Presenter Video Creator (v8)

Opened a project. Changed branding to custom. Specifice just a starting branding element. Published, closed, went to EOJ.
Opened a different project. Can't change branding to end--all check boxes grayed. Can't specify a new custom branding theme. Can select standard branding but it still only shows up in the beginning, can't change to end (or background).Also, now it only uses the custom branding I created and used for the beginning of the other project.
Is there a cache that must be cleared?
Thanks. --Michael

Hi MichaelD443,
I followed your steps:-
opened a project
changed branding to custom
specified a starting branding video
published
clicked on close project button
opened a new project.
goto themes.
Can select any default themes or change the starting/end video.
In my case the themes dropdown is enabled and is working fine on my system.
Are the steps same as yours?
If the steps are same, then it's a system specific issue.
You can send us([email protected]) the diagnostic log with steps mentioned to reproduce the issue.
There is workaround to get ride of your issue. Close Video Creator. Delete preferences.xml file from this location -> C:\Users\<username>\AppData\Local\Adobe\Presenter Video Creator 8.1\ . Open VC
Thanks,
Vikram
Adobe Presenter Engg. Team

Similar Messages

What font is used in the "video title text" in Adobe Presenter Video Creator? I need to replicate it

What font is used in the "video title text" in Adobe Presenter Video Creator? I need to replicate it.

I just noticed, Hah! That it is the same font as used in the text on this page. Anyone know what it is?

Mouse problem in Adobe Presenter Video Creator

I have Adobe Presenter 9.0.2 build 173, 64-bit and I seem to have a strange thing going on in Adobe Presenter Video Creator when I use it to do screen recording to demonstrate software.
If I allow it to change my screen resolution as recommended by the application - 'change display Resolution during recording (Recommended)' - the mouse click occurrences recorded in the video occur a small distance away from where I actually clicked the mouse. So say I'm demonstrating the Ribbon in Microsoft Word 2013. If I click on the 'Home' tab on the ribbon, the video makes it look like I'm clicking on the 'Insert' tab just to the right of it.
However, if I uncheck the box 'change display Resolution during recording (Recommended)', the moue clicks in the recorded video are in exactly the correct positions. I would be happy to record in this mode but the trouble is the fonts and pixels are not as clear when I record in this way with the display resolution box unchecked as when I record with the box checked.
I'd like to know how to let Adobe Presenter Video Creator record at the recommended display resolution and have mouse clicks recorded correctly in the correct locations.
Any ideas anyone? Thank you.
Peter
(N Wales, UK)

Problem SOLVED!
On a hunch, I searched for DPI via the search function in the Windows 8 charms bar and opened the item 'make text and other items larger or smaller'. Under the heading 'Change the size of all items', I found that the slider was set exactly halfway between 'Smaller' and 'Larger' and below this, there was a checkbox titled 'Let me choose the scaling level for all my displays' which was unchecked. I put a check mark in the box and changed the scaling from the existing 'Medium - 125%' to 'Smaller - 100%'. Windows told me I had to reboot the PC to make the changes take effect. On rebooting, my desktop icons were smaller than before, confirmation that the change of DPI had taken effect.
I then made a video test with Adobe Presenter Video Creator with the 'Recording Preferences' setting 'change display resolution during Recording (recommended)' checked and to my satisfaction, ouse clicks no longer appear offset any more. And video quality in the published video looks great.
I'm happy!
Peter
(N Wales, UK)

Presenter Video Creator - More Themes

H ithere
I'm running Presenter Video Creator and when I click the Branding icon to show the Branding panel there is a drop-down for Themes. I click the drop-down and there are a couple of themes present, but there is also an option for More Themes. Choosing this option causes a zip file to be downloaded. I downloaded the zip and extracted it to a folder. After extracting, there appears to be a Setup program to hopefully install the additional content. But the problem is, running Setup causes the following error:
I've tried more than once thinking that perhaps the download file was corrupted or something.
advTHANKSance for any insight! Rick

Thanks Vikram
I'd love to report that your instructions fixed the issue, but nothing changed.
So I did more digging. I ended up having to open WinZip to extract the contents. And there is an option in WinZip that says to recreate the folder structure used. And that was the missing key. There are some folders involved that weren't getting created.
Cheers... Rick

Adobe Presenter Video Creator

Can I download just the Adober Presenter Video Creator, an license that separately for my subject matter experts?

Hello,
Adobe Presenter Video Creator comes as a part of Presenter 9 only. You will have to license entire Presenter 9. You can think of trying the subscription option of Presenter 9.
Also if your SMEs have access to Mac machines, then you may want to download and install "Adobe Presenter Video Express" from the App Store. It is the Mac equivalent of Adobe Presenter Video Creator.
Hope this helps.
Regards,
Mukul
Adobe Presenter Engg. Team.

Adobe Presenter Video Creator for MAC Price Change???

Just two to three months ago, Adobe Presenter Video Creator was free for the MAC with a $2 publishing charge. Has this changed?

Hi There,
After the release of Adobe Presenter 10 the Video Express for Mac is now chargable and is not available for free anymore. It will cost you 249 USD per license .
Regards,
Mayank

OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

Presenter Video Creator - Themes

Does anyone know where the Themes are stored for Presenter Video Creator?
Thanks... Rick

Hi Rick,
If you mean branding videos, they are stored at this location for win7 -> C:\Users\Public\Documents\Adobe\Presenter Assets\VideoCreator\branding\videos
There are 2 folders both for hd and sd branding videos.

Adobe Presenter 8 Video Creator crashes when publishing

After capturing a video and demonstration using Presenter Video Creator, I am able to edit the video, choose whether I show talking head, demo, or both. The program seems to record everything as I would expect. However, when I attempt to publish, it goes to 5% and then gives me this error: "Application encountered an internal error." It does not matter if I try to publish to my computer, adobe connect, or anything else. I see so many great possibilities for this product, but if I can't publish, then it is completely useless to me. Does anyone have a fix for this?
Adobe Presenter Video Creator version: 8.0.1.260, 64-bit
Thanks,
JJ

Are you getting the internal error during publishing? or is there any other issue with the Video creator.
Can you explain the whole process at which you are getting the internal error?
The latest graphics driver provided by Intel is of version (6.14.10.5437) dated 2/13/2013.
Did you downloaded and installed the driver by traversing through this link http://www.intel.com/support/oems.htm
Did it throw any error while installing the driver?
Please mention your system name and identification number, i'll check whether your system manufacturer is providing any new updates for your graphics driver.
Also mention the name of the camera you used for recording.
Please make sure you are following the below checklist for recording any new video.
This is a general checklist that should be followed before using Video Creator.
Are your video card driver is up to date? Please check whether you have the latest driver from the manufacturer’s site.
Are all unnecessary applications closed?
Do you have sufficient free space on your hard disk? At least 5 GB is needed, but around 15 GB is recommended.
Are your webcam drivers up to date? It is recommended to install the webcam driver from the webcam cd or the webcam company’s site.
Are you capturing your video in a well-lit environment? Most webcams perform poorly in bad lighting.

I need help in using Presenter 9 Video Creator

I'm struggling to get started with Adobe Presenter 9 Video Creator.
I need detailed, step-by-step instructions but the information that I have been able to find is far too sketchy. I have looked in the "Presenter Help and Tutorials" and I have looked at several video tutorials on You Tube but none of them given me the detail that I need.
If anyone can help directly or can point me to good sources of information, please let me know.
With thanks,
Gerry

Many thanks for this. It helps a bit but what I'm needing is a proper manual with details of how things are done, possible snags and how to deal with them.
I have now had a bit of help from someone from Adobe and I may now be able to get round the things that were holding me up.
Thanks again.
Gerry

Presenter video recording from PowerPoint has stopped working

My Adobe Presenter 9.02 Build 173 has suddenly developed a problem where recording video from within PowerPoint has stopped working. I have Office 2013 32-bit and Windows 8.1 64 bit. I believe that Presenter installed itself automatically in the installation process as a 64-bit application.
When I press the 'record now' icon on the Presenter toolbar, PowerPoint opens the current displayed in Slide Show view and I get the following error message:-
"Adobe presenter has encountered unexpected problem while working with this presentation......" etc.
This video recording feature from within PowerPoint has worked just fine on my system with the identical setup as mentioned in my opening paragraph but it's suddenly stopped working for some reason? I checked and do have the latest graphics driver.
The stand - alone video creator tool records video outside of PowerPoint just fine but as stated, I can’t execute recording from the ‘record’ icon on the Presenter menu in PowerPoint.
I tried the following without success:-
I created a new PowerPoint file and tried to repeat the recording process
I ran PowerPoint as Administrator and ran the file ‘Adobe-Pr-VC.exe’ (in C:\Program Files\Adobe) as Administrator
I uninstalled and re-installed Presenter
I turned off my AV software and firewall
I created a new Windows Administrator account and tried video recording within PowerPoint
Anyone have any ideas on what else I could try?
Peter

Solved! In the end, the solution was simple!
I went to the PowerPoint 2013 ribbon and clicked on 'Slide Show' and unchecked 'Use Presenter View' and video recording from within PowerPoint immediately started working fine. Previously, the 'Use Presenter View' box had a check mark in it. When you click on the record video button in Presenter, PowerPoint goes into slide show view and clearly Presenter doesn't like PowerPoint opening the Slide Show view in Presenter view.
I picked up on this from another PC I have with PowerPoint 2013 and Adobe Presenter 9. The video recording feature worked every time on that PC and I noticed that the only difference was that the newer PC had a check mark next to 'Use Presenter View' where as the older PC setup didn't.
So everything is working well now!

Can't download Adobe Presenter 9 and Presenter Video Express for Mac

Hi, I am from Russia.
I need either Adobe Presenter 9 or Adobe Presenter Video Express for Macbook.
I cannot download either of them, because when I try to open "Adobe Presenter" "Adobe Presenter / Buy now" or "Try now", the page says:
Error processing your request
We're sorry, we encountered an error processing your request.
(http://www.adobe.com/cfusion/tdrc/index.cfm?product=presenter&loc=en_us&promoid=DJDVG)
As for the Video Express, the link leads to iTunes and the program says that the product is not available for my country...
I use Macair (I cannot insert discs). I am already used to downloading from the internet and paying with my credit card... but can you give me the links?

Adobe Presenter is a Windows application, so being able to download it may be irrelevant. The link you provided works for me, but again, I think you may need the Adobe Presenter Video Express tool, as that is the Mac application (and it's free). You should be able to get it from the Mac store, https://itunes.apple.com/us/app/adobe-presenter-video-express/id593844338?ls=1&mt=12.
Ah, I just caught that you are in Russia, not sure about the Video Express tool being available there, you may need to call Adobe and see what the avalablity is.
Message was edited by: Jorma Jennings

Pinnacle dazzle digital video creator 90

Someone just gave me this to put videos from my HI8 video camera onto iMovie 6 and iMovie can't recognize the camera when it's pluged in. It's called pinnacle dazzle digital video creator 90. I'm not sure if it's because it uses USB or what. If its because it dosn't work on mac, I have virtual pc. Is there any way I can put it on there and then transfer it onto my mac?
Any help would be appreciated.

Yes, if it can only transfer via USB then it can't, if you see what I mean.
You need firewire to do this, and an analogue to digital converter, such as, for example, the Canopus ADVC 110.

Dazzle Video Creator Platinum HD for Mac

I have just purchased Dazzle Video Creator Platinum HD after being advised to get it by a staff member at an Apple shop. When it was delivered it states on the pack it is only compatible with Windows 7, Windows Vista and Windows XP. I don't have parallels on my mac and was hoping I could load dazzle without purchasing parallels and windows. I dont want to unpack Dazzle and try as I may not get a refund. Can you advise if Dazzle is compatible with Mac OSX 10.6.3 and if not what I should do to be able to use Dazzle on my MAC?
Thanks

Well, your MacBook Pro should have iMovie already installed, and that along with an analog to digital convertor is all you really need.
If you get yourself a Digital8 camcorder (I have a Sony one) you can connect the "iLink port" to your MacBook Pro with a FireWire cable, and then iMove can connect to the camera and even control the tape playback/pause options. I have done this myself a few times. When I first started converting some old "out of print" VHS tapes to DVD for my wife's classes many years ago, I purchased the Pinnacle MovieBox DV which was my analog-to-digital convertor. In fact, this old box still works today other than it only works in SD (no HD here). The Movie Box DV that I have is hard to find now, and it is no longer officially supported, but they are very solidly built and seem to last forever if you can get one. I had to go the route of the external hardware for convertign the old VHS tapes due their having MacroVision encoding on them, and the hardware I bought will ignore that.

Downloading adobe presenter video from web

Hi everyone.I am trying to download adobe presenter video at
the address:
http://forexforums.dailyfx.com/trade-like-professional/68958-trade-like-professional-dj.ht ml
But I cant.I tried almost all flash video downloader programs
but they didnt work.Is it possible to download adobe presenter
videos from a web page.
Thanks.

HM, you may need to try re-creating the hyperlinks, and see if that helps. It may come down to a process of elimination of objects on the slide to figure out why the links don't work.
For video converters, you can look at using the Adobe Media Encoder. You should be able to use version 6 without a CC membership, not sure about version 7. Adobe - Adobe Media Encoder : For Windows. Otherwise, you might want to try handbreak, as it is free. If you like Movavi, then that seems like a reasonable option, I personally like using AVS, and it is priced similar to Movavi.
Presenter should be able to convert your MOV to FLV as well, though you don't have much control over most of the settings in the conversion process. You can import FLV or MP4 without Presenter doing any conversions. Other formats that Presenter will take will be converted to FLV.

Presenter Video Creator (v8)

Similar Messages

Maybe you are looking for