Presenter Display does not update current slide or run timer ...

Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!

Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio.

Similar Messages

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

E52 Date Display does not update and reflect the c...

Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?

Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!!

Function Module does not exist error during query run time.

Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.

even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.")

Name in profile does not update

Hi, I changed my name in my profile just to see what it would look like and then I changed it back, but it looks as though it does not update. I tried several times doing this and same results. I need my Skype name to how I save it on my profile.
Please assisst.
Thank you.
Maurice.

I understand what you're asking, however the PowerShell script doesn't fix the underlying sync issue. It only masks it by resolving it for that single time. You'd have to re-run it constantly to keep Site Collections updated.
If you run stsadm -o sync deleteolddatabases 0, you run that once and let the UPA -> SharePoint sync timer job complete. The UPA -> SharePoint sync incremental timer job will pick up after that and regularly keep the user's up-to-date.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

HT5824 my contact list does not update to its current state. After I sync to Itunes or after I back up to I cloud Also I did a doccuments and data restore and it still didnt change. How do I fix this?

My contact list does not update to its current state after I sync it to itunes or back it up to icloud I did a documents and data reset and the contact list still didnt change.. How do I fix this?

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Sale Quotation Formatted Search displays correctly but does not update OQUT

I have a formatted search, intended to show a deposit amount of 50% for the document total, and refresh whenever the doc total changes. It displays correctly on the Quote header screen UDF area, but OQUT does not update. Pressing Shift-F2 returns 'internal error'. The first time the Quote is entered the right value gets in OQUT, but never gets updated after that.
The UDF is OQUT.U_Deposit. The formatted search query is:
Select ($[$33.88.number]*.05) and it is set to refresh reglaurly when Document Total changes.
Thanks for helping to figure this out

Which field are you referring by
$[$33.88.0]
The screen variable for
Document Total $[$29.0.Number]
Total Before Discount $[$22.0.Number]
Also I notice for 50% you have used .05 which is actually 5%
Try this query
SELECT ($[$-29.0.Number]*0.5)
The minus is needed since it is a UDF on the header which is a seperate window.

Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

The tab bar in Safari does not update automatically

Hello,
I have a strange problem with Safari full screen mode and the tab bar always displayed, it does "not update" alone. In fact when I, for example, two tabs and I created a third (by clicking a link) it does not appear immediately. I have to either click on the tab bar and pretend to move one, either click the "Naviagtion tabs" for bar tabs emtte update.
A little heavy, huh?
All my software are up to date and even reinstalled recently, but the problem is still present.
OS X Lion Mountain / / Safari 6.0.2
Regards

I solved the problem by uninstalling Glims.

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

HT2513 The date on my dock does not update automatically ? - Ps anybody.

I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.

I solved the problem by uninstalling Glims.

Hyperlinks to URL added in course in Adobe Presenter 9 does not open.

I have a URL added in my course slide and I want student to be able to click on it and see the video on the website. But the URL does not seem to work all the time. It seems to work in Internet Explorer once in a while and does not work at all in Chrome or Firefox. Any suggestions?

Make sure there isn't a shadow on the hyperlink. That can cause them to be non-functional when Presenter converts it.

Aperture library does not update in iLife media browser

I had the following problem for over a YEAR now. The *photo browser* does not have current Aperture information available. I looked everywhere for a solution, including this forum and the support database. The proposed solutions were as follows:
1. Turn on iLife sharing and auto-preview creation in Preferences - DUH!
2. Turn off iLife sharing, restart Aperture, then turn it back on - DOES NOT WORK
3. Hold down Command-Option when starting Aperture and rebuild library - DOES NOT WORK
4. Trash ApertureData.xml file - DOES NOT WORK
5. Trash ApertureData.xml as well as Aperture.aplib folder - DOES NOT WORK
I'm sure there were a few more things I tried. I thought I'd ask a "genius" at the Apple store. I realized then (again) that that moniker is gravely misplaced.
The crux of the problem is that the ApertureData.xml is not kept up-to-date by Aperture. That XML file is used throughout the Mac to provide photo browser access and insertion of preview files into Mail, iLife, iWork and other supported programs. Why that file stopped updating is a mystery to me. Some people suggest it has to do with the upgrade from 1.5 to 2.
For all those super-frustrated Aperture users who have had the same issue and cannot fix it using any of the above methods, here's ultimately what I had to do to fix this.
1. Export every one of your projects
2. Create a new Aperture library
3. Import all projects into the new library
The only items that do not transfer are the ones situated at the root level of the library. Those will have to be recreated manually. Since I only had a few smart folders there, it did not affect me gravely. The keyword list should also be created when you create the new library. If not, look for Keywords.plist in the old Aperture.aplib folder.
I spent literally WEEKS looking for this solution, it is nowhere to be found. I cannot be the only one running into that problem. I'd be curious to know if there are others out there with the same problem.
Thanks!

Wow, this is not encouraging. I have a slightly different version of this problem. I had my Aperture library showing up (and updating as I expanded it) in the Media Browser, and all was well until I bought a new Mac and transferred everything over from the old one. For whatever reason, not everything makes it over. Now, on the new Mac, my Media Browser only shows images from Photo Booth--not even iPhoto! I feel your pain and share your ire.
Someone mentioned September (not coming soon enough). Is there speculation that Aperture will be updated (finally!) when Snow Leopard releases?

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

Presenter Display does not update current slide or run timer ...

Similar Messages

Maybe you are looking for