Presenter 6.0 Audio Editor Problem

It appears that the new version of Breeze - Presenter 6.0 has
restricted the audio editor window to a fixed size. You can't grab
a corner of the window and expand it as was possible in the
previous version.
When doing a great deal of audio editting, having the window
confined to such a small size is a real pain.
Why was this necessary?
Had I known of this restriction I doubt I would have executed
the upgrade.
George Kunz
Intel Corp.

Thanks guys for your input
I finally realised the update did something to my TV when I tried to switch back to a normal DTV channel. Turning the TV on and off wasn't enough - it needed to be turned off at the power point and have the hdmi cables reconnected one by one.
Hope this helps anyone else with the same problem.

Similar Messages

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Audio editor won't open in Captivate 4

I can't get my audio editor to open up in Captivate 4. I imported some audio on the first slide, with the intention of having it play over the next four slides. When I imported it into the presentation, I did get a prompt asking me if I wanted to break it up over several slides, I choose that option and then nothing. I tried then to open up the Audio editor on its own and nothing. It wouldn't open. Could this be another Vista 64 bit issue? Please advise, I'm really pulling my hair out over here.

MY SOLUTION!!
I was having the exact problem and I promised that if I found a solution to my problem I would come back and share my solution. Unfortunately I can't tell you if all of these things that I did were needed. But I can tell you the order that I did them in and after doing which one that the problem went away. The truth is after each one some functionality was returned. The first thing I did was to install the "New" captivate 4 update patch. located here http://www.adobe.com/support/captivate/downloads.html
After doing that my audio sound quality improved greatly and I was able to use the audio <play> and <stop> buttons on the slides and in the properties tab. Before this when I press them I could not hear the audio I had recorded. I could only hear it during project preview. But, I still could not launch the audio editor. I could record and hear the play back but I could not launch the editor to do edits. When I clicked on audio edit Nothing happened.
The next thing I did was try the fix that was suggested for those running XP even though I am running Vista. It is a registry fix so I figured if there was a registry problem with Vista it would work just as well on Vista. This fix is located here: http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installation.html
But while that did allow he to feel comfortable knowing my registry wasn't the problem it "Didn't" fix the audio editor not launching problem. In short I still couldn't get the editor to come up. Pressing the edit botton had no effect at all. (NOTE: Make sure you do this all as the Admin)
FINALLY!! I came across a post from a user "commando dhruv" who wrote:
Hi,
Try to delete this file :-
C:\Documents and Settings\<username>\Application Data\Adobe\Adobe Captivate\captivate_v30.dat
This will clear all the UI location/size preferences. Now when you start captivate it start afresh.
Might do the trick.
And since my OS is Vista not XP and I using Captivate 4 not 3 I went to c:\user\<username>\appdata\Roaming\Adobe\Adobe Captivate and deleted the cativate_v40.dat file and WOW!!!!!! it WORKED.
(besure to unhidden the hidden files and folders or you won't be able to see the appdata folder. Hope you have the luck that I did.

Logic Pro X help: Track/File menu not showing up in audio editor. How to fix?

Hello,
I am a amature musician that has been using logic pro for a little while now. I recently tried to use the time and pitch machine to stretch a sample to my project length. I open up the audio editor and behold! No file menu. I have looked through all the mues and I cant seem to find it anywhere.
Has anyone experienced this problem and do they know how to fix it?
Thank you

You are in Track view, where you need to be in File view. Those tabs are just outside of your screenshot, it seems. You must have either an enormous screen or a big screen resolution.
As KC said, flex is a more versatile tool, but if you have a set workflow, then the T&P machine is still there.

Audio editor not working in Cap 4

Until recently, everything was working fine. A few days ago, the audio editor started getting flakey - stopping the playback before the end, Now it doesn't play back at all. The audio plays fine in the preview and published version. It seems to a specific project, but the others are still flakey as well.
Needless to say, I'm on an urgent deadline - that's when these things happen. I'm trying to avoid exporting to Audacity to edit, because it's a pain to import it again.
Should I reinstall Captivate 4? Any other suggestions?

Hi there,
I would recommend that you start by making sure you have Captivate 4.0.1 installed (Build 1658) You can check this by carrying out the following steps:
1. Open Adobe Captivate
2. Choose Help > Updates...
If that doesn't solve the problem and you are using Windows XP then you might also want to take a look at the web address I have included below. It is possible that your Windows Registry is corrupt or has incorrect permissions.
http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installation.html
HTH
Best - Mark
Visit the macrofireball blog

Audio sync problem after scrubbing

I'm trying to piece together some clips from a TV series called Legend of the Seeker. I'm using Premiere CS4 4.0.1, Vista Ultimate 64-bit.
Placing the hour-long video in the Source Editor allows me to play the video fine from beginning to end, but if I start scrubbing through the file, the audio unsyncs itself immediately.
Here's a screenshot of the video in GSpot:
http://img14.imageshack.us/my.php?image=premieresync.jpg
Setting IN and OUT points and then dragging a very small clip into the timeline has the same result.
Any ideas would be very appreciated.

You are actually pretty lucky to just have Audio sync problems, though I do not know why scrubbing would make any difference. With both Xvid and DivX one more often gets no Audio, or no Video.
Agree 100% on the 3rd party conversion, prior to Import into PrPro.
Hunt

Audio sync problem downloading VHS-C

I've downloaded a straight VHS tape (with no audio sync problems) into final cut pro once I had changed the Camera setting to 32Khz and the capture and sequeence presets to 32khz as well (it was all aout of sync when the settings were 48Khz).
The problem now, which is driving me MAD, is I have 13 hours of VHS-C tapes, which I have put into a VHS cassette converter to download and the audio is out of sync. The capture presets are the same as above (i.e. 32KHZ) . Why is this? I downloaded them initially at 48Khz (settings on the camera 48Khz and FCP at 48Khz in capture and sequence settings), but this was also out of sync.
Why is it different from one VHS tape to a VHS-C tape?
I hope there is a God out there that can help with this one?
Thanks!

Eagleray:
I capture through a ADVC-100.
I use to find the same problem playing VHS tapes with a standard VHS player from time to time and never solved it. The out of sync audio appears when capturing some specific tapes from specific sources:
- All my home tapes recorded in my old VHS recorder shows a audio problem; not specifically out of sync, but some audio "cracks" from time to time, like an electronic noise. No way to find a capture setings that works.
- Some customers VHS tapes that showed the out of sync (no noises) and again, no combination of digitalizer settings made it works. Had to resync the audio editing and stretching in an external audio editor or cutting shorts parts and syncing them with video. The our of sync appears in small captured portions, like 10 min or so.
- Never found a sync or audio problem capturing from VHC-C (the small VHS tapes) playing them with the tape adapter in the player.
I google long hours about this problems and all that I learned is that some old VHS recorders had not a "synchro" signal in the tape.
As I told you, I don't use any pro VHS deck, just my consumer "state of the art" VHS home recorder.
I hope there is a God out there that can help with this one?
I don't think HE visit these forums.

Audio Synch Problem Exporting From imovie 6

I have a created a large imovie project in imovie 6 using pictures and imported video. The project uses a lot of extracted audio voice overs on top of the photos.
While trying to export the video to quicktime or idvd, the audio gets out of synch at various points. I have tried exporting it many times using a variety of different options, and the audio remains out of synch, sometimes in different places with each export. Lastly, I have extracted the audio from the video clips for some of the more problematic portions of the project, but that has not proven successful.
The odd thing is that the movie plays perfectly while in imovie.
Any suggestions as to how to correct this issue?

Hi
Tedious situation.
To avoid this I'm kind of strict in Audio in two ways
A
• Material used if video is in same frame per minute - else I use JES_Deinterlacer to convert all to one standard. I use PAL = 25fps - one of my Cameras records ONLY in 30fps - (some people records in 24fps - to get a movie feel - I never)
So keeping the fps from Camera to (in my cases) DVD - gives a supperior result
B
• I'm strict in the kind of Audio formats I use - ONLY .aiff (or from miniDV tape Cameras) AND THEN 16-bit 48kHz or from Audio-CD (still .aiff as on normal CDs) and here 44.1kHz
If Camera is set to record in LP-mode or 12-bit Audio - Then I use an external Audio Editor to get this right
If from iTunes - I never use this directly - BUT - collect needed audio into a New PlayList - BURN THIS as a Standard Audio-CD (NO .mp3 - but .aiff here too) and then use the files on this CD in my movie project's in iMovie HD6 or FinalCut any varsion (or if forced to - iMovie'11)
Else read this
Audio Sync problems
• 12.bit - should be 16.-bit (from miniDV tape - set Camera right)
Avoid recording in LP-mode on miniDV tape. This tape must be play-backed by same Camera. When Camera dies
so does the video material in worst case.
• .mp3, .avi etc strange file formats - should be converted to .aiff 48kHz 16-bit
• in iMovie (up to HD6) - do - Extract Audio - it most often helps
• from iTunes - collect into a PlayList then Export out as an Audio-CD (not .mp3) and use the files on this (.aiff 44.1kHz)
• There seems to be a problem with slow-down resp speed-up. Has to be in specific steps as 25% 50% 150% 200%
else problems will arise
• Audio problems when transitions is in use - especially iMovie HD/HD6
a. Select video clips
b. Extract Audio (Advance menu/Extract Audio)
c. Now apply transition
d. eventually fine-tune end and start of extracted audio clips
Yours Bengt W

Itunes wont launch due to audio configuration problem

Itunes won't launch saying there is a audio configuation problem, this started all the sudden no new software added no updates, no configuration changes. I've tried uninstalling and reinstalling without improvement and all other audio programs work fine. any ideas?

This is usually a Quicktime problem, see this article:
http://docs.info.apple.com/article.html?artnum=304424

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Presenter 6.0 Audio Editor Problem

Similar Messages

Maybe you are looking for