Presentation Layer model not appearing in Subject Area (OBIEE 11g)

Hi All
I have created the OBIEE metadata for an OLAP cube using the following steps:
1. Created and Maintained a single OLAP cube using AWM (5 measures and 3 dimensions).
2. Created new OBIEE metadata repository using BI Administrator.
3. Exported CUBE metadata to OBIEE Administrator using OBIEE Plug-in for AWM.
4. Saved the new repository after checking for global consistency.
5. Uploaded the new repository to BI server using BI Enterprise Manager (http://localhost:7001/em).
6. Restarting all BI services from Enterprise Manager for repository changes to take effect.
7. Create a new user using Weblogic Console in Security Realm 'myRealm' and assigning it to group 'BIConsumers' using (http://localhost:7001/console).
8. Logging into BI Analytics as new user using (http://localhost:9704/analytics)
But for some reason, the cube is still not showing up under the 'Subject Area Contents'. Am I missing any step in between?
My platform is as folllows:
- Oracle Business Intelligence EE v. 11.1.1.3.0
- AWM 11.1.0.7.0B
- Windows 2008 Server (32-bit)
Any assistance will be appreciated.

This would be a better forum for this
Business Intelligence Suite Enterprise Edition
Business Intelligence Suite Enterprise Edition

Similar Messages

Multiple Subject Area - OBIEE 11g

Hi,
I have to do cross-subject area operations in OBIEE 11g. Here is what I have found out:
1. There is an option to use Union/Intersect operations which creates a Union query
2. There is an option to use 'Add/Remove Subject Area' which can be used to combine Attributes/Facts across multiple Subject Areas.
I am looking forward more details on second point above but unfortunately there isn't an official document by Oracle on it.
As I understand, by using 'Add/Remove Subject Area', OBIEE does not create a UNION query but it combines the attributes as if they are used through same Subject Area. So, it is not a typical join as I dont see something like Subject Area 1.Key = Subject Area 2.Key in Query log which brings me to a question:
Is it possible to use the option to combine attributes across Subject Area based off Multiple BMM in RPD? I think the answer is NO because I don't think there is a way for OBIEE to combine results sets from different BMM.
Thoughts?

I am afraid but I am not able to follow your suggestion. I will try to make it very simple:
1. We create Subject Areas in RPD
2. Each Subject Area will be based on BMM created in RPD. Now, you can have multiple Subject Areas which are again based on BMM itself.
3. I can also create multiple BMM within RPD.
Something like:
BMM A, Subject Areas - 1A and 2A
BMM B, Subject Areas - 1B and 2B
From above, consider you have created two BMM's - A and B and within each BMM there are two Subject Areas. 1A and 2A in BMM A and 1B and 2B in BMM B.
Now, when I logon to Answers, when I click on New->Analysis, I would see four Subject Areas - 1A, 2A, 1B and 2B. Suppose I select 1A. Now, when I try to use Add/Remove Subject areas option, I can only see 1B (because both of them are from same BMM - A). I won't see 2A and 2B.
So, this brings me to conclusion that you cannot combine attributes from different BMM using 'Add/Remove Subject Areas'. You can however use UNION/INTERSECT to do the operation but Add/Remove Subject Areas is limited to be used when your Subject areas are connected in the same BMM.
Is my understanding correct?

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5? Thank you.

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5?
Thank you.

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Repository / catalog not working, missing subject area

on Windows 2003 R2 64bit Server.
If I create a new rpd my BI Server Service wont start.
If I copy an existing rpd like paint.rpd and (delete the catalog so a new one is created, or create a new catalog, or copy an existing catalog) I get the following error:
Oracle BI Presentation Services have started successfully.
Type: Error
Severity: 40
Time: Tue Aug 25 22:50:05 2009
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-3264
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.soap.makesession
saw.soap.sessionrequesthandler
saw.SOAP
saw.httpserver.request.soaprequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Acces
s for the requested connection is refused.
[nQSError: 43037] Invalid catalog, D:\OracleBIData\web\catalog\sh_public, specif
ied. (08004)
Type: Error
Severity: 40
Time: Tue Aug 25 22:50:05 2009
File: project/websubsystems/soapservicesimpl.cpp Line: 156
Properties: ThreadID-3264
Location:
saw.soap.makesession
saw.soap.sessionrequesthandler
saw.SOAP
saw.httpserver.request.soaprequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Authentication error. Details: Error connecting to the Oracle BI Server: The spe
cified ODBC DSN is referencing a subject area that no longer exists within the O
racle BI Repository.
Error connecting to the Oracle BI Server: The specified ODBC DSN is referencing
a subject area that no longer exists within the Oracle BI Repository.

Your Explanation about getting the error seems a little incomplete...
Whatever, RPD you are putting in the Catalog folder of OracleBIData Folder should also be your Default RPD if you are opting to see the Report in BI-Answers.
Whenever you go online the BIServer tracks the NQSConfig.ini file and checks for consistency. The same rpd must be there in the catalog folder with the ROOT attributes...
Also, check the DSN and Connection pool in the Physical Layer. If you are using Oracle Database check for the Service name entry in the TNSNAMES.ORA file..
Thanks,
Shib

Background layer thumbnail not appearing

When I open an image in photoshop (from camera raw), the image appears in the center screen, but in the "Layers" panel, the thumbnail in the background layer does not show the image. Instead, it shows an icon that appears to be the "brush tool" inside a square. I cannot change it to the opened image, very frustrating and, probably, very simple, but I cannot find the solution. Please help. Thank you, HONDO1717

Thanks for the screenshots, now I'm think I see what's going on.
So if I understand correctly, you open an raw image from Adobe Camera Raw and you expect to see a thumbnail in the Layers panel. Normally that's how it works for me.
The brush icon that you see in the Layers panel means that layer thumbnails are turned off. Here's how to turn them on in your Mac:
In the Layers Panel Control-click the blank space under the first layer and choose Small, Medium, or Large thumbnails from the context menu that appears.
You should then have a thumbnail of your opened file.
Gene

Images will not appear on Stage area of Adobe Flash Professional

I have Adobe Flash Professional CS5.
Yesterday I successfully created an animation.
Later the same day I tried to create another and the images will not appear on the stage.
I loaded in PNG files - which worked the first time - now they will not show up.
I can see their binding boxes on the stage, and move those but the images just do not show up.
When I hit ctrl + enter to preview, I can see the images in the preview movie - just not on the stage working area!
I tried restarting, shutting down, updating my PC, uninstalling programs, loading different file types (jpg), and resaving and reloading the PNG files. I even tried different types of Flash defaults. NOTHING WORKS.
I hope someone can tell me what is wrong this makes no sense!

Before you drag the image from the library to your stage, make sure you insert a blank keyframe (F6) on the layer you are working with, then drag to stage. This worked for me.

Presenter 8 is not appearing in the ribbon

I have just installed the trial of this product on a Win 7SP1 system with Office 2010 (64bit). These meet the system requirements specified here:
http://www.adobe.com/products/presenter/tech-specs.html
Presenter does not appear in the ribbon. I have run the installer twice now. There is no disabled COM add-in.
What have I done wrong please?

Hi Alpi,
Thanks for your assistance. I did download the 64 bit version I believe: "Presenter_8_1_x64_LS12"
I have uninstalled and re-installed but still the same problem. I assume I can add the add-in manually but am not sure which file.
The reason for trying this software is to see if I can use it instead of Captivate to produce some training that comprises a series of videos clips (one per slide) with a quiz and table of contents. This will be delivered via an LMS and provide a certificate on completion of the whole (or most) of the presentation. The problem with Captivate is that I am having problems with iPad delivery; there is no playback control for the videos.
TIA

In Facebook half of my photos do not appear but they are OK with Explorer

When i go into my profile on Facebook, many of my photos are listed but do not appear. I don't have this problem when I use MS Explorer
== URL of affected sites ==
http://www.facebook.com/profile.php?id=100000550098670&v=photos&ref=profile

It is possible that you accidentally clicked the 'Block Images' item in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar and click the "More Information" button.
This will open the Security tab of the ''Page Info'' window (also accessible via Tools > Page Info).
Go to the ''Media'' tab of that Page Info window.
Select the first image and scroll down though the list with the Down arrow.
If an image is grayed and there is a check-mark in the box ''Block Images from...'' then remove that mark to unblock the images from that domain.
See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

My voice mail messages are not appearing as they are left. Often no voicemails show up until 4 weeks after they have been left

I am having trouble with my voice mail on the iPhone. The voicemails are not appearing until 3 even 4 weeks after they are left by a caller. Last night 10 voice messages came through all at once, one left before Thanksgiving. Is this an iPhone issue or an issue with the carrier?

I'm having the same issue. It began three or four days ago. I'd notice that I'd miss a call but the person wouldn't leave a message.
Two days later, suddenly three or four new voicemails will pop up from the past couple of days. The time stamp on the messages is correct-- it will show that the caller left the vmail a day or two before.
Also, in what has to be a related problem, some of the voicemails appear to be corrupted and cannot be played.
I have a 4s and my software is up-to-date. I have made no material changes to my phone, other than automatic software updates to explain this.
It's enormously frustrating and as a job seeker, I can't afford to miss voicemails. Does anyone know if this is the phone or the carrier (AT&T)?
Any help and input will be enormously appreciated.

Firefox not showing multiple subject areas for OBIEE source

Creating a new data set using the Oracle BI EE source. The dropdown list of subject areas won't drop down in Firefox, so I can't select any subject area other than the first one. It works properly in IE.
Anybody else noticed this?
OBIEE 11.1.1.6.9 with Firefox 18.0.2 or 21.0.

You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/

Agents not working in the upgraded OBIEE 11G

Hi All,
Recently we hae upgraded our BI Suite(10.1.3.4.1) to 11G(11.1.1.5.0)
We are able to see all of our ibots(Agents) in the new 11G instance and I have added new recipients, set the schedule for the seedding cache.
But when I try to run the Agent (Start Immediately), Agent ending up with a warning Invalid subscribers skipped
Even we have configured the email setup(SMTP) in the enterprise manager and we are able to receive the mail attachments.
But our goal is to add the usernames in the recipients tab and set the seeding cache option for the specified users.
How can we achieve this in OBIEE 11G
Any help would be much apprecialted....
Thanks
Praveen Chandu.

Hello Everyone,
The write back feature is working fine. There was an issue privilege setting in rpd.
Now one field is getting editable while pressing Update button in the dashboard report and type new value and pressing Apply button, data is getting updated in to DB table.
To aviod the manual entry i want to enter a value from some kind of dropdown or any choice box. So could you please let me know how can i achieve this functionality.
Thanks in advance.
Regards
Niraj

Endeca integrator not able to connect with OBIEE 11g

Hi All,
I am trying to connect OBIEE RPD(Repository) using Endeca Integrator3.0.
All credential are correct, OBIEE 11g is also up.
It show Error:
java.net.ConnectException: Unable to connect to port 7001 on machine localhost
how to reslove it.
Please give me suggestion.
Thanks
Prashant

Thanks for reply.
Endeca Server is running(Up).
OBIEE Server is also Up.
OBIEE Hostname: (ip address) i have used.
But Still I am facing same issue.
Where i get stack-trace?
Thanks,
Prashant

Content presenter edit icon not appearing

I am relatively new in this area ....I have an ADF application where i have the UCM connection defined. I expanded the UCM folders in the connection pallette of Jdeveloper and dropped an image from a folder in UCM repository as Content presenter taskflow in my jsff page fragment. The page fragment has the page customizable, panel customizable etc for the customizations. A taskflow comprising that page fragment is dropped on to a jspx page. When i run the page, i could see the image rendered. But when i press control Shift C , i could just see 2 icons (Manage Web content and Refresh) and not Edit icon where i am expecting to select some different image from UCM at runtime?
May be, with site studio region def / templates, this could work. If i go with Site studio in content presenter, i need to create region def, template and data files extra for this requirement. I am expecting something similar like when you drag the content presenter taskflow from resource catalog onto Webcenter portal, it will let you select some image on single content item selection at runtime.
I just want to select some different image from ucm at runtime thru content presenter without site studio. Is this the expected behaviour or the problem could be because of any ucm security.I checked the security group of the content item as public and is in released status. rebuild Index collection.
Regards
Prabhu

The Edit icon only appears for HTML content or for a proper data file.
If you just drag and drop an image, the edit will not work and you will not be able to select another image.
If, however you want to select another image in the CP, you don't have to do this in contribution mode (ctrl shif c) but in edit mode (ctrl shift e) and press the edit icon on the content presenter. This will allow you to select another image from UCM.
You can find more info in my tutorial: http://www.yonaweb.be/webcenter_11g_ps3_tutorial_introduction_content_integration and the next part for the data files.
Edited by: Yannick Ongena on Aug 16, 2012 9:53 AM

Photoshop layer names not appearing in DVDSP

DVDSP 4.0.3, Photoshop 7.0, MacBook 2GHz, OS 10.4.10
Once I've brought my .psd file in to SP and added it to a layered menu, the layers appear, but their names do not, and I can't turn them off and on either. For example, in the inspector, under the 'General' tab of a layered menu I am unable to select which layer I want to show. The odd thing is that the correct number of layers appear- I made 9 layers in Photoshop, and 9 layers appear in the inspector, but under their name is just a '-' and I can't select the check-box under 'show.' Likewise when I create a button- can't select any individual layers. I've experienced this problem with three different psd files. Anybody seen this before?

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

PIX-FLIX Text sent to phone, but actual video message does not appear in messaging area online.

I received a text message saying I received a Flix message. However I must access it by going online to vzwpix.com. So I went online right after and the website said it was down for maintenance. So I checked back a few hours later. I logged in. Went to Send Picture and Video Message. Then went to the Messaging Tab. However there was no message.
A few things come to mind why I might not have received my message. Since the person who sent the message had sent it during the time when the website was down, the message never went through?!
Another thing I noticed. When in my Picture & Video Messaging I see the Folders "Drafts" and "Sent Messages" however when I put my cursor over the "?" next to Folders it mentions a "Received Messages" folder should be included. However under the actual Folders the "Received Messages" folder does not exist. So maybe the message I was sent never had a default folder to be sent to?!
My phone was notified I was sent a message. I followed the directions. No message appears where it should be. Please help!
On a side note. I tried going to the "Contact Us" link at the top right of the page to get help. However, everytime I click it, refresh, etc. I get sent to the page "http://www.verizonwireless.com/backbutton.html". This is obviously a broken link.
Frusterated Customer seeking help ... Thanks in advance for help on this issue.

Still no answer to the question. Is this bogus or what?! I get a message from my Daughter-in-Law asking if I got my Mothers' Day song my grandkids sent this morning. No, I get this Flix message at this website text. Here I am now, registering and changing passwords I've never had to this 'forum' with no help and now Flix message. I''ve ignored these messages that I have received before now because of the drama. This time I follow through because of Grandkids for this.
I'm so frustrated that I've wasted so much of my time for naught. What do I tell the grandbabies? How can we avoid this from happening in the future? Was their song too long to send as picture/video message directly to my phone?
Why are their no answers anywhere? You've got to be kidding me.
Sore customer!

Presentation Layer model not appearing in Subject Area (OBIEE 11g)

Similar Messages

Maybe you are looking for