Presentation strategy - viewing notes while projecting slides?

I'm giving a presentation with a projector in a couple of weeks. I'd like to project the slides on the screen, but be able to view the notes for each slide on my computer. How do I configure Keynote to do this?
Message was edited by: sw_i_t_t_e_rs

AS you have discovered, the Keynote Preferences Slideshow menu will enable you to "Present on secondary display" - i.e. show your slideshow to your audience via the projector. While in this menu, check any (or all) of the other display options that work for you. (I strongly recommend the first four square boxes).
Then, in the Presenter Display Preferences menu, be sure to check the box "Use alternate display to view presenter notes." This will put the presenter notes display onto your computer's monitor. I also recommend checking all of the options boxes - especially the "ready to advance indicator." This provides an excellent visual guide as to when Builds and Transitions have completed and the next "click" can be executed.
The Edit Presenter Layout options allows you to arrange the various elements in the display to suit your own tastes.
Good luck.

Similar Messages

How to view presenter notes while recording slide show?

Hi,
I am a new keynote user.
I was wondering if there is a way to view notes/presenter tools while recording the slideshow. Currently when I start recording the slideshow it jumps to the full-screen slideshow view and I am unable to see the notes.
Thanks.

I think you will need to connect a second display.

Presenter Display does not update current slide or run timer ...

Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!

Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio.

Archive Viewer not showing project variables in filter conditions

Hi !
This is a strange issue. We have a full archive database. The viewer displays all the process we have deployed. We can see the contents of the archive without problems. We have also defined like 15 project variables. If we take a look at the filter conditions combo box, we only see predefined conditions for filtering. The first option of this condition is empty. If we look at the html source of this jsp page thru the browser (look for the "updateAddFAT" javascript function), we see that there is indeed java code mentioning one of our project variables in the combo box, and it its the one with no label (or blank one). So, if we choose this blank condition and complete the right value in the value text box, then the filter returns all the instances that apply to that condition using the project variables.
The problem is: we don't get all the project variables in the filter combo box. This makes the archive viewer very useless, because business users need to search archived instances filtering by project/business variables.
Anyone experienced this? Anyone is seeing correctly the project/business variables in the condition combo of the archive viewer? if you do, please share the version and patch you are using.
Thank you !
Regards,
Matias.

What I verified somehow, that if I add let's say 3 or 4 variables, it keeps showing always the same. If I remove the one that is currently loading into the combo box, then the next one in the list is displayed, but I don't understand which filter or sort criteria is using. I went deeper in the code (jsp and jar files), but still cannot indentify the root cause, because the SQL query the jar is sending to the archive database seems to be ok (it appears in the log), at least it returns all project variables in the archive database (table VARIABLE), but somehow, some internal array or list is not filled correctly.
Let's wait and if not, I will create a service request.
Thanks.
Regards,
Matias.

Keynote for iOS: Hyperlinked text, viewing notes with slides, snagging images from Safari?

Hey all! Does anyone here know if there's a way to do the following in Keynote for iOS?
Add hyperlinked text
View notes long with slides
Snag and display images from Safari to put into Keynote
And if so, how?

HI,
I have created a project similar to yours and I can't see all the issues mentioned.
But, with the links which you sent, issues are present.
So, can you send me the CPTX project so that I can verify.
Regards,
Salini

I am facing to open slide presentation, appear a pop up saying my resoluition is not correct. I had tried all resolution but I keep not abble to view my photos in slide presentaion. What Could be this problem?

I am facing to open slide presentation, appear a pop up saying my resoluition is not correct. I had tried all resolution but I keep not abble to view my photos in slide presentaion. What Could be this problem? This started after I update the Iphoto. I have a Mac Mini 2010, and have the latest IOS and Iphoto software.

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

Edit a presentation while projecting

How can I edit a presentation while I'm projecting without letting the audience know what I'm doing, I mean I want to project something else but what I'm doing

First you need to make sure you are operating in Extended Desktop mode, not Mirroring mode. If you have the Displays icon in your menu bar, then you can turn off Mirroring from there. You can't use Mirror mode because it always shows the same content you both screens, so there would be no way to hide your actions from the audience. Extended Desktop means your Mac's screen is different from the external screen.
Once you are in Extended Desktop mode, use the feature in your presentation program that allows splitting the presentation across both monitors. I don't do those very much so I forget exactly what the options are called, but I know for a fact that both Keynote and PowerPoint have presentation options that do that, so your screen can show you both your slides and your notes while the audience only sees your slides.
What I am not sure about is whether you can actually edit as you present. While I know you can split the presentation so that you can see things your audience cannot see, this is only when the slides are being presented as a slide show. In order for you to edit, you must get out of slide show mode, back to normal windows and palettes. This will cause the slide show to stop on the big audience screen too, so they'll also see normal windows and other apps you may be running.
Or do you really mean you want to work in another application while you're presenting? That would be easier because you may be able to leave your presentation software in slide show mode on the big screen while you work on your screen. Again, this requires that you have Mirroring turned off.

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

View not copied or enhanced with wizard Error while creating Event Handler method in Z Component

Hello Friends,
In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.

Hi,
Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters. I dont have have the system right now. Please check any existing event import export parameters.
Check out do handle event method in the same class.
Redefine that method. Call that event method in this handle method. See existing code for reference.
Attach that event to the button on click event in .htm page.
Regards,
Bhushan

Rel. strategy is not triggered while creation of PR with cost centr

Hi Gurus,
While creation of PR release strategy is not getting triggered with cost centre BCWSV870. But release strategy of PR triggered for cost centre BCWSV852 (In PR changed only cost centre as BCWSV852 instead of BCWSV870). Both cost centres are similar and the both cost centres are exist in characteristics value in CL20N for the same release strategy.
My question is why for one cost centre triggers release strategy triggers and for other cost centre release strategy is not triggered. Can you please tell how come this and rewarded for answer this.
With regards,
C. Sundar Rajan

Hi,
In regard to problematic PR with cost center BCWSV870, was your PR maintained with only one line item? or multiple line items?. In additions, when defining cost center as part of the release strategy structure, did you enter all cost centers with leading zeros? Tak a further look into OSS Note 365604 for your further investigation.
Cheers,
HT

In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

In iPhoto slide show I want to add notes to each slide. Following the directions, I press VIEW but I don't see "Show Notes". How do I do it?

hello louise, the firefox button will only be displayed in case the menu bar is hidden (''view > toolbars''), but you can access the options through ''tools > options'' as well in order to set a custom homepage...
[[How to set the home page]]

Design view not working after importing project from Flex Builder

After importing a project from Flex Builder to Flash Builder I am no longer able to see anything in the design view. I am using the flex 4.5 sdk.
Any idea how I can get this design view working? I heard it could have something to do with the metadata directory but am slightly lost here?...
Adam

Could you please provide more information as to what exactly are you importing. Also does Design View not lauch at all or does it give errors. Would it be possible for you to share the logs.
Meanwhile you can try cleaning the workspace and importing again to see if that solves the issue.

Doing keynote presentation. How do I switch screens so the audience does not see my notes and next slide?

Doing keynote presentation. How do I switch screens so the audience does not see my notes and next slide?

Go to Keynote>Help>Show your Presentation>Use Presenter notes.
Also if you are using separate screens see Present on seperate displays

Task Notes in Project Views in PWA

Hi,
is there any way to show all Task Notes in Project Views in PWA?
Thanks,
Peter

Hi,
I'm aware of this. My questions was to get the full Task Notes. Multiple Lines.
How to achieve this?
Thanks,
Peter
Hi Peter,
Task Note data is stored as an Image Data Type in the SQL database. As a work around, You may create a report using the below article:
http://blogs.msdn.com/b/chrisfie/archive/2008/06/04/how-to-display-microsoft-project-task-s-notes-field-in-a-report.aspx
Hope that helps.
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

So far so good. But then, how do you return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in mi iMac.

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

Presentation strategy - viewing notes while projecting slides?

Similar Messages

Maybe you are looking for