Presently used function module for obsoleted FM
hi,
what is the presently used fuction module for obsoleted function module
ws_filenames_get.
Hi,
Use the class <b>CL_GUI_FRONTEND_SERVICES</b>
Check this thread for detail information.
Re: WS_FILENAME_GET is obsolete - what do I use instead ?
Regards,
Maha
Similar Messages
-
Problem using function module for infotype 21
hi
im uploading the infotype 21 (family details) through function module hr_infotype_operations. i found that infotype 0106 (family/related person)
is a secondary infotype and that a record is created for 0106 ,everytime you create a record in 21. so i upload the family data of an employee using the function module for infotype 21 initially. and then fetch the same record from the table pa0106 and modify the same record with other information.
for example : u have the address details of a dependent(father subtype 11) in infotype 21. this address data is stored in the table pa0106 . im not able to modify the record for infotype 0106 using the function module 0106.
i would like to know the reason for the same. Is it because that infotype 0106 is a secondary infotype and u cannot modify the record using the fn module..?/
thanks
sridharanHi Sir,
I am also facing the same issue...i need to update dependents Information Date Of Birth n Perid(Which is stored in IT0106)...in IT 0021..
Kindly correct my code....
I am using the following code for this...
data: w_return type bapireturn1.
data: p0021_struc TYPE p0021,
p0106_struc TYPE p0106,
p_pskey TYPE pskey.
start-of-selection.
get pernr.
p0021_struc = p0021.
p0021_struc-favor = 'Gaurav'.
p0021_struc-fgbdt = '05/10/1955'.
Move p0021_struc-favor to p0021-favor.
p0106_struc = p0106.
p0106_struc-stras = '2235 BOmbay Road'.
p0106_struc-perid = '123456789'.
MOVE p0106_struc-stras to p0106-stras.
Enqueue personnel number
call function 'BAPI_EMPLOYEE_ENQUEUE'
exporting
number = pernr-pernr
importing
return = w_return.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = p_pskey-infty
number = p_pskey-pernr
subtype = p_pskey-subty
objectid = p_pskey-objps
lockindicator = p_pskey-sprps
validityend = p0021-endda " '99991231'
validitybegin = p0021-begda
record = p0021_struc
operation = 'mod'
tclas = 'A'
dialog_mode = '2'
nocommit = p_test
VIEW_IDENTIFIER = '07' "p0003-viekn
secondary_record = p0106_struc
IMPORTING
return = w_return
key = familykey
EXCEPTIONS
OTHERS = 0.
Enqueue personnel number
call function 'BAPI_EMPLOYEE_DEQUEUE'
exporting
number = pernr-pernr
importing
return = w_return. -
Useful function module for get month
Dear experts,
I need some FM to realise some functions :
1, get the month and year from system date
2, get the month by adding or subtracting from a given month ex: month(system date) - 11
Moderator message: date conversion questions = FAQ, please search (harder) before asking.
Edited by: Thomas Zloch on Nov 7, 2010 9:24 PMHi
I think you can find out the answer if you look for it in SDN forum: have you tried?
Max -
Delta Problem while extracting the data by using function module
Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
VenkatHi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya -
Code For Delta Extraction Using Function Module
Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK -
Creating the bussiness roles for the bussiness partner using Function modul
Hi
How to create the business roles using the function modules for the Business partner.You can also assign the role at the time of creation of the business partner itself. Use the function module BAPI_BUPA_FS_CREATE_FROM_DATA to achieve the same.
If your business partner is already there then you can use the function module BAPI_BUPA_ROLE_ADD.
<b>Reward points if it helps.</b> -
hi,
in alv's using fuction modules how to add pushbuttons in application tool bar?Hi Ganapathi,
Check out the list of Function Modules
ABAP_DOCU_DOWNLOAD Download ABAP documentation in HTML format.
APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID will return the IP address of the terminal in hex.
BAL_CNTL_CREATE Create Control for log display
BAL_CNTL_FREE Release Control
BAL_CNTL_REFRESH Put new data in log display
BAL_DB_DELETE Delete logs from the database
BAL_DB_DEQUEUE Unlock log
BAL_DB_ENQUEUE Lock log
BAL_DB_LOAD Load logs from the database
BAL_DB_LOAD Load log(s)
BAL_DB_SAVE Save logs in the database
BAL_DB_SAVE Save log(s)
BAL_DB_SAVE_PREPARE Prepare save
BAL_DB_SEARCH Find logs in the database
BAL_DSP_LOG_DISPLAY Display messages in memory
BAL_DSP_LOG_DISPLAY Display Log
BAL_DSP_LOG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA Output all log header data
BAL_DSP_MSG_LONGTEXT Display message long text
BAL_DSP_MSG_PARAMETERS Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE End output
BAL_DSP_OUTPUT_INIT Initialize output
BAL_DSP_OUTPUT_SET_DATA Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET Assign authorization
BAL_GLB_AUTHORIZATION_RESET Reset authorization
BAL_GLB_CONFIG_GET Read configuration
BAL_GLB_CONFIG_SET Set configuration
BAL_GLB_MEMORY_EXPORT Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET Get current message handle
BAL_GLB_MSG_DEFAULTS_GET Get message defaults
BAL_GLB_SEARCH_LOG Find logs in memory
BAL_GLB_SEARCH_MSG Find messages in memory
BAL_LOG_CREATE Create log with header data
BAL_LOG_CREATE Create log with header data
BAL_LOG_DELETE Delete log (from database also at Save)
BAL_LOG_EXIST Check existence of a log in memory
BAL_LOG_HDR_CHANGE Change log header
BAL_LOG_HDR_CHECK Check log header data for consistency
BAL_LOG_HDR_READ Read log header and other data
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_ADD Put message in log
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHANGE Change message
BAL_LOG_MSG_CHECK Check message data for consistency
BAL_LOG_MSG_CUMULATE Add message cumulated
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_DELETE Delete message
BAL_LOG_MSG_EXIST Check existence of a message in memory
BAL_LOG_MSG_READ Read message and other data
BAL_LOG_MSG_REPLACE Replace last message
BAL_LOG_REFRESH Delete log from memory
BAL_LOG_REFRESH Delete log from memory
BAL_MSG_DISPLAY_ABAP Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT Read Application Log objects table record
BAL_OBJECT_SUBOBJECT Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT Read subobject table record
BP_EVENT_RAISE Trigger an event from ABAP/4 program
BP_JOBLOG_READ Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS Get the change document header for a sales document, and put the results in an internal table.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justified as numbers normally are.
CLPB_EXPORT Export a text table to the clipboard (on presentation server)
CLPB_IMPORT Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT converts any number with zeroes right into a simple integer
Example:
input = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF convert abap spool output to PDF
CONVERT_OTF Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
EXPORTING FORMAT = "PDF"
IMPORTING BIN_FILESIZE = FILE_LEN
TABLES OTF = OTFDATA
LINES = PDFDATA
EXCEPTIONS ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
CONVERT_OTFSPOOLJOB_2_PDF converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK will return the week that a date is in.
DATE_IN_FUTURE Calculate a date N days in the future.
DAY_ATTRIBUTES_GET Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuesday), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD download a file to the presentation server (PC)
DYNP_VALUES_READ Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES Pass in a filename and a path, and will return attributes for the file
F4_DATE displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
begin of t_values occurs 2,
value like kna1-begru,
end of t_values,
t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'BEGRU'
value_org = 'S'
tables
value_tab = t_values
return_tab = t_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
read table t_return index 1.
o_begru-low = t_return-fieldval.
if o_begru-low = 'PAR*'.
o_begru-option = 'CP'.
else.
o_begru-option = 'EQ'.
endif.
o_begru-sign = 'I'.
append o_begru to s_begru.
else.
o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommodate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND Execute a command on the FTP server
FTP_CONNECT Open a connection (and log in) to an FTP server
FTP_DISCONNECT Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
call function 'CSAP_MAT_BOM_READ'
exporting
material = 'MAT100'
plant = '0001'
bom_usage = '1'
valid_from = '20.12.1996'
valid_to
importing
fl_warning = flg_warning
tables
t_stko = tstk2
t_stpo = tstp2
t_dep_data = tdep_data
t_dep_descr = tdep_descr
t_dep_source = tdep_source
t_dep_order = tdep_order
t_dep_doc = tdep_doc
exceptions
error = 1.
Function Group GRAP is now obsolete. SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES Fetch values from a set.
GET_CURRENT_YEAR Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
GET_GLOBAL_SYMBOLS Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY Create a directory on the presentation server
GUI_DELETE_FILE Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY Delete a directory on the presentation server
GUI_RUN Start a File or Program Asynchronously with Shell Execute
GUI_UPLOAD Replaces WS_UPLOAD. Upload file from presentation server to the app server
HELP_START Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks LIKE t001w-werks,
ltab_fields LIKE help_value OCCURS 0 with header line,
BEGIN OF ltab_values OCCURS 0,
feld(40) TYPE c,
END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
ltab_values-feld = t001w-werks.
append ltab_values.
ltab_values-feld = t001w-name1.
append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
fieldname = 'WERKS'
tabname = 'T001W'
title_in_values_list = 'Select a value'
IMPORTING
select_value = lc_werks
TABLES
fields = ltab_fields
valuetab = ltab_values
EXCEPTIONS
field_not_in_ddic = 01
more_then_one_selectfield = 02
no_selectfield = 03.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date like scal-datum default sy-datum,
lc_holiday_cal_id like scal-hcalid default 'CA',
ltab_holiday_attributes like thol occurs 0 with header line,
lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
date = ld_date
holiday_calendar_id = lc_holiday_cal_id
WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
HOLIDAY_FOUND = lc_holiday_found
tables
holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
CALENDAR_BUFFER_NOT_LOADABLE = 1
DATE_AFTER_RANGE = 2
DATE_BEFORE_RANGE = 3
DATE_INVALID = 4
HOLIDAY_CALENDAR_ID_MISSING = 5
HOLIDAY_CALENDAR_NOT_FOUND = 6
OTHERS = 7.
if sy-subrc = 0 and
lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
HR_TIME_RESULTS_GET Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = w_begda
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = w_pernr
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
get_zl = it_zl
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
NOTE: it_zl-iftyp = 'A' absence
it_zl-iftyp = 'S' at work
INIT_TEXT To load long text into SAP
K_WERKS_OF_BUKRS_FIND Return a list of all plants for a given company code.
LIST_FROM_MEMORY Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET It returns all the month and names in respective language.
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE will build a file, and automatically start Excel
OTF_CONVERT wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH Popup to choose a month
POPUP_WITH_TABLE_DISPLAY Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET Read an Entry in an INI File on the frontend
PROFILE_SET Write an Entry in an INI File on the frontend
READ_TEXT To load long text into SAP
REGISTRY_GET Read an Entry from the Registry
REGISTRY_SET Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR Return the active HR Plan
RH_GET_DATE_DAYNAME return the day based on the date provied
RH_START_EXCEL_WITH_DATA starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET Returns all related org info
RHP0_POPUP_F4_SEARK is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
F4 = 'X'
PLVAR = '01'
OTYPE = 'O '
search for any persons
F4 = 'X'
PLVAR = '01'
OTYPE = 'P '
MULTI_SELECT = 'X' to allow multiple selection
EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS Determine last day of month
RPY_DYNPRO_READ Read dynpro, including screen flow
RPY_TRANSACTION_READ Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB Fetch printer spool according to the spool number informed.
RZL_READ_DIR If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL Read a directory on the Application Server
RZL_READ_FILE Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP Hang the current application from 1 to 5 seconds.
RZL_SUBMIT Submit a remote report.
RZL_WRITE_FILE_LOCAL Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT To load long text into SAP
SCROLLING_IN_TABLE If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1 Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET Select a list of external OS command definitions.
TERMINAL_ID_GET Return the terminal id
TH_DELETE_USER Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT Get the UNIX environment
TH_POPUP Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory like bdschko16-target_dir value 'C:\TEMP\',
lc_filter(20) type c default '.'.
li_file_count type i,
li_dir_count type i,
ltab_dir_table like sdokpath occurs 0 with header line,
ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
directory = lc_directory
filter = lc_filter importing
file_count = li_file_count
dir_count = li_dir_count
tables
file_table = ltab_file_table
dir_table = ltab_dir_table
exceptions
cntl_error = 1
others = 2.
UNIT_CONVERSION_SIMPLE convert weights from one UOM to another.
UPLOAD upload a file to the presentation server (PC)
UPLOAD_FILES Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD Save Internal Table as File on the Presentation Server
WS_EXCEL Start EXCEL on the PC
WS_EXECUTE execute a program on a windows PC
WS_FILE_DELETE Delete File at the Frontend
WS_FILENAME_GET Call File Selector
WS_MSG Create a dialog box in which you display an one line message
WS_UPLOAD Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET Get the label from a frontend device.
WWW_LIST_TO_HTML After running a report, call this function to convert the list output to HTML.
I don't think there is any function module for ALV.
Even for more info Checkout the links
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Regards,
Chandru -
How to lock transaction using function module or something like that
Hi, all
I'd like to know the way to lock transacitons using function module or something like that.
I know this would be possible if calling transaciton SM01, but I want to know other ways like calling function module (BAPI ) or method.
Thank you for your cooperation In advance.
Regards,
Hideki KozaiHi,
Try the following FM
BRF_NETWORK_GRAPHICS BRF: Network Graphics for BRF Objects
BRF_INITIALIZE_GRAPHICS_NGR BRF: Initialize Network Graphics
BRF_NETWORK_GRAPHICS_NGR BRF: Network Graphics: Start
BUSG SAP Business Graphics
GRAPH_2D Calling up the 2D business graphics
GRAPH_2D_MENUE DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_3D Calling up the 3D presentation graphics
GRAPH_BUSG_COLOR_SET Definition of color pallets for business graphics
GRAPH_BUSG_MENU_SET Pushbutton menu (tool bar) for all BUSG modules
GRAPH_MATRIX Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D Calling up a 3D graphic (4th dimension stacked representation)
Regards, -
Data transfer of Selected sets (QS51) using Function modules
Hi All,
I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field RQSKT-AUSWAHLMGE is not present on screen 1000.. In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE and QPAM_SELECTED_SET_CREATE
The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
QPAM_SELSET_CODE_CREATE contains fields KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
Runtime: 6.496 Microseconds
Exception WRONG_KEY
Message ID: QS Message number: 299
Message:
No entries were found in catalog 1
MAN WERK K AUSWAHLM CODEGRUP CODE
300 WI10 1 DDTEST THREADS 1
QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?Note 381286 - Code grps + selectd sets:Transport request requestd
Note 592418 - Composite SAP note: Transport of code groups and codes
But I do not recommend a modification because the system does not generate request for that in the production system.
This means you can maintain catalog directly without transport in the production system.
Only development or test system ask you a request number.
Regards
Luke -
Function Module for Revision Level.
Hi all,
Is there any function module to retrieve details of MM and PO Revision Level..
In MM it is present in basic View..in AEOI table..,but i still go for function module.
Thanx in advanceHi,
BAPI_PO_DETAIL1
REVISION_LEVEL_SELECT
CCAP_REV_LEVEL_MAINTAIN
Also,
1.You can see this revision changes history in the version tab itself.
2.You can also get from PO - Environment - Header changes details.
3.Check the table EREV Version in Purchasing in SE16. This will give all the required details for the PO.
4.You can fetch the data from this table to appear in the PO print out.
If you want to know the material revision level as of some date then you can use function module REVISION_LEVEL_SELECT. Pass material & date and it will tell you the active revision on that date.
If you want to know the table, then AEOI where you can enter the material no in field OBJKT & AETYP as 41 (Material). You will get the list of revision levels for the material.
thanks & regards,
ShreeMohan -
How to upload Excel file in BI using function module in abap program
How to upload Excel file in BI using function module in abap program?
Hi Anuj,
To upload the file , you can try a standard program "RSEPSFTP" .
while you execute the program , a selection screen appears in which the inputs should be give as
RFC destination - The target server name
FTP command- PUT
local file - your file name
local directory - path of your local file
remote file - your target file name
remote directory - where it has to be stored
Hope this is useful for you
Thanks & regards
Anju -
How to maintain Ztable using function module instead of SM30
Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'S'
VIEW_NAME = 'Table Name'
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
OTHERS = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed -
How to create the INBOUND Function Module for INBOUND IDOCs
Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
GaneshHello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe -
How to config Check Digits function module for Student Number Validation
Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi -
Function Module for FB01 Vendor line items postings in 3.1 Version
Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
SubbaHi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful.
Maybe you are looking for
-
When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?
-
Cannot install Office 2013 during task seqeunce after installing R2
Hi, Since we installed SCCM 2012 R2, I have not been able to install Office in my baseline captures using a task sequence (64-bit OS). Ronni Pederson suggested using an Application rather than a Package but in his example, the application is being pu
-
Maximum Thunderbolt/VGA resolution for external displays?
Hi there Until recently, I've been using a Macbook Air Core 2 Duo with a MiniDisplayPort output. This is connected via the Apple MiniDisplayPort > VGA adaptor to an LG Flatron W2246 22" display, and running 1920x1080 quite happily. I recently bought
-
[HELP! ] why my program thows a javax.swing.text.ChangedCharSetException?
there's the source: import java.io.*; import java.util.*; import java.awt.*; import java.awt.event.*; import javax.swing.*; import javax.swing.event.*; import javax.swing.text.*; import javax.swing.text.html.*; import javax.swing.border.*; class HTML
-
Elements 7 issues with opening editor
I purchased Photoshop Elements 7 last year for my previous computer, however i recently got a new computer. It is a Dell with Windows Vista. So I downloaded Elements 7 on my new computer and when i try to use the Edit portion of the program I get an