Presenter Display Problem

I updated to Mavericks and Keynote 6 last night. This morning I find that my class presentations do not display correctly. I have an external monitor (not via AppleTV) connected (and a projector in the classroom), and when I play the presentation the presentation appears to be overlaid on top of the presenter display on my main screen. I can see the edges of the presenter display under the main presentation screen (which is on my main monitor). The seconday monitor simply displays my desktop. This appears to be a Keynote problem since the seconday display appears to be working fine with everything except Keynote. If the solution is to change one of the settings in the presenter display, I am in trouble, since I cannot get to the presenter display controls as they are covered up by the display screen when I go to presentation mode. There appears to be no other way to access the presenter display settings (why aren't they in the Preferences?). The only way that I can find to view the display on the external monitor is to set the screens to mirror, but then (of course) I loose the presenter display entirely.
Any ideas?

In another thread, macmine and mainman1303 identified an useful workaround. Here is what you need to do:
1) Make sure the new version of Keynote has an icon on the dock.
2) Control-click on the dock icon, and go to the options.
3) Change the setting from 'Desktop on Display 1' to 'All Desktops'
4) When you run your presentation the first time the presenter display may come up on the projector/external monitor. If so, press the 'x' key to swap monitors (or use the icon in the upper left corner of the presenter display. After that it should work fine.
This seems to solve the problem, but there is still a bug here that needs to get fixed. And the options (and others) should be in the preference settings, not buried in an obscure place like the dock icon.

Similar Messages

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

How can I make sure the Presenter Display will show up?

I use the option "use alternate display to view presenter information", and it works fine with my secondary display at home. The presenter information (Presenter Display) with my notes etc. shows up.
But when I gave a practice talk at my university, the Presenter Display did not show up, although all settings were the same. Back at home with my own secondary display, it works fine again.
How can I make sure that the Presenter Display will always show up on the secondary display?

I have a similar problem. Last year I gave a presention at a client's office using my Macbook. I had the presenter display on my Macbook screen and the presentation on their projector.
A few months ago I upgraded to the latest Macbook Pro 15" (plus there have been upgrades to OS X and Keynote in that time). This time when I tried to run the same set-up my MBP screen went blank. I tried changing settings for Keynote and System prefs with no success. The only way I cuould give the presentation without needing to look at the projector screen was to mirro the displays (and lose the Notes of course). Maybe there is a bug with the latest Keynote?
OS 10.5.7
Keynote 5.0.2 (776)

Display problem after RAM Upgrade to MS6712

Hi there,
after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

OK, here's the info on my PSU;
It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

When I customize my presenter display it doesn't work! I still get on my screen what shows on the main display.

When I customize my presenter display so that I can see the time and the next slide on my screen, it doesn't work. I get just the normal view on both. Any ideas?

In Keynote Presenter Display Preferences ensure that Alternate Display: "Use alternate display to view presenter information" is checked
If using a laptop such as a MacBook Pro, toggle the Dual Display Key (typically F7 - has two rectangles on the key) to switch views
It is probably one or both of those causing your problem.
Good Luck.

Display problem in Analyzer

Dear All,
I've met 2 display problems in Analyzer:
1) some key figures are displayed like "~ 90kg ".Why will the "" be displayed?
2) some others just have a "*" presentation. These are not totals which sum quantites with different units of measure.
Looking farward to any ideas.
Regards,
Bolun
Edited by: bolun li on Oct 14, 2008 3:14 AM

Hi Bolun,
1) some key figures are displayed like "~ 90kg ".Why will the "" be displayed?
--> Strange, try to drill down lowest level and check & validate data(correct or not)
2) some others just have a "*" presentation. These are not totals which sum quantites with different units of measure.
--> Due to different Units of Measure. Try to drill down to lowest level, you can see proper values.
Or convert all different Units of Measures into one Unit at Transformation/Update Rules or Query level.
Please check: [How To... Report Data in Alternate Units of Measure|http://sapbwneelam.blogspot.com/2008/09/how-to-report-data-in-alternate-units.html]
Hope it Helps
Srini

When using presenter display, my videos are jumpy. Why?

Hello: I just upgraded to Keynote 3 and am having a nightmare. I use the Presenter display mode so I can see the next slide, (no mirroring) and use a lot of Quicktime video clips in my engagements. In Mirroring mode they run smoothly. In the presenter display mode they stop every second for half a second - making the video extrememely irritating to watch. It worked perfectly in Keynote 2. It 's not the projector - I've tried it on seven projectors that I used prior to Keynote 3 and it happens on all of them. I've tried using different resolutions, different refresh rate modes, etc. Nothing make it work right.
I do 100 speaking engagements a year. HELP! Don't make me go back to PowerPoint!

I have been having the same problem both in KN2 and in KN3. I am a speaker as well and I use about 25 QT videos in my keynote presentation. When I go back and view the QT files outside KN I still have jumpy, choppy parts of my videos. The weird part is that the the videos are choppy at different sections and then they will be fine for a week. I am stumped and from what I see so is Apple. Apple has replaced 2 logic board and I have spent hours on the phone with tech support and still no idea. All I know if about 15,000 people have seen the apple at the front and seen the choppy video and as you can guess all the PC guys always mention how choppy the video was. Not good promo for Apple.
I am interested to see if anyone has any answers to this.
Thanks
Brett

DataGrid display problem

Hi,
I've given specific height to my grid, i've lots of records
in the grid. Say, my given height to the grid display 5 records at
a time. The problem is the partial of six record has also coming
beneth the grid! Even I use grid.invalidateDisplayList method, it
also coming at the beneath of the grid! and when i'm scrolling the
grid, that last record of the present display list, still making
some very visual disturbment!
Any workrout around..? Any help!
Thanks,
ASB

You need to define your datagrid columns with the dateField
property appropriately set. Also, ArrayCollection is not something
that you use as a child of the DataGrid tag. Use the following
code, It works as per your requirement.
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml">
<mx:DataGrid width="500" dataProvider="{myarr}">
<mx:columns>
<mx:DataGridColumn dataField="id"/>
<mx:DataGridColumn dataField="name"/>
</mx:columns>
</mx:DataGrid>
<mx:ArrayCollection id="myarr">
<mx:Object>
<mx:id>123456789123456789</mx:id>
<mx:name>Peter</mx:name>
</mx:Object>
<mx:Object>
<mx:id>123456789012345678</mx:id>
<mx:name>Kristina</mx:name>
</mx:Object>
</mx:ArrayCollection>
</mx:Application>
Thanks
Harish

Presenter Display Options Are Missing in Keynote 6?

I upgraded to Mavericks / Keynote 6 yesterday.
I have a dual monitor setup on my iMac27, and today when I'm trying to play a keynote presentation, it displays on the wrong monitor.
I seem to be unable to switch it to my primary monitor, because the "Presenter Display Options" tab (under preferences) that was present in the previous version is alltogether missing.
Anyone else have this issue, and a work-around?
Where are the "Presenter Display Options"?
Thanks, JB

Hi, everyone.
I, too, have encountered the same problem the first time I fired up Keynote to an external projector. After trying out all the suggestions posted here, I stumbled upon a simple remedy.
1. Ensure that the "Enable Presenter Display" checkbox is ticked under the "Slideshow" preferences tab of Keynote. I believe this is enabled by default.
2. Then right click the "Keynote" icon at the dock, and under "Options," assign to "None" or "All Desktops."
I found that this enabled Keynote to present my slides in the exact same way as the previous Keynote version did. Whether assigning it to "None" or "All Desktops" makes any difference or not, I cannot tell, but both options work. I hope this helps.

Graphics display problems (dialog boxes) Lenovo G50 AMD A6 Win 8.1

Graphics display problems Lenovo G50 AMD A6 Win 8.1 Greetings to all. After having spent a number of days trying to find a solution to a display problem, I turn to this forum for help. I own a Lenovo G50 AMD A6 Win 8.1 ever since November 2014, and have had display problems ever since the first day, be it while using internet (Firefox or Explorer) or various software (Text editors, etc.). Many dialog boxes, including colour settings and controls (open, close etc.) either have an inappropriate appearance or even do not appear at all! I manage to "click" on the right places using memory: most areas are INVISIBLE! Another example would be that I do not see any backround colour or image on most webpages such as this one).  Some suggestions included checking for graphics updates (but the drivers used were already up-to-date).  I 'd be most obliged for any new suggestions. Thank you very much. George

Greetings to all, I finally decided to express my utmost discontent with- the Lenovo G50-45 I bought before Christmas 2014,- the summary response with inappropriate links that I received after exposing my problem- the fact that I tried to dowload the following graphics driver  (Beema) AMD Driver (VGA, HDAudio, SATA) for Windows 8.1 (64-bit)
exe
526 MB
Windows 8.1 (64-bit)
VGA V14.502.1002.1002-Logo'd_HDAudio v9.0.0.9905_SATA v1.3.1.220;VGA v13.302.1601.1001_HDAudio v9.0.0.9905_SATA v1.3.1.220
3/19/2015from here(http://support.lenovo.com/fr/fr/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-45-notebook-lenovo/downloads/DS100174), and after REFUSING to accept cookies and some "Lenovo Service Bridge", finally managed to obtain something HERE(http://www.notebookcheck.net/Lenovo-IdeaPad-G50-45-Notebook-Review-Update.125641.0.html).  I find it quite disrespectful to NOT provide customers with EASY support, as well as avoiding to answer their requests for further help when some simplistic "assistance" that one can find almost anywhere on the web leads to no further solution. I shall not repeat the problems I have faced till now: vide supra. The problem, however, is NOT just with browsers.I simply cannot see any dialog box content and colour in MANY software programs, such as OPEN OFFICE; for instance: PRESENTATION colour dialog boxes show BLANK squares instead of squares filled with different colours. This has occured AVER SINCE DAY ONE! Finally, a new bug has appeared: Windows 8.1 keeps popping up some email program to which I am invited to register - I never created a Windows email account, and certainly don't intend to do so.NOR shall I accept some "Lenovo Service Bridge", however "discreet and inoffensive" it might be. I don't know if there are any legal grounds for customers to complain for all these problems. I DO know, however, that I shall NEVER buy a LENOVO device ever again. The pricing and processor might be competitive => yet, the support that ensues is, as far as I'm concerned, LAMENTABLE. To make a presentation, I have to switch to a Samsung R20 using XP..... What is the meaning of all this? George

Presenter preloading problems

Wow, this forum is hidden really well!
Anyway, I've got a bit of a pickle here that hopefully someone can help me out with.
I just finished up a project in Flash that we want to imbed on separate frames of the presentation, which seems to have gone fine. The problem that we're coming across is that, for some reason, despite the individual swf files being less than 500K apiece, users are having buffering problems while viewing the presentation.
I'm looking for a way for the swf files to be preloaded by the presentation, rather than be loaded as the user gets to the slide the swf is present on. There is a toggle to preload all of the frames, which we have switched on, but that doesn't seem to load the imbedded swfs.
I'm somewhat desperate at this point. I fully realize that Captivate can do the job for me, but my company wasn't willing to go away from the program it is comfortable with...sigh...
Anyway, any help anyone can think of would be hugely appreciated.

Check this:
In the Keynote Preferences > Presenter Display menu, there is a button labeled: "Edit Presenter Layout" Click on this and when the Presenter Display appears, there will be another menu with a checkbox for: Current Slide, Next Slide, Notes, etc. Be sure that the "Next Slide" box is checked.
While you are at it, while in the Presenter Display menu, check the box "Ready to Advance Indicator." This will put a bar across the top of your presenter display; when it is RED, a Build is in process and you must wait for it to complete before you can do anything else; when it is GREEN, you are good-to-go with your next operation.
Good luck.

Timeline Display problem

I am stumped and so is everyone I know. I have several clips that do not work properly once I place them onto the timeline.
The audio plays fine but the video doesn't. All it shows is a single frame. The footage works fine in the Viewer but not in Canvass once i have placed it into the timeline. It seems to be a problem with _only a few of the clips._ Most of them work just fine. The video plays in the timeline for a while but once it comes to a cut where the source comes from one of these clips it shows only a single frame.
Here is the kicker. The frame that is shown is always from a different clip. Never from the actual source.
I know this is a display problem because I have tried Exporting the timeline with a few of these glitches present and the cut comes out just fine. That is a comforting thought but I do need to see what I am working on.
Please, please help me. Is there a setting i need to change to either the clip or the Canvass? Is this a hardware problem? Am I being a complete amateur? Please help.

I was hoping that wouldn't be what you would say but I was beginning to think the clips were exported wrong. Thanks. Sorry for the double posting. I was having trouble finding this original post. I thought it had been deleted. It has happened before. Not on Apple.com but elsewhere.

My new MacBook Pro has display problems

I am new to Mac. I had purchased a brand new MacBook Pro 13 inches with i7 processor on April2 this year, Within 10 days the display screen started to grey out and later on develop horizontal lines. I telephoned Apple support and when a telephonic solution became unlikely I was asked to take it to an Apple Authorized service centre in my town. The technician there could not clearly explain to me what was wrong with the system, but I understood him to say that he has reinstalled the graphics driver and the system was trouble free for a prolonged time thereafter (at the service centre). I also understood him to say that should the problem recur again, he would have to replace the motherboard. I was on a travelling tour for a week after this and was not able to test out this repair (I took my old windows system with me for the travel) To my utter dismay the problem has recurred again after 28 days of purchase. I have attached screenshots. The button for uploaing videos is greyed out therefore I will have to restrict myself to screenshots. All the three screen images occcur
in turn and the system becomes unusable and I have to use the poweroff button. The display problems start within 10 minutes of switiching on the system.
I took some time to discover these forums. The first time this problem occurred on my machin I posted this problem on mac-forums and I was advised to take it to an Apple store and let the apple genius bar worry about this one. I do not live wihtin any sort of manageable distance from such a place and the repair centre is an Apple Authorized Service Provider
Coming to the emotional aspects of this technological glitch. I feel like I have been hit by a truck.I had saved and scraped pennies to buy this dream machine and I believed I was escaping the ficleness of windows. But no windows system of mine (I have three) become so unusable
Will I have to spend time and effort to lug this machine to service centre to replace each of its component parts one by one ? Can I ever trust this machine to provide a presentation to an audience? What sort of an impression will I create if the system plays this trick on me in the middle of some presentation?

Shootis007, What is CC company? I googled CC and got many different answers.
I called Apple Support and told them my story and pressed for replacement and they told me repeatedly that there is no policy for replacement. The initial support person who attended my call asked me to take it to the seller and ask the seller for replacement. I dont think that is the way to go. I dont know what is his fault. He gave me a brand new system, the package was opened by me. Since I am new to Mac, I had taken a Mac user friend with me who showed me how to get started (right there in the shop) Neither the experienced Mac user friend nor I felt anything remiss at that time or later at the Seller level. Nevertheless I called the reseller and he explained his helplessness. I dont think it his fault at all.
Since I kept insisting on replacment I was put through to another support person who took pains to reassure me that I should get the defective part replaced and thereafter all will be well. For now I trust him. I have no other alternative
I really am puzzled. All you dear Mac users should know that the machine I dreamed of and really saved to purchase is giving me no end of troubles whereas my three windows machines sit there with their numerous stated deficiencies but gives me uninterrupted service

How to fix jaggy font display problem?

I upgraded to Snow Leopard from Leopard a few days ago and have been having font display problems ever since.
When I first upgraded, everything seemed fine, but then Word wouldn't display Arial. So, I validated fonts in Font Book and discovered a bunch of dupes. When I deactivated the dupes, that problem was resolved. But, a new problem occurred. Many of the fonts throughout various applications (Mail, Safari, Finder) appeared jaggy.
I tried playing with text smoothing and LCD font smoothing, but neither seemed to have much, if any, effect.
Then, I decided that I hadn't had a good font cleanup for several years, and maybe all the dupes and other detritus were part of the problem. So, I literally deleted all my fonts from system/library, root/library and user/library (I copied some into a .zip archive for safe keeping) and reinstalled Snow Leopard and all current updates. Then, I fixed permissions twice (though there are always permissions that won't fix) and booted into single user and did an fsck.
But, after all that, my jaggy problem still persists
It's really strange in that it appears worse at some times. And, doesn't seem to be present in all apps. Here's a screenshot from YouTube with Safari on the left (bad jaggies) and Chrome on the right (no jaggies).
I'd really appreciate some help. Any ideas?

Start with something relatively simple, like clearing the font cache files.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.
This does not clear the font cache files for Word (Office), which keeps its own such items.
Close all Office applications. Remove the following files. The tilde (~) indicates your home account.
~/Library/Caches/com.microsoft.browserfont.cache
~/Library/Preferences/Microsoft/Office Font Cache (11)
For Office 2008, the location of the second item is:
~/Library/Preferences/Microsoft/Office 2008/Office Font Cache (12)
For Office 2011, the location is:
~/Library/Preferences/Microsoft/Office 2011/Office Font Cache

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Presenter Display Problem

Similar Messages

Maybe you are looking for