Presenter view won't display

So I made this fabulous keynote presentation to use in my classroom, and tried to use the presenter view so that I wouldn't forget what was coming up next (as I often do!).
I connected my macbook to both a TV and a projector, but both times when I played the presentation, my screen was the exact same as what was shown on the TV and from the projector.
Under presenter display preferences, I have checked:
-Use alternate display to view presenter information (I also tried it with this unchecked)
-show current slide, next slide, clock, time, and ready to advance indicator
What am I doing wrong? I have a feeling it's probably something very obvious where I'll smack my forehead after someone tells me. But seriously, I tried all morning and couldn't do it.
I'm running Leopard, but I would hope that isn't the problem.
Merci beaucoup!

Your OS X display preferences need to be set up for monitor spanning, and not monitor mirroring. In the System Preferences, in the Display pane, you can turn on this option.
(If Keynote were smart, when a presentation is set to use the Presenter Display it would recognize when spanning isn't turned on, and would give you a warning or some explanatory information.)

Similar Messages

CS4 Live View Won't Display External CSS

I have a simple .html file - all located on my local machine
with an external .css file located in the same folder as the .html
file. Everything displays fine in a browser. Live View won't
display items in my external css file. It displays items in the
inline file fine. If I move items from the external to the inline
file they will appear. Links are relative to the Document in the
site setup. No default images folder defined (images are in a
folder called "images").
I know it's something simple and dunderheaded. Just getting
back into html after a little hiatus. Any help greatly
appreciated.

> If this is a static site, ignore the Live View button.
> Test it in browsers using F12.
Live view will work fine in a static site, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C5713A99.31982A%[email protected]..
> suggestion-
>
> Make every line in the site defintion Correct.
> If not sure what it should be, ask.
>
>
> If you use site root relative paths, enable using temp
files in dw
> preferences->Preview in browser
>
> The link to the external css file is a site root
relative path.
> Change it to a document relative path
>
> There is a pulldown at the bottom of the "browse to
file" dialog box to
> choose linking method.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Manage Views - newly created view won't display

Hi All,
I was recently asked to create a portfolio view for a new senior project manager. I've done this before so I thought it would be fine. However, once I create the view and I go back in to the Poject Centre, the view won't display. It just shows
a grey page. I then deleted the view I created and duplicated an existing view (but just changed the filter so it showed the projects managed by the senior's directs) but even that won't display.
I don't understand why this has worked every time previously and not now. Any idea what it could be?
Thanks in advance for any help/advice.
Clair.

Hi Clair,
What does exactly happen? Can you see the view name in the view drop down menu?
In case you don't, there are 2 main things to validate:
Which type of view did you select? In order to be accessible from the project center, it has to be a project center view and not for example a project view. See screenshot below (unfortunately in french).
Did you correctly associated the appropriate security category with the view? Indeed, if project manager are in the default project manager security group that is associated to the "my projects" category, you need to associate the newly created
view with the "my projects" category.
In case you see the view in the dropdown list but when selecting it, nothing is diplayed, check for filters in the project center page or directly in the view configuration. Check also if the account you're connecting with has proper rights to access the
list of projects displayed by the view.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

VIEW won't display channels with same names

Hello,
We have recently installed DIAdem 2010 and are beginning to find channel name problems that we didn't have before with 9.1.
Traditionally we have always set the name-oriented channel references to 'only channel name' and we have never had any problems when displaying multiple traces in VIEW. Now, we find that when we display more than one trace in VIEW with channel names that are repeated we get problems with the axis system display dialogue box. This dialogue box tells me that the X and Y channel names AND NUMBERS are the same for all three traces when in fact the data displayed is different. If I try and change one of the channels it immediately reverts back to the first channel with that name.
I have attached a screen dump to help explain. The image shows a VIEW window with three speed time histories from three separate data files that have been loaded together. The three X channels will all be named 'time' but will be channel numbers 1, 4 and 7. The Y channnels are all 'speed km\h' and are numbered 2, 5 and 8. However, the dialogue box shows that all three traces are made from channels 1 and 2 despite the three traces appearing different. If I change one of the 'time' channels from number 1 to, say, number 4, then it reverts back to number 1 as soon as I move the focus to somewhere else in the box. Version 9.1 never had this problem.
If I swith the name-oriented channel references to '[group index]/channel name' then the problem goes away - even thought the data displayed in the graph is the same!
I'm not entirely clear on the reasons for settling on 'name only' references - probably historical - but I am even less clear on the effect of switching to '[group index]/channel name', particularly with the many autosequences that we use.
Is this a bug that can be fixed?
Regards, Si.
Attachments:
VIEW.jpg ‏236 KB

Simon,
The DataFinder is a database that DIAdem installs that integrates directly into the NAVIGATOR, so that you can easily query data files/groups/channels or compile properties from multiple files into correlated curves on a graph, etc. You might be interested in the ability to look inside your data files in the NAVIGATOR to see the group/channel structure and their properties. This is particularly interesting if you wan to load selected groups/channels from one or more files.
Here are the feature description files,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
New Features from DIAdem 9.1 to 2010.zip ‏69 KB

Canvas and viewer won't display video correctly

I have just reinstalled and then reinstalled 5.1.4. Picture plays on external video monitor but will not play in either canvas or viewer. RGB is set. Mirror on playback is set. Audio will play. Viewer will play on external monitor. Usually a still will be on viewer of canvas screen or just a jumbled mess. Sometimes with parts of display frame included in mess. Thanks for any help.

Thanks for posting helpful info re my problem. Issue finally resolved. FYI in case you should encounter a similar problem. I failed to mention in my post I was running two video displays. The video card I was running on when I developed the problem had been my auxilary display and was too underpowered to run the canvas and viewer. I inadvertaintly switched final cut pro to that card and monitor when my previous main monitor quit. I simultaneously had a drive boot problem. All is well that ends well, I suppose. Only took 4 days to sort it out and could find no info in tech manual that would have led me to this.

Column View won't display some images downloaded by browser

I have used the "Preview" in Column View to display images for some time and some images downloaded to folders will never display. The wheel just spins in the display area and CMD-i doesn't display the image either. If I open the image in the Preview application it displays! There is no detectable difference in the files that do and don't display in Col. View. I can get any image to show up by opening a graphic application and doing a "Save As" to reprocess the image and replace the balky one. But, this is not right that I should have to do this. I cannot determine whether a downloded image is going to have a problem or not as some from the same websites are OK sometimes and some are not. I had the problem with OS 10.2.8 too. Changing from iCab to Safari does not help.

ACK!!!! Cancel all that because it happens using Firefox too. I have NO IDEA what in the world is happening to my system that would cause web pages to load incompletely.
What a drag.

Simple table view won't display text after typed...

I'm working with a table view in my application. I already have the code in place and the object prompted to the right items. Though once I build and use the table view, I simply cannot have the text I added to the table be viewable after I click to add a new row. I can provide more infomation upon request, thank you.
Here's a snapshot of what I mean.
Before:
http://cl.ly/01250R0W3u3e3h2t163a
After
http://cl.ly/462q3G300w1c180s3q1W
- Tom Miller
Pixelogic Software
www.pxlc.me

More learning interactions (think you are speaking about a learning interaction, not a widget) only have a placeholder on the stage; to see the result you'll have to preview (in browser) and after publishing everything will be OK.
It is certainly not only the table interaction that has such a behavior, did you try out all the interactions?

Mail viewer won't display attached photos, "Missing Plug-in"

This is a brand new issue for me, after years and years of using Mail. Today I sent an email to a friend, and attached a jpg (exported from iPhoto). When I looked at that sent email in Sent folder, there's message "Missing Plug-in" in place of the image. Last time I sent an image was about a week ago, it worked correctly at that time. I'm very sure I haven't changed any Mail settings in the interim. Is this just a problem with the viewer, or a problem with Mail itself?

I've tried all the fixes listed in the discussions about missing plug-ins in Mail. None of them worked. I can see attachements in the emails, but when I forward them, the missing plug-in shows up in place of the attachments on the forwarded email. I'm running the latest OS 10.7 on my Mac Pro and I just downloaded the latest Java app. HELP!!

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. HELP!

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables. I am so frsutrated...it looks so silly not to have a computer work during a presentation..
Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top. Any ideas?
Thanks !

You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit.

DW8: image won't display in Design View

Folks:
DW8 on MacOS 10.4.8 (fully updated) on Intel iMac.
What would keep an image from displaying in DW Design View?
What are the causes of the grey box with the superimposed "X"? Is
there any diagnostic output that might help? Is the grey box and
"X" substituted by DW8 for an invalid or un-drawable graphic, or is
this done by the OS?
The problem:
I've got a 1912 x 1481 graphic, a geographic map, in AI that
I'm trying to use as an ordinary web image, but DW won't display it
in Design View. Instead all I see is a big grey box and "X". For
test purposes, I'm starting from a new "Basic" HTML web page and
all I'm doing is inserting this one image. I need to get this
working so I can draw hotspots on this graphic to make it
"clickable" .
Here's what I've tried:
o Triple-checking that the inserted image reference is
correct. Yes, the image file is correctly linked. With the image
selected, the inspector shows a tiny but recognizable miniature of
the expected image. Further, when the page and the image are
uploaded to the web server and I look at it via a browser, the
expected image is _always correctly displayed.
o Exporting the graphic "for the web" from AI as both a GIF
and a medium-quality JPG. Neither of these are displayed in Design
View; both are served up correctly after being uploaded
o I found a larger JPG on a different site I'm managing. This
always displays as expected in both DW Design View and when served
up. I substituted the failing map JPG image. The result: A grey
box.
o Checking the map images: The JPG and GIF versions seem to
be visible in all environments (image readers, browsers, etc.) I've
checked _except_ DW8 Design View.
o Checked on another system. I made the failing image
available to a very helpful ACE, who performed a similar
experiment. It worked fine for him. I used his exact HTML and
directory structure -- and it failed for me. Grey box with "X".
It seems to me that I've checked most of the obvious
possibilities. Now it is time to check the less obvious ones.
Suggestions are very welcome!
Thanks,
Henry

Randy:
Thanks for your response.
This is a virtual memory system, so -- in theory-- it should
accommodate anything that will fit on the hard drive, more or less,
if I'm wiling to wait the hours (days?) it will take to swap on and
off the disk. That assumes DW8 takes advantage of the capability.
It may not.
"Larger"? The JPG image I compared to is 1692 x 2160 pixels,
but weighs slightly less, 289K bytes. I'm losing track of all my
test images that fail, but a representative one is 1912 x 1481
pixels and weighs 332Kb on the disk. "Roughly comparable" might be
a better description. The point is still reasonable: DW8 does
handle images of this size on my system.
One issue that occurred to me recently is that I may have
caused some grief by monkeying with the "Save for web" settings at
the Illy export. Perhaps I asked for some configuration that's
normal for Illy to export --or it would have warned me, I hope--
but too strange for DW to grok. DW should complain more
informatively than painting a gray box and "X" when that happens, I
would think.
Henry

Dual Display using "Presenter View" as in MS PowerPoint

I have a T410 type 2522-A92 and want to present slides on a projector screen while on my laptop monitor I can see the slide and my notes. I have so fare been unsuccessful in doing this. Is my laptop model not equiped for this task and if so, is there any way I can put this right.
Solved!
Go to Solution.

Hi Kappelmeister,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you had trouble using extended display in your Lenovo ThinkPad T410.
For using PowerPoint in Presenter Mode, the extended desktop feature must be enabled for this mode to function. Press FN+F7 to switch to extended display mode.
In PowerPoint, go to the Slideshow menu and click "Set up show”.
Click on the Presenter Mode or Show Presenter View.
After doing this and starting the slide show, the slide will appear on the second monitor (the projection screen) and the laptop screen can be used to access something in private.
Refer here for further information on how to configure PowerPoint to use presenter view with two monitors.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sudden Change to Slide Show Display/Presenter View Greyed Out

Two weeks ago powerpoint was acting normally. I would come into class, hook my netbook up to the projector, set my monitor output option to extended desktop and start my slideshow in presenter view. This morning I went into class and I was unable to use
presenter view. It was greyed out. I had to clone the displays and wing it without my notes. Also, the slideshow itself *looked* different. There was an orange menu bar at the bottom that I could not get rid of. Has this happened to anyone else?

Hi Michelle,
Do you mean the "Use Presenter View" option under "SLIDE SHOW" tab on the ribbon is greyed out for you?
When you are in the "Slide Show" mode, please try to right click on the slide and see if you can select the "Show Presenter View" from the context menu.
Have you ever made any changes to your computer recently? You might want to try installing any required updates, including updating your graphic card driver to the latest version, then try again.
"There was an orange menu bar at the bottom..." - Is it possible to share a screenshot of it with us? You can send the file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Won't display odd page on right in two-up view

thanks in advance for reading this: I self publish several books of my own. Using InDesign CS3 I've exported them (for years, all the way back to Pagemaker) as a 'book' pdf and with ID's wonderful view pdf feature, I've been able to review them 'two-up' the way they would appear after printing. After CS3 for some reason, I can't get Acrobat to let me view them with the odd page, ie., the first page, starting on the right panel, the even on the left and so on.
At first I thought it was a page numbering or pagination issue from Indd, but....I've gone back to older pdf's in previous books and brought them up in Acrobat and the same thing now appears. Can't seem to find any reference to this in the online help or the local help files.
Any ideas? I'd be most appreciative....

Using Version 8.1.2
Goto VIEW
Then PAGE DISPLAY
Then select SHOW COVER PAGE DURING TWO UP
Seems to work for me, took a bit of hunting to find that, despite Adobe's online help telling me that multiple page documents will always display with the odds on the right to make sense of books!

SWF Won't Display in RoboHelp Project

Hi,
I have a RoboHelp 9 HTML project that has a number of SWF files embedded in a number of the pages. The problem is the SWF won't display on the HTML page. The SWF files are published to version 11.x. The HTML pages work fine on my computer but I have Robohelp and Flash Pro installed. When I take it to any other computer in my office, the HTML pages load with no problem but the SWF files will not load onto the pages. Any help is appreciated.
Thanks

So you are saying that the SWF *WAS* actually displaying but was somehow unable to present the text?
For others that may wonder about what TLF is (as I did) I'll save you the Google step.
Click here to view
Cheers... Rick

Can not make presenter view work in Yosemite

Can not make

Thank you for your help and patience. I'm trying to understand this so I can fix it if I get in the wrong situation again (which will be shortly before the crowd wants to see the talk).
I gave the same Keynote presentation on the same MacAir a week earlier, before switching to Yosemite, and everything worked the way I wanted. I installed Yosemite and either the default settings changed or Yosemite switched me back to default settings I had unknowingly changed.
I don't remember seeing the word "Extended" during the 10 minutes that I played with this while some of the crowd watched. I turned Mirroring on and off, moved the bar from screen to screen, turned gathering screens or displays (I forget) on and off—and could not get a combination that displayed the presenter view on my MacAir. I just checked Play > Customize Presenter Display and everything is checked or not checked correctly (i.e., I don't use the notes, and they were the only thing not checked).
I looked in Keynote help. "Extended display" and "extended" produce nothing on this. "Mirroring" and "mirrored display" produce nothing helpful, The section on "Present on a separate display" does say "If you’re using Apple TV and are mirroring your display, you won’t see the presenter display on your Mac," but I wasn't using Apple TV so that doesn't apply. Otherwise, it says everything will automatically be right — but nothing was automatically right.
So the next time I am connected to a projector, How do I switch to Extended display? I am certain that at one or more times I had Mirroring turned off, the bar on the left screen, and there was no presenter view. And I don't remember seeing the word "Exended," or ever having these problems in the past.
PS: I now understand what gathering displays does—it puts the controls on the computer rather than the other display. That could use a better name. There's rarely a reason to turn it off, but when you're trying everything why not try "Gathering" because who knows what that means? And that just slows the process down why you fiddle with controlling everything from a screen behind you.

Presenter view won't display

Similar Messages

Maybe you are looking for