Presenter View During Live Events In Show and Share

Hi,
I am a bit confused about the user authorisation during live events of Show and Share. There is a user who is creating the event and publishing it. I think this user should be the moderator. He can see the questions tab and check the questions coming from the other participants and send them to the presenter view tab.
I have found some information about the moderator and presenter in the user guide for show and share but I could not find out which user can be a presenter, or are the presenter and the moderator the same user or not.
Below is from user guide:
The live event moderator pre-screens these incoming questions and comments as they arrive. Moderators can:
• Move any high-priority questions to the Presenter’s View tab. • Move any low-priority questions to the Removed Questions tab, either manually or automatically by keyword. • Use keyword filters to see and manage only the messages that match those keywords.
. The presenter then responds to any number of these pre-screened questions and comments. (These are messages that the moderator moved to the Presenter’s View tab.)
From the above information, it seems that there are seperate presenter and moderator, but is there a way to assign a user other than moderator only the presenter rights?

Great question, Ken!  I too would like to know if there is a way to transfer video content management to an other author.  In the case that a user publishes content and later leaves the company, retaining control of the published material is a requirement.

Similar Messages

  • Show and share & live event module problem

    Hello everyone
           recently i've installed cisco show and share , also with live event module..    I need to run live event without DME(digital media encoder), i need to run "NON-Dme live event"  .
          simply i need to attach my web cam to my live streaming event? is it possible?
      There is a field "Video URL" but i dont know exactly how to  use it..
    thanks advanced

    Hi Temur,
    It's true that the Show and Share only supports either WMV or Flash streams as input. Therefore, you need to make sure that the camera you are using has that capability.
    Unfortunately, I cannot tell you of any camera that works directly, because I don't know of any. Normally, for our lab tests, we use either a DME or a Windows Media server to generate the live streams.
    Anyway, I would recommend you to have a look at the link below for a list of the supported bitrates and video dimensions.
    Regards
    Daniel

  • Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

    Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231. 
    We restart the excel service app and it solves. Looking for permanent solution.
    Regards,
    Kunal

    To resolved the issue do a simple restart. 
    Restart the server
    Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
    If the problem occurs often, restart the server running Excel Services Application.
    If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
    Here's the article with the explanation: Error communicating with Excel Services
    Application - Events 5231 5239 5240
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Show and Share Automatically Assign Permissions

    I have been looking and cannot find a whole lot on SnS permissions.  Our DMS is version 5.3.11 and we are using embedded authentication.  We have a setup so when a user connects to the TCS(5.3) to record a video it then automatically sends it to our MXE3500(3.3.2.0) then from there it automatically distributes it to our Show and Share and assigns it a category based on what address was dialed.
    What we want to do is have group and or user permissions assigned to the categories so only those users can see the videos.  Does anyone know if this is possible?
    Thanks for any help!
    -Scott                 

    Hi
    Integration with Active Directory :Cisco Digital Media Manager 5.3 provides integration with Microsoft Active Directory
    via the LDAP protocol to import both names and groups from Active Directory. Cisco Digital Media Manager and Show and Share users are then authenticated against MS  Active Directory during the login process. By categorizing the uses into different user group within DMM, administrator can control and manage the content viewing permission within Show and Share by associating the user group to the video during the publishing stage. There are three Authentication Mechanism available: ‘Embedded Authentication’, ‘LDAP Authentication’ and ‘Federation Authentication’ .Currently, Microsofts Active Directory is the only LDAP service that is supported. You have to choose LDAP Authentication , as the attached photo
    Thank you
    please rate all useful information

  • Show and Share API : Uploading a video to a particular user group

    Hi,
    I am trying to find a API spec for uplaoading a vide in Show and Share portal for a specific user group. But could not find such thing as usergroup, but just the Content Viewership is available where we need to input all the ____USERNAME____ to upload with access to the users rather than a user group.
    I would like to know if anyone can direct me to upload to specific usergroup rather than user.
    Thanks in Advnace,
    JK

    Jeffrey,
    What is the content format of the ORIGINAL source comment?
    - download MEDIAINFO video analysis program from the web.
      http://mediainfo.sourceforge.net/en
    - After installed, file->open-> pick your source file with issue.
    - change the view to TEXT and copy\paste the results into a
      TEXT file and upload here.
    From the MXE, highlight the SnS-MXE job and right click and
    open the JOB XML.  Same thing save the XML code in a text
    file and upload here
    Sidenote:  did you download the DMSprofile.zip file from the web
    and install the DMS profiles in the profile directory?
    Thanks
    T.

  • DMM and Show and Share: System Requirement

    Hi
    I want to install DMM and SnS for a test environement (vmware), but i can't find the system requirements for both servers, i know that is a Hardware only Server supported and a preinstalled plateforme.

    Hi Youssef;
    Maybe this will help;
    There is a DMS sub-forum here
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/digital-media-system?view=discussions
    Cisco Digital Media Manager 5.4 Virtual Machine
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_C78-722975.html
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dmm/vm/dmm54x_vm.html
    Cisco Show and Share
    System Requirements
    Cisco  Show and Share is available for purchase on two different supporting  server appliances. All of the required operating system software,  required configuration, and Cisco Show and Share applications are  shipped to customers preinstalled on the server appliance they choose.  Cisco Show and Share is not available for purchase as a standalone  application.
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-565776_ps6682_Products_Data_Sheet.html
    Cheers!
    Rob
    "When it comes to luck you make your own  " 
    - Springsteen

  • Uploading YouTube videos/urls into Cisco Show and Share

    We've just purchased the DMM 5.2 and the Show and Share appliance to host internal company videos but there are some YouTube videos out there that we want to pull into our Show and Share system as well. How can we do this? I've tried every possible combination of youtube url and embedded url that is out there, at least nothing that I've tried has worked thus far. I'm able to pull in other internal URLs of different videos (wmv format) without any trouble. Is this an issue with YouTube or perhaps with flv formatted video that YouTube uses (which should work according to the manual).
    I know this is a new product, but is there anyone that can help?
    Thank you in advance,
    Chris

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • Can't set File Hosting Locations on Show and Share

    Hi,
         I'm currently using Show and Share 5.2. I have it peered with the DMM and everything for the most part seems to be working fine. The problem that I'm having is that I can't seem to set and save the File Hosting Locations. I set it to store locally and it shows a valid password, but it will not save the setings. I've tried this in multiple browser: the latest firefox and IE. Any ideas?

    Are you using the Actual Appliances or are you testing with VMware images?
    Please gather and upload the following screenshots:
    * Go to the AAI interfaces for BOTH the DMM & the SnS.  Please provide a screen capture
      of the Pairing status screens for each appliance.
    * Go to the DMM --> Admin Module and get a screenshot of the services for the DMM & the SnS.
    Is there any error when trying to save settings?  Please provide the screen shot
    of that..
    Thanks
    T.

  • Uploading Youtube Vid. URL to Cisco Show and Share failed

    Uploading Youtube Vid. URL to Cisco SnS failed. I get error msg. : Connection to video server failed

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • Show and Share integration with MS SharePoint?

    Does Show and Share have any integration with Microsoft Share Point?  Customer is asking, I don't see anything.

    Dear
    yes of course you can , kindly cheeck the below datasheet and the integration will be through API
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-477948.html.
    There is other option i just read about it few days ago  smarthub ASE.
    Thank you
    please rate if this will help

  • How to get cisco show and share

    Hi,
        I have a DMM with version 5.2 and saw that on my licesing I have show and share. But how do I install show and share? Can I install it on DMM server?Do I need to install it in another server? Where can I download it? I think the show and share installation is called SS-5.2.0.20.iso, but I do not found it on cisco support download section.  

    Mario,
    Show and Share(SnS) is an Appliance just like your Digital Media Manager (DMM).
    You have to purchase the Appliance from Cisco or a Cisco Partner.  Then you have
    to purchase use licenses for Authors etc...   The Appliance software is not separate
    from the hardware and is not downloadable.
    Please contact your Cisco Sales Rep or Account for further explanation and they
    can assist you with your companies needs.
    Thanks!
    T.

  • RSS Feeds in Show and Share

    Hi all,
    We have deployed Show and Share in our enterprise, and Cisco DMM with DMP licenses.
    We would like to integrate the Show and Share updates using the RSS feeds, is it possible to disable the authentication requirement for the RSS feed?
    Thanks in advance.

    Mail in Mountain Lion no longer supports RSS feeds. You have to install an RSS feed reader, as the message suggested.
    Regarding the Messages question, see:
    http://www.mactrast.com/2012/08/how-to-fix-imessage-syncing-between-iphone-ipad- and-mac/

  • Dynamic languague selection on Show and Share site

    Hi all,
    I would like to change wich language is shown on "show and share" website based on web explorer local language preferences. It is documented that language can be fixed by Administrator and later changed by customer but does not say anything about other customizations.
    Does any body know if it is possible?
    Thanks in advanced!
    Alex

    Hi Alex,
    I'm afraid this is not possible. The language can ony be changed manually.
    Regards
    Daniel

  • External file hosting for Show and Share

    Hi,
    If I only use FTP server (no external streaming server) for external file hosting, can show and share still play the video? Is there any other limitation beside video editing with this scenario?
    Thanks.

    Hi
    1- If your upload your files locally on your SNS , SNS will be the origin server and will be responsible for "RTMP and HTTP". For External hosting files which is highly recommended by Cisco , you have to use external streaming server and Wowza server or Adobe flash server and this will allow all videos .flv , MP4 , WMV,,etc displayed and without streamin server the videos won't be displayed. I hope to take a look for the below :-
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/admin/guide/filehosts.html
    Thank you
    please rate all useful information

  • No Thumbnails In Show and Share

    I am running Cisco Show and Share 5.3 with a Wowza media server and am able to play videos fine, but the thumbnails are not showing up.  I can see the thumbnails in the draft but when I publish the video the thumbnails are not displayed.  I don't get any errors when I publish the video.

    Normally thumbnails are stored in the default hosting location (*.*).  If this points to the Wowza server make sure the virtural directory pointed to in SnS is setup properly.  This is created on the Wowza server.  This is done by going to Start/Administrative Tools/Internet Information Services (IIS) Manager. Click on the plus sign next to the server name and in front of Sites and right click on Default Web Sites to Add Virtual Directory. Name your virtual directory and use that name in the URL in the default hosting location.  When you define the virtual directory point the directory to the file location defind in the default hosting location.  You should see the thumbnails in this directory on the Wowza server.
    Let me know if you have any questions
    John

Maybe you are looking for

  • For the beginner: Make a DVD from DV

    KEYWORDS: Interlace, chop, streak, line, DVD, motion, action, mouse, teeth, blinds PURPOSE: Provide a condensed procedure to help the beginner easily convert his/her mini-DV camcorder video into a highest quality DVD using FCP, Compressor and DVDStud

  • App Store - Full screen preview.

    How do I view an app screenshot in full screen? I've just updated to ios 6. I noticed you could tap the screenshot for a larger view in the previews but when I tap nothing happens.

  • FM for Convert Date

    Hi I need to convert dates from user format to internal format. Does some body knows wich FM can i use for convert text field  '15.3.2010'   to  date field  '20100315'   ? Regards Frank

  • RunInstaller issue

    Dear All, I am working on Oracle 10g Installation both server and client. The platform is AIX v5.3 and need to automate the installation. In the script i need to run the runInstaller which gives a question "Has the rootpre.sh been run as root user?"

  • Problem with  invoking siebel service from  Prov ABCS

    Hi All, we are trying to invoke a Siebel service from Prov ABCS.and i add oracle/no_authentication_client_policy policy also .but i am unable to invoke siebel services .i trace proce flow in invoke activity throws below error: [Fault Recovery] Rethro