Presentation on Industrial Applications using NI products and Labview

Hi All,
Can anybody provide me with some of the presentation or related material for National Instruments and LabVIEW Applications.
I think we used to have this kind of presentations/material on NI's website but i guess they have removed the same.
I want to make a presentation for NI and LabVIEW based applications.
I have gone through the link http://www.ni.com/solutions/ where i think earlier they had some material for the same.
I hope NI Application Engineer's and other experienced guys would help me for this...!
Dinesh Kumar
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few seconds

Hello Dinesh,
>From your name, I am assuming you are based in India. If that's true,
send an e-mail to [email protected] and they should be able to help you.
Hope this helps.
Regards,
Abhishek
Dinesh Kumar wrote:
> Hi All,
>  
> Can anybody provide me with some of the presentation or related material for National Instruments and LabVIEW Applications.
> I think we used to have this kind of presentations/material on NI's website but i guess they have removed the same.
> I want to make a presentation for NI and LabVIEW based applications.
>  
> I have gone through the link <a href="http://www.ni.com/solutions/" target="_blank">http://www.ni.com/solutions/</a> where i think earlier they had some material for the same.
>  
> I hope NI Application Engineer's and other experienced guys would help me for this...!
>  
> Dinesh Kumar

Similar Messages

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Problem using Change production and SFC step status with Simultanious group

Hello,
We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
Please let me know how to handle this.
Regards,
Pushkar Patil

Hi Pushkar,
It seems to be a bug. I would suggest opening a ticket on this.
Regards,
Alex.

How to implement a dual booting PXI system using windows 7 and labview RT

Good Day
My name is Mariano Ocana from the University of Manitoba, and I want to implement a dual system using windows 7 and labview RT in a PXIe-1082 chassis with a PXIe-8102 embedded controlled (the chassis came with windows 7 installed). What are the steps to use both systems (windows and RT) in the same chassis?, in the NI help comes an example implementing a dual system using windows xp and RT, it is the same procedure?.
Thank you in advance for all your help.
Regards
M. Ocana

Greetings, Mariano.
The real issue you have to contend with is whether or not you have a LabVIEW RT license. If the 8102 controller was purchased Windows-Only, you likely do not have a license to run LabVIEW RT on the controller - you can purchase one, I think it's about $500, and at that point you can request a LabVIEW RT Configuration CD (that's not what it's called, but the sales guy will know what I'm talking about). The Config CD is a CD that will partition your controller correctly with both FAT32 and NTFS filesystems (in the appropriate way) to allow you to run Windows 7 and LabVIEW Real-Time on the controller correctly. Once done, you can then switch within the BIOS between LabVIEW Real-Time and Windows in order to dual-boot.
Either way, you likely need to contact NI sales to either purchase an RT license (if one was not received at the time of purchase) or to request a Configuration CD (it might also be called a dual-boot install CD or similar).
-Danny

Could I use two regular computer to achieve realtime communication using the Ethercat and Labview Real Time Module?

Could I use two regular computers (one acts master , another one acts as slave using the Ethercat Internet Card) to achieve realtime communication using the Ethercat and Labview Real Time Module? if it could, what hardware should I purchase from the NI ?
Thank you!

Hi Xiaolin,
NI doesn't offer Windows based Ethercat master or slave software. Only LabVIEW RT can run the Ethercat driver.
However, you could use a LabVIEW RT target as an Ethercat master and use the Ethercat Internet Card with a slave PC (note: I think this will work from the Beckhoff description of the card you are describing. The card should integrate like any other non-NI slave. However I haven't tested the setup and don't advise saying it will work until you have tried).
You can use any NI RT target with two ethernet ports as the Ethercat master. This could be a cRIO, PXI or RT Desktop.
Jesse Dennis
Design Engineer
Erdos Miller

Hide Label step icon using Testand API and LabVIEW

Hi,
can anyone tell me how it is possible to hide the icon of a label step using Testand API and LabVIEW?
In the Teststand Sequence Editor, on the Label Edit Tab there is a Checkbox called "Hide Icon". Is there something similar in the API?
Thanks
Solved!
Go to Solution.

Yes you can, you will have to set the IconName property of the step to "ni_blank.ico"

Data source for application using both pooled and non pooled connections

Hi guys.
I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
Help will be greatly appreciated.
Regards.
Steve.

Hi Steve -
It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
cheers
-steve-

I am a new using Adobe products, and I am creating an Animation using Edge Animation.....

Hi guys.
As I said, I am new working with Adobe products, like Dw, and now I am creating an animation using Edge Animation.
Actually, I am creating a carrousel with different pictures representing three different apps being displayed from different devices, moving them and creating a simulated
movement for each one, based on the functionality, that action should be activated by a button (i.e.) titled "Inventory", the action to execute is to move
the three related screens ( Desktop, Ipad and Iphone ) from the original position to the middle screen, but at the same time, and this is what I need to know,
If there is another set of screens for a different application, how to move those back to the original position, before moving
the selected one, "Inventory". I tried to use a duplicated transition and inverting, it works, but it doesn't stop waiting for a new action, and how to combine
that movement back with the selected app-transition?
I put two screenshots with the stage and the original position for all of them. I have not created the buttons yet. I imagine I should use some kind
of conditional statements to execute the action sending back those elements located in the middle of screen, because were selected before,
and then execute to animation to move the selected app.
I would appreciate your help on this matter.
Thanks.
Gustavo Hevia
original Position.
After the First animation for Inventory App.

No answers, Ok.
I will try to give you more information about I want to do.
I am a Filemaker Developer, and I started creating my webpage, and one of thing I would like to do is this
animation and put it on my website.
What I want is to simulate a carrousel of options to show the selected application using the three buttons,
Now, I put the three buttons and each one of them is moving the three corresponding applications, that's fine.
But the issue I have :
I am using Mouseover and Mouseout to show a different color and size of the buttons, and to execute the
corresponding animation.
For each event I created different labels : Inventory_hover ; Inventory_mouseover ; Inventory_Animation and
Inventory_Animation_Reverse and so on.
Testing that
After I selected one of them, and it ended moving the three pictures to the center of the screen, and then I
leave, the three screens moved to the original position, which is not a bad idea, but I want to control that
moving.
So, what I want as a summary is :
1) to control that back movement. I was trying to figure out how to add some code inside the Animation code, and
just before execute that animation, check if there is another application selected before, and then move that
set of pictures back to the original position, since I have only three applications pictures, and only one can move
at the time, the checking "If Statements" would be for two others conditions.
2) That should be done only when one of the buttons is clicked, and not when the mouse leaves the buttons like it
is happening now.
I attached a zip file with my EA files.
Thank you in advance, Any help would be really appreciated.

Which application uses that file and prevents emptying the Trash?

Hi,
This has been with the OS for quite some time. Every once in a while, when trying to empty the trash, I get the error message:
"The operation can’t be completed because the item 'filename.estension' is in use."
How useless is that? Now, if OS X told me which application is using it, I could close that one application, delete the file, and get back to work. Sometimes, I can guess the application as the one I actually last used to access that file. But every so often, it's the Finder's "quick look," but every once in a while, I just haven't the clue.
So, is there an OS function (even if a UNIX/terminal command) or a utility that can tell me the application that is still using the file in the Trash?
Thanks, Tristan

Hi,
OK, to clarify: yes I use Lion (OS X 10.7.4) and I'd rather not close all applications. With Lion, I can just as well log out (which will close them) and log back in (which will reopen them). But, you realize that this is using a bulldozer to swat a mosquito: somewhere in the bowels of the OS X/UNIX, there is a "file in use" message from some application/process, which has not been cancelled (either because the application/process is really holding the file open or because the application/process has failed to clear the "file in use" flag).
A similar "feature" of OS X is when it prevents you from ejecting a volume because "it is in use." In that case, the "What's keeping me?" utility (by HAMSoft Engineering) comes to rescue, unearths the relevant culprit and reports it to the user. Yes, OS X should be doing it all by itself, but the 3rd party utility is just fine.
So, isn't there a way to unearth this info?

Non-standard application use of iMovie and Pyro AV Link

I want to pipe my 12" PC screen into my 2' iMac screen. I must use a hardwire solution and cannot use VNC or remote control over the web. I can get into the details, but no need here.
So my question: can I use a VGA/DV converter to feed the screen signal from my laptop into the PYRO AV Link, then use iMovie to view the input in real time, without saving to disk? Will the resolution be OK for my needs. Anyone done anything remotely like this? I do not want to buy the hardware if I am not somewhat confiedent it will work.
TIA

It's both iMovie and the Pyro. The resolution is dictated by Standard Definition TV resolution.
There is no way to get HD TV resolution in from that kind of source (a computer monitor).
There are screen capture applications for both Windows and Mac OS X that captures video (and audio). Try Google.

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

How to build a measurement system using NI products and the system is outside PC

I would like to build a system that uses NI's following products:
1. Wave form generator
2. Switches
3. A/D board
My question is: How to build such a system such that
the system is outside PC? For example, the system is
like an ordinary instrument that can be connected to
PC through RS 485 port.
Thanks!

If you are planning on using SCXI, you have two options. You can still use the PXI-1000B chassis, and you will need to connect your DAQ board to the SCXI system with a cable.
You can also consider using a PXI-1010 or PXI-1011 chassis. We call them combo chassis because they come with some PXI slots and they have an SCXI chassis attached to them. In this chassis, you can connect your DAQ board in the PXI slot closest to the SCXI chassis, and the DAQ board will communicate with the SCXI chassis through the internal PXI backplane, so you will not need to connect them through a cable. The PXI-1010 chassis has 8 PXI slots and 4 SCXI slots, and the PXI-1011 chassis has 4 PXI slots and 8 SCXI slots.
The MXI-3 extender will let you control any PXI chas
sis from a desktop. Keep in mind that there are two interfaces: the PCI-PXI-8330, which uses a copper cable, and the PCI-PXI-8335, which uses a fiber optics cable. The advantage of the fiber optics cable is that it is less likely to have noise and the PXI chassis can be up to 200 meters away from the computer.
Now, given that your signals have a 150V amplitud, you will need a SCXI-1127 module instead of a PXI-250x.
Finally, we do not have an amplifier in PXI form that can read a 50 KHz - 300 KHz and peak voltage 5v, and amplify it to 120v. However you could check other PXI vendors for those boards. You can find some information of third party vendors by going to the NI Developer Zone and clicking on the Third Party Product Advisor link on the left.
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments

Email application using dreamweaver MX and ASP...Is this possible?

Hello
I would like to create a web application that would allow
users to create and send emails a bit like Outlook but a bespoke
version.
There are a few things that this email application should do
such as:
1) Allow you to enter name, address, email address and job
category for each contact.
2) filter email list based on that above criteria eg. list
all the contacts that have a job category of Manager. One contact
may have one or more job category so the list would need to remove
any duplicates.
3) The email should get sent to everyone on the filtered list
so it would need to be able to send to multiple email addresses
4) The user should be able to send attachments.
I hope this makes sense. It would be great if I could do all
this in Dreamweaver.
Any help would be much appreciated on how I could develop
such a application and also if there any tutorials that I could
follow which allow me to do something similar.
Thanks

Hopefully this will set you in the right direction.
1. Create a user table. You will need to do this mentally
before actually
creating the database. What will the table contain? After you
have this
spec'd out, you can create it. You should create your entire
database
before creating it in whatever software you'r eusing (mySQL,
Access, SQL)
2. Design your jobs table. This will contain all info you
need to store
about the job.
3. Create a form that uses lists to build your "email". This
should be a
form that says, select Name, Adress or job category. This
will feed into
your SQL statement(or DW recordset), which will bring up all
your contacts
where your Name field in your user table (or Address, or Job
Category or all
three). You can tweak this until you get it just how you like
it.
4. Lastly you should have a very simple form (you don't
mention what server
language you're using) that will build an email based upon
the contacts you
have selected and email them.
You will need to get the database up and structure setup
before I could help
you more with it. Do you feel comfortable doing that?
"aman16" <[email protected]> wrote in
message
news:[email protected]...
> Thank you for your reply. Its much appreciated.
>
> I have made website in Dreamweaver before using ASP and
databases. I dont
> usually hande code though and just use the built in
tools that Dreamweaver
> MX
> has as standard. I just need a step in the right
direction really thats
> why I
> would appreciate any tutorials that you may no of which
do something
> similar or
> maybe do a part of what I am trying to do. I could get
as far as making a
> database with contacts and all there details and then
making an ASP page
> to
> display that information and maybe filter it in some way
but I dont know
> how to
> then extract the email address from that filtered info
and then make a
> form to
> type the message and attach any attachments and then
email the form to all
> the
> email addresses from the filtered list.
>
> You mentioned that there are web based email
applications out there that I
> can
> customize to do a similar thing. Could you let me know
of any names of
> these
> programs so I can then read up about them? I would like
to customize it
> quite a
> bit though to try and make them as bespoke as possible.
>

TS1506 I have just got a Mac Book Pro after 30 years of using Msoft products and now find a (in my opinion) a piddling issue with attachments in Mail - Apple - just fix it.

After over forty years in IT I am actually a platform agnostic however I have come to expect some developmental maturity across all products, especially in generally ubiquitous apps such as email. I am using OS X 10.8.3 on a 2013 build Mac Book Pro and am very happy overall. Is Apple planning on fixing the various problems with Attachments in Mail or are they relying on third party fixes and workarounds?

My apologies if I have caused offence, not my intention. I was unable to view attachements but have since discovered an addon app which solves the problem very neatly. By way of explanation my frustration comes from Apple appearing to indulge in client lock in as do Microsoft - this practice was "invented" by IBM and only served to irritate clients and inspire excellent work arounds by third parties - much the same as I notice with Apple. I thought Apple would have outgrown this after the IIe vs BBC but I see this is not the case. I have recently upgraded to Mavericks and have no problems with Mail but am now unable to transfer material from Mac Pro to Ipod unless I use the icloud - something I do not want to do for a variety of reasons, not the least being able to transfer MY data without the use of an unsecured transition area. I am very happy with the quality of the Mac Pro but less than happy with the restrictive practices of Apple; I realise Microsoft have similar practises but they are not as completely disruptive to what are generally simple operations commonly required when using computers.
My thanks to all the others who reponded - this is my first foray into the world of forums and I will continue to learn the rules.

Presentation on Industrial Applications using NI products and Labview

Similar Messages

Maybe you are looking for