Presenter 10 and Pathlore LMS
What settings are required for a published SWF file from Presenter 10 to play in Pathlore LMS? When the SWF file is dowloaded and played locally, it plays fine in IE8, but the same file when placed on Pathlore, does not load and leaves the user with a white, blank screen. Help!!!
I was hoping we would find someone in the Adobe Community that could help us resolve the issue, since I don't have much faith in the SumTotal Tech Support. They've been working on this issue for more than a week and I've heard there are multiple complaints regarding this issue. I have seen posts online that people have been successful playing a published Adobe Presenter SWF on Pathlore. Just need one of those folks to clue us in!
Similar Messages
-
We use both Adobe Captivate 4 and Presenter 5 with our LMS - Taleo. We only have intermittent problems with participants launching the captivate swf files from the standard Captivate HTM page. We can usually solve the issues on an individual basis. With Presenter, however, we are having significant issues with the content not loading. We use the SCORM.HTM file produced by presenter to launch the content (and we upload all of the files in the "package" created by presenter). Many (but not all) participants get a new browser window with nothing but a white screen and the word done in the lower corner. Can anyone tell me what is different about how these two HTM pages "load" content and why one will load the SWF file and the other will not? Is there some scripting missing?
This was a problem previosly posted with no solution and I am having the exact same solution now. The problem "follows" the employee no matter what computer he is on. I have had him test the assignment on 4 different computers and yet he has the same issue consistantly. We have updated flash, adobe reader, cleared cache restore IE to defaults, and whatever else we can and still no solutions.
Does ANYONE have any suggestions?
Thanks!1) did not resume on the last viewed page:
Is 'always send resume data' (or something like that) checked in the Preferences for the project?
Technically, a lesson should set the 'cmi.exit' value to 'suspend' in order for an LMS to send back the 'lesson location'. Captivate 4 and previous did not do that, not sure if CP5 does. If a lesson does not set cmi.exit to suspend then, technically, the LMS should not return lesson location. Some LMS products enforce that, some do not. In our LMS, there's an option to 'always send resume data' and ignore the cmi.exit value for exactly that deficency in some authoring tools.
2) did not report project progress:
That's a bit more loose - what do you expect to be reported as 'progress'. 'cmi.progress_measure' support is not always supported by an LMS and I doubt any version of CP reports that. However, CP will report a quiz percentage...and every LMS should support that. To see a quiz score percentage, you must have 'scored interactions' somewhere in the lesson for CP to evaluate responses and determine a score.
3) no score;
Same as above, regarding score/percentage.
Just post to this forum or, better, then Captivate forum for future inquiries. Lots more folks to respond in these forums than just me alone!
Erik -
Cannot initiate communication with Pathlore LMS
We have a Pathlore Learning Management System that has an
on-line course based on Authorware. Upon startup of the course, a
communication link is established between the Authorware material
and the Pathlore LMS. However, for some of our sites (in Latin
America) the initialization of communication fails with the
following error:
Unable to eVal expression:
Post URL ("
http://...address...psciis.dll",PWInternalAICCPData,30)
Authorware error: -2147216532
At this point, communication with the Pathlore LMS fails and
no successful course completion can be recorded. Can anyone suggest
a possible fix either in our environment or the course material?
Regards,
Domenick LapollaA WAG would be that the separator is different, likely a
semi-colon
instead of a comma - or something like that. I'd guess the
eval
statement is doing something to the path, or the separator
for the
argument is unrecognized.
Can you change the Regional Options so commas are specified
as the
default separator? Like perhaps by changing the Location or
'Standards
and Formats' to English/United States?
If that fixes the problem, you found the issue.
Unfortunately, there's
likely no way to change that in the Authorware code..?
Erik
dlapolla wrote:
> However, for some of
> our sites (in Latin America) the initialization of
communication fails with the
> following error:
>
> Unable to eVal expression:
> Post URL ("
http://...address...psciis.dll",PWInternalAICCPData,30)
> Authorware error: -2147216532
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
raise form_trigger_failure;
else
execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi. -
Download and upload ABAP database table to presentation server and R/3
Hi experts,
I want to download ABAP database table (Ztable) to presentation server and again want to upload this to another R/3 server but i dont want to use any transport request. is there any possible sollution for this.
Thanks in advanceHi,
Look at this code hope this will help you to solve your problem
REPORT y_test_559.
Program for
1. Downloading Data of any DB table to a tab delimited ASCII file
2. Checking if a tab delimited ASCII file has the structure of a
DB table and showing its contents
3. Uploading a tab delimited ASCII file to a DB table with the same
structure
4. Showing the data of any DB table
======================================================================
======================================================================
DATA DECLARATIONS
======================================================================
TYPES : data_object TYPE REF TO data.
DATA : itab TYPE REF TO data .
TYPE-POOLS : slis .
DATA : it_fieldcat TYPE STANDARD TABLE OF slis_fieldcat_alv
WITH HEADER LINE .
DATA : it_fieldcatalog TYPE lvc_t_fcat .
DATA : wa_fieldcatalog TYPE lvc_s_fcat .
DATA : i_structure_name LIKE dd02l-tabname .
DATA : i_callback_program LIKE sy-repid .
DATA : dyn_line TYPE data_object .
FIELD-SYMBOLS : <fs_itab> TYPE STANDARD TABLE .
DATA : table_name_is_valid TYPE c .
DATA : dynamic_it_instantiated TYPE c .
CONSTANTS buttonselected TYPE c VALUE 'X' .
======================================================================
SELECTION SCREEN DEFAULT
======================================================================
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_tabl.
PARAMETERS : tabl_nam LIKE rsrd1-tbma_val
MATCHCODE OBJECT dd_dbtb_16 OBLIGATORY .
"Search for Database Tables is dd_dbtb_16
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_file.
PARAMETERS : file_nam LIKE rlgrap-filename .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_down.
PARAMETERS : p_downld RADIOBUTTON GROUP grp1
USER-COMMAND m_ucomm .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_chkf.
PARAMETERS : p_chkfil RADIOBUTTON GROUP grp1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_upld.
PARAMETERS : p_upload RADIOBUTTON GROUP grp1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) t_show.
PARAMETERS : p_show_t RADIOBUTTON GROUP grp1 ."show table data
SELECTION-SCREEN END OF LINE.
======================================================================
AT SELECTION SCREEN OUTPUT
======================================================================
AT SELECTION-SCREEN OUTPUT .
PERFORM check_filename .
======================================================================
AT SELECTION SCREEN ON VALUE REQUEST FOR FILENAME
======================================================================
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file_nam .
PERFORM f4_for_filename .
======================================================================
Initialization .
======================================================================
INITIALIZATION .
t_tabl = 'Table Name' .
t_file = 'File Name' .
t_down = 'Download Table' .
t_chkf = 'Check File to Upload' .
t_upld = 'Upload File' .
t_show = 'Show Table Contents' .
======================================================================
START OF SELECTION
======================================================================
START-OF-SELECTION .
PERFORM check_table_name_is_valid .
======================================================================
END OF SELECTION
======================================================================
END-OF-SELECTION .
IF table_name_is_valid EQ ' ' .
MESSAGE i398(00) WITH 'INVALID TABLE NAME' .
ELSE .
PERFORM instantiate_dynamic_internal_t .
CHECK dynamic_it_instantiated = 'X' .
CASE buttonselected .
WHEN p_downld .
PERFORM select_and_download .
WHEN p_chkfil .
PERFORM check_file_to_upload .
WHEN p_upload .
PERFORM upload_from_file .
WHEN p_show_t .
PERFORM show_contents .
ENDCASE .
ENDIF .
*& Form CHECK_TABLE_NAME_IS_VALID
text
--> p1 text
<-- p2 text
FORM check_table_name_is_valid.
DATA l_count TYPE i .
TABLES dd02l .
CLEAR table_name_is_valid .
SELECT COUNT(*) INTO l_count FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'TABL'
AND obj_name = tabl_nam .
IF l_count EQ 1 .
CLEAR dd02l .
SELECT SINGLE * FROM dd02l WHERE tabname = tabl_nam .
IF sy-subrc EQ 0.
IF dd02l-tabclass = 'TRANSP' .
table_name_is_valid = 'X' .
ENDIF .
ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
*& Form SELECT_AND_DOWNLOAD
text
--> p1 text
<-- p2 text
FORM select_and_download.
CLEAR : <fs_itab> .
SELECT * FROM (tabl_nam)
INTO CORRESPONDING FIELDS OF TABLE <fs_itab> .
PERFORM check_filename.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file_nam
filetype = 'DAT'
TABLES
data_tab = <fs_itab>
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc EQ 0.
MESSAGE i398(00) WITH 'Table' tabl_nam
'successfully downloaded to '
file_nam .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
*& Form UPLOAD_FROM_FILE
text
--> p1 text
<-- p2 text
FORM upload_from_file.
DATA : ans TYPE c .
DATA : lines_of_itab TYPE i .
DATA : l_subrc TYPE i .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
textline1 = 'Are you sure you wish to upload'
textline2 = 'data from ASCII File to DB table '
titel = 'Confirmation of Data Upload'
IMPORTING
answer = ans.
IF ans = 'J' .
PERFORM check_filename.
CLEAR l_subrc .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = file_nam
filetype = 'DAT'
TABLES
data_tab = <fs_itab>
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
l_subrc = l_subrc + sy-subrc .
IF sy-subrc EQ 0.
DESCRIBE TABLE <fs_itab> LINES lines_of_itab .
IF lines_of_itab GT 0 .
DELETE (tabl_nam) FROM TABLE <fs_itab> .
COMMIT WORK .
INSERT (tabl_nam) FROM TABLE <fs_itab> .
l_subrc = l_subrc + sy-subrc .
ENDIF .
ENDIF.
IF l_subrc EQ 0 .
MESSAGE i398(00) WITH lines_of_itab
'Record(s) inserted in table'
tabl_nam .
ELSE .
MESSAGE i398(00) WITH
'Errors occurred No Records inserted in table'
tabl_nam .
ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
*& Form F4_FOR_FILENAME
text
--> p1 text
<-- p2 text
FORM f4_for_filename.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = 'C:\'
mask = ',.,..'
mode = '0'
IMPORTING
filename = file_nam
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
*& Form CHECK_FILENAME
text
--> p1 text
<-- p2 text
FORM check_filename.
IF file_nam IS INITIAL
AND NOT ( tabl_nam IS INITIAL )
AND p_show_t NE buttonselected.
CONCATENATE 'C:\' tabl_nam '.TXT' INTO file_nam.
ENDIF .
ENDFORM. " CHECK_FILENAME
*& Form INSTANTIATE_DYNAMIC_INTERNAL_T
text
--> p1 text
<-- p2 text
FORM instantiate_dynamic_internal_t.
CLEAR dynamic_it_instantiated .
-----> Step 1 - Finding Field Names and ALV GRID Fieldcatalog
i_structure_name = tabl_nam .
CLEAR it_fieldcat[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = i_structure_name
CHANGING
ct_fieldcat = it_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
-----> Step 2 - Creating Field Catalog of the Object
cl_alv_table_create
LOOP AT it_fieldcat .
CLEAR wa_fieldcatalog .
MOVE-CORRESPONDING it_fieldcat TO wa_fieldcatalog .
wa_fieldcatalog-ref_field = it_fieldcat-fieldname .
wa_fieldcatalog-ref_table = tabl_nam .
APPEND wa_fieldcatalog TO it_fieldcatalog .
ENDLOOP .
-----> Step 3 - Creating Internal Table Dynamicaly
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcatalog
IMPORTING
ep_table = itab.
ASSIGN itab->* TO <fs_itab> .
dynamic_it_instantiated = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
*& Form SHOW_CONTENTS
text
--> p1 text
<-- p2 text
FORM show_contents.
CLEAR : <fs_itab> .
SELECT * FROM (tabl_nam)
INTO CORRESPONDING FIELDS OF TABLE <fs_itab> .
i_callback_program = sy-repid .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_callback_program
it_fieldcat = it_fieldcat[]
TABLES
t_outtab = <fs_itab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
*& Form CHECK_FILE_TO_UPLOAD
text
--> p1 text
<-- p2 text
FORM check_file_to_upload.
PERFORM check_filename.
CLEAR l_subrc .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = file_nam
filetype = 'DAT'
TABLES
data_tab = <fs_itab>
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
l_subrc = l_subrc + SY-SUBRC .
IF sy-subrc EQ 0.
i_callback_program = sy-repid .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_callback_program
it_fieldcat = it_fieldcat[]
TABLES
t_outtab = <fs_itab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Thanks,
Pramod -
Unable to Sign In into presentation services and online RPD obiee11.1.1.3.0
Hi,
I am using OBIEE11g (11.1.1.3.0) on Windows 64bit server, suddenly i have problem i could not able to login my Dashboard and RPD (online mode) [i.e: i am able to login offline mode in RPD] but Weblogic console and EM and OPMN all services are up .
Please check the below error:in RPD
http://imageshare.web.id/images/ra9qhx8pm4liwsk1rexd.jpg
In EM:
http://imageshare.web.id/images/y06x8bu0huhoisyqy718.jpg
while testing DSN also error
http://imageshare.web.id/images/zgq47suhrjabe3ye2ck.jpg
Last few months ago i have faced the same issue ..then i resolved below method
Unable to Sign In into presentation services and RPD obiee 11
Issue :I had a trouble to login into RPD (online mode) the Presentation services lately.
It was working fine before and after changed console user sequrity things changed and was having issues to login lately after that.
It always gives me invalid username/Password was entered message when I tried to login no matter what ever username I tried.
I was able to login into Enterprise manger and Weblogic Admin console successfully with out any issues. All the processes are up and running with out any issues.
Tried rebooting successfully and still it wont let me login into Answers. So I tried if i could login into Admin tool and it wont let me login there as well.
So I created new Admin user in the Weblogin console and tried to login using the new user and still no luck. The new admin will let me login into the EM and WLC but not into Answers and rpd.
I tried deleting old references of the user directories in the catalog and still no luck.
It has something to do with the credential store. What ever user name I created its not mapping it to the Answers/rpd inspite of both the services are running
Solution:
======
1. Please follow instructions given in
How to fix “Unable to Sign in. An error occured during Authentication" error when a user logs in OBIEE 11g (Doc ID 1302924.1) step by step, for those steps you have done, please double check and make sure what you've done are correct.
2. You are still not able to logon because you have missed a few steps as the following:
8. Edit the NQSConfig.INI file to reset the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES to NO and restart the Oracle BI Servers.
9. Remove, set to none, or comment out the line (see UpgradeAndExit in the following example) added to the instanceconfig.xml file (that instructs Oracle BI Presentation Server to refresh GUIDs on restart).
10. <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
11. <ps:UpgradeAndExit>false</ps:UpgradeAndExit>
12. <ps:UpdateAccountGUIDs>none</ps:UpdateAccountGUIDs>
13. Restart the Presentation Server for the instanceconfig.xml file that was updated.
14. Make sure Oracle WebLogic Server and the system components are also running, if they are not running, restart them.
b) Relogin as the problematic user to verify if you still see the “Unable to Sign In” error
Step 2 : Delete user from rpd if present
a)Launch admin tool and open rpd in OFFLINE Mode
b)Click Manage > Identity > Users tab to verify if you see this user present
Note : Normally you will only see list of users when you open rpd in ONLINE mode. Unless the users were created manually in rpd, no users should be visible in OFFLINE mode
c)If the user is present, delete this user entry from rpd
d)save rpd and deploy this changed rpd using EM
e)restart OBI Server component
f)relogin as the problematic user to see if you still see “Unable to Sign In” error
Step 3 : Delete the cacheduserinfo file from webcatalog
If Step1 and Step2 does not work, then do the following
Note : In the example below, catalog name is SampleApp and the user who gets “invalid Login” error is Administrator user.
a)Take a backup of your webcatalog
b)Navigate to C:\OBIEE11G\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleApp\root\users\Administrator\_prefs
c)Delete the files name cacheduserinfo and cacheduserinfo.atr
d)Launch OBIEE 11.1.1.3 and test by logging in as the specific user.
the best one is 3rd one.
but the above all methods also not working
Kindly check and help me on that ...
Thanks
devaHi,
errors in \user_projects\domains\bifoundation_domain\servers\AdminServer\logs?
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671768> <BEA-000436> <Allocating 3 reader threads.>
####<Sep 5, 2011 5:24:31 PM SGT> <Info> <Socket> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214671770> <BEA-000446> <Native IO Enabled.>
####<Sep 5, 2011 5:24:32 PM SGT> <Info> <IIOP> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214672013> <BEA-002014> <IIOP subsystem enabled.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674424> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Sep 5, 2011 5:24:34 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214674990> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675109> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_ACmZIP/2hHMOMnTCnE4XU/CV4wQ=>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675232> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675666> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675832> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675876> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675880> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675881> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675882> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675883> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675884> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675887> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675891> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675893> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675894> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675895> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675896> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675897> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675898> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675899> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675900> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675902> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675903> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675904> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675906> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675908> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<Sep 5, 2011 5:24:35 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214675909> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676507> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676523> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676732> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676733> <BEA-090082> <Security initializing using security realm myrealm.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <Security> <W01BGPCBIAPP1A> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315214676930> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Sep 5, 2011 5:24:36 PM SGT> <Critical> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676932> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000365> <Server state changed to FAILED>
####<Sep 5, 2011 5:24:36 PM SGT> <Error> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676974> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 5, 2011 5:24:36 PM SGT> <Notice> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676977> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 5, 2011 5:24:36 PM SGT> <Info> <WebLogicServer> <W01BGPCBIAPP1A> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1315214676988> <BEA-000236> <Stopping execute threads.>
Thanks
Deva -
Adobe Presenter 9 and PowerPoint 2013 - Missing Import Audio from PowerPoint button
I am only able to intermitantly use the Import button in Adobe Presenter 9 to Import Audio from PowerPoint. Why would I be able to do it on some presentations but not all? I thought it was an audio conversion issue but even when I convert the audio (when prompted by PowerPoint) it doesn't always allow me to import it.
I have found a solution if the original PowerPoint was a ppt file, follow these steps:
File > Save As a pptx file
Close PowerPoint (this helps with not corrupting the file)
Re-open the pptx file
File > Convert
Save with a new file name (this helps with not corrupting the file)
You should now have the Import from Presentation button if you go to the Presenter tab and click the Import button
I have not found a solution for pptx files yet. -
Adobe Presenter 8 and 508 Compliance
So I am in the middle of work for the US government. The output needs to be 508 compliant to meet Federal regulations. I have been building projects in Presenter 7 and using workarounds to achieve 508 compliance (e.g. printed script/handout in PDF). I have been informed that from here on out, no workarounds will be accepted -the presentation MUST be 508 compliant in the manner that they test. With that in mind, has Presenter 8 improved the accessibility of its output files compared to Presenter 7? JAWS compatibiilty, in particular, is what I need to know. The folks doing my 508 testing use JAWS and it always raises flags with Presenter output.
Before I drop the money to get the latest version of Presenter, I am wondering if things have improved or if I should be looking at another solution?Hi Mukul,
Thanks for the prompt reply!
My compliancy checker sent me the following notes (unfortunately, not as specific as I would like):
html version:
Videos need running timer bar.
Slides just stop; no indication that you need to select "next slide" in the menu.
Not all slides are read by JAWS; rather, it reads around the slide like it isn't there – check coding.
All charts and graphics need alt-tags.
and for the PDF version:
508 Compliancy &JAWS:
JAWS needs to be able to see a flash file, whether it is in a webpage , within a .pdf, or self contained. The flash movie needs to be “described” Within Adobe Flash Professional there is an option and the ability to access the “Accessibility Panel.” But this Digging Deeper Demo.PDF was developed within Adobe Presenter, and I have yet to create a project with this tool, so I am unsure there is the same “Accessibility Panel.” If there is not, I would imagine there is something similar to ensure the flash portion of the .PDF is seen by JAWS or any screen reader. -
In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this. -
How to split presentation level and business level using two ATG instances
Hello All!
We are investigating possibility of splitting ATG presentation (web store with jsp pages and other presentation components) and business (ATG components such as Pricing, Catalog, etc.) levels. The first idea that we have is simply start two instances of ATG. One instance will serve client requests (presentation level) and communicates with another ATG instance (business level) where all ATG components are situated.
The main problem is a Nucleus container which is used for accessing all ATG components. And we don't know right solution how to point to a Nucleus container that is situated on a remote ATG instance. Right now we have two ideas how to establish communication between two ATG instances:
- try to replace local Nucleus container by remote one using RMI;
- do not replace Nucleus container by implementing some custom filter that can redirect all servlet requests to another ATG instance. In that case we will have two Nucleus containers.
What do you think about all this? Do you have any other solutions how to solve the task? Maybe we lost something? Can we deploy a cluster of ATG instances that will communicate between each other?
Thanks in advance.
Andrey.
Edited by: 945758 on Jul 11, 2012 7:00 AMYes ATG system can have multiple nodes grouped in one or more clusters managed by load balencer
If the services you are talking about are inherently ATG services like login, add to cart, checkout then its better to implement it with ATG.
ATG provides and support both REST and SOAP based Webservice and allows you to expose any ATG component as service thus making it available outside ATG space.
To be able to manage load better you can split your servers to page serving servers and services oriented servers and place them into multiple clusters.
Though I haven't seen anyone using this kind of topology so not sure whether it's there is any challenge in setting up this topology. -
ITunes u on site hosting and any LMS tie in for authentication
We were not lucky enough to get grandfathered into having Apple host content for our institution with regard to iTunes U. Just wanted to see how others have configured the onsite hosting of their content, authentication, and any LMS tie-ins.
We’re currently working on installing/configuring the Vanderbilt Bb Extension for iTunes U. Just wondering if there is an easier or better way to set this up.
-Matt
Rochester NYTo the best of my knowledge, Apple no longer will host content. You have to provide your own hosting.
Regards. -
Presentation services and BI server stopped
Hi,
Presentation service and BI server stopped with the following error.
“The description for Event ID ( 21 ) in Source ( Oracle BI Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [47055] 30000 is too large for MAX_GLOBAL_CACHE_ENTRIES, and it is reset to default value, 10000..
Any suggestion on this..
Thankscan you provide more information. where did you find this description,in nqserver.log?
Also check your saw0.log.
Regards,
Sandeep -
Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button
In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?
Hello,
In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
Thanks,
Shubhi -
In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
Graphics Distortion in Presenter 7 and Breeze
I am new to using Breeze, my company uses it. I noticed that the graphics in our .ppt presentations are blurry quite often when we publish the Breeze presentations. We usually insert .gif or .jpg graphics (usually screen shots of applications). I decided to give Presenter 7 and PowerPoint 2007 a try to see if that resolved our issue. It did not.
Does anyone know what we should be doing with static graphics to improve the quality of the graphics (make them crisp instead of blurry) in the final product?Rachael,
Quick question: are you using any special stylizing/treatment of your graphics in PowerPoint? I ask becuase I've seen instances where using effects like drop shadows, glows, etc, (which are available in PPT 07) actually result in low-quality, often blurry, graphics after publishing to Presenter content.
Same goes for taking screen shots and then applying lines/strokes to those graphic elements; it just introduces more .jpg artifacts rendering the graphics practically useless.
I should also mention that after hours of testing, I've also witnessed grouped objects in PPT look blurry after publishing, so I typically look to ungroup whatever/whenever possible. If that can't be done, then usually it means a trip to Illustrator or Photoshop to manipulate my graphics.
Bottom line, any time specialized treatment is necessary you may have to look outside of PPT to create your graphics; then import as usual and see if that helps any.
In any event, just thought I'd throw that out there.
Rob
http://www.robrode.com/yabb/
Maybe you are looking for
-
Getting error while scheduling load from one cube to another
Hi, I have create one cube ,which has got loaded from two data sources and load into the cube went successful.I have created copy cube and schedule the load into copy cube from the base cube,where i am getting error message syaing that"New work Area
-
JEC is a pure java api to acess microsoft Exchage server. http://jec.zapto.org/
-
Hi, I would to apply a condition in a query with a structure row with selection characteristics for exclude the rows with blank values. I want to apply this condition on all characteristic selection but during the creation of condition I must seletc
-
Hi, So i was attempting to get my mac and my ipad calendars to sync up but having no such luck when after a lot of research i found it was becuase of my icloud and i needed to verify my apple id password. however when I attempted to do that i get a m
-
I need to design a BPEL human taskflow which would be triggered from an ADF page. I suppose the BPEL taskflow (SOA server) & the ADF page (Application server) in real-time could be deployed in two separate servers (probably these servers could be run