Presenter Display Options Are Missing in Keynote 6?

I upgraded to Mavericks / Keynote 6 yesterday.
I have a dual monitor setup on my iMac27, and today when I'm trying to play a keynote presentation, it displays on the wrong monitor.
I seem to be unable to switch it to my primary monitor, because the "Presenter Display Options" tab (under preferences) that was present in the previous version is alltogether missing.
Anyone else have this issue, and a work-around?
Where are the "Presenter Display Options"?
Thanks, JB

Hi, everyone.
I, too, have encountered the same problem the first time I fired up Keynote to an external projector. After trying out all the suggestions posted here, I stumbled upon a simple remedy.
1. Ensure that the "Enable Presenter Display" checkbox is ticked under the "Slideshow" preferences tab of Keynote. I believe this is enabled by default.
2. Then right click the "Keynote" icon at the dock, and under "Options," assign to "None" or "All Desktops."
I found that this enabled Keynote to present my slides in the exact same way as the previous Keynote version did. Whether assigning it to "None" or "All Desktops" makes any difference or not, I cannot tell, but both options work. I hope this helps.

Similar Messages

Why navigation bar or Flash options are missing?

First of all, thank you to set aside time to look at this issue.
1- Product:
     Dreamweaver / Trial Version
2- Behavior:
     I am trying to create a navigation bar using images but the navigation bar option is missing when I try to get it from the insert panel - insert/common/image/???Navigation bar???.
Also the flash text, flash button, flash paper, flash video options are missing from insert/media from the application menu bar.
3- Browser / version
     Mozilla Firefox / 3.6.10
4- OS / Version
     Windows Vista / 32 bit - Service Pack 2
Thanks you for your assistance.

F1 (help) Spry Menus.
Spry Widget Samples -
http://labs.adobe.com/technologies/spry/samples/
Using Spry with Widget Browser -
http://www.adobe.com/devnet/dreamweaver/articles/spry_menu_bar.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Government alerts options are missing

Hi,
Both AMBER and Emergency alerts should be located in Settings -> Notification Center: at the bottom of the page, but i cannot see it there. The options are missing.
iPhone 5s, iOS 7.1.2
Does it depend on the cellular carrier?
Thanks a lot.

zroytman wrote:
Does it depend on the cellular carrier?
Yes.

Fonts are missing in keynote since I use iOS5? help!

in all my slides for an important presentation the text is disordered because fonts are missing since I downloaded iOS5.
Can somebodiy help me?

Judy McCrorey |
Account Manager and Support
Unit 1 14 Rothcote Court Burleigh Heads QLD 4220 | Telephone: +61 07 5507 5200
PO BOX 450 Mudgeeraba QLD 4213 | Facsimile: +61 07 5522 0163
Email: [email protected] | Web: www.copyline.com.au
This message (including attachments) is intended for the addressee named above. If you are not the addressee named, you must not disseminate, copy, communicate or otherwise use or take any action in reliance on this message. If you have received this message in error please notify the sender and delete from any computer. Whilst all care has been taken, Copyline disclaims all liability for loss or damage to person or property arising from this message being infected by computer virus or other contamination. We thank you for your co-operation.
HI SnakEyz02, a screenshot of my gobbledygookness below in dreamweaver. Your help greatly appreciated!

Reader 9 - "Print" and "Open with Adobe Reader..." options are missing from the right-click menus.

Since upgrading from Reader 8 to Reader 9, Windows XP users are no longer able to right-click 1 or more PDF files from Windows Explorer and choose either "Print" or "Open with Adobe Reader...". Those options are no longer listed in the right-click menu. We have experienced this on several computers. I downgraded a PC to Reader 8, and these options re-appeared, then disappeared again when I upgraded back to Reader 9.

Could you tell me which version of Reader 9 you are installing?
Please give the exact version it is showing you from Help | About Adobe Reader.

Quicktime Export options are missing (only in AME)

Hey,
I already searched around for a while and also found another thread in this board, as well some info in the official documentation, saying that AME only installs certain export options, if it's not installed within the proper package of applications (like premiere or after effects).
Well, I did install it as part of the Master Collection, and also have both Premiere and AFX up and running.
The Initial install was a horrible procedure, since there was still some photoshop cs6 beta file lurking around and just wouldnt leave, even with the CS cleaner tool.
When I finally managed to install CS6, everything worked fine, except one major flaw.. When I export a file from premiere as a quicktime, everyhting works as it should. But when I hit "send to AME", the quicktime preset just doesnt make it's way over to the media encoder, but I have only h264 and 4 other formats to choose from. Just no QT available. (I'm on a mac).
I already tried installing the entire package over the original installation, but it didnt help. I also have CS6 installed on my macbook, where everything works perfectly fine. I compared the media encoder folder on both machines and it's identical in size. In the library I wasn't able to find any media encoder related files.
Please, does anyone have any Idea how to get QT export in ame up and running again without going through a complete cleansing of my system and reinstall the whole package? I'm in the middle of a project now and would really like to have it working.
(it worked before in cs5, btw)
THX

Just like chfilm I have the same problem with AME CS6 on Mavericks.
I came here after having resolved another problem, namely because Premiere Pro (PP)
and AME were not even launching as soon as the Quick Time Bundle Host were being loaded on the splash screen – same thing happened with PP (see screenshot).
A Forum discussion for that is here: https://forums.adobe.com/message/5521256
I followed the correct answer suggestion and deleted two files in AME as well as in PP.
They were called "ExporterQuicktimeHost.bundle and ImporterQuicktimeHost.bundle".
Except, that I didn't have a file called "ImporterQuicktimeHost.bundle" but a plain "ImporterQuickTime.bundle".
Since the Quicktime Presets in AME are now missing, I think that this problem is related to the problem of this thread.
Here is what I tried to resolve the case of the missing presets:
- I tried out the solutions under post #8 (the correct answer)
- and #25 by leejk of this thread.
Neither worked for me.
- I also tried uninstalling the whole adobe suite and used the Adobe Cloud Cleaner Tool and then reinstalled the Adobe Suite.
Nothing changed.
- With the newly installed Adobe Suite, I followed post #4 of this thread Uninstalling AME CC
to make sure, my files weren't corrupted. (If you look into the thread: instead of a version 7.0 I had a version 6.0.)
Btw: Before uninstalling the whole suite, every application, including PP worked – except of AME.

After upgrade to Mavericks display options are no longer available

I am using a sony kde42xbr950 tv for my display for my mac mini. However, after I installed os x 10.9.4 I can't see the menu bar and neither options, resolutions below 720p, nor overscan is available to be able to fix it. I tried doing it with the tv screen options but that didn't change anything. Any suggestions? I can use it this way, but it isn't optimal.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

ITunes 11 language support options are missing

I'm trying to use subtitiles with a movie I imported to iTunes. I know you can change language and subtitle settings by -iTunes-Preferences-Playback and selecting the language from the menu. Except I dont have the menu. It's just not there. I tried reinstalling itunes and it make a difference. Can anyone help please?

I confirm the same issue on a 10.9.3 system (upgraded from clean 10.8 install), iTunes 11.2.2, MacBook 13" Aluminium, late 2008. Also checked my girlfriend's Win7 notebook: missing language/subtitle prefs even there. Seems to be a casual thing.

Upgraded to most recent ID CC 2014 version and now my Export Options are missing

I'm on a Mac running 10.10.2 and when I hit EXPORT, I used to see Option for Interactive PDF, Print PDF, JPG etc. Since I installed the latest ID CC 2014 this option is just gone. I rebuilt my prefs and it didn't help, no option.

Based on that answer, it looks like you have to reinstall InDesign from a new download. Had issues with updates to Premier and Illustrator on the last set of updates to CC 2014. I restored those from my TM back-up and haven't bothered to update again. Hard to lose hours of production to work around the problems with incremental updates.

How to start Presenter Display?

Hi all
This is my first go at Keynote '09 and I love it. I want to use the Presenter Display function but I can't find it. I know how to go into "view" to customize Presenter Display options. But for the life of me I cannot figure out how to play Presenter Display on my laptop while playing the display for the audience when I press "play". Please help me see the obvious. BTW-presentation is this Friday morning!
Thanks so much!

But do you have "secondary display"?
Open System Preferences > Displays > Check at the bottom "Show displays in the menu bar".
In the menu bar near the clock you'll see LCD monitor icon. Click on it and make sure you rMac doesn't show everything in Mirror Mode. Turn it off, so that you have 2 separate screens. Now it should work.
And remember — every time you connect new projector, Mac automatically turns on Mirror Mode, which you have to turn off. Mac does remember your chosen mode for previously connected projectors.

During presentations, Keynote slides are small. If exported to ppt, some photos are missing.

During slideshow presentations, if I use Keynote the slides are small. If Keynote is exported to ppt, numerous photos, slides are missing. Can i embed photos in Keynote - would that resolve when exporting?

I haven't seen this, but I don't do a lot of video exporting. My first guess would be that the files may be larger than the prior files... attempting to play at a higher bitrate and the PC is choking on them. Can you compare against a prior exported .mp4 file to determine if the bit rate is any different? Also, make sure that VLC hasn't been updated either.

When using presenter display, my videos are jumpy. Why?

Hello: I just upgraded to Keynote 3 and am having a nightmare. I use the Presenter display mode so I can see the next slide, (no mirroring) and use a lot of Quicktime video clips in my engagements. In Mirroring mode they run smoothly. In the presenter display mode they stop every second for half a second - making the video extrememely irritating to watch. It worked perfectly in Keynote 2. It 's not the projector - I've tried it on seven projectors that I used prior to Keynote 3 and it happens on all of them. I've tried using different resolutions, different refresh rate modes, etc. Nothing make it work right.
I do 100 speaking engagements a year. HELP! Don't make me go back to PowerPoint!

I have been having the same problem both in KN2 and in KN3. I am a speaker as well and I use about 25 QT videos in my keynote presentation. When I go back and view the QT files outside KN I still have jumpy, choppy parts of my videos. The weird part is that the the videos are choppy at different sections and then they will be fine for a week. I am stumped and from what I see so is Apple. Apple has replaced 2 logic board and I have spent hours on the phone with tech support and still no idea. All I know if about 15,000 people have seen the apple at the front and seen the choppy video and as you can guess all the PC guys always mention how choppy the video was. Not good promo for Apple.
I am interested to see if anyone has any answers to this.
Thanks
Brett

Keynote 6 "fonts are missing"

I've installed a clean install of Mavericks and Keynote 6 (I had version 5).
Now I get the error "4 fonts are missing" when I open a old keynote presentation.
But how can I add the fonts when I don't see WHAT fonts are missing?
I can only click OK or cancel and when you click OK and select soms text and look in the TEXT panel the font says blank.
Is this just a big bug of can I see somewhere else what fonts are missing?
Thanks!

I get the same error. I figured out one of the fonts, which I hadn't installed yet on the box. Didn't help. Even though the new font shows up in the font chooser after opening the presentation, Keynote insists it's missing and uses a default choice while opening the font.
I'm not playing games here; this is a teaching presentation I've spent a few hundred hours on over the last 4 years. This bug effectively breaks dozens of slides because they have builds and highlighting that were to line up with the original text. In other words, I can't use Keynote 6 with this bug.

Customizing presenter display on keynote 6.0

Customizing Presenter Display on Keynote 6.0
I use to be able to customize the presenter display but since I upgraded to 6.0 that option is no longer available. Does anyone know if presenter notes can be moved from the bottom od the screen to the top?
Thank you

Seems that you can't do it anymore. I am continuously bewildered and frustrated with Apple's approach to the latest iwork release. Why o why did they destroy such an awesome suite of tools, make them less intuitive and delete some of the most useful functions - the things that used to make them so much better than microsoft power point and word???

Keynote and Docs to go are missing after iOS5 update

I recently upgraded my iPad2 to iOS5 and now my keynote and docs to go apps are missing. What do I do now?

If you previously downloaded them they should be free. I know it looks like you will be charged but if you click on the app to install it, enter your ID and start the download, a box will pop up saying that it looks like you have already downloaded this app and it will download it again (free of charge). That has been my experience.

Presenter Display Options Are Missing in Keynote 6?

Similar Messages

Maybe you are looking for