Preserve ipod display columns after eject and remount

Since the search function is currently disabled on discussions, I'm posting this in the hopes that someone might know the answer: how do I change the default column settings when I mount my ipod in itunes? I'm running the latest versions of everything. 80GB ipod. I set up the columns the way I like them (size, kind, time, no genre, etc) and then when I eject and remount the ipod, the columns are all back to the way apple wants them to look and not how I want them to look. it's not even a restarting itunes issue; I've kept itunes open while testing it and the columns always reset when I remount the ipod. I do have "remember view setting for each source" checked, but that seems to ignore the ipod as a "source".

it has been fixed, sort of. the columns are preserved except for size, which is very odd. I prefer to keep the size column handy while I organize files and eliminate duplicates. It also does not remember my "show browser" setting.

Similar Messages

  • Why my ipodmy ipod displays do not disconnect and wont sync but can be restored?

    why my ipodmy ipod displays do not disconnect and wont sync but can be restored?

    If it is a problem than I have it too. Mine does the
    same as long as I don't stop the device via the
    little green arrow icon (USB manager) down by the
    clock.
    I never really need to use the Ipod when it is hooked
    into the PC because everything is done through
    iTunes. I just thought it said "do not disconnect"
    because it was associated with both iTunes and the PC
    as a hard disk.
    If I stop the device or "eject" the iPod, it goes
    from do not disconnect to the normal menu tree.
    So when you take the USB cable out of the iPod, it goes back to normal?
    If that's what you mean, mine does that too.
    It's just that I read that if you remove the USB cable from your iPod while it says 'do not disconnect', it can wipe all your music....

  • Why  ipod displays do not disconnect and wont sync but can be restored?

    why  ipod displays do not disconnect and wont sync but can be restored?

    Have you tried resetting your iPod while connected? Then, unplug it, and connect it again.
    Have you tried putting your iPod into disk mode, then connecting it to your computer again?
    Check out this Five R's -> The Five R's
    Also, see all the suggestions in this article, to start with getting your iPod recognized by your computer -> iPod is recognized by Windows but not in iTunes
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • IPod display is upside down and mirror image - fixable?

    The display on my mom's iPod display is upside down and mirror image. I can read the menus if I hold the iPod horizontal, and look into a mirror about six inches in front of my nose, but it's inconvenient.
    I have tried the 5 R's (except for upgrading the Mac OS 10.3.9 - she has an 800 MHz G3 iBook and won't support Leopard). Apparently the songs all reloaded and play OK, but the display is hard to read without (and with!) the mirror.
    I found a similar help request from last June, but no solution.

    I have the same problem, have you found a solution.
    Janet1960

  • IPod erases songs after ejected?

    Hi, I hope someone can help me with my problem.
    Last night I tried putting a few more songs on my iPod 5th Gen. It stopped copying and iTunes didn't see my iPod anymore. I disconnected it, and tried plugged it back in via USB. All of my songs were erased, including pictures and videos. iTunes wasn't seeing my iPod and Windows was giving an error, so I tried to restore it the first time and it gave a Delayed Write message. Very frustrated now, I restarted, plugged in my iPod and it restored perfectly. Then I tried putting songs on it and I had all my songs back on, ready to go. I ejected the iPod and all of my songs and videos were erased, but my pictures were still there. Now I'm getting a folder with an exclamation, and I've tried all of the suggestions on the Support page.
    My iPod is just a little over a month old and it's frustrating to see something I spent a lot of money on not working.
    Can anyone help me with this problem?
    Thanks,
    Matt

    I had just figured out how to fix this problem, believe it or not!
    First exit out of iPod Updater and iTunes.
    Get into Windows Task Manager, click Processes tab.
    The iPodService.exe, iTunesHelper.exe must be messing around with the iPod. End those processes and any other that has to do with your iPod or iTunes, and keep your iPod connected while you do this. Then run the iPod updater and it should work if you want to restore.
    That fixed my problem!
    I hope Apple does something about this in a new version of iPod Updater so people (like me) aren't freaking out that their iPod is messed up.
    I'm just babying my iPod, so after each album I'm ejected just to make sure everythings alright. But everything seems to be working Aye-Okay!

  • Display Columns from WBS and Activities in the same Report

    Does anyone know how to display Columns from a WBS and an Activity together so that they can be output to Excel?
    I need WBS Code, Actual Start, Actual Finish and Performance % Complete from the WBS and Activity Codes from Activities.
    I can produce them in a report but this gives me all the activities in a heirarchical format which then necessitates deleting the activity lines in Excel
    The Performance % complete which I want is available in Activities at the Summary Level but the Activity Codes are not at this level
    I could put the Activity Codes in as Project Codes at the WBS level but this will require a lot of maintenance
    Maybe someone knows an easy way to do this?
    John
    Edited by: user9088233 on Feb 3, 2010 11:50 PM

    user9088233,
    Your request interested me so I gave it the old college try. There are several ways to go about this task but here's one that is fairly quick and easy.
    I carefully read your description of what you need from P6. I've built a test layout using the fields that you outlined. Here's what I came up with. This should bypass the issue of having to create a P6 export. My solution is to build a customized layout in P6 and copy that info and paste it into an Excel spreadsheet.+
    Open P6
    Open neccessary projects & open a new layout containing these columns:
    ....Project, WBS,Activity ID, Activity Name, Perf. %, & (any codes or user defined codes)
    Group & Sort by: Project, WBS
    ....*Display Options* = "Show Group Totals" & "Show Summaries Only", Choose "OK"
    ....*Edit*, Select, All, Copy
    Open Excel
    ....Paste Highlighted data into your new worksheet.
    Hope this helps but it's usually hard to understand exactly what you need unless I can view your data,
    Good Luck & let me know how it turns out,
    p3_scheduler
    Edited by: p3_scheduler on Feb 8, 2010 2:40 PM

  • DISPLAY COLUMN NO'S AND ROW NO'S IN SMARTFORMS

    HI ALL,
    I M HAVING REQUIRMENT TO DISPLAY COLUMN NUMBERS AND ROW NO'S IN SMARTFORM
    I'M NEW TO THIS PLS SUGGEST ME.
    THANK YOU ALL IN ADVANCE.
    Moderator message: please search for information and try yourself before asking, do not post in all upper case.
    Edited by: Thomas Zloch on Nov 19, 2011 10:31 PM

    That's good news! You've found another way for the same result. It depends on what is needed. SumIf is more for adding the the totals of a numeric column based on the values of another column. For example, What is the total of column B responses that have "yes"?
    Regards,

  • Plugged in ipod.. synched.. ejected and all songs were gone.

    I just plugged in my ipod, it showed up in iTunes, then i syched 3 new songs onto my ipod. I safely ejected it, and all of the my songs, and playlists and tv shows were erased.. i have no idea what just happened. and i tried to plug it in again to put them back on and it says i need to register it and stuff.

    Did you upload the other songs from the same PC/Mac with the same media library?

  • No remounting after eject and reinsert.

    Isn't the iPod shuffle supposed to "mount again" if one ejects it, removes it and then re-insterts it again?
    That doesn't happen for me. I have to restart or put my machine to sleep for it to be detected "a second time".

    I got a similar problem, then I realized that iTunes was set to eject the shuffle after fill it, I unchecked that option and Shuffle remounted again..

  • IPod loses everything after syncing and ejecting from iTunes 11.0.4

    hey there,
    After updating my iTunes to 11.0.4, I have been having trouble with syncing songs into my iPod 160GB. At the start it would sync and everything was cool until i ejected my iPod and everything in my iPod was gone, I plugged it back into my iMac and iTunes said I had to restore my iPod, I did just that. Now each time I plug my iPod to my iMac and sync songs, it would say sync complete but after i ejected my iPod, there will be nothing in my iPod and I have to continuosly restore my iPod.
    I have tried reseting the iPod itself and then do a restore through iTunes but the problem won't go away. Any help will be much appreciated
    Thanks

    Hello RichardWB,
    Thanks for the question. I understand you are having issues with your iPod classic appearing in iTunes. The following article outlines potential resolutions:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks,
    Matt M.

  • Ipod displays friend's playlist and not mine

    Hey everyone,
    A couple days ago my friend brought his ipod mini over so we could listen to his music on my computer. After we were finished with it I just unplugged it from the computer without ejecting it...just not thinking. Anyways, I then plugged in my ipod to listen to some music (I am studying in the UK so i brought my ipod over so i could listen to songs on the computer i have here) and instead of coming up as "Heath's Ipod" it came up as my friend's ipod under "Raymond's Ipod" and had his playlist displayed on the itunes screen. However, I couldn't play any of his songs and my songs didn't even show up. Also, my Ipod is showing his songs but cannot play them. It also says that my ipod is still full (3.7 gigs) but just won't show my songs. I would just reformat the ipod but I don't have any of the music over here because it's on my computer back home. If anybody can help me out I would really appreciate it! Thanks.
    Heath
    HP Pavilion dv4000   Windows XP  

    You can rename it b plugging it into iTunes, double clicking the name and typing in the name you want it to be called, if you want to change the ownership you need to ring up apple.

  • SSRS Report Viewer display issues after KB2888505 and now KB2898785

    After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
    to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change.  Rolling back KB2888505 was a temp fix for my
    users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar.  The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time.  Others have reported this same issue so
    maybe we can get more visibility on TechNet.    

    Hi,
    These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
    If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
    Karen Hu
    TechNet Community Support

  • 'Audiobooks' menu on ipod displays chapters (allmixed up) and not Titles

    I have imported many Audiobooks, from CD's I own, to iTunes. I have transferred them from the 'Music' Library to the 'Audiobooks' Library by clicking 'get info', then 'options' and then setting 'Media Kind' to 'Audiobook'
    They are of course stored like music albums, with Book chapters instead of tracks and book titles instead of Albums. Therefore in iTunes 'Audiobook' Library, when you click 'view' and 'as cover flow' you can scroll through all the book titles and view the sequential chapters of that book all stored as it should be. Perfect.
    However, on new iPod Classic 120gb, when you select 'Music' and then 'Audiobooks' it doesn't open into book titles, it opens straight into chapters (tracks) What's worse is that all the chapters from all the different books are mixed up so there's nothing even sequential about those chapters. I just have a jumbled mess of mixed up chapters. Now if I transfer the audiobooks back to the 'Music' Library then I can browse Book titles by clicking 'Music' then 'Albums' and by selecting a title I can browse the chapters in it all as they should be.
    So what am I doing wrong? How do I store my audiobooks in the 'Audiobooks' Library in a way that is usable?
    Many Thanks in advance to anyone who can save me from pulling any more of my hair out!!!!!

    For what it's worth here's a suggestion I've previously thrown at iPod Feedback without any obvious success. Feel free to adapt and add your own voice.
    *Audiobooks behaviour*
    It seems the original idea for this feature was one audiobook, one file. In practice many audiobooks are released as albums with chapters taking up one or more tracks. The iPod Audiobooks menu should behave similarly to the Podcasts menu. Ideally audiobooks should be grouped into authors, then into books displaying album art. The tracks of Audiobooks should have an unplayed flag like those for podcasts which should be extended to display a half-circle for files that have been partially played. Clicking Play on an audiobook should start playing the first unfinished track from the bookmarked position. Select should display the list of tracks with the most recent unfinished track pre-selected in the list. When playing in sequence the next track (played or unplayed) would start playing from the beginning rather than the book-marked position. Next would first skip to any bookmark in that file, then the next track.
    tt2

  • IPad 2 - iPod display change between Playlists and Music

    Is there a way to set the iPod in the iPad 2 to display a song listing when in a playlist, but display the album listing when in the Music section, like in iTunes?

    Is there a "New" button at the top right of the Playlists section of Music?
    There is no Edit button to delete music, swipe sideways on the song to reveal the delete button. Tap and hold on the artwork in Artists and albums to reveal the (X) button to delete. Or connect the iPad back up to iTunes on the computer and check your sync settings for music to ensure you are syncing the right content.

  • IPod display shows Apple logo and does nothing...

    I bought my iPod 4 days ago and it was working fine until this morning when I went to turn it on and the screen displayed only the Apple logo and would do nothing else. I attempted to reset it and I plugged it into my computer and still nothing would happen. I also noticed that it is making a rattling sound when I move it, though I have not dropped or damaged it in anyway that I am aware of. Please help.

    ive had this problem before..if you hold down both the menu button and the center button at the same time until it shuts off, it will restart. try that and see if you can fix it.

Maybe you are looking for

  • Cloud overseas

    I want to set use cloud whilst overseas and use it by paying with a local credit card but I cannot change my location of my adobe ID. Can i pay for the cloud services using paypal?

  • How to stop caching on the server

    Hello, Can anyone please guide me as to how do we disable caching on the portal server since the changes i am making in the JSP pages are not reflected immediately. I have already cleared the browser cache but now i want to clear the cache on the por

  • Automator Workflow to export Numbers documents in PDF format

    Does anyone know of any automator workflow to export Numbers documents in PDF format? I tried this program: Convert to PDF 1.2 http://www.apple.com/downloads/macosx/automator/converttopdf_mauriziominelli.htm l But it gives an error.

  • How to break a Report Field

    Hi, I have a field in a report which is of 300 characters and it comes printed in a straight line. what is the procedure to break it into size of 40 characters. Thanks, Ameya

  • NQS Error 46036

    Hi, I am getting the following error -------------------- Query Status: Query Failed: [nQSError: 46036] Internal Assertion: Condition pExpr->IsValueExpr(), file server/Query/Optimizer/Request/Src/SQORRqList.cpp, line 267. The report is working fine,