Preset problems

For the first time since upgrading to 1.1 I'm having a problem. It happens when I apply multiple presets, say WB, curve, tone, punch. Now say I don't like what the punch did so I ctrl Z to undo only nothing happens to the pic. The only thing that happens is the highlighted preset will return to the one before that, in this case it would be the tone preset.
If I ctrl Z again then it will make the change disappear on the pic. I've tried mousing up to the nav bar and selecting undo but I get the same results.
This is the first time this has happened, at least that I have noticed. I tried closing/reopening LR that made no difference.
Any ideas?
Thanks,
Eric

Nobody has any ideas? I find it hard to believe that I'm the only one with this problem.
Eric

Similar Messages

Mpeg2 preset problem

So, I've been trying to export using the mpeg-2 60 minute high quality encode preset. The encoding appears to go off successfully in the batch monitor. However, the file that is exported appears as an unrecognizable file type. It appears just as a blank icon. However, when I double click on that file, droplet opens and can encode a .mov, heavily compressed version of my original project file. I feel like I have a problem with my settings in the mpeg-2 preset, and therefore cannot get my mpeg-2 file. However, I cannot find the problem. I tried posting about this a few days ago and no one had any ideas. Does anyone know what my preset problem might be?

This may be an old problem (.m2v file kind) for which I've posted the fix several times. Not all of you may have the same cause, so this may not work for everyone. But here is a llnk on how to fix this (perhaps). Oh, by the way, this is an apparent QuickTime 7 bug.
Waymen, "Finder relaunches when viewing M2V file info ..." #1, 03:54pm Sep 14, 2005 CDT<small><hr width="75%"><small>If this suggestion helps in any way, a confirmation or acknowledgment would be appreciated, since that would also help others who may be having the same difficulty. Do for others as you would have them help you.<center>Thanks for sharing, Waymen.</center></small>

Printing Presets Problem, Not Retaining Settings Assigned To A Preset.

Hi
I have a 10.5.8 client computer that is experiencing problems with saved printer presets not retaining the paper tray assigned to that preset. It works for other printers but not this one particular printer. I have tried the following.
1. Repair disk permissions.
2. Delete the troublesome printer presets and recreate them.
3. Reset printing system and re-add printers and recreate all printer presets.
4. Ran Onyx maintenance scripts, cleared caches, etc.
5. Re-applied 10.5.8 combo update.
Any suggestions would be greatly appreciated.

Hi xenainoz
In SAP DMS Whatever document that are linked to an Object Such as PO, PR , Material, WBS element, Sales order Item cannot be printed directly.
Mean Suppose if you are Printing PO and want to Print also Documents linked to PO line items , this is not possible in standard SAP.You will have to do ABAP Enhancements.
Please check this link . hope you will get some idea.
When PO is Mailed to vendor the DIR Original should also go as addn attachm
With Regards
Mangesh Pande

Uncompressed 8-bit Preset problems

Hi,
I'm trying to solve a jaggy text problem by creating a new uncompressed 8-bit sequence (which I've never used before).
I try using the preset for Uncompressed 8-bit and click OK... but then I get the following message:
"Video Compressor Uncompressed 8-bit 4:2:2 was not found. Please check that the hardware is present and enabled for this compressor. Setting the video to Animation."
I'm not sure what this means. Do I need a better Video Card? (My friend has FCP 5 on his old 867MHz Powerbook and it works fine on that... so I can't see how my dual 1 GHz doesn't have the right hardware...).
Please advise if you have encountered this error...
Thanks.
G

The file... it's not a file but an edited sequence... I "captured" it using firewire DV preset... miniDV consumer camera.
Edited the whole show into a 30 second sequence.
Was trying to put superimposed title graphics which were "jaggy"
Someone suggested creating an uncompressed sequence and then cutting in the DV sequence and graphics into it...
But I couldn't create the uncompressed sequence.
I tried creating a brand new project using the uncompressed preset... and got the same error message.
G

D200 white balance presets problem or ACR problem?

Last night I was playing around with my D200 and an SB800. The scene was just a sofa with a Gretag-Macbeth 24 Patch Color Checker. The object was to see what results I got with the SB800 with the D200 set to the various preset White balance values. (I should point out that the lighting was mixed, but that is not relevant to the results I see.)
I set the D200 to each of the preset white balance values and then opened the NEF file in ACR. The preset temperature (from the D200 Manual) and the temperature/tint values reported as "As shot' by ACR are shown in the table below.
D200 ACR 'as shot'
preset temperature/tint
tungsten 3000 2950 / 0
fluorescent 4200 3950 / +31
daylight 5200 4950 / -3
flash 5400 6150 / -9
cloudy 6000 5550 / -7
shade 8000 7100 / +3
First of all I don't care if the temperature reported by ACR agrees with the preset temperature quoted by Nikon. What puzzles me is the discontinuity in the values reported by ACR when going from 'flash' to 'cloudy'. Is this a problem with ACR or with the Nikon preset values for these two settings?

>First of all I don't care if the temperature reported by ACR agrees with the preset temperature quoted by Nikon. What puzzles me is the discontinuity in the values reported by ACR when going from 'flash' to 'cloudy'. Is this a problem with ACR or with the Nikon preset values for these two settings?
Bob,
A full answer to your question would require a response by Thomas Knoll or some other ACR expert with knowledge of how Nikon records the white balance and the algorithm used to apply the white balance. However, I can bring up a few points which may shed some light on the matter.
One should first consider what white balance information Nikon cameras write to the NEF file. The following table refers to the D70 and similar Nikon cameras before encryption of the WB.
http://www.ozhiker.com/electronics/pjmt/jpeg_info/nikon_mn.html
The settings of daylight, flash, tungsten, etc are written as descriptive strings, not actual degrees Kelvin. Nikon considers daylight to be 5200K, but Thom Hogan writes that this value often produces a blue result and 5400K might be better.
The bias value refers to fine tuning between the above descriptive settings, approximately 100 Mired per increment. Finally, the red and blue coefficients are recorded (green would be redundant). Some raw converters such as DCRaw use these coefficients for the "as set" white balance. There is nothing corresponding to the ACR tint, which adjusts in the magenta green axis, whereas the color temperature slider adjusts in the yellow-blue axis. The degrees Kelvin figure specifies the white balance only for a black body radiator.
Thus there several ways to interpret the WB data. Mr. Knoll has written previously that ACR attempts to produce a neutral white balance appearance rather than the WB numbers. An interesting experiment would be to determine which converter (ACR or Nikon Capture) gives a more neutral white balance on your color checker with the above settings.
Bill
http://www.adobeforums.com/cgi-bin/webx/.3bbc87b2/0

Import preset problem

A warm welcome to the Import Preset; except I'm having a problem. I have saved a few presets but when I select them only the panels on the right are changed so I see, for example, Add (to) My Catalog and Develop Settings and Metadata are just as I have set them. BUT "Select a Source" says just that, when I'd like it to go to the folder from which I want it to import. BTW there is no card in the reader, this is just an import from a folder into the catalog.
Should the preset "remember" the folder to import from, or have I misunderstood?

Should the preset "remember" the folder to import from, or have I misunderstood?
No, only the "rest" of Import dialog. The concept is: a preset remembers "how to treat the files you are importing" from any location.

Kelby preset problem

I recently purchased Scott Kelby's book for Lightroom 5 and downloaded/imported presets (for develop/print modules) from "kelbytraining.com/books/LR5" into one of my catalogs. The catalog's print module is no longer functioning properly. Selected images from the film strip do not show up in the main window. Most of the right panel options are not working and scrolling through the template browser shows the variations in the preview panel but nothing appears in the primary display area. I've manually deleted the presets from Kelby but the problem remains. Any way to restore default settings? I have a total of 4 lightroom catalogs. The other three are operating properly. Running Windows 7, 64bit.

OK - there were some presets left in the develop module that were apparently the offending gremlins. Deleted them from within Lightroom and from windows explorer. Print module back to normal. I think they were develop presets created for Lightroom 4 that I had also downloaded/imported that were creating the problems. Thanks anyway.

Garageband Amp Sim Preset Problem?

Hi everyone. I just had to reinstall Garageband 2, and I was playing around with the Amp Simulations when I noticed something that I wasn't sure was a problem or not. When I click on "Manual" to select an Amp Type, in addition to "American Clean," "American Crunch", "American Lead," and so forth, there is also "Big Wheels," "Classic Rock," "English Channel," and "Thick Jazz," which is kind of weird seeing as how those are also Amp presets.
I did a clean install, but this seems odd for some reason. Are these Amp types supposed to be under the Manual setting? What are other people's settings?
Thanks in advance!

It seems the Manual menu is only presets. If you click on the pencil icon, the amp controls open, there are both he manual tab as well as the "Model" tab. The Manual is the presets, and the model sets the amp. I don't use them, but I think yours are OK, since mine are the same as you describe.

Mail preset problem (?)

hi there,
To mail my pictures I'm used to exporting them to my desktop, from where I collect them together and drop them directly into a message that I prepare. Without having changed any presets (that I know of (?)) recently my messages are received with two versions of any photo, of which one of them cannot be opened by the receiver. (for example a jpeg with export preset (to my desktop) "fitt between 1024x1024" is received in mail as a jpg version of 57,8 KB and a jpg of 1.05 MB, the latter the one that can be opened. When I sent directly tru File/Email this thing doesn't occur (?)
A lot of words for a small problem, but I cannot find the setting to return to the original situation. Can somebody help?

Start up Mail. Start up Help. Type 'windows friendly' in the search box and hit ENTER.
Help will display a text that describes problems that Windows users have with items sent from a Mac.
The solution is to set Mail to send Windows frindly attachments.
Under Edit>Attachments you will be able to set that option.

PDF Preset problems

Since updating InDesign last night I now only have japanese presets when trying to create a pdf.
I have followed the helpon the web and gone into users/application support/Adobepdf/extras to put the .joboption files into settings but there is nothing of relevance. Any ideas?

On mine the Extras folder holds the Japanese .joboptions files; the Settings folder holds the others.

Import / Export Script Presets problem

Hi all,
I've an issue when trying to import / export custom scripts using the import/export presets command in CS6.
I like to have custom scripts accessible under the File > Scripts menu, so I keep them in the Application / Presets Folder. I've found if I store them in the Users/ Presets folder they don't appear under the File > Scripts menu.
If I use the Export Presets command, I can't export custom scripts stored in the application folder, only if I have them stored in the User/Preset directory.
If I go to another machine and use the Import Preset Option, I can get it to import the custom scripts from a back up folder, but they get installed in the User/Presets directory, so I end up having to manually move them afterwards.
Is there a way around this ? It's great being able to package the presets and quickly install them elsewhere, but at the moment I'm still having to move the scripts by hand
Mac 10.6.8 PS 13.01

HI,
I've no idea why you get that error, but there's a simpler way to transport your bookmarks to another machine.
/Users/YourUsername/Library/Safari/Bookmarks.plist
Copy that file to the equivalent location on the other machine and that's it.

Animation Preset Problem

When I add an animation preset to my text layer, it works, but it also adds the words Adobe After Effects below the first layer of text slightly overlapping the text. Does anyone know why that is happening? It never did that before and I did purchase a full copy of the program from Adobe's website. Thanks!

It's just placeholder text. Some of the text animation presets add placeholder text that you can replace with your own. This mostly happens with the animation presets that involve text on a path.

Photoshop CS5 Printing Preset Problem

I am trying to print from Photoshop CS5 to a Konica Bizhub c451 printer that uses account tracking and user authentication. But, when attempting to print from photoshop CS5 the printer preset doesn't have the same options (doesn't allow us to put in owner information) as the other CS5 products. For example I am able to print from Illustrator CS5 but not Photoshop CS5. I am also able to print from Photoshop CS3 on the same computer but not CS5. Any ideas?

SomeOne121 wrote:
Any other suggestions?
Get a updated driver that supports application running in 64bit mode, or a new printer with drivers that supports application running in 64bit mode.

Lightroom printer preset problem

Hi - just upgraded to the latest Lightroom CC - the settings in my print presets are not translating into my printer settings - I just get the default printer setup, which results in the layout of the cells getting messed up. Using Windows 8.1. Also I now have to start the Print Spooler service manually - suggestions please?

Do you mean it's supposed to go to CS6, but opens CS3 instead?
That could happen if you have uninstalled an intermediate version after installing CS6. Yes, it's a long time bug in the installer. I believe reinstalling CS6 over itself will correct it.
EDIT: either that, or what web-weaver said.

Define brush preset problem?

I'm trying to turn a logo into a brush but the "define brush presets is greyed out", what am i missing here? I've created brushes before but can't get this one to work, not sure why. Any suggestions?

DC3photography wrote:
I'm trying to turn a logo into a brush but the " is greyed out", what am i missing here? I've created brushes before but can't get this one to work, not sure why. Any suggestions?
You must select the logo first (or an area round it).

Preset problems

Similar Messages

Maybe you are looking for