Presentation services and BI server stopped

Hi,
Presentation service and BI server stopped with the following error.
“The description for Event ID ( 21 ) in Source ( Oracle BI Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [47055] 30000 is too large for MAX_GLOBAL_CACHE_ENTRIES, and it is reset to default value, 10000..
Any suggestion on this..
Thanks

can you provide more information. where did you find this description,in nqserver.log?
Also check your saw0.log.
Regards,
Sandeep

Similar Messages

Not able to start the Presentation services and BI Server

Hi,
My prsentation services has gone down, after the changed the default rpd and oped another rpd which was password lock. De-Commented the AUTHENTICATION_TYPE = BYPASS_NQS and restarted the BI Server and stopped it again, then logged into the rpd without any password and then changed the password and close the BI Admin tool and started the BI Server.
But now the presentation server is not starting."Could not start the BI Presentation Services on the Local Computer. For more information, review system event log....."
The instanceconfig.xml has the right path "<CatalogPath>C:/OracleBIData/web/catalog/xxx</CatalogPath>
the catalog is the same as what is mentioned in the NSQConfig.ini.
Never this this kind of error before.
Can somebody please help.
Rgds,
Amit

Hi Saichand,
Sorry i had resolved it. Actually i had done some cryptotools for adding the Impersonator, and when i changed the RPD it gave me error bcos of that, i removed the entries from
credentialstore.xml and also from instanceconfig.xml and the Presentation Services where up.
I really appreciate your promptness in answering the question, do u get an alert in email or you keeping checking the site.
Thanks & Rgds
Amit

Urgent --2 BIEE presentation Services and One BI Server in Linux

Is it Possible to Have 2 BIEE presentation Services and One BI Server, so one BIEE Presentation Server access 1.rpd and another will access 2.rpd to create Report design.
Basically my requirement is at a time 2 developers need to create reports with 2 different. RPDs in the same environment with by 2 diff URLs.
This Situation is in Linux platform.
So in this Situation what NQSConfig.ini will contain?
And how many OracleBIData Folders will create and how many Instanceconfig.xml files create?
If possible please can you please share any documentation related to this?

Excellent discourse! I must say, this is a great example of what "forum" really means: a place where posters can point and counterpoint an idea in the arena of all Oracle "onlookers" where each can determine the best course of action for IN ('himself', 'herself') based on the evidence provided. Everyone benefits when a poster can document where IN ('he', 'she') derived IN ('his','her') opinion so others can test and verfiy.
In the vein of "Whose Line is it, Anyway?" ala Drew Carey: "Thousand points to Turribeach and Giorgio!"
(Seriously, though, user650397, you should award points to these two as valuable information was discusssed and whether you choose Giorgio's suggestion or Turribeach's, both ideas were "helpful" at the least, because without both sides, you would not have known that there are more than one option.)
P.S. I agree with what Turribeach said. We also chose the route he did.
P.P.S. To user650397: Change your username to something more mnemonic. I had to go back to the thread just to remember what number followed "user."

Unable to Sign In into presentation services and online RPD obiee11.1.1.3.0

Hi,
I am using OBIEE11g (11.1.1.3.0) on Windows 64bit server, suddenly i have problem i could not able to login my Dashboard and RPD (online mode) [i.e: i am able to login offline mode in RPD] but Weblogic console and EM and OPMN all services are up .
Please check the below error:in RPD
http://imageshare.web.id/images/ra9qhx8pm4liwsk1rexd.jpg
In EM:
http://imageshare.web.id/images/y06x8bu0huhoisyqy718.jpg
while testing DSN also error
http://imageshare.web.id/images/zgq47suhrjabe3ye2ck.jpg
Last few months ago i have faced the same issue ..then i resolved below method
Unable to Sign In into presentation services and RPD obiee 11
Issue :I had a trouble to login into RPD (online mode) the Presentation services lately.
It was working fine before and after changed console user sequrity things changed and was having issues to login lately after that.
It always gives me invalid username/Password was entered message when I tried to login no matter what ever username I tried.
I was able to login into Enterprise manger and Weblogic Admin console successfully with out any issues. All the processes are up and running with out any issues.
Tried rebooting successfully and still it wont let me login into Answers. So I tried if i could login into Admin tool and it wont let me login there as well.
So I created new Admin user in the Weblogin console and tried to login using the new user and still no luck. The new admin will let me login into the EM and WLC but not into Answers and rpd.
I tried deleting old references of the user directories in the catalog and still no luck.
It has something to do with the credential store. What ever user name I created its not mapping it to the Answers/rpd inspite of both the services are running
Solution:
======
1. Please follow instructions given in
How to fix “Unable to Sign in. An error occured during Authentication" error when a user logs in OBIEE 11g (Doc ID 1302924.1) step by step, for those steps you have done, please double check and make sure what you've done are correct.
2. You are still not able to logon because you have missed a few steps as the following:
8. Edit the NQSConfig.INI file to reset the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES to NO and restart the Oracle BI Servers.
9. Remove, set to none, or comment out the line (see UpgradeAndExit in the following example) added to the instanceconfig.xml file (that instructs Oracle BI Presentation Server to refresh GUIDs on restart).
10. <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
11. <ps:UpgradeAndExit>false</ps:UpgradeAndExit>
12. <ps:UpdateAccountGUIDs>none</ps:UpdateAccountGUIDs>
13. Restart the Presentation Server for the instanceconfig.xml file that was updated.
14. Make sure Oracle WebLogic Server and the system components are also running, if they are not running, restart them.
b) Relogin as the problematic user to verify if you still see the “Unable to Sign In” error
Step 2 : Delete user from rpd if present
a)Launch admin tool and open rpd in OFFLINE Mode
b)Click Manage > Identity > Users tab to verify if you see this user present
Note : Normally you will only see list of users when you open rpd in ONLINE mode. Unless the users were created manually in rpd, no users should be visible in OFFLINE mode
c)If the user is present, delete this user entry from rpd
d)save rpd and deploy this changed rpd using EM
e)restart OBI Server component
f)relogin as the problematic user to see if you still see “Unable to Sign In” error
Step 3 : Delete the cacheduserinfo file from webcatalog
If Step1 and Step2 does not work, then do the following
Note : In the example below, catalog name is SampleApp and the user who gets “invalid Login” error is Administrator user.
a)Take a backup of your webcatalog
b)Navigate to C:\OBIEE11G\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleApp\root\users\Administrator\_prefs
c)Delete the files name cacheduserinfo and cacheduserinfo.atr
d)Launch OBIEE 11.1.1.3 and test by logging in as the specific user.
the best one is 3rd one.
but the above all methods also not working
Kindly check and help me on that ...
Thanks
deva

Hi,
errors in \user_projects\domains\bifoundation_domain\servers\AdminServer\logs?
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671768> <BEA-000436> <Allocating 3 reader threads.>
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671770> <BEA-000446> <Native IO Enabled.>
####<Sep 5, 2011 5:24:32 PM SGT> <Info> <IIOP> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214672013> <BEA-002014> <IIOP subsystem enabled.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674424> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674990> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675109> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_ACmZIP/2hHMOMnTCnE4XU/CV4wQ=>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675232> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675666> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675832> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675880> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675883> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675884> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675887> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675891> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675894> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675895> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675897> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675898> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675899> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675902> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675903> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675904> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675906> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675908> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675909> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676507> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676523> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676732> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676733> <BEA-090082> <Security initializing using security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676930> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676932> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000365> <Server state changed to FAILED>
####<Sep 5, 2011 5:24:36 PM SGT> <Error> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676977> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676988> <BEA-000236> <Stopping execute threads.>
Thanks
Deva

What is the different between Sharepoint fast search service and Sql server fulltext search?

HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
James

They are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.

[Forum FAQ] How do I disable all subscriptions without disabling Reporting Services and SQL Server Agent?

Introduction
There is the scenario that users configured hundreds of subscriptions for reports. Now they want to disable all the subscriptions, but Reporting Services and SQL Server Agent service should be enable, so the subscriptions will not delivery reports to users
and users could run the reports and create jobs on the server.
Solution
To achieve this requirement, we need to list all subscriptions and their schedules by running query, then use loop statement to disable all the subscription schedules by Job name.
On the Start menu, point to All Programs, point to Microsoft SQL Server instance, and then click SQL Server Management Studio.
Type Server name and select Authentication, click Connect.
Click New Query in menu to open a new Query Editor window.
List all subscriptions and their schedules by running the following query:
Use ReportServer
go
SELECT   c.[Name] ReportName,
s.ScheduleID JobName,
ss.[Description] SubscriptionDescription,
ss.DeliveryExtension SubscriptionType,
c.[Path] ReportFolderPath,
row_number() over(order by s.ScheduleID) as rn
into
#Temp
FROM
ReportSchedule rs
INNER JOIN Schedule s ON rs.ScheduleID = s.ScheduleID
INNER JOIN Subscriptions ss ON rs.SubscriptionID = ss.SubscriptionID
INNER JOIN [Catalog] c ON rs.ReportID = c.ItemID AND ss.Report_OID = c.ItemID
select * from #temp
Use the loop statement to disable all the subscription schedules by Job name:
DECLARE
@count INT,
@maxCount INT
SET @COUNT=1
SELECT @maxCount=MAX(RN)
FROM
#temp
DECLARE
@job_name VARCHAR(MAX)
WHILE @COUNT <=@maxCount
BEGIN
SELECT @job_name=jobname FROM #temp WHERE RN=@COUNT
exec msdb..sp_update_job @job_name = @job_name,@enabled = 0
SET @COUNT=@COUNT+1   P
RINT @job_name
END
PRINT @COUNT
Reference
SQL Agent – Disable All Jobs
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Database engine services and sql server replication failed in installation

hi im trying to setup sql server on my laptop but it says the 'database engine services' and 'sql server replication' have failed due to some specified module being missing can anyone help me out?
log file:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2147467259
Start time:                    2015-03-17 10:47:47
End time:                      2015-03-17 11:08:11
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name:                  SHARI
Machine processor count:       2
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services
1033                 Express Edition      10.1.2531.0     No
SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication
1033                 Express Edition      10.1.2531.0     No
SQL Server 2012
Management Tools - Basic                 1033                 Express Edition
11.0.2100.60    No
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         c:\efa3a640a9b59ee651913f55719bf3b1\x86\setup\
Installation edition:          Express
Product Update Status:
None discovered.
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Manual
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                true
FEATURES:                      SQLENGINE, REPLICATION
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID:                    SHARIINSTANCE
INSTANCENAME:                  SHARIINSTANCE
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SHARIINSTANCE
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           SHARI\Shari Donald
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  true
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           true
Configuration file:            C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x80004005
Error description:             The specified module could not be found.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x80004005
Error description:             The specified module could not be found.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature:                       SQL Browser
Status:                        Passed
Feature:                       SQL Writer
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\SystemConfigurationCheck_Report.htm

Hello,
As per the log details shared, installing version is SQL server express. Please go to control panel - add and remove programs and uninstall the
SQL Server Database Engine Services Instance Features, and also Uninstall all SQL Services.
Reboot and start the start the installation with RUN as Administrator.
Thank You.
Regards, Pradyothana DP. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory

Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.

Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful.

SQL Server 2012 express istallation failing to install "Database Engine Service" and "SQL Server Replication"

I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.

Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2061893607
Start time:                    2013-12-23 14:42:45
End time:                      2013-12-23 15:07:51
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name:                  mymachine1
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          Database Engine Services
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          SQL Server Replication
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012
Management Tools - Basic                 1033                 Express Edition
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title:                         Service Pack 1
Knowledge Based Article:       KB 2674319
Version:                       11.1.3000.0
Architecture:                  x86
Language:                      1033
Update Source:                 MU
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           <empty>
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Manual
SQLSYSADMINACCOUNTS:           MH\gt038676t
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Passed
Feature:                       Client Tools Connectivity
Status:                        Passed
Feature:                       Client Tools SDK
Status:                        Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Passed
Feature:                       Management Tools - Basic
Status:                        Passed
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Browser
Status:                        Passed
Feature:                       SQL Writer
Status:                        Passed
Feature:                       SQL Client Connectivity
Status:                        Passed
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm

WRT160NL built in DHCP server and WEB server stop to work

Hello all!
My home network based on the WRT160NL with one wireline PC, two wireless PCs and wireless printer works with no problems - connections are at full speed, no drop outs, wireless and wireline QOS is perfect. But then quite regularly every two or three days suddenly the router internal DHCP servers stops to work - I see with the wireshark that my wireline PC sends the DHCP requests to the router but router does not reply to them. If at the same moment the other PC's are allready in use and got theirs IP before they can surf the internet uninterrupted. Only router reboot helps to solve this situation. After the reboot DHCP server immediately acknowledges DHCP request from the PC and assigns him his IP number.
Sometime this situation occurs when IP address is already assigned, I can surf the internet, routing works, I can ping the router but I can not access the router's built in web server. Neither via IE, neither via FF.
I do not use P2P programs, IP traffic over the router is very light - no internal traffic between PCs, no file transfers to the USB flash key and WAN internet connection is 1Mbs. I have upgraded to the latest firmware Ver.1.00.01.17. Nevertheless problem occurs quite regularly about every three days.
I try to reproduce the problem more frequently and there is the way how to do that - I start to watch IP TV on my wireline PC (usually I watch my IP TV via the STB connected directly to the DSL modem) so IP TV multicast now goes through the router. It is about 5 - 6 Mbs and about 500 pps of IP traffic. This IP TV stream very often causes internal web server and DHCP server to stop. So although I can watch IP TV and surf the web on my PC with no problems, if other PC's are powered up during this situation they will not get theirs IP addresses.
I see in other posts on this forum that similar behavior can be triggered also with the heavy read/write traffic to the attached USB flash key.
So my conclusion would be:
- are the problems above known to Linksys/Cisco, do they acknowledge them, do they work on them
- when we can expect new firmware release - can we expect new release for this model at all
Best regards
Message Edited by srus on 02-12-2010 04:05 AM
Message Edited by srus on 02-12-2010 04:14 AM

Ridcully thank you for your post, I did not execute the procedure you suggested. Prior to execute it I want to get more background on it? Why do you think that reconfiguring from the factory defaults would solve my problem? Are you 100% sure that this is the solution or are you just guessing?
Router offers backup and restore functionality where you can store current configuration into file on PC and latter restore it. Can I use this functionality in your procedure or should I reconfigure all router settings manually?

OBI Presentation Services and Firefox 10?

I just upgraded my browser to Firefox 10 (from 9.0.1 I think?) and am getting a "Your browser is not supported by Oracle BI Presentation Services". Version 9 worked flawlessly (to my knowledge).
Anyone else getting that? I have a workaround (Chrome and IE still work) but I really enjoyed using FF with OBIEE.

I bumped into this because my Firefox updated itself. The Modify Headers Addon works for me, but I think it will be a bit beyond our users. I'm also worried about IE 10 now.
This reminded me of a thread on prohibiting iPads, and perhaps someone with more familiarity with presentation services can run with this (from http://groups.google.com/group/obiee-enterprise-methodology/msg/4ca8f8c0d74f1f43?pli=1):
BI EE Presentation Services now supports the following 3 tags.
+1. PermittedUserAgentType - The name field associated with the browser. This typically maps to filemap key names.+
+2. minVersion - The minimum version supported. This needs to be a string as browsers do things like 3.0b1.+
+3. maxVersion - The maximum version supported. This needs to be a string as browsers do things like 3.0b1. This should typically not be specified.+
These are there as part of the xsd of instanceconfig.xml.

Changing sql server service and sql server agent service startup account in SQL Server hosting SharePoint DB

Hi
i have a sharepoint deployment with one SQL Server (running on VM) hosting the config DB and another SQL Server (Physical Host because VM was running out of space) to host the huge Content DBs. I need to schedule automatic backups of the Content DBs to a
network share. For that i need to run the SQL Server Service with an account having permissions to the share as suggested in https://support.microsoft.com/kb/207187?wa=wsignin1.0
I tried changing the logon as a service account to a domain
account which has permissions to the Network Share and is also in local Administrators group of SQL Server and has "public and sysadmin" roles in SQL Server but that caused an issue. the SharePoint Web Application started showing a White Screen so
I had to revert back to the default accounts i.e. NT Service\SQLSERVERAGENT and NT Service\MSSQLSERVER. I viewed the event logs . These are the types of error i got after changing the logon as a service account to a domain account
1) Information Rights Management (IRM): Retried too many times to initialize IRM client. Cannot retry more. Retried times is:0x5.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5148
Version
15
Level
2
Task
9
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T04:46:04.750899500Z
EventRecordID
176477
Correlation
[ ActivityID]
{8FACE59C-1E17-50D0-7135-25FDB824CDBE}
Execution
[ ProcessID]
6912
[ ThreadID]
8872
Channel
Application
Computer
Security
[ UserID]
S-1-5-21-876248814-3204482948-604612597-111753
EventData
hex0
0x5
2)
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5586
Version
15
Level
2
Task
3
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T07:01:35.843757700Z
EventRecordID
176490
Correlation
[ ActivityID]
{50B4E59C-5E3A-50D0-7135-22AD91909F02}
Execution
[ ProcessID]
6912
[ ThreadID]
5452
Channel
Application
Computer
Security
[ UserID]
S-1-5-17
EventData
int0
0
string1
The target principal name is incorrect. Cannot generate SSPI context.

Hi Aparna,
According to your description, you get the above two errors when scheduling backups of Content DB. Right?
Based on those two error messages, they are related to the service principal name(SPN) for SQL Server service. Please verify the if the SPN is registered successfully. You can view it in ADSI Edit or use command line. Please see:
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
When installing SQL Server, those two services below should be registered:
MSSQLSvc/servername:1433
MSSQLSvc/servername
Please check if those SPNs or duplicated SPNs exist. You can use command to reset SPN or remove duplicated SPN and add new one. See:
Setspn.
We have also met this issue when this SPN is registered under Administrator. Please try to register it under Computer. You can add it in ADSI Edit.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Moving the Reporting Services and Report Server DB into AlwaysON Availability Group

I have configured the new set of SQL 2012 AlwaysOn Availability Group and need to move the SSRS and it's Report Server DB into that Availability Group.
Can anyone give tell me the steps to do this move?
Can I just backup the ReportServer DB into the AG server then import that DB into the SSRS running on the new AlwasyOn AG SQL?

Hello,
Based on your description, it seems that you want to move the Report Server database to a different server. If so, both the reportserver and reportservertempdb databases must be moved or copied together. You can move the databases by using Detaching
and Attaching or Backup and Restore.
What's more, you should also backup the encryption keys for the report server database you want to move and then restore to the new server.
You can configure report server databases in Always On Availability Group to be part of a replica; however Reporting Services will not automatically use a different replica for the report server databases when a failover occurs
Reference:
Moving the Report Server Databases to Another Computer
Reporting Services with AlwaysOn Availability Groups (SQL Server)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Shared Services and Essbase Server Access Question

Hi,
It seems that we have to assign Essbase Server access at the individual username level and that groups don't work when it comes to Essbase Server Access. Is this correct or are we doing something wrong and groups do work with Essbase Server access? We are on 11.1.1.3 Essbase/Planning/Shared Services.
Thanks

You can provision Essbase Server Access via groups but it must be the very first thing provisioned and pushed to Essbase. Then after that, provision your groups with other accesses such as Planning, Reports etc....

Heterogeneous Services and SQL Server triggers

Has anyone had any issues arise when using HS and trying to insert into SQL Server?

Do you have any pending statements in dba 2pc pending?
Your init parameters seems good. you need to check with the network guys for the packages sent from Oracle is received by sql server and vice versa. Hope there is no block on redirect ports.
You can enable tracing and see if you get any valid points in this direction.
As you said about trigger, look for the privileges in sql server does the user you are connecting has all the privilege on the associated tables. Also the conditions on the trigger has to be satisfied for the execution.
Also you need to add some HS parameters for the recovery in case you may need.

Presentation services and BI server stopped

Similar Messages

Maybe you are looking for