posts and documentation, I should see and entry for "USB microphone" or something like that.
The preamp has a headset jack. I can hear the microphone working through that, so I know the mic works.
Behringer doc says that no drivers or software are required for MacOS. 15" mbp, retina, late 2013, 10.10.1 Yosemite
Any suggestions?

Yes I have checked Parallels config along with Parallels support. Also on the mac side it also does not see or recognize USB 2 devices
any other thing to try?
Rich

Not recognizing 64 bit windows 7 file

Bootcamp will not recognize my 64 bit windows 7 Iso. When I select it and the destination usb drive then hit continue it tells me it is not a 64 bit version. Anyone have a similar problem and find a solution?

Thank for your reply,This is the downloaded trial version i downloaded from Adobe website,I'm buying my new camera in about a month and want to get a headstart on learningsome editing before I put out all the money for this and software,Thanks,
Date: Mon, 19 Mar 2012 16:00:34 -0600
From: [email protected]
To: [email protected]
Subject: Installer does not support 64 bit windows 7
    Re: Installer does not support 64 bit windows 7
    created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Which disc are you installing from? Also did you just purchase Premiere Elements 10 or did you buy the bundle which includes Photoshop Elements 10?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4276739#4276739
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4276739#4276739. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

MBP Late-2011 hard drive not recognized

Okay, so last November 2012, not even a year after I bought my MBP, it just froze and wouldn't respond to anything. All it showed was the rainbow loading circle and the computer crashed. I brought it to the Apple store and the person behind the Genius bar said that it was a hard drive problem and he replaced it. However, ever since then, I noticed that my mac has been running very slow and programs would take a lot longer to load.
5 months later, my computer is having problems again and one time when I turned it on, it just showed a blinking folder with a question mark. I know this means it can't find the system software. I brought it to a friend and he tried to fix it first by using the OS X system software disc but that didn't work. Then he thought the problem was the hard drive cable so I bought a new one and when he replaced it, my hard drive still isn't recognized. At this point he thinks it's something with the logic board or something since nothing seems to be working. Right now, all I'm doing is connecting my hard drive to the USB and using booting from there. Everything else is working fine. Does anyone have any suggestions as to what I can do? (btw, I don't have AppleCare)
Thanks.

The good news is that it is not the logic board, other wise the MBP would not function at all. The symptoms that you describe are a strong indication that the internal HDD connection is faulty.
As mentioned before, have the technicians at the genius bar look at it and if I am correct, they should be able to install a new cable and allow you to use the MBP with the HDD inside the MBP. This is not an expensive repair.
It is also possible that the replacement cable that was installed earlier was not done correctly.
Ciao.

Can be use SAP Crystal Presentation Design 2011 in Windows 8 and Microsoft Office 2013?

I had problems in converting a design to a presentation in Power Point, but I have no problems in Word and PDF, why?

Hi Marco,
Please repost to the BI Dashboards space.
-Abhilash

Guide Builder in Designer 8.2.1 not recognizing Flash 10

Hi,
I am attempting to open Guide Builder from Adobe Designer 8.2.1.3144.1.471865 and I am getting the following error:
You must install the Adobe Flash Player 9 control to use Guide Builder.
The latest Flash Player Active X control can be downloaded from http://www.adobe.com/go/getflashplayer.
Now the thing is, I have flash 10 installed on my PC, and I also gone to the download site listed, and got the latest flash player. Which is again Flash 10. It's obvious that something is wrong here.
I've also found an old copy of Flash 9 in my downloads directory. I ran that, then tried running Guide Builder again... same problem. I tried opening Guide Builder up with a new form. Same problem.
Is there another patch I need to install, or do I have to roll back somehow to Flash 9?
Any assistance would be greatly appreciated.
Regards,
Steve

I am using SP2 and I just started getting the problem too. I have both Flashs installed 9 and 10. Guide Builder will not open and errors that I need Flash 9 installed although it is already there... HELP

Adobe flash 14.0.0.0.125 broke all my presentation design 2011 models

Is there another answer other than regressing to the last version?
Pete

Hi!
I have the similar problem with adobe flash 14.0... I can't export my Dashboards to html. I tried to install previous version of adobe flash player (13.0.0.223). I can install flashplayer13_0r0_223_win (for other browsers) but I cant install flashplayer13_0r0_223_winax (for IE) :
How can I install Adobe flash player 13 Active X (ofr IE) ?

Not recognizing 64-bit installation

itunes keeps saying i cannot sync my phone with my itunes account because I need to install the 64-bit version of itunes. But i have uninstalled and reinstalled the software multiple times and it is the 64-bit version that i am installing.

I'm having the same issue. Did you get any type of resolution to it?

IPod not recognized in iTunes after update/restore

I was prompted by a message (don't remember the exact verbage) in iTunes to restore my iPod. It appeared to download and install an iPod update. Then when iTunes restarted, the iPod was no longer recognized by iTunes. The iPod still charges and iTunes still starts when it is plugged in but no devices are listed.
A connectivity test shows: iPod service is running, iTunes Helper is running, Apple Mobile Device is running. USB ports verified, FireWire (IEEE 1394) ports verified, iPod found. All tests passed.
The iPod is still visible in Windows but when I attempt to navigate into H:\iPod_Control\iTunes or H:\iPod_Control\Music I get the message: "(directory) is not accessible. The file or directory is corrupt and unreadable."
I have done the first 4 of the 5 R's; obviously not able to restore presently as the iPod is not recognized. I tried manually setting to disk mode- no luck. I tried uninstalling/reinstalling iTunes as well.
Any suggestions are greatly appreciated.
Message was edited by: Sgt Howie

Hi. I had the exact same problem that you identified. I came across a tip somewhere to delete the contents of the pictures folder. When that didn't work for me I figured I'd go for broke and format the darn thing. From windows explorer I right clicked on the ipod volume (for me it was J: drive) and format. After I unplugged and replugged the usb cord, iTunes recognized the ipod again.
Hope that helps.

My iMovie on my 2011 iMac does not recognize video taken on my new iPad, is there a way to resolve this? I would like to take movies on my iPad and make movies in iMovie on my iMac.

My iMovie on my 2011 iMac does not recognized videos taken on my new iPad. Is there a way to correct this, or perhaps I am doing something incorrect. When I connected my iPad to my iMac, iPhoto popped up, but not iMovie.

You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
http://support.apple.com/kb/HT4792

Recovery partition not recognized

Hi all
I received today my new HP ENVY 17-J010EL.
The recovery partition IS present [RECOVERY D:], but seem not recognized.
HP Recovery Manager say: "Recovery Partition has been removed - The Recovery Media creation option is no longer available".
I touched nothing inside RECOVERY D:
Is there a way to solve it?
Thank you
This question was solved.
View Solution.

Hi
HP uses OEM Disc hence product key is in built on the disc itself and will be pre-installed on your unit you dont have to worry about the activation.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Presentation Designer 2011 SP4 Setup Not Recognizing 32-Bit Microsoft Excel 2013

Similar Messages

Maybe you are looking for