Presenter 8 is not appearing in the ribbon

I have just installed the trial of this product on a Win 7SP1 system with Office 2010 (64bit). These meet the system requirements specified here:
http://www.adobe.com/products/presenter/tech-specs.html
Presenter does not appear in the ribbon. I have run the installer twice now. There is no disabled COM add-in.
What have I done wrong please?

Hi Alpi,
Thanks for your assistance. I did download the 64 bit version I believe: "Presenter_8_1_x64_LS12"
I have uninstalled and re-installed but still the same problem. I assume I can add the add-in manually but am not sure which file.
The reason for trying this software is to see if I can use it instead of Captivate to produce some training that comprises a series of videos clips (one per slide) with a quiz and table of contents. This will be delivered via an LMS and provide a certificate on completion of the whole (or most) of the presentation. The problem with Captivate is that I am having problems with iPad delivery; there is no playback control for the videos.
TIA

Similar Messages

We have acrobat 11 and office 13. In word the Adobe tab does not appear in the ribbon

we have acrobat 11 and office 13. In word the Adobe tab does not appear in the ribbon

You have to update AA XI to work with AA 2013. You may also have to open the OFFICE tools and enable the add-ons. There is no tool in some of the OFFICE applications. You can check the list in the PDF Maker folder in Acrobat.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

New Hard disk is not appearing in the System Profiler

I am doing a fresh install using my ligitimate Snow Leopard DVD on my USB disk.
My SSD is not appearing in the System Profiler under Hardware>ATA
or under Hardware>Serial-ATA
It is a PATA device as was the original disk I've replaced.
So I have NO disk to install onto.
Any ideas what the problem could be?
===
History
My hard disk died, and I am replacing it with an SSD.
I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
(I can send this back if I have to)
The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
The SSD is preformatted (but not necessarily to Apple formatting).
With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
I cannot find any information as to which Pin on the original HDD is Pin 1.
I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
I've double checked the connections inside.

Thanks, this was the answer.
The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
I knew where Pin 1 was on the new SSD but could not see it on the old drive.
The original 80GB hard disk had Pin 1 is towards the middle of the computer.
Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
It is now working well.
(Although I now have a different problem restoring from the Time Machine. )

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
What could be causing these not to appear in the cross reference pane?
Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
Technical Details:
InDesign CS5.5 - Version 7.5.3
Microsoft Word 2010, File type .docx

I have found the possible cause of this problem!
If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

Why do my 3rd party loops not appear in the "Loop" tab?

I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
Does anybody know the cure for this?

If you drag your .wav loops into the arrange area do they function properly? If not, you may need to convert them using Apple Loops Utility. After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
You might find this old thread useful:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

Urgent:SUS PO not appearing in the PO list for vendor's user

Hi experts,
I am working on SUS. SRM5.0 single box scenario. PO is created by the purchaser and is successfully transfered through XI. But this PO is not appearing in the PO list of vendor's user. Please let me know what can be the possible reason.
following roles are given to the user:-
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_BBP_STAL_BIDDER
SAP_EC_BBP_BIDDER
Also checked vendor data. Communication method is selected as XML.
After creating PO and transfering it - message comes-
Information Processing BBP_PO_SEND_XML Is Started
Information Action successfully completed
Please help. It is very urgent.
Thanks and Regards
Kapil

Hi Kapil,
do you have the same result when deleting all roles and only using role SAP_EC_SUS_ORDER_PROCESSOR?
Are vendors successfully replicated into SRM and a user created via Web
Txn "Manage Business Partners"?
Did you maintain table BBP_MARKETP_INFO?
Did you replicate the company code using Txn BBP_SUS_BP_ADM?
In any case there is also an inital replication of vendors
from MM to SUS via BD14 necessary.
Thanks,
Claudia

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

Press the escape (esc) key to exit full-screen mode.

HT1414 HOw do I back up and restore If I plug my ipod in and it does not appear in the devices column. I have a white screen and i'm trying to fix it and nothing is working :(

How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help

Take it in for repair/replace to your local Apple retailer.

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

The word "ORIGINAL" is not appearing in the print out of documents

Hi,
For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
Thank you,
eric

Hi Eric,
The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
The solution is to chnge that remarks in the PLD to text "Original".
Cheers

I can´t sync my iphone, it do not appears on the itunes screen, what can i do?

i can´t sync my music to my iphone beacause it do not appears on the itunes screen, i have do all the itunes support but it doesn´t help me.

Please Click on the 'Print Screen' for better view.

Presenter 8 is not appearing in the ribbon

Similar Messages

Maybe you are looking for