Presenter Does Not Update to 8.1

I have a subscription to eLearning Suite, but my Adobe Presenter has not updated to version 8.1. It is currently 8.0.1 Build 260. I am using Windows 7 Professional. How do I get the update please?

8.0.1 is the current version. 8.0.2 can be applied, but I believe it is only for the Adobe Presenter Video Creator, and doesn't show on the About Presenter dialog.
More information can be found here: http://helpx.adobe.com/presenter.html

Similar Messages

Presenter Display does not update current slide or run timer ...

Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!

Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio.

Keynote on ipad stay updating presentations does not end

I am running keynote , the upatde of presentations does not end, if tray upload 15 mb presentation show error can not completed

This is the discussion for Mac, you should post your issue in the iOS forum where users of the iPad can help:
Keynote for iOS

The tab bar in Safari does not update automatically

Hello,
I have a strange problem with Safari full screen mode and the tab bar always displayed, it does "not update" alone. In fact when I, for example, two tabs and I created a third (by clicking a link) it does not appear immediately. I have to either click on the tab bar and pretend to move one, either click the "Naviagtion tabs" for bar tabs emtte update.
A little heavy, huh?
All my software are up to date and even reinstalled recently, but the problem is still present.
OS X Lion Mountain / / Safari 6.0.2
Regards

I solved the problem by uninstalling Glims.

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

HT2513 The date on my dock does not update automatically ? - Ps anybody.

I use MACCBOOK PRO with OS X ver 10.6.8.
I Cal Version 4.0.4 (1395.7)
Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
I would appreciate if someone has a solution.

I solved the problem by uninstalling Glims.

Mobile.me Calendar does not update/sync on iPhone

Since I did my upgrade to the new version of Mobile.me Calendar (as requested by Apple!), my iPhone no longer shows entries that I have typed into the Mobile.me Calender website. I no longer use iCal because Apple said it would not work with the new version of Calendar on Mobile.me, so I did the upgrade to stay in sync with calendars on my mobile.me site and iPhone, but the iPhone does not update. I deleted my calendar entries on my iPhone hoping that the Mobile.me would re-sync the data, but that didn't happen either. Here is my info:
iPhone version 3.1.3(7E18) Model MA712LL (first original iPhone)
What else can I tell you to help me please?

Please always post your System details when you have a question. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
http://support.apple.com/kb/TS3397
Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
http://support.apple.com/kb/HT4330
Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

Manual sync to ITunes does not update music

I have a generation 3 (I think--it looks like the model number is A1318) IPOD Touch running version 4.1 operating system. I have ITunes version 12.0.1.26.
It does not automatically sync. When I select manual sync, it appears to go through the process and indicates that it has completed the sync, but nothing has changed. It does not update the IPOD with new songs from my library.
Any help would be appreciated. For example are thees operating systems compatible? If they are what am I doing wrong.
Thanks
Ron

Try backing up to iTunes and restore from backup
iOS: Back up and restore your iOS device with iCloud or iTunes
Note that ll the synced media like apps and music have to be on the computer since they are not included in the backup

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

Yahoo finance portfolio does not update in firefox but is fine in Chrome and IE9

This problem did not exist under the previous version of Firefox. One can access Yahoo finance my portfolio ok but even with streaming quotes on the portfolio does not update.
Problem now solved. It was an issue of the Kaspersky root kit certificate

I don't know if it matters, try this url instead, which is a secured one (https):
https://twitter.com/

Application Compatibility does not update the database.

Hi,
I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
Any Help would be appreciated.
Thanks
Rakesh Patel
rakesh patel

Hi Rakesh,
I am not sure if you have resloved your issue.
But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
If you would like further assistance, please post back and we will be always here to help you.
Any concern about this mark behavior, you can just unmark it.
Thanks for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

Presenter Does Not Update to 8.1

Similar Messages

Maybe you are looking for