Presentation not saving place in slides when I change layouts. Please help!
Hello,
So I have a main lobby layout, with a PowerPoint presentation, and at a certain place in the presentation I switch layouts to access information on a PDF. When I click back to my main lobby/PowerPoint the presentation reloads and starts from slide one.
Is there any way to have it save my place in the presentation?
Thank you kindly,
John
Hello,
This should not happen. Ideal behaviour is to retain the slide number before the layout switch. Please give us any specific details that may help us reproduce this as we are not able to reproduce this in-house.
Thanks
Sameer Puri
Similar Messages
-
Mac's Safari will not hide the top bar when in full screen please help
So in my Safari when I enter full screen to watch a video the top bar won´t disappear no matter how long I wait and this is one of the little details that just **** me off. Here's a picture of it: http://i.imgur.com/0rGaE.jpg
Please tell me how to fix it.
Thanks.What version of Safari and what version of iMac are you using? If you can give us you iMac Model Identifier from the About this Mac under the Apple Menu, More Info tab, that would be helpful.
Good luck. -
I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?
Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer. -
trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT -
Applet does not load on app server when Free Design Layout
Hi,
I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
As shown in the tuorial:
[http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
3. Then I a webpage I "embeded" the applet.
4. I run the web app and the applet gets loaded and everything is just fine.
But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
But!
When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<</u>
Thanks for all your replies.
Cheers.
Edited by: arijit_datta on May 15, 2008 4:07 PMSolved.
Here is the solution:
[http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
Cheers..
Edited by: arijit_datta on May 16, 2008 7:41 AM -
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?
If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation! -
Unloading point is not copied from PR -PO,when i change account assignment
Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal RaoHave a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>
-
the disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod. how do i sort this out?
- Verify the file and disk formats on your camcorder and on your friend computer whether they support what you want to do. Also, if you are using a specific application to do the task, you may need to verify an application whether it supports the file format (e.g. MPEG4, Apple Intermediate Codec).
- Verify the device cable type whether Mac OS X 10.4.x supports.
- Verify the device compatibility with Mac OS X 10.4.x.
- Check an available firmware or driver for the camcorder that has developed after Mac OS X 10.4.4.
- Try diagnosing and repairing local hard disk and camcorder's drive directory.
- Verify disks permissions issue.
- Verify whether the disk is TOO warm or cold to read.
- If every troubleshooting does not solve the issue, consider to reformat the camcorder drive.
You may try suggestions by Dale Weisshaar: http://discussions.apple.com/thread.jspa?messageID=1206250 -
When trying to download or sync podcasts, I get an error code "you do not have the privilege to make changes". Please help! I tried uninstalling iTunes and reinstalling, but that did not work. Also, I rebooted and that didn't work, either.
I tried to use an external hard drive from my windows computer that was formatted in NTFS Windows format. Mac Pro sees that hard drive as "read only". Itunes works on existing media on the hard drive to play music or movies, but when you try to purchase from itunes store and download you get the above message. You need to move your library to a library that is formatted in exFAT format (which can be used both by "windows" and mac computers.
-
my ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.
You cannot remove or change the old ID. This is Find My iPhone Activation Lock. You need to recover the credentials for the Apple ID originally used to activate the iPad.
Check your spam and junk folders. -
iPhone 5c has lost its color. Everything on screen is gray. I have already checked "grayscale". Button is not "on". I downloaded latest software about a week ago but today is when color changed. Any help?
Hi ..
Try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. -
I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device. -
I can not open my Safari. It quits unexpectedly. The issue only happens to a single user account. It does not happen to anyone else in my family. Please help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful. -
Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx
Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
removed Lightroom and all files I can find, etc and reloaded. Some tedious
result. Step 6 is too time consuming at the moment for me, too many things
on the go since I¹m about to go on holiday and on return I shall need
Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
this damned problem.
Reading around the web I¹m not the only one with this issue, to suggest a
new user a/c is a soft option without resolving the issue.
I hope an expert from Adobe can resolve this,
Regards, George (retired IT Manager and IT Systems Project Manager)
Maybe you are looking for
-
HELP! I had iPhoto on my mac, for some reason it was not responding or damaged. down loaded a new version but can't find my photos. any ideas please. I thought once on the mac always on the mac.
-
The demo video and help both state you can drag a tab out of the current window to the desktop to make a new window with that tab. Does not work on my Windows XP system. Work for anyone else?
-
When I edit in PTLens it creates a Tiff file and opens PTLens then after editing it reverts to Lightroom but when I try to edit the Tiff file in Lightroom it says " An unexpected end-of-file occurred" I am on windows XP Pro SP3
-
Error installing Netweaver 2004s on 64 bit system
Hi I ma installing Netweaver 2004s on a 64 Bit OS (Windows). I have installed Oracle 10.0.2.0 oracle. While running SAPINST i am getting error: "Oracle is not installed. Please install Oracle and resume". There was no error while installing Oracle an
-
How do I use automator to make a macro to switch to the finder? I have tried using automator to execute the script "switch to finder" but it runs without actually switching the active application. Using the launch application does not work because it